| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <52CF90264091A14888078A031D780F4302F89338@ism-mail03.corp.ad.wrs.com>
Date: Mon, 16 Nov 2009 04:25:43 +0100
From: "Feng, Xiaobing" <Xiaobing.Feng@...driver.com>
To: <linux-kernel@...r.kernel.org>
Cc: <linux-serial@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<giancarlo.asnaghi@...com>,
"Wallin, Anders" <Anders.Wallin@...driver.com>,
"D'Agostino, Raffaele" <raffaele.dagostino@...driver.com>,
"Li, Li" <Li.Li@...driver.com>,
"Tang, ChunQiang" <ChunQiang.Tang@...driver.com>
Subject: [PATCH 2/2] Uart driver for ST Microelectronics ConneXt(STA2X11/STA2X10).
Hi
The patch is a serial driver for PL011 UART base on PCI
express. It was develop for ST Microelectronics's ConneXt board.
ST Microelectronics ConneXt(STA2X11/STA2X10), a PCI express
multifunction chip that provides Input/Output capabilities.
This driver derive from drivers/serial/amba-pl011.c, I added PCI
express feature and some platform-dependent features in it, which make
it support PL011 on ConneXt as a PCI express device.
The patch has been checked by scripts/checkpatch.pl .
>From a567d7644d15b4eb0ae511f4e02307e62be127c9 Mon Sep 17 00:00:00 2001
From: Billy <billy@...ly-laptop.(none)>
Date: Fri, 13 Nov 2009 18:17:04 +0800
Subject: [PATCH] Add pl011 uart support for STMICRO's ConneXt, which
base on PCI and derive from Amba-pl011.c
Signed-off-by: XiaoBing Feng (Billy Feng) <xiaobing.feng@...driver.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@...com>
---
drivers/serial/Kconfig | 10 +
drivers/serial/Makefile | 1 +
drivers/serial/pl011-pci.c | 949
++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 960 insertions(+), 0 deletions(-)
create mode 100644 drivers/serial/pl011-pci.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6553833..c42c402 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -331,6 +331,16 @@ config SERIAL_AMBA_PL011_CONSOLE
your boot loader (lilo or loadlin) about how to pass options
to the
kernel at boot time.)
+config SERIAL_PCI_PL011
+ tristate "PL011 serial port based on PCI support"
+ depends on PCI
+ select SERIAL_CORE
+
+config SERIAL_PCI_PL011_CONSOLE
+ bool "Support for console on PL011 serial port based on PCI"
+ depends on SERIAL_PCI_PL011=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_SB1250_DUART
tristate "BCM1xxx on-chip DUART serial support"
depends on SIBYTE_SB1xxx_SOC=y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a2998..e8e5cfd 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+obj-$(CONFIG_SERIAL_PCI_PL011) += pl011-pci.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
diff --git a/drivers/serial/pl011-pci.c b/drivers/serial/pl011-pci.c
new file mode 100644
index 0000000..6783b0d
--- /dev/null
+++ b/drivers/serial/pl011-pci.c
@@ -0,0 +1,949 @@
+/*
+* linux/drivers/serial/pl011-pci.c
+*
+* ST Microelectronics ConneXt(STA2X11/STA2X10) UART file
+* derive from AMBA-pl011.c
+*
+* Copyright (c) 2009 Wind River Systems, Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+* See the GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
USA
+*
+*/
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+
+#if defined(CONFIG_SERIAL_PCI_PL011_CONSOLE) &&
defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#define DRV_VERSION "1.0.0"
+#define PCI_PL011_DRIVER_NAME "ttyAM"
+#define PCI_PL011_MAJOR 204
+#define PCI_PL011_MINOR_START 16
+#define MAXPORTS 1
+#define UART_NR 4
+#define PL011_HWFC 1
+#define PL011_NO_HWFC 2
+#define AMBA_ISR_PASS_LIMIT 256
+#define UARTCLK 32000000
+
+#define UART_DR_ERROR \
+ (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+
+#define UART_DUMMY_DR_RX (1 << 16)
+#define SZ_4K 0x00001000
+
+static LIST_HEAD(pci_pl011_adapter_head);
+/**
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+ struct uart_port port;
+ struct clk *clk;
+ unsigned int im; /** interrupt mask */
+ unsigned int old_status;
+ unsigned int ifls; /** vendor-specific */
+};
+
+struct pci_pl011_adapter{
+
+ u8 rev; /** PCI revision ID */
+ struct pci_dev *pci_dev;
+ int type;
+ int index;
+
+ spinlock_t intr_lock;
+
+ u32 irq; /** Interrupt request number */
+ u64 intr_count; /** Count of interrupts */
+
+ u64 membase; /** Start of base memory */
+ u64 membase_end; /** End of base memory */
+
+ u8 __iomem *re_map_membase;/** Remapped memory */
+
+ u64 iobase; /** Start of io base */
+ u64 iobase_end; /** End of io base */
+
+ int numb_ports;
+ struct uart_amba_port port_info[MAXPORTS];
+ struct list_head pci_pl011_adapter_entry;
+};
+
+
+
+/** There is by now at least one vendor with differing details, so
handle it */
+struct vendor_data {
+ unsigned int ifls;
+ unsigned int fifosize;
+};
+
+static struct vendor_data vendor_st = {
+ .ifls =
UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fifosize = 64,
+};
+
+static void pl011_stop_tx(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im &= ~UART011_TXIM;
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_start_tx(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im |= UART011_TXIM;
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_stop_rx(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
+ UART011_PEIM|UART011_BEIM|UART011_OEIM);
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_enable_ms(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im |=
UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_rx_chars(struct uart_amba_port *uap)
+{
+ struct tty_struct *tty = uap->port.state->port.tty;
+ unsigned int status, ch, flag, max_count = 256;
+
+ status = readl(uap->port.membase + UART01x_FR);
+ while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
+ ch = readl(uap->port.membase + UART01x_DR) |
UART_DUMMY_DR_RX;
+ flag = TTY_NORMAL;
+ uap->port.icount.rx++;
+
+ /**
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(ch & UART_DR_ERROR)) {
+ if (ch & UART011_DR_BE) {
+ ch &= ~(UART011_DR_FE | UART011_DR_PE);
+ uap->port.icount.brk++;
+ if (uart_handle_break(&uap->port))
+ goto ignore_char;
+ } else if (ch & UART011_DR_PE)
+ uap->port.icount.parity++;
+ else if (ch & UART011_DR_FE)
+ uap->port.icount.frame++;
+ if (ch & UART011_DR_OE)
+ uap->port.icount.overrun++;
+
+ ch &= uap->port.read_status_mask;
+
+ if (ch & UART011_DR_BE)
+ flag = TTY_BREAK;
+ else if (ch & UART011_DR_PE)
+ flag = TTY_PARITY;
+ else if (ch & UART011_DR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&uap->port, ch & 255))
+ goto ignore_char;
+
+ uart_insert_char(&uap->port, ch, UART011_DR_OE, ch,
flag);
+
+ignore_char:
+ status = readl(uap->port.membase + UART01x_FR);
+ }
+ spin_unlock(&uap->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&uap->port.lock);
+}
+
+static void pl011_tx_chars(struct uart_amba_port *uap)
+{
+ struct circ_buf *xmit = &uap->port.state->xmit;
+ int count;
+
+ if (uap->port.x_char) {
+ writel(uap->port.x_char, uap->port.membase +
UART01x_DR);
+ uap->port.icount.tx++;
+ uap->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
+ pl011_stop_tx(&uap->port);
+ return;
+ }
+
+ count = uap->port.fifosize >> 1;
+ do {
+ writel(xmit->buf[xmit->tail], uap->port.membase +
UART01x_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uap->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uap->port);
+
+ if (uart_circ_empty(xmit))
+ pl011_stop_tx(&uap->port);
+}
+
+static void pl011_modem_status(struct uart_amba_port *uap)
+{
+ unsigned int status, delta;
+
+ status = readl(uap->port.membase + UART01x_FR) &
UART01x_FR_MODEM_ANY;
+
+ delta = status ^ uap->old_status;
+ uap->old_status = status;
+
+ if (!delta)
+ return;
+
+ if (delta & UART01x_FR_DCD)
+ uart_handle_dcd_change(&uap->port, status &
UART01x_FR_DCD);
+
+ if (delta & UART01x_FR_DSR)
+ uap->port.icount.dsr++;
+
+ if (delta & UART01x_FR_CTS)
+ uart_handle_cts_change(&uap->port, status &
UART01x_FR_CTS);
+
+ wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
+}
+
+static irqreturn_t pl011_int(int irq, void *dev_id)
+{
+ struct uart_amba_port *uap = dev_id;
+ unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+ int handled = 0;
+
+ spin_lock(&uap->port.lock);
+
+ status = readl(uap->port.membase + UART011_MIS);
+ if (status) {
+ do {
+ writel(status & ~(UART011_TXIS|UART011_RTIS|
+ UART011_RXIS),
+ uap->port.membase + UART011_ICR);
+
+ if (status & (UART011_RTIS|UART011_RXIS))
+ pl011_rx_chars(uap);
+ if (status & (UART011_DSRMIS|UART011_DCDMIS|
+ UART011_CTSMIS|UART011_RIMIS))
+ pl011_modem_status(uap);
+ if (status & UART011_TXIS)
+ pl011_tx_chars(uap);
+
+ if (pass_counter-- == 0)
+ break;
+
+ status = readl(uap->port.membase + UART011_MIS);
+ } while (status != 0);
+ handled = 1;
+ }
+
+ spin_unlock(&uap->port.lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int pl011_tx_empty(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int status = readl(uap->port.membase + UART01x_FR);
+ return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 :
TIOCSER_TEMT;
+}
+
+static unsigned int pl011_get_mctrl(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int result = 0;
+ unsigned int status = readl(uap->port.membase + UART01x_FR);
+
+#define TIOCMBIT(uartbit, tiocmbit) \
+ { \
+ if (status & uartbit) \
+ result |= tiocmbit; \
+ }
+
+ TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR)
+ TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR)
+ TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS)
+ TIOCMBIT(UART011_FR_RI, TIOCM_RNG)
+#undef TIOCMBIT
+ return result;
+}
+
+static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+ cr = readl(uap->port.membase + UART011_CR);
+
+#define TIOCMBIT(tiocmbit, uartbit) \
+ do { \
+ if (mctrl & tiocmbit) \
+ cr |= uartbit; \
+ else \
+ cr &= ~uartbit; \
+ } while (0)
+
+ TIOCMBIT(TIOCM_RTS, UART011_CR_RTS);
+ TIOCMBIT(TIOCM_DTR, UART011_CR_DTR);
+ TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1);
+ TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
+ TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
+#undef TIOCMBIT
+
+ writel(cr, uap->port.membase + UART011_CR);
+}
+
+static void pl011_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned long flags;
+ unsigned int lcr_h;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ lcr_h = readl(uap->port.membase + UART011_LCRH);
+ if (break_state == -1)
+ lcr_h |= UART01x_LCRH_BRK;
+ else
+ lcr_h &= ~UART01x_LCRH_BRK;
+ writel(lcr_h, uap->port.membase + UART011_LCRH);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int pl011_get_poll_char(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int status;
+
+ do {
+ status = readl(uap->port.membase + UART01x_FR);
+ } while (status & UART01x_FR_RXFE);
+
+ return readl(uap->port.membase + UART01x_DR);
+}
+
+static void pl011_put_poll_char(struct uart_port *port,
+ unsigned char ch)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ while (readl(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ barrier();
+
+ writel(ch, uap->port.membase + UART01x_DR);
+}
+
+#endif /** CONFIG_CONSOLE_POLL */
+
+static int pl011_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+ int retval;
+
+ uap->port.uartclk = UARTCLK;
+ /**
+ * Allocate the IRQ
+ */
+ retval = request_irq(uap->port.irq, pl011_int,
+ IRQF_DISABLED | IRQF_SHARED, "uart-pl011", uap);
+ if (retval)
+ goto out;
+
+ writel(uap->ifls, uap->port.membase + UART011_IFLS);
+
+ /**
+ * Provoke TX FIFO interrupt into asserting.
+ */
+ cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
+ writel(cr, uap->port.membase + UART011_CR);
+ writel(0, uap->port.membase + UART011_FBRD);
+ writel(1, uap->port.membase + UART011_IBRD);
+ writel(0, uap->port.membase + UART011_LCRH);
+ writel(0, uap->port.membase + UART01x_DR);
+ while (readl(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+ barrier();
+
+ cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+ writel(cr, uap->port.membase + UART011_CR);
+
+ /**
+ * initialise the old status of the modem signals
+ */
+ uap->old_status =
+ readl(uap->port.membase + UART01x_FR) &
UART01x_FR_MODEM_ANY;
+
+ /**
+ * Finally, enable interrupts
+ */
+ spin_lock_irq(&uap->port.lock);
+ uap->im = UART011_RXIM | UART011_RTIM;
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+ spin_unlock_irq(&uap->port.lock);
+
+ return 0;
+
+ out:
+ return retval;
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned long val;
+
+ /**
+ * disable all interrupts
+ */
+ spin_lock_irq(&uap->port.lock);
+ uap->im = 0;
+ writel(uap->im, uap->port.membase + UART011_IMSC);
+ writel(0xffff, uap->port.membase + UART011_ICR);
+ spin_unlock_irq(&uap->port.lock);
+
+ /**
+ * Free the interrupt
+ */
+ free_irq(uap->port.irq, uap);
+
+ /**
+ * disable the port
+ */
+ writel(UART01x_CR_UARTEN |
+ UART011_CR_TXE, uap->port.membase + UART011_CR);
+
+ /**
+ * disable break condition and fifos
+ */
+ val = readl(uap->port.membase + UART011_LCRH);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writel(val, uap->port.membase + UART011_LCRH);
+}
+
+static void
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int lcr_h, old_cr;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /**
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0,
port->uartclk/16);
+ quot = port->uartclk * 4 / baud;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr_h = UART01x_LCRH_WLEN_5;
+ break;
+ case CS6:
+ lcr_h = UART01x_LCRH_WLEN_6;
+ break;
+ case CS7:
+ lcr_h = UART01x_LCRH_WLEN_7;
+ break;
+ default:
+ lcr_h = UART01x_LCRH_WLEN_8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ lcr_h |= UART01x_LCRH_STP2;
+ if (termios->c_cflag & PARENB) {
+ lcr_h |= UART01x_LCRH_PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcr_h |= UART01x_LCRH_EPS;
+ }
+ /** Enable hardware flow control*/
+ if (termios->c_cflag & CRTSCTS) {
+ if (*(int *)(port->private_data) == PL011_HWFC) {
+ lcr_h |= UART011_CR_CTSEN;
+ lcr_h |= UART011_CR_RTSEN;
+ }
+ }
+ if (port->fifosize > 1)
+ lcr_h |= UART01x_LCRH_FEN;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /**
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART011_DR_OE | 255;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART011_DR_BE;
+
+ /**
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_FE |
UART011_DR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART011_DR_BE;
+ /**
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_OE;
+ }
+
+ /**
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_DR_RX;
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ pl011_enable_ms(port);
+
+ /** first, disable everything */
+ old_cr = readl(port->membase + UART011_CR);
+ writel(0, port->membase + UART011_CR);
+
+ /** Set baud rate */
+ writel(quot & 0x3f, port->membase + UART011_FBRD);
+ writel(quot >> 6, port->membase + UART011_IBRD);
+
+ /**
+ * ----------v----------v----------v----------v-----
+ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * ----------^----------^----------^----------^-----
+ */
+ writel(lcr_h, port->membase + UART011_LCRH);
+ writel(lcr_h, port->membase + 0x1c);
+ writel(old_cr, port->membase + UART011_CR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pl011_type(struct uart_port *port)
+{
+ return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
+}
+
+/**
+ * Release the memory region(s) being used by 'port'
+ */
+static void pl011_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, SZ_4K);
+}
+
+/**
+ * Request the memory region(s) being used by 'port'
+ */
+static int pl011_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
+ != NULL ? 0 : -EBUSY;
+}
+
+/**
+ * Configure/autoconfigure the port.
+ */
+static void pl011_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AMBA;
+ pl011_request_port(port);
+ }
+}
+
+/**
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int pl011_verify_port(struct uart_port *port, struct
serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= nr_irqs)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops pci_pl011_pops = {
+ .tx_empty = pl011_tx_empty,
+ .set_mctrl = pl011_set_mctrl,
+ .get_mctrl = pl011_get_mctrl,
+ .stop_tx = pl011_stop_tx,
+ .start_tx = pl011_start_tx,
+ .stop_rx = pl011_stop_rx,
+ .enable_ms = pl011_enable_ms,
+ .break_ctl = pl011_break_ctl,
+ .startup = pl011_startup,
+ .shutdown = pl011_shutdown,
+ .set_termios = pl011_set_termios,
+ .type = pl011_type,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
+#endif
+};
+
+static struct uart_amba_port *amba_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_PCI_PL011_CONSOLE
+
+static void pl011_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ while (readl(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ barrier();
+ writel(ch, uap->port.membase + UART01x_DR);
+}
+
+static void
+pl011_console_write(struct console *co, const char *s, unsigned int
count)
+{
+ struct uart_amba_port *uap = amba_ports[co->index];
+ unsigned int status, old_cr, new_cr;
+ /**
+ * First save the CR then disable the interrupts
+ */
+ old_cr = readl(uap->port.membase + UART011_CR);
+ new_cr = old_cr & ~UART011_CR_CTSEN;
+ new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+ writel(new_cr, uap->port.membase + UART011_CR);
+
+ uart_console_write(&uap->port, s, count, pl011_console_putchar);
+
+ /**
+ * Finally, wait for transmitter to become empty
+ * and restore the TCR
+ */
+ do {
+ status = readl(uap->port.membase + UART01x_FR);
+ } while (status & UART01x_FR_BUSY);
+ writel(old_cr, uap->port.membase + UART011_CR);
+}
+
+static void __init
+pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
+{
+ if (readl(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
+ unsigned int lcr_h, iadapter, fadapter;
+
+ lcr_h = readl(uap->port.membase + UART011_LCRH);
+
+ *parity = 'n';
+ if (lcr_h & UART01x_LCRH_PEN) {
+ if (lcr_h & UART01x_LCRH_EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ iadapter = readl(uap->port.membase + UART011_IBRD);
+ fadapter = readl(uap->port.membase + UART011_FBRD);
+
+ *baud = uap->port.uartclk * 4 / (64 * iadapter +
fadapter);
+ }
+}
+
+static int __init pl011_console_setup(struct console *co, char
*options)
+{
+ struct uart_amba_port *uap;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /**
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ uap = amba_ports[co->index];
+ if (!uap)
+ return -ENODEV;
+ uap->port.uartclk = UARTCLK;
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits,
&flow);
+ else
+ pl011_console_get_options(uap, &baud, &parity, &bits);
+
+ return uart_set_options(&uap->port, co, baud, parity, bits,
flow);
+}
+
+static struct uart_driver pci_pl011_uart_driver;
+static struct console amba_console = {
+ .name = "ttyAM",
+ .write = pl011_console_write,
+ .device = uart_console_device,
+ .setup = pl011_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &pci_pl011_uart_driver,
+};
+
+#define AMBA_CONSOLE (&amba_console)
+#else
+#define AMBA_CONSOLE NULL
+#endif
+
+
+static struct uart_driver pci_pl011_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = PCI_PL011_DRIVER_NAME,
+ .dev_name = "ttyAM",
+ .major = PCI_PL011_MAJOR,
+ .minor = PCI_PL011_MINOR_START,
+ .nr = UART_NR,
+ .cons = AMBA_CONSOLE,
+};
+
+static int __devinit
+pci_pl011_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int index, rc = 0;
+ struct pci_pl011_adapter *adapter, *tmp_adapter;
+ struct uart_amba_port *uap;
+ struct list_head *tmp;
+ int pci_pl011_adapter_count = 0;
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "Device enable FAILED\n");
+ goto out;
+ }
+
+ rc = pci_request_regions(pdev, "pci_pl011");
+ if (rc) {
+ dev_err(&pdev->dev, "pci_request_region FAILED\n");
+ goto out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ adapter = kzalloc(sizeof(struct pci_pl011_adapter), GFP_KERNEL);
+ if (!adapter) {
+ dev_err(&pdev->dev,
+ "memory allocation for adapter structure
failed\n");
+ rc = -ENOMEM;
+ goto out_release_regions;
+ }
+ list_for_each(tmp, &pci_pl011_adapter_head) {
+ tmp_adapter = list_entry(tmp, struct pci_pl011_adapter,
+ pci_pl011_adapter_entry);
+ if (tmp_adapter->index != pci_pl011_adapter_count)
+ break;
+ pci_pl011_adapter_count++;
+ }
+ adapter->index = pci_pl011_adapter_count;
+ list_add_tail(&adapter->pci_pl011_adapter_entry, tmp);
+
+ adapter->pci_dev = pdev;
+ if (pdev->device == PCI_DEVICE_ID_STMICRO_UART_HWFC)
+ adapter->type = PL011_HWFC;
+ else
+ adapter->type = PL011_NO_HWFC;
+ adapter->numb_ports = 1;
+
+ spin_lock_init(&adapter->intr_lock);
+
+ /** store which revision we have */
+ adapter->rev = pdev->revision;
+
+ adapter->irq = pdev->irq;
+
+ /** get the PCI Base Address Registers */
+ adapter->membase = pci_resource_start(pdev, 0);
+ adapter->membase_end = pci_resource_end(pdev, 0);
+
+ if (adapter->membase & 1)
+ adapter->membase &= ~3;
+ else
+ adapter->membase &= ~15;
+
+
+ adapter->re_map_membase =
+ ioremap(adapter->membase, pci_resource_len(pdev, 0));
+ if (!adapter->re_map_membase) {
+ dev_err(&pdev->dev,
+ "Device has no PCI Memory resources, "
+ "failing adapter.\n");
+ rc = -ENOMEM;
+ goto out_kfree_adapter;
+ }
+
+ for (index = 0; index < adapter->numb_ports; index++) {
+ uap = &adapter->port_info[index];
+ uap->port.uartclk = UARTCLK;
+ if (IS_ERR(uap->clk)) {
+ rc = PTR_ERR(uap->clk);
+ goto out_iounmap;
+ }
+
+ uap->port.private_data = &adapter->type;
+ uap->port.mapbase = adapter->membase;
+ uap->port.membase = adapter->re_map_membase;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = adapter->irq;
+ uap->port.fifosize = vendor_st.fifosize;
+ uap->port.ops = &pci_pl011_pops;
+ uap->port.flags = UPF_BOOT_AUTOCONF;
+ uap->port.line = index + adapter->index *
adapter->numb_ports;
+ if (uart_add_one_port(&pci_pl011_uart_driver,
&uap->port))
+ printk(KERN_INFO "Added uart port Failed\n");
+ else
+ printk(KERN_INFO "Added uart port \n");
+ amba_ports[uap->port.line] = uap;
+ }
+
+ /** Log the information about the adapter */
+ dev_info(&pdev->dev, "adapter %d: (rev %d), irq %d\n",
+ pci_pl011_adapter_count, adapter->rev,
adapter->irq);
+
+ pci_set_drvdata(pdev, adapter);
+
+ return 0;
+
+ out_iounmap:
+ iounmap(adapter->re_map_membase);
+ out_kfree_adapter:
+ kfree(adapter);
+ out_release_regions:
+ pci_release_regions(pdev);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return rc;
+}
+
+static void __devexit pci_pl011_remove(struct pci_dev *pdev)
+{
+ struct pci_pl011_adapter *adapter = pci_get_drvdata(pdev);
+ int i = 0;
+
+
+ for (i = 0; i < adapter->numb_ports; i++)
+ uart_remove_one_port(&pci_pl011_uart_driver,
+ &adapter->port_info[i].port);
+
+ iounmap(adapter->re_map_membase);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ list_del(&adapter->pci_pl011_adapter_entry);
+ kfree(adapter);
+}
+
+static struct pci_device_id pci_pl011_pci_tbl[] = {
+ {
+ .vendor = PCI_VENDOR_ID_STMICRO,
+ .device = PCI_DEVICE_ID_STMICRO_UART_HWFC,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = 0,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_STMICRO,
+ .device = PCI_DEVICE_ID_STMICRO_UART_NO_HWFC,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = 0,
+ },
+ { },
+};
+
+static struct pci_driver pci_pl011_driver = {
+ .name = "pci_pl011",
+ .id_table = pci_pl011_pci_tbl,
+ .probe = pci_pl011_probe,
+ .remove = __devexit_p(pci_pl011_remove),
+};
+
+static int __init pci_pl011_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO "Serial: PCI PL011 UART driver\n");
+
+ rc = uart_register_driver(&pci_pl011_uart_driver);
+ if (!rc) {
+ rc = pci_register_driver(&pci_pl011_driver);
+ if (rc)
+ uart_unregister_driver(&pci_pl011_uart_driver);
+ }
+ return rc;
+}
+
+static void __exit pci_pl011_exit(void)
+{
+ pci_unregister_driver(&pci_pl011_driver);
+ uart_unregister_driver(&pci_pl011_uart_driver);
+}
+
+module_init(pci_pl011_init);
+module_exit(pci_pl011_exit);
+
+MODULE_DESCRIPTION("Driver for the pl011 based on PCI");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("pl011-pci");
+MODULE_VERSION(DRV_VERSION);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists