[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20091118141020.2798.16002.stgit@localhost.localdomain>
Date: Wed, 18 Nov 2009 14:10:21 +0000
From: Alan Cox <alan@...ux.intel.com>
To: greg@...ah.com, linux-kernel@...r.kernel.org
Subject: [PATCH 3/7] riscom8: switch to the tty_port_open API
Signed-off-by: Alan Cox <alan@...ux.intel.com>
---
drivers/char/riscom8.c | 89 ++++++++++++++++++++++--------------------------
1 files changed, 41 insertions(+), 48 deletions(-)
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 3cfa22d..d362272 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -793,26 +793,21 @@ static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
}
/* Must be called with interrupts enabled */
-static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
- struct riscom_port *port)
+static int rc_activate_port(struct tty_port *port, struct tty_struct *tty)
{
+ struct riscom_port *rp = container_of(port, struct riscom_port, port);
+ struct riscom_board *bp = port_Board(rp);
unsigned long flags;
- if (port->port.flags & ASYNC_INITIALIZED)
- return 0;
-
- if (tty_port_alloc_xmit_buf(&port->port) < 0)
+ if (tty_port_alloc_xmit_buf(port) < 0)
return -ENOMEM;
spin_lock_irqsave(&riscom_lock, flags);
clear_bit(TTY_IO_ERROR, &tty->flags);
- if (port->port.count == 1)
- bp->count++;
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- rc_change_speed(tty, bp, port);
- port->port.flags |= ASYNC_INITIALIZED;
-
+ bp->count++;
+ rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0;
+ rc_change_speed(tty, bp, rp);
spin_unlock_irqrestore(&riscom_lock, flags);
return 0;
}
@@ -821,9 +816,6 @@ static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
static void rc_shutdown_port(struct tty_struct *tty,
struct riscom_board *bp, struct riscom_port *port)
{
- if (!(port->port.flags & ASYNC_INITIALIZED))
- return;
-
#ifdef RC_REPORT_OVERRUN
printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
board_No(bp), port_No(port), port->overrun);
@@ -840,11 +832,6 @@ static void rc_shutdown_port(struct tty_struct *tty,
}
#endif
tty_port_free_xmit_buf(&port->port);
- if (C_HUPCL(tty)) {
- /* Drop DTR */
- bp->DTR |= (1u << port_No(port));
- rc_out(bp, RC_DTR, bp->DTR);
- }
/* Select port */
rc_out(bp, CD180_CAR, port_No(port));
@@ -856,7 +843,6 @@ static void rc_shutdown_port(struct tty_struct *tty,
rc_out(bp, CD180_IER, port->IER);
set_bit(TTY_IO_ERROR, &tty->flags);
- port->port.flags &= ~ASYNC_INITIALIZED;
if (--bp->count < 0) {
printk(KERN_INFO "rc%d: rc_shutdown_port: "
@@ -889,6 +875,20 @@ static int carrier_raised(struct tty_port *port)
return CD;
}
+static void dtr_rts(struct tty_port *port, int onoff)
+{
+ struct riscom_port *p = container_of(port, struct riscom_port, port);
+ struct riscom_board *bp = port_Board(p);
+ unsigned long flags;
+
+ spin_lock_irqsave(&riscom_lock, flags);
+ bp->DTR &= ~(1u << port_No(p));
+ if (onoff == 0)
+ bp->DTR |= (1u << port_No(p));
+ rc_out(bp, RC_DTR, bp->DTR);
+ spin_unlock_irqrestore(&riscom_lock, flags);
+}
+
static int rc_open(struct tty_struct *tty, struct file *filp)
{
int board;
@@ -909,14 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
if (error)
return error;
- port->port.count++;
- tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
-
- error = rc_setup_port(tty, bp, port);
- if (error == 0)
- error = tty_port_block_til_ready(&port->port, tty, filp);
- return error;
+ return tty_port_open(&port->port, tty, filp);
}
static void rc_flush_buffer(struct tty_struct *tty)
@@ -950,24 +943,23 @@ static void rc_close_port(struct tty_port *port)
spin_lock_irqsave(&riscom_lock, flags);
rp->IER &= ~IER_RXD;
- if (port->flags & ASYNC_INITIALIZED) {
- rp->IER &= ~IER_TXRDY;
- rp->IER |= IER_TXEMPTY;
- rc_out(bp, CD180_CAR, port_No(rp));
- rc_out(bp, CD180_IER, rp->IER);
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- timeout = jiffies + HZ;
- while (rp->IER & IER_TXEMPTY) {
- spin_unlock_irqrestore(&riscom_lock, flags);
- msleep_interruptible(jiffies_to_msecs(rp->timeout));
- spin_lock_irqsave(&riscom_lock, flags);
- if (time_after(jiffies, timeout))
- break;
- }
+
+ rp->IER &= ~IER_TXRDY;
+ rp->IER |= IER_TXEMPTY;
+ rc_out(bp, CD180_CAR, port_No(rp));
+ rc_out(bp, CD180_IER, rp->IER);
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ timeout = jiffies + HZ;
+ while (rp->IER & IER_TXEMPTY) {
+ spin_unlock_irqrestore(&riscom_lock, flags);
+ msleep_interruptible(jiffies_to_msecs(rp->timeout));
+ spin_lock_irqsave(&riscom_lock, flags);
+ if (time_after(jiffies, timeout))
+ break;
}
rc_shutdown_port(port->tty, bp, rp);
spin_unlock_irqrestore(&riscom_lock, flags);
@@ -1354,7 +1346,6 @@ static void rc_hangup(struct tty_struct *tty)
if (rc_paranoia_check(port, tty->name, "rc_hangup"))
return;
- rc_shutdown_port(tty, port_Board(port), port);
tty_port_hangup(&port->port);
}
@@ -1401,7 +1392,9 @@ static const struct tty_operations riscom_ops = {
static const struct tty_port_operations riscom_port_ops = {
.carrier_raised = carrier_raised,
+ .dtr_rts = dtr_rts,
.shutdown = rc_close_port,
+ .activate = rc_activate_port,
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists