| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4B0803B9.2070700@simon.arlott.org.uk>
Date: Sat, 21 Nov 2009 15:14:01 +0000
From: Simon Arlott <simon@...e.lp0.eu>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH 6/8] cxacru: add write-only sysfs attribute for modem configuration
The modem can be configured using CM_REQUEST_CARD_DATA_SET,
although CM_REQUEST_CARD_DATA_GET does not return any data.
Tested by setting the modulation (0x0a) option.
There is a list of parameters in the following archive,
but the meaning of many of them is not well documented:
http://sourceforge.net/project/shownotes.php?release_id=301825
This source also indicates that the highest parameter set
is 0x4a but this varies by model so an arbitrary limit of
0x7f has been used (the index is a 32-bit integer).
Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
---
Documentation/networking/cxacru.txt | 9 ++++
drivers/usb/atm/cxacru.c | 76 ++++++++++++++++++++++++++++++++++-
2 files changed, 84 insertions(+), 1 deletions(-)
diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt
index 3532cee..f4fbf4c 100644
--- a/Documentation/networking/cxacru.txt
+++ b/Documentation/networking/cxacru.txt
@@ -15,6 +15,15 @@ several sysfs attribute files for retrieving device statistics:
* adsl_headend_environment
Information about the remote headend.
+* adsl_config
+ Configuration writing interface.
+ Write parameters in hexadecimal format <index>=<value>,
+ separated by whitespace, e.g.:
+ "1=0 a=5"
+ Up to 7 parameters at a time will be sent and the modem will restart
+ the ADSL connection when any value is set. These are logged for future
+ reference.
+
* downstream_attenuation (dB)
* downstream_bits_per_frame
* downstream_rate (kbps)
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index c6ec10e..4168574 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -52,6 +52,7 @@ static const char cxacru_driver_name[] = "cxacru";
#define CXACRU_EP_DATA 0x02 /* Bulk in/out */
#define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */
+#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2)
/* Addresses */
#define PLLFCLK_ADDR 0x00350068
@@ -216,6 +217,10 @@ static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL)
static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \
cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name)
+#define CXACRU_SET_INIT(_name) \
+static DEVICE_ATTR(_name, S_IWUSR, \
+ NULL, cxacru_sysfs_store_##_name)
+
#define CXACRU_ATTR_INIT(_value, _type, _name) \
static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -232,10 +237,12 @@ CXACRU__ATTR_INIT(_name)
#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
@@ -437,6 +444,72 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
return ret;
}
+/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
+
+static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct cxacru_data *instance = to_usbatm_driver_data(
+ to_usb_interface(dev));
+ int len = strlen(buf);
+ int ret, pos, num;
+ __le32 data[CMD_PACKET_SIZE / 4];
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EACCES;
+
+ if (instance == NULL)
+ return -ENODEV;
+
+ pos = 0;
+ num = 0;
+ while (pos < len) {
+ int tmp;
+ u32 index;
+ u32 value;
+
+ ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
+ if (ret < 2)
+ return -EINVAL;
+ if (index < 0 || index > 0x7f)
+ return -EINVAL;
+ pos += tmp;
+
+ /* skip trailing newline */
+ if (buf[pos] == '\n' && pos == len-1)
+ pos++;
+
+ data[num * 2 + 1] = cpu_to_le32(index);
+ data[num * 2 + 2] = cpu_to_le32(value);
+ num++;
+
+ /* send config values when data buffer is full
+ * or no more data
+ */
+ if (pos >= len || num >= CMD_MAX_CONFIG) {
+ char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
+
+ data[0] = cpu_to_le32(num);
+ ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
+ (u8 *) data, 4 + num * 8, NULL, 0);
+ if (ret < 0) {
+ atm_err(instance->usbatm,
+ "set card data returned %d\n", ret);
+ return -EIO;
+ }
+
+ for (tmp = 0; tmp < num; tmp++)
+ snprintf(log + tmp*12, 13, " %02x=%08x",
+ le32_to_cpu(data[tmp * 2 + 1]),
+ le32_to_cpu(data[tmp * 2 + 2]));
+ atm_info(instance->usbatm, "config%s\n", log);
+ num = 0;
+ }
+ }
+
+ return len;
+}
+
/*
* All device attributes are included in CXACRU_ALL_FILES
* so that the same list can be used multiple times:
@@ -472,7 +545,8 @@ CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \
CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \
CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \
CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \
-CXACRU_CMD_##_action( adsl_state);
+CXACRU_CMD_##_action( adsl_state); \
+CXACRU_SET_##_action( adsl_config);
CXACRU_ALL_FILES(INIT);
--
1.6.3.3
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists