lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B06EA3B.10500@cam.ac.uk>
Date:	Fri, 20 Nov 2009 19:12:59 +0000
From:	Jonathan Cameron <jic23@....ac.uk>
To:	LKML <linux-kernel@...r.kernel.org>,
	Amit Kucheria <amit.kucheria@...durent.com>,
	Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH] Staging: IIO: Add tsl2560-2 support to tsl2563 driver + drop
 tsl2561, driver.

These parts (tsl2560-tsl2563) are identical in interface.
The tsl2563 driver is more advanced so makes sense to drop
the tsl2561 driver.

Signed-off-by: Jonathan Cameron <jic23@....ac.uk>
---
Greg, I've done the changes and driver removal as a single patch.
Can separate into two if you would prefer?

Amit, as promised I have tested against the tsl2561 on an imote2
sensor board (for which the original driver was written). All seems
to work as intended.  Only changes are addition of devices to the
device table and Kconfig comment changes to reflect new support.
Hope you don't mind, but I dropped the N900 reference.  These things
are pretty common (including the new parts) and we don't really
want to encourage people to start listing where they found. I
haven't done any of the other changes I suggested, but can do
those as a follow up patch if you don't mind?

There are a few more similar chips with slightly different conversion
functions.

Thanks,

Jonathan

 drivers/staging/iio/light/Kconfig   |   15 +--
 drivers/staging/iio/light/Makefile  |    1 -
 drivers/staging/iio/light/tsl2561.c |  272 -----------------------------------
 drivers/staging/iio/light/tsl2563.c |   11 +-
 4 files changed, 9 insertions(+), 290 deletions(-)

diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index cf0d0d6..cf1d946 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -3,21 +3,12 @@
 #
 comment "Light sensors"
 
-config TSL2561
-       tristate "TAOS TSL2561 light-to-digital convertor"
-       depends on I2C
-       help
-	Say yes bere to build support for the TAOS light to digital
-	convertor.  This chip has two light sensors. One is broadband
-	including infrared whilst the other measures only infrared.
-	Provides direct access via sysfs.
-
 config SENSORS_TSL2563
-	tristate "TAOS TSL2563 ambient light sensor"
+	tristate "TAOS TSL256[0-3] ambient light sensors"
 	depends on I2C
 	help
-	 If you say yes here you get support for the Taos TSL2563
-	 ambient light sensor (found in N900).
+	 If you say yes here you get support for the Taos TSL2560,
+	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
 
 	 This driver can also be built as a module.  If so, the module
 	 will be called tsl2563.
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 30dbfb1..30f3300 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -2,5 +2,4 @@
 # Makefile for industrial I/O Light sensors
 #
 
-obj-$(CONFIG_TSL2561)   += tsl2561.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/staging/iio/light/tsl2561.c b/drivers/staging/iio/light/tsl2561.c
deleted file mode 100644
index fc2107f..0000000
--- a/drivers/staging/iio/light/tsl2561.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- *  tsl2561.c - Linux kernel modules for light to digital convertor
- *
- *  Copyright (C) 2008-2009 Jonathan Cameron <jic23@....ac.uk>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Some portions based upon the tsl2550 driver.
- *
- *  This driver could probably be adapted easily to talk to the tsl2560 (smbus)
- *
- *  Needs some work to support the events this can generate.
- *  Todo: Implement interrupt handling.  Currently a hardware bug means
- *  this isn't available on my test board.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include "../iio.h"
-#include "../sysfs.h"
-#include "light.h"
-
-#define TSL2561_CONTROL_REGISTER 0x00
-#define TSL2561_TIMING_REGISTER 0x01
-#define TSL2561_THRESHLOW_LOW_REGISTER 0x02
-#define TSL2561_THRESHLOW_HIGH_REGISTER 0x03
-#define TSL2561_THRESHHIGH_LOW_REGISTER 0x04
-#define TSL2561_THRESHHIGH_HIGH_REGISTER 0x05
-#define TSL2561_INT_CONTROL_REGISTER 0x06
-
-#define TSL2561_INT_REG_INT_OFF 0x00
-#define TSL2561_INT_REG_INT_LEVEL 0x08
-#define TSL2561_INT_REG_INT_SMBUS 0x10
-#define TSL2561_INT_REG_INT_TEST 0x18
-
-#define TSL2561_ID_REGISTER 0x0A
-
-#define TSL2561_DATA_0_LOW 0x0C
-#define TSL2561_DATA_1_LOW 0x0E
-
-/* Control Register Values */
-#define TSL2561_CONT_REG_PWR_ON 0x03
-#define TSL2561_CONT_REG_PWR_OFF 0x00
-
-/**
- * struct tsl2561_state - device specific state
- * @indio_dev:		the industrialio I/O info structure
- * @client:		i2c client
- * @command_buf:	single command buffer used for all operations
- * @command_buf_lock:	ensure unique access to command_buf
- */
-struct tsl2561_state {
-	struct iio_dev		*indio_dev;
-	struct i2c_client	*client;
-	struct tsl2561_command	*command_buf;
-	struct mutex		command_buf_lock;
-};
-
-/**
- * struct tsl2561_command - command byte for smbus
- * @address:	register address
- * @block:	is this a block r/w
- * @word:	is this a word r/w
- * @clear:	set to 1 to clear pending interrupt
- * @cmd:	select the command register - always 1.
- */
-struct tsl2561_command {
-	unsigned int address:4;
-	unsigned int block:1;
-	unsigned int word:1;
-	unsigned int clear:1;
-	unsigned int cmd:1;
-};
-
-static inline void tsl2561_init_command_buf(struct tsl2561_command *buf)
-{
-	buf->address = 0;
-	buf->block = 0;
-	buf->word = 0;
-	buf->clear = 0;
-	buf->cmd = 1;
-}
-
-static ssize_t tsl2561_read_val(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	int ret = 0, data;
-	ssize_t len = 0;
-	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct tsl2561_state *st = indio_dev->dev_data;
-
-	mutex_lock(&st->command_buf_lock);
-	st->command_buf->cmd = 1;
-	st->command_buf->word = 1;
-	st->command_buf->address = this_attr->address;
-
-	data = i2c_smbus_read_word_data(st->client, *(char *)(st->command_buf));
-	if (data < 0) {
-		ret = data;
-		goto error_ret;
-	}
-	len = sprintf(buf, "%u\n", data);
-
-error_ret:
-	mutex_unlock(&st->command_buf_lock);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEV_ATTR_LIGHT_INFRARED(0, tsl2561_read_val, TSL2561_DATA_0_LOW);
-static IIO_DEV_ATTR_LIGHT_BROAD(0, tsl2561_read_val, TSL2561_DATA_1_LOW);
-
-static struct attribute *tsl2561_attributes[] = {
-	&iio_dev_attr_light_infrared0.dev_attr.attr,
-	&iio_dev_attr_light_broadspectrum0.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group tsl2561_attribute_group = {
-	.attrs = tsl2561_attributes,
-};
-
-static int tsl2561_initialize(struct tsl2561_state *st)
-{
-	int err;
-
-	mutex_lock(&st->command_buf_lock);
-	st->command_buf->word = 0;
-	st->command_buf->block = 0;
-	st->command_buf->address = TSL2561_CONTROL_REGISTER;
-	err = i2c_smbus_write_byte_data(st->client, *(char *)(st->command_buf),
-					TSL2561_CONT_REG_PWR_ON);
-	if (err)
-		goto error_ret;
-
-	st->command_buf->address = TSL2561_INT_CONTROL_REGISTER;
-	err = i2c_smbus_write_byte_data(st->client, *(char *)(st->command_buf),
-					TSL2561_INT_REG_INT_TEST);
-
-error_ret:
-	mutex_unlock(&st->command_buf_lock);
-
-	return err;
-}
-
-static int tsl2561_powerdown(struct i2c_client *client)
-{
-	int err;
-	struct tsl2561_command Command = {
-		.cmd =  1,
-		.clear = 0,
-		.word = 0,
-		.block = 0,
-		.address = TSL2561_CONTROL_REGISTER,
-	};
-
-	err = i2c_smbus_write_byte_data(client, *(char *)(&Command),
-					TSL2561_CONT_REG_PWR_OFF);
-	return (err < 0) ? err : 0;
-}
-static int __devinit tsl2561_probe(struct i2c_client *client,
-				   const struct i2c_device_id *id)
-{
-	int ret = 0, regdone = 0;
-	struct tsl2561_state *st = kzalloc(sizeof(*st), GFP_KERNEL);
-
-	if (st == NULL) {
-		ret = -ENOMEM;
-		goto error_ret;
-	}
-	i2c_set_clientdata(client, st);
-	st->client = client;
-	mutex_init(&st->command_buf_lock);
-
-	st->command_buf = kmalloc(sizeof(*st->command_buf), GFP_KERNEL);
-	if (st->command_buf == NULL) {
-		ret = -ENOMEM;
-		goto error_free_state;
-	}
-	tsl2561_init_command_buf(st->command_buf);
-
-	st->indio_dev = iio_allocate_device();
-	if (st->indio_dev == NULL) {
-		ret = -ENOMEM;
-		goto error_free_command_buf;
-	}
-	st->indio_dev->attrs = &tsl2561_attribute_group;
-	st->indio_dev->dev.parent = &client->dev;
-	st->indio_dev->dev_data = (void *)(st);
-	st->indio_dev->driver_module = THIS_MODULE;
-	st->indio_dev->modes = INDIO_DIRECT_MODE;
-	ret = iio_device_register(st->indio_dev);
-	if (ret)
-		goto error_free_iiodev;
-	regdone = 1;
-	/* Intialize the chip */
-	ret = tsl2561_initialize(st);
-	if (ret)
-		goto error_unregister_iiodev;
-
-	return 0;
-error_unregister_iiodev:
-error_free_iiodev:
-	if (regdone)
-		iio_device_unregister(st->indio_dev);
-	else
-		iio_free_device(st->indio_dev);
-error_free_command_buf:
-	kfree(st->command_buf);
-error_free_state:
-	kfree(st);
-error_ret:
-	return ret;
-
-}
-
-static int __devexit tsl2561_remove(struct i2c_client *client)
-{
-	struct tsl2561_state *st =  i2c_get_clientdata(client);
-
-	iio_device_unregister(st->indio_dev);
-	kfree(st);
-
-	return tsl2561_powerdown(client);
-}
-
-static const struct i2c_device_id tsl2561_id[] = {
-	{ "tsl2561", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tsl2561_id);
-
-
-static struct i2c_driver tsl2561_driver = {
-	.driver = {
-		.name = "tsl2561",
-	},
-	.probe = tsl2561_probe,
-	.remove = __devexit_p(tsl2561_remove),
-	.id_table  = tsl2561_id,
-};
-
-static __init int tsl2561_init(void)
-{
-	return i2c_add_driver(&tsl2561_driver);
-}
-module_init(tsl2561_init);
-
-static __exit void tsl2561_exit(void)
-{
-	i2c_del_driver(&tsl2561_driver);
-}
-module_exit(tsl2561_exit);
-
-MODULE_AUTHOR("Jonathan Cameron <jic23@....ac.uk>");
-MODULE_DESCRIPTION("TSL2561 light sensor driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 3e812b2..78b9432 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -38,8 +38,6 @@
 #include "../iio.h"
 #include "tsl2563.h"
 
-#define DRIVER_NAME  "tsl2563"
-
 /* Use this many bits for fraction part. */
 #define ADC_FRAC_BITS		(14)
 
@@ -738,14 +736,17 @@ out:
 }
 
 static const struct i2c_device_id tsl2563_id[] = {
-	{ DRIVER_NAME, 0 },
-	{ },
+	{ "tsl2560", 0 },
+	{ "tsl2561", 1 },
+	{ "tsl2562", 2 },
+	{ "tsl2563", 3 },
+	{}
 };
 MODULE_DEVICE_TABLE(i2c, tsl2563_id);
 
 static struct i2c_driver tsl2563_i2c_driver = {
 	.driver = {
-		.name	 = DRIVER_NAME,
+		.name	 = "tsl2563",
 	},
 	.suspend	= tsl2563_suspend,
 	.resume		= tsl2563_resume,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ