[ 0.000000] Linux version 2.6.32-rc3-debug (sonne@no) (gcc version 4.4.2 (Debian 4.4.2-3) ) #24 SMP PREEMPT Sat Nov 21 09:23:52 CET 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae72b000 (usable) [ 0.000000] BIOS-e820: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ae92c000 - 00000000bf097000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf097000 - 00000000bf099000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf099000 - 00000000bf09b000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf09d000 - 00000000bfeb7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfec6000 - 00000000bfecd000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfed6000 - 00000000bfed7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved) [ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e7400000 - 00000000e7401000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 1, base: 0GB, range: 2GB, type WB [ 0.000000] reg 2, base: 2GB, range: 1GB, type WB [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] reg 4, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM coverred: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xae72b max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000ae72b000 (usable) [ 0.000000] modified: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS) [ 0.000000] modified: 00000000ae92c000 - 00000000bf097000 (ACPI data) [ 0.000000] modified: 00000000bf097000 - 00000000bf099000 (ACPI NVS) [ 0.000000] modified: 00000000bf099000 - 00000000bf09b000 (ACPI data) [ 0.000000] modified: 00000000bf09b000 - 00000000bf09d000 (ACPI NVS) [ 0.000000] modified: 00000000bf09d000 - 00000000bfeb7000 (ACPI data) [ 0.000000] modified: 00000000bfeb7000 - 00000000bfec6000 (ACPI NVS) [ 0.000000] modified: 00000000bfec6000 - 00000000bfecd000 (ACPI data) [ 0.000000] modified: 00000000bfecd000 - 00000000bfed6000 (ACPI NVS) [ 0.000000] modified: 00000000bfed6000 - 00000000bfed7000 (ACPI data) [ 0.000000] modified: 00000000bfed7000 - 00000000bfedf000 (ACPI NVS) [ 0.000000] modified: 00000000bfedf000 - 00000000bfef9000 (ACPI data) [ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved) [ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data) [ 0.000000] modified: 00000000e7400000 - 00000000e7401000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000ae72b000 [ 0.000000] 0000000000 - 00ae600000 page 2M [ 0.000000] 00ae600000 - 00ae72b000 page 4k [ 0.000000] kernel direct mapping tables up to ae72b000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 00000000bfeee1c0 0007C (v01 APPLE Apple00 000000AC 01000013) [ 0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE Apple00 000000AC Loki 0000005F) [ 0.000000] ACPI: DSDT 00000000bfec6000 06238 (v01 APPLE MacBookP 00050003 INTL 20061109) [ 0.000000] ACPI: FACS 00000000bfecd000 00040 [ 0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 00000000bfee1000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfee4000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bfee3000 0009F (v01 SataRe SataSec 00001000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000183acac] TEXT DATA BSS ==> [0001000000 - 000183acac] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [000183b000 - 000183b201] BRK ==> [000183b000 - 000183b201] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000ae72b [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 976581 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3835 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 696163 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000 [ 0.000000] PM: Registered nosave memory: 00000000ae92c000 - 00000000bf097000 [ 0.000000] PM: Registered nosave memory: 00000000bf097000 - 00000000bf099000 [ 0.000000] PM: Registered nosave memory: 00000000bf099000 - 00000000bf09b000 [ 0.000000] PM: Registered nosave memory: 00000000bf09b000 - 00000000bf09d000 [ 0.000000] PM: Registered nosave memory: 00000000bf09d000 - 00000000bfeb7000 [ 0.000000] PM: Registered nosave memory: 00000000bfeb7000 - 00000000bfec6000 [ 0.000000] PM: Registered nosave memory: 00000000bfec6000 - 00000000bfecd000 [ 0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfed6000 [ 0.000000] PM: Registered nosave memory: 00000000bfed6000 - 00000000bfed7000 [ 0.000000] PM: Registered nosave memory: 00000000bfed7000 - 00000000bfedf000 [ 0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfef9000 [ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000 [ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e7400000 [ 0.000000] PM: Registered nosave memory: 00000000e7400000 - 00000000e7401000 [ 0.000000] PM: Registered nosave memory: 00000000e7401000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:27500000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s84056 r8192 d22440 u1048576 [ 0.000000] pcpu-alloc: s84056 r8192 d22440 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 958558 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc3-debug root=/dev/sda3 ro usbcore.autosuspend=1 init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3769132k/5242880k available (4714k kernel code, 1336556k absent, 136292k reserved, 2553k data, 468k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3051.255 MHz processor. [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6104.78 BogoMIPS (lpj=10170850) [ 0.003756] Mount-cache hash table entries: 256 [ 0.004065] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004369] CPU: L2 cache: 6144K [ 0.004555] CPU: Physical Processor ID: 0 [ 0.004753] CPU: Processor Core ID: 0 [ 0.004939] mce: CPU supports 6 MCE banks [ 0.005141] CPU0: Thermal monitoring enabled (TM2) [ 0.005340] using mwait in idle threads. [ 0.005538] Performance Events: Core2 events, Intel PMU driver. [ 0.006670] ... version: 2 [ 0.006868] ... bit width: 40 [ 0.007065] ... generic registers: 2 [ 0.007258] ... value mask: 000000ffffffffff [ 0.007423] ... max period: 000000007fffffff [ 0.007620] ... fixed-purpose events: 3 [ 0.007817] ... event mask: 0000000700000003 [ 0.008028] ACPI: Core revision 20090903 [ 0.017610] Setting APIC routing to flat [ 0.018189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.051367] CPU0: Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06GHz stepping 0a [ 0.053333] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.006666] Initializing CPU#1 [ 0.006666] Calibrating delay using timer specific routine.. 6105.84 BogoMIPS (lpj=10170955) [ 0.006666] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006666] CPU: L2 cache: 6144K [ 0.006666] CPU: Physical Processor ID: 0 [ 0.006666] CPU: Processor Core ID: 1 [ 0.006666] mce: CPU supports 6 MCE banks [ 0.006666] CPU1: Thermal monitoring enabled (TM2) [ 0.143363] CPU1: Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06GHz stepping 0a [ 0.145482] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146690] Brought up 2 CPUs [ 0.146864] Total of 2 processors activated (12209.62 BogoMIPS). [ 0.150009] CPU0 attaching sched-domain: [ 0.150012] domain 0: span 0-1 level MC [ 0.150014] groups: 0 1 [ 0.150018] CPU1 attaching sched-domain: [ 0.150019] domain 0: span 0-1 level MC [ 0.150021] groups: 1 0 [ 0.156853] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots. [ 0.157280] regulator: core version 0.5 [ 0.157523] NET: Registered protocol family 16 [ 0.158196] ACPI: bus type pci registered [ 0.158692] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.158884] PCI: MCFG area at f0000000 reserved in E820 [ 0.159078] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.161181] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.161380] PCI: Using configuration type 1 for base access [ 0.170081] bio: create slab at 0 [ 0.177460] ACPI: EC: EC description table is found, configuring boot EC [ 0.180241] ACPI: BIOS _OSI(Linux) query ignored [ 0.180873] ACPI: Interpreter enabled [ 0.181072] ACPI: (supports S0 S3 S4 S5) [ 0.181816] ACPI: Using IOAPIC for interrupt routing [ 0.197061] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62 [ 0.197560] ACPI: No dock devices found. [ 0.197969] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.198397] pci 0000:00:03.0: reg 10 io port: [0x3000-0x30ff] [ 0.198485] pci 0000:00:03.2: reg 10 io port: [0x3180-0x31bf] [ 0.198496] pci 0000:00:03.2: reg 20 io port: [0x3140-0x317f] [ 0.198500] pci 0000:00:03.2: reg 24 io port: [0x3100-0x313f] [ 0.198520] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.198723] pci 0000:00:03.2: PME# disabled [ 0.199057] pci 0000:00:03.5: reg 10 32bit mmio: [0xe7400000-0xe747ffff] [ 0.199141] pci 0000:00:04.0: reg 10 32bit mmio: [0xe7488000-0xe7488fff] [ 0.210026] pci 0000:00:04.0: supports D1 D2 [ 0.210028] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210230] pci 0000:00:04.0: PME# disabled [ 0.210450] pci 0000:00:04.1: reg 10 32bit mmio: [0xe7489200-0xe74892ff] [ 0.210488] pci 0000:00:04.1: supports D1 D2 [ 0.210489] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210691] pci 0000:00:04.1: PME# disabled [ 0.210916] pci 0000:00:06.0: reg 10 32bit mmio: [0xe7487000-0xe7487fff] [ 0.210944] pci 0000:00:06.0: supports D1 D2 [ 0.210946] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.211148] pci 0000:00:06.0: PME# disabled [ 0.211367] pci 0000:00:06.1: reg 10 32bit mmio: [0xe7489100-0xe74891ff] [ 0.211403] pci 0000:00:06.1: supports D1 D2 [ 0.211405] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.211606] pci 0000:00:06.1: PME# disabled [ 0.211830] pci 0000:00:08.0: reg 10 32bit mmio: [0xe7480000-0xe7483fff] [ 0.211855] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.212038] pci 0000:00:08.0: PME# disabled [ 0.212284] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe7486000-0xe7486fff] [ 0.212288] pci 0000:00:0a.0: reg 14 io port: [0x31e0-0x31e7] [ 0.212291] pci 0000:00:0a.0: reg 18 32bit mmio: [0xe7489000-0xe74890ff] [ 0.212294] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xe7489300-0xe748930f] [ 0.212314] pci 0000:00:0a.0: supports D1 D2 [ 0.212315] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.212518] pci 0000:00:0a.0: PME# disabled [ 0.212713] pci 0000:00:0b.0: reg 10 io port: [0x31d8-0x31df] [ 0.212717] pci 0000:00:0b.0: reg 14 io port: [0x31ec-0x31ef] [ 0.212720] pci 0000:00:0b.0: reg 18 io port: [0x31d0-0x31d7] [ 0.212723] pci 0000:00:0b.0: reg 1c io port: [0x31e8-0x31eb] [ 0.212726] pci 0000:00:0b.0: reg 20 io port: [0x31c0-0x31cf] [ 0.212729] pci 0000:00:0b.0: reg 24 32bit mmio: [0xe7484000-0xe7485fff] [ 0.212958] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213164] pci 0000:00:0c.0: PME# disabled [ 0.213582] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213788] pci 0000:00:15.0: PME# disabled [ 0.214225] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.214431] pci 0000:00:16.0: PME# disabled [ 0.214704] pci 0000:00:09.0: transparent bridge [ 0.214905] pci 0000:00:09.0: bridge 32bit mmio: [0xe7300000-0xe73fffff] [ 0.214948] pci 0000:02:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff] [ 0.214962] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.214977] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe2000000-0xe3ffffff] [ 0.214987] pci 0000:02:00.0: reg 24 io port: [0x2000-0x207f] [ 0.214998] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xe5000000-0xe507ffff] [ 0.215082] pci 0000:00:0c.0: bridge io port: [0x2000-0x2fff] [ 0.215089] pci 0000:00:0c.0: bridge 32bit mmio: [0xe2000000-0xe50fffff] [ 0.215102] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.215309] pci 0000:04:00.0: reg 10 64bit mmio: [0xe7200000-0xe7203fff] [ 0.215362] pci 0000:04:00.0: supports D1 D2 [ 0.215363] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.215565] pci 0000:04:00.0: PME# disabled [ 0.215827] pci 0000:00:15.0: bridge 32bit mmio: [0xe7200000-0xe72fffff] [ 0.215888] pci 0000:05:00.0: reg 10 64bit mmio: [0xe7100000-0xe7100fff] [ 0.215940] pci 0000:05:00.0: supports D1 D2 [ 0.215941] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216144] pci 0000:05:00.0: PME# disabled [ 0.216387] pci 0000:00:16.0: bridge 32bit mmio: [0xe7100000-0xe71fffff] [ 0.216439] pci_bus 0000:00: on NUMA node 0 [ 0.216442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.263431] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.265189] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.266848] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.268540] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.270188] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.272045] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.274132] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.276170] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.278027] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.280062] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.282041] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.284020] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.285928] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.287844] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.289829] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.291786] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.293687] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10 [ 0.295544] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.297598] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.299610] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.301516] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7 [ 0.303386] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.305358] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.307355] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.309313] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.311332] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.313338] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.315301] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.317214] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.319207] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.321011] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.322976] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.324915] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15 [ 0.326850] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.328694] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10 [ 0.330562] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14 [ 0.332378] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15 [ 0.334283] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.336292] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.338270] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11 [ 0.340179] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. [ 0.342187] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7 [ 0.343954] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5 [ 0.345764] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14 [ 0.347582] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.347844] vgaarb: loaded [ 0.348134] SCSI subsystem initialized [ 0.353344] libata version 3.00 loaded. [ 0.353398] usbcore: registered new interface driver usbfs [ 0.353619] usbcore: registered new interface driver hub [ 0.353847] usbcore: registered new device driver usb [ 0.354163] PCI: Using ACPI for IRQ routing [ 0.354741] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.355586] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.360005] Switching to clocksource tsc [ 0.371094] Slow work thread pool: Starting up [ 0.371315] Slow work thread pool: Ready [ 0.371518] FS-Cache: Loaded [ 0.371743] CacheFiles: Loaded [ 0.371944] pnp: PnP ACPI init [ 0.372143] ACPI: bus type pnp registered [ 0.377592] pnp: PnP ACPI: found 9 devices [ 0.377789] ACPI: ACPI bus type pnp unregistered [ 0.377993] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.378198] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.378402] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.378604] system 00:06: ioport range 0x480-0x4ff has been reserved [ 0.378805] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.379007] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.379208] system 00:06: ioport range 0x800-0x87f has been reserved [ 0.379408] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.379594] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.379796] system 00:06: ioport range 0x295-0x296 has been reserved [ 0.385091] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.385291] pci 0000:00:09.0: IO window: disabled [ 0.385464] pci 0000:00:09.0: MEM window: 0xe7300000-0xe73fffff [ 0.385665] pci 0000:00:09.0: PREFETCH window: disabled [ 0.385865] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.386035] pci 0000:00:0c.0: IO window: 0x2000-0x2fff [ 0.386243] pci 0000:00:0c.0: MEM window: 0xe2000000-0xe50fffff [ 0.386438] pci 0000:00:0c.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.386717] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.386917] pci 0000:00:15.0: IO window: disabled [ 0.387123] pci 0000:00:15.0: MEM window: 0xe7200000-0xe72fffff [ 0.387323] pci 0000:00:15.0: PREFETCH window: disabled [ 0.387499] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05 [ 0.387699] pci 0000:00:16.0: IO window: disabled [ 0.387905] pci 0000:00:16.0: MEM window: 0xe7100000-0xe71fffff [ 0.388110] pci 0000:00:16.0: PREFETCH window: disabled [ 0.388317] pci 0000:00:09.0: enabling device (0000 -> 0002) [ 0.388520] pci 0000:00:09.0: setting latency timer to 64 [ 0.388891] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23 [ 0.389114] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23 [ 0.389427] pci 0000:00:0c.0: setting latency timer to 64 [ 0.389904] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22 [ 0.390102] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22 [ 0.390369] pci 0000:00:15.0: setting latency timer to 64 [ 0.390784] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21 [ 0.390985] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21 [ 0.391251] pci 0000:00:16.0: setting latency timer to 64 [ 0.391256] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.391258] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.391259] pci_bus 0000:01: resource 1 mem: [0xe7300000-0xe73fffff] [ 0.391261] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.391262] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.391264] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.391265] pci_bus 0000:02: resource 1 mem: [0xe2000000-0xe50fffff] [ 0.391267] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.391268] pci_bus 0000:04: resource 1 mem: [0xe7200000-0xe72fffff] [ 0.391270] pci_bus 0000:05: resource 1 mem: [0xe7100000-0xe71fffff] [ 0.391287] NET: Registered protocol family 2 [ 0.391538] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.392183] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.393822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.394484] TCP: Hash tables configured (established 262144 bind 65536) [ 0.394685] TCP reno registered [ 0.394935] NET: Registered protocol family 1 [ 0.396111] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.396321] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.396541] Microcode Update Driver: v2.00 , Peter Oruba [ 0.396794] Scanning for low memory corruption every 60 seconds [ 0.397123] Intel AES-NI instructions are not detected. [ 0.405841] VFS: Disk quotas dquot_6.5.2 [ 0.406087] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.406752] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.406986] msgmni has been set to 7363 [ 0.415839] alg: No test for cipher_null (cipher_null-generic) [ 0.416027] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.416241] alg: No test for digest_null (digest_null-generic) [ 0.416454] alg: No test for compress_null (compress_null-generic) [ 0.417124] alg: No test for fcrypt (fcrypt-generic) [ 0.418531] alg: No test for stdrng (krng) [ 0.421983] alg: No test for ghash (ghash-generic) [ 0.422244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.422530] io scheduler noop registered [ 0.422734] io scheduler cfq registered (default) [ 0.423111] pci 0000:02:00.0: Boot video device [ 0.423388] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.423408] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.423771] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X [ 0.423790] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 0.424151] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X [ 0.424169] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 0.424567] ACPI: AC Adapter [ADP1] (on-line) [ 0.424866] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.425170] ACPI: Lid Switch [LID0] [ 0.425408] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.425669] ACPI: Power Button [PWRB] [ 0.425909] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.426143] ACPI: Sleep Button [SLPB] [ 0.426376] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.426636] ACPI: Power Button [PWRF] [ 0.427524] ACPI: SSDT 00000000bfec5a98 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109) [ 0.428326] ACPI: SSDT 00000000bfec3c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) [ 0.429136] Monitor-Mwait will be used to enter C-1 state [ 0.429149] Monitor-Mwait will be used to enter C-2 state [ 0.429170] Monitor-Mwait will be used to enter C-3 state [ 0.429175] Marking TSC unstable due to TSC halts in idle [ 0.429410] Switching to clocksource hpet [ 0.429443] processor LNXCPU:00: registered as cooling_device0 [ 0.429816] ACPI: SSDT 00000000bfec4f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) [ 0.430588] ACPI: SSDT 00000000bfec3f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) [ 0.432503] Switched to high resolution mode on CPU 1 [ 0.432515] Switched to high resolution mode on CPU 0 [ 0.440902] processor LNXCPU:01: registered as cooling_device1 [ 0.453989] Linux agpgart interface v0.103 [ 0.454300] [drm] Initialized drm 1.1.0 20060810 [ 0.455964] brd: module loaded [ 0.456822] loop: module loaded [ 0.457113] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.457646] ahci 0000:00:0b.0: version 3.0 [ 0.457923] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20 [ 0.458127] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 [ 0.458465] ahci 0000:00:0b.0: irq 27 for MSI/MSI-X [ 0.458518] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode [ 0.458780] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part [ 0.459008] ahci 0000:00:0b.0: setting latency timer to 64 [ 0.459178] scsi0 : ahci [ 0.459576] scsi1 : ahci [ 0.459837] scsi2 : ahci [ 0.460183] scsi3 : ahci [ 0.460534] scsi4 : ahci [ 0.460852] scsi5 : ahci [ 0.461176] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 27 [ 0.461486] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 27 [ 0.461745] ata3: DUMMY [ 0.461940] ata4: DUMMY [ 0.462136] ata5: DUMMY [ 0.462309] ata6: DUMMY [ 0.462747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.463222] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19 [ 0.463601] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19 [ 0.463867] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.463869] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.464071] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 0.464539] ehci_hcd 0000:00:04.1: debug port 1 [ 0.464744] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 0.464754] ehci_hcd 0000:00:04.1: irq 19, io mem 0xe7489200 [ 0.473357] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.473712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.473913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.474169] usb usb1: Product: EHCI Host Controller [ 0.474422] usb usb1: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd [ 0.474668] usb usb1: SerialNumber: 0000:00:04.1 [ 0.474912] usb usb1: configuration #1 chosen from 1 choice [ 0.475147] hub 1-0:1.0: USB hub found [ 0.475348] hub 1-0:1.0: 7 ports detected [ 0.475962] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18 [ 0.476214] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18 [ 0.476441] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 0.476443] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 0.476646] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 0.476938] ehci_hcd 0000:00:06.1: debug port 1 [ 0.477141] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported [ 0.477151] ehci_hcd 0000:00:06.1: irq 18, io mem 0xe7489100 [ 0.486690] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 0.486996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.487245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.487500] usb usb2: Product: EHCI Host Controller [ 0.487701] usb usb2: Manufacturer: Linux 2.6.32-rc3-debug ehci_hcd [ 0.487936] usb usb2: SerialNumber: 0000:00:06.1 [ 0.488226] usb usb2: configuration #1 chosen from 1 choice [ 0.488654] hub 2-0:1.0: USB hub found [ 0.488903] hub 2-0:1.0: 5 ports detected [ 0.489181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.489626] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17 [ 0.489828] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17 [ 0.490108] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.490109] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.490311] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 0.490584] ohci_hcd 0000:00:04.0: irq 17, io mem 0xe7488000 [ 0.526875] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132) [ 0.527418] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132) [ 0.527961] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132) [ 0.528499] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132) [ 0.545416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.545618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.545873] usb usb3: Product: OHCI Host Controller [ 0.546072] usb usb3: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd [ 0.546260] usb usb3: SerialNumber: 0000:00:04.0 [ 0.546596] usb usb3: configuration #1 chosen from 1 choice [ 0.547003] hub 3-0:1.0: USB hub found [ 0.547238] hub 3-0:1.0: 7 ports detected [ 0.547794] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 16 [ 0.547996] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 16 (level, low) -> IRQ 16 [ 0.548346] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 0.548349] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 0.548608] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 0.548934] ohci_hcd 0000:00:06.0: irq 16, io mem 0xe7487000 [ 0.554536] ACPI: Battery Slot [BAT0] (battery present) [ 0.602851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.603053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.603307] usb usb4: Product: OHCI Host Controller [ 0.603506] usb usb4: Manufacturer: Linux 2.6.32-rc3-debug ohci_hcd [ 0.603679] usb usb4: SerialNumber: 0000:00:06.0 [ 0.603903] usb usb4: configuration #1 chosen from 1 choice [ 0.604134] hub 4-0:1.0: USB hub found [ 0.604342] hub 4-0:1.0: 5 ports detected [ 0.604617] usbcore: registered new interface driver libusual [ 0.604908] PNP: No PS/2 controller found. Probing ports directly. [ 0.605954] i8042.c: No controller found. [ 0.606232] mice: PS/2 mouse device common for all mice [ 0.606495] i2c i2c-0: nForce2 SMBus adapter at 0x3140 [ 0.606728] i2c i2c-1: nForce2 SMBus adapter at 0x3100 [ 0.607213] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.607688] cpuidle: using governor ladder [ 0.608227] cpuidle: using governor menu [ 0.609961] usbcore: registered new interface driver hiddev [ 0.610225] usbcore: registered new interface driver usbhid [ 0.610424] usbhid: v2.6:USB HID core driver [ 0.610817] TCP cubic registered [ 0.611349] NET: Registered protocol family 10 [ 0.611835] lo: Disabled Privacy Extensions [ 0.612224] Mobile IPv6 [ 0.612420] NET: Registered protocol family 17 [ 0.612619] NET: Registered protocol family 15 [ 0.613598] PM: Resume from disk failed. [ 0.783480] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 0.914587] usb 1-4: New USB device found, idVendor=05ac, idProduct=8507 [ 0.914795] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.914999] usb 1-4: Product: Built-in iSight [ 0.915198] usb 1-4: Manufacturer: Apple Inc. [ 0.915398] usb 1-4: SerialNumber: 8H98400GG8DD3A1A [ 0.915737] usb 1-4: configuration #1 chosen from 1 choice [ 0.940158] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.940378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.940576] ata1.00: ATA-8: APPLE SSD TS256A, AGAB0202, max UDMA/100 [ 0.940580] ata1.00: 490234752 sectors, multi 16: LBA48 [ 0.940872] ata1.00: configured for UDMA/100 [ 0.946824] ata2.00: ATAPI: HL-DT-ST DVDRW GS23N, SB00, max UDMA/133, ATAPI AN [ 0.952363] ata2.00: configured for UDMA/133 [ 0.953609] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS256A AGAB PQ: 0 ANSI: 5 [ 0.954281] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB) [ 0.954344] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.954793] sd 0:0:0:0: [sda] Write Protect is off [ 0.954978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.955006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.955411] sda: sda1 sda2 sda3 sda4 sda5 [ 0.959529] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.973423] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS23N SB00 PQ: 0 ANSI: 5 [ 0.985264] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy [ 0.985472] Uniform CD-ROM driver Revision: 3.20 [ 0.985954] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.986144] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.988619] EXT3-fs: INFO: recovery required on readonly filesystem. [ 0.988826] EXT3-fs: write access will be enabled during recovery. [ 0.993632] kjournald starting. Commit interval 5 seconds [ 0.993668] EXT3-fs: recovery complete. [ 0.993911] EXT3-fs: mounted filesystem with writeback data mode. [ 0.993931] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 0.993952] Freeing unused kernel memory: 468k freed [ 1.290145] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 1.419982] usb 2-5: New USB device found, idVendor=05ac, idProduct=8403 [ 1.420208] usb 2-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 1.420422] usb 2-5: Product: Card Reader [ 1.420621] usb 2-5: Manufacturer: Apple [ 1.420819] usb 2-5: SerialNumber: 000000009833 [ 1.421808] usb 2-5: configuration #1 chosen from 1 choice [ 1.437137] Initializing USB Mass Storage driver... [ 1.437519] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.437967] usb-storage: device found at 3 [ 1.437969] usb-storage: waiting for device to settle before scanning [ 1.437996] usbcore: registered new interface driver usb-storage [ 1.438200] USB Mass Storage support registered. [ 1.700137] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 1.901968] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 1.902173] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.902376] usb 4-1: Product: BRCM2046 Hub [ 1.902575] usb 4-1: Manufacturer: Apple Inc. [ 1.902921] usb 4-1: configuration #1 chosen from 1 choice [ 1.905010] hub 4-1:1.0: USB hub found [ 1.907962] hub 4-1:1.0: 3 ports detected [ 2.200145] usb 3-5: new low speed USB device using ohci_hcd and address 2 [ 2.395535] usb 3-5: New USB device found, idVendor=05ac, idProduct=8242 [ 2.395726] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.395929] usb 3-5: Product: IR Receiver [ 2.396123] usb 3-5: Manufacturer: Apple Computer, Inc. [ 2.396459] usb 3-5: configuration #1 chosen from 1 choice [ 2.414764] apple 0003:05AC:8242.0001: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0 [ 2.693477] usb 3-6: new full speed USB device using ohci_hcd and address 3 [ 2.897533] usb 3-6: New USB device found, idVendor=05ac, idProduct=0237 [ 2.897739] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.897943] usb 3-6: Product: Apple Internal Keyboard / Trackpad [ 2.898145] usb 3-6: Manufacturer: Apple Inc. [ 2.898490] usb 3-6: configuration #1 chosen from 1 choice [ 2.912334] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input5 [ 2.912704] apple 0003:05AC:0237.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0 [ 3.412646] apple 0003:05AC:0237.0003: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1 [ 3.484967] usb 4-1.1: new full speed USB device using ohci_hcd and address 3 [ 3.601969] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=8217 [ 3.602177] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.602435] usb 4-1.1: Product: Bluetooth USB Host Controller [ 3.602635] usb 4-1.1: Manufacturer: Apple Inc. [ 3.602835] usb 4-1.1: SerialNumber: 002608DA9686 [ 3.603179] usb 4-1.1: configuration #1 chosen from 1 choice [ 6.437436] usb-storage: device scan complete [ 6.439909] scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0 [ 6.441199] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 6.442638] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 58.357908] BUG: unable to handle kernel paging request at ffffffffa0015178 [ 58.358358] IP: [] vsnprintf+0x5e/0x5e0 [ 58.358703] PGD 1003067 PUD 1007063 PMD 13f3ac067 PTE 0 [ 58.359453] Oops: 0000 [#1] PREEMPT SMP [ 58.360003] last sysfs file: [ 58.360003] CPU 0 [ 58.360003] Modules linked in: tun(+) usb_storage [ 58.360003] Pid: 895, comm: modprobe Not tainted 2.6.32-rc3-debug #24 MacBookPro5,3 [ 58.360003] RIP: 0010:[] [] vsnprintf+0x5e/0x5e0 [ 58.360003] RSP: 0018:ffff88013e803d48 EFLAGS: 00010086 [ 58.360003] RAX: 0000000000005c5c RBX: 0000000000000400 RCX: ffff88013e803ea8 [ 58.360003] RDX: ffffffffa0015178 RSI: 0000000000000400 RDI: ffffffff817c8c60 [ 58.360003] RBP: ffff88013e803dd8 R08: 0000000000000000 R09: 0000000000000000 [ 58.360003] R10: ffff880028401740 R11: 0000000000000000 R12: ffffffffa0015178 [ 58.360003] R13: ffffffffa0015178 R14: ffff88013e803ea8 R15: ffffffff817c9060 [ 58.360003] FS: 00007f7b8d4c76f0(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 [ 58.360003] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 58.360003] CR2: ffffffffa0015178 CR3: 000000013fbeb000 CR4: 00000000000406f0 [ 58.360003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 58.360003] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 58.360003] Process modprobe (pid: 895, threadinfo ffff88013e802000, task ffff88013f925880) [ 58.360003] Stack: [ 58.360003] 00000000fffffff4 ffff88013e803dc8 ffff88013f9cbaa0 000000003e803dc8 [ 58.360003] <0> ffff88013e803db8 ffffea00045f1ba0 0000000000000400 ffffffff817c8c60 [ 58.360003] <0> 0000000000000000 0000000000000000 0000000000000000 ffffffff810bbe6a [ 58.360003] Call Trace: [ 58.360003] [] ? free_hot_page+0x2a/0x90 [ 58.360003] [] vscnprintf+0x11/0x30 [ 58.360003] [] vprintk+0xb1/0x4f0 [ 58.360003] [] ? trace_module_notify+0x3f/0x550 [ 58.360003] [] ? tun_init+0x0/0x93 [tun] [ 58.360003] [] printk+0x3c/0x41 [ 58.360003] [] tun_init+0x25/0x93 [tun] [ 58.360003] [] do_one_initcall+0x37/0x190 [ 58.360003] [] sys_init_module+0xd6/0x250 [ 58.360003] [] system_call_fastpath+0x16/0x1b [ 58.360003] Code: c7 45 c0 00 00 00 00 85 f6 0f 88 5f 05 00 00 4c 8b 7d a8 4c 03 7d a0 73 12 48 8b 45 a8 49 c7 c7 ff ff ff ff 48 f7 d0 48 89 45 a0 <41> 0f b6 45 00 8b 55 a8 48 8b 5d a8 89 55 9c 84 c0 74 76 0f 1f [ 58.360003] RIP [] vsnprintf+0x5e/0x5e0 [ 58.360003] RSP [ 58.360003] CR2: ffffffffa0015178 [ 58.360003] ---[ end trace 11656a28751a5869 ]--- [ 58.360003] note: modprobe[895] exited with preempt_count 2 [ 58.379243] BUG: scheduling while atomic: modprobe/895/0x10000003 [ 58.379454] Modules linked in: tun(+) usb_storage [ 58.380051] Pid: 895, comm: modprobe Tainted: G D 2.6.32-rc3-debug #24 [ 58.380307] Call Trace: [ 58.380506] [] __schedule_bug+0x5c/0x70 [ 58.380697] [] thread_return+0x409/0x7e6 [ 58.380901] [] ? number+0x2c1/0x2f0 [ 58.381114] [] __cond_resched+0x25/0x40 [ 58.381300] [] _cond_resched+0x2b/0x40 [ 58.381482] [] unmap_vmas+0x817/0x9b0 [ 58.381668] [] exit_mmap+0xef/0x1c0 [ 58.381871] [] mmput+0x2d/0xe0 [ 58.382072] [] exit_mm+0x100/0x140 [ 58.382248] [] ? acct_collect+0x158/0x1a0 [ 58.382423] [] do_exit+0x65c/0x7d0 [ 58.382625] [] ? release_console_sem+0x1b8/0x210 [ 58.382830] [] oops_end+0x75/0xa0 [ 58.383022] [] no_context+0xea/0x250 [ 58.383218] [] __bad_area_nosemaphore+0x115/0x1d0 [ 58.383441] [] ? sysfs_ilookup_test+0x0/0x20 [ 58.383644] [] bad_area_nosemaphore+0xe/0x10 [ 58.383846] [] do_page_fault+0x23a/0x2e0 [ 58.384050] [] page_fault+0x1f/0x30 [ 58.384254] [] ? vsnprintf+0x5e/0x5e0 [ 58.384473] [] ? free_hot_page+0x2a/0x90 [ 58.384676] [] vscnprintf+0x11/0x30 [ 58.384879] [] vprintk+0xb1/0x4f0 [ 58.385058] [] ? trace_module_notify+0x3f/0x550 [ 58.385241] [] ? tun_init+0x0/0x93 [tun] [ 58.385444] [] printk+0x3c/0x41 [ 58.385646] [] tun_init+0x25/0x93 [tun] [ 58.385849] [] do_one_initcall+0x37/0x190 [ 58.386051] [] sys_init_module+0xd6/0x250 [ 58.386254] [] system_call_fastpath+0x16/0x1b [ 178.994918] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 178.995345] EXT3 FS on sda3, internal journal