linux-kernel - [PATCH v3 0/5] lis3: Feature updates

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1258622842-23129-1-git-send-email-samu.p.onkalo@nokia.com>
Date:	Thu, 19 Nov 2009 11:27:17 +0200
From:	Samu Onkalo <samu.p.onkalo@...ia.com>
To:	eric.piel@...mplin-utc.net
Cc:	linux-kernel@...r.kernel.org, lm-sensors@...sensors.org,
	Samu Onkalo <samu.p.onkalo@...ia.com>
Subject: [PATCH v3 0/5] lis3: Feature updates

This patch set is made to top of 7 previously accepted lis3 related patches in
mm-tree:
- I2C bus support for lis3lv02d and variant accelerometer chips...
- Add the possibility to remap axes via platform data...
- Send input_sync after each measurement round...
- polled input device itself was not free'd....
- riginally the driver was only targeted to 12bits sensors...
- Most of the documentation and comments were written when the driver ..
- Lis3 accelerometer sensors have quite long power on delay ..

Tested with 2.6.32-RC7 which was patched with above 7 lis3 related patches.
Tested only with 8 bit lis3 device since I don't have possibility to test
other chips.

0001:
Implement selftest feature for HW diagnostic purposes. This feature can be used
to detect if the sensor is electrically or mechanically damaged.

0002:
Calibration functionality is removed from the driver. Chip is allready
calibrated by the manufacturer. SW calibration doesn't improve the situation.

0003:
Added possibility to set chip sampling rate. Position entry in sysfs
allows reading at sampling rate.

0004:
Scale output values to mg (1/1000 of earth gravity).
Behaviour of the joystick interface is not changed. All other interfaces
will have different scale after this patch. See further information from
patch itself.

0005:
Update documentation to cover changes which were made by these patches.

Samu Onkalo (5):
  lis3: Selftest support
  LIS3LV02D: Remove calibaration functionality
  lis3: Sysfs entry for setting chip measurement rate
  lis3: Scale output values to mg
  LIS3: Update documentation to match latest changes

 Documentation/hwmon/lis3lv02d |   31 ++++++--
 drivers/hwmon/lis3lv02d.c     |  180 ++++++++++++++++++++++++++++++++---------
 drivers/hwmon/lis3lv02d.h     |   25 +++++-
 include/linux/lis3lv02d.h     |    3 +
 4 files changed, 190 insertions(+), 49 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/