| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 21 Nov 2009 14:40:27 +0100
From: Martin Fuzzey <mfuzzey@...il.com>
To: tsbogend@...ha.franken.de, linux-serial@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [RFC PATCH 9/9] Serial: sc26xx - introduce a structure for platform
data.
Encapsulates the existing array of uint for signal mapping
and adds baudrate group selection.
Signed-off-by: Martin Fuzzey <mfuzzey@...il.com>
---
arch/mips/sni/a20r.c | 15 ++++++++----
drivers/serial/sc26xx.c | 49 +++++++++++++++++++++++++++++++++++----
include/linux/serial_sc2xxx.h | 52 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 107 insertions(+), 9 deletions(-)
create mode 100644 include/linux/serial_sc2xxx.h
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 7dd76fb..6fac5b2 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/serial_sc2xxx.h>
#include <asm/sni.h>
#include <asm/time.h>
@@ -117,10 +118,14 @@ static struct resource sc26xx_rsrc[] = {
}
};
-static unsigned int sc26xx_data[2] = {
- /* DTR | RTS | DSR | CTS | DCD | RI */
- (8 << 0) | (4 << 4) | (6 << 8) | (0 << 12) | (6 << 16) | (0 << 20),
- (3 << 0) | (2 << 4) | (1 << 8) | (2 << 12) | (3 << 16) | (4 << 20)
+static struct plat_serial_sc2xxx sc26xx_data = {
+ .signal_map = {
+ /* DTR | RTS | DSR | CTS | DCD | RI */
+ (8 << 0) | (4 << 4) | (6 << 8) | (0 << 12) | (6 << 16) | (0 << 20),
+ (3 << 0) | (2 << 4) | (1 << 8) | (2 << 12) | (3 << 16) | (4 << 20)
+ },
+ .baud_mode = 1,
+ .baud_group = 2,
};
static struct platform_device sc26xx_pdev = {
@@ -128,7 +133,7 @@ static struct platform_device sc26xx_pdev = {
.num_resources = ARRAY_SIZE(sc26xx_rsrc),
.resource = sc26xx_rsrc,
.dev = {
- .platform_data = sc26xx_data,
+ .platform_data = &sc26xx_data,
}
};
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index 6764082..842692f 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/serial_sc2xxx.h>
#if defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -170,6 +171,10 @@ static struct chip_def chip_2892 = {
.init_mr1 = (1 << 6),
};
+static const struct chip_def *chips[] = {
+ &chip_26xx,
+ &chip_2892
+};
static struct uart_sc26xx_port *driver_info(struct uart_port *port)
{
@@ -736,9 +741,17 @@ static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
static int __devinit init_baudgroup(struct uart_sc26xx_port *up)
{
+ struct plat_serial_sc2xxx *pdata = up->port[0].dev->platform_data;
+
u8 baud_mode = up->chip->default_baud_mode;
u8 baud_group = up->chip->default_baud_group;
+ if (pdata->baud_mode > 0)
+ baud_mode = pdata->baud_mode - 1;
+
+ if (pdata->baud_group > 0)
+ baud_group = pdata->baud_group - 1;
+
if (baud_mode > up->chip->max_baud_mode) {
printk(KERN_ERR "Baud mode %d not supported for %s\n",
baud_mode, up->chip->name);
@@ -762,6 +775,20 @@ static int __devinit init_baudgroup(struct uart_sc26xx_port *up)
return 0;
}
+static const struct chip_def * __devinit chip_by_name(const char *name)
+{
+ int i;
+ const struct chip_def *chip;
+
+ for (i = 0; i < ARRAY_SIZE(chips); i++) {
+ chip = chips[i];
+ if (!strcmp(chip->name, name))
+ return chip;
+ }
+
+ return NULL;
+}
+
static const struct chip_def * __devinit detect_chip_type(
struct uart_sc26xx_port *up)
{
@@ -792,9 +819,14 @@ static int __devinit sc26xx_probe(struct platform_device *dev)
{
struct resource *res, *irq_res;
struct uart_sc26xx_port *up;
- unsigned int *sc26xx_data = dev->dev.platform_data;
+ struct plat_serial_sc2xxx *pdata = dev->dev.platform_data;
int err;
+ if (!pdata) {
+ dev_err(&dev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
@@ -819,16 +851,25 @@ static int __devinit sc26xx_probe(struct platform_device *dev)
up->port[0].dev = &dev->dev;
- sc26xx_init_masks(up, 0, sc26xx_data[0]);
+ sc26xx_init_masks(up, 0, pdata->signal_map[0]);
sc26xx_port = &up->port[0];
memcpy(&up->port[1], &up->port[0], sizeof(up->port[0]));
up->port[1].line = 1;
- sc26xx_init_masks(up, 1, sc26xx_data[1]);
+ sc26xx_init_masks(up, 1, pdata->signal_map[1]);
+
+ if (pdata->chip_name)
+ up->chip = chip_by_name(pdata->chip_name);
+ if (!up->chip) {
+ if (pdata->chip_name)
+ dev_warn(&dev->dev,
+ "Unknown chip %s requested - use autodetect\n",
+ pdata->chip_name);
+ up->chip = detect_chip_type(up);
+ }
- up->chip = detect_chip_type(up);
err = init_baudgroup(up);
if (err)
goto out_free_port;
diff --git a/include/linux/serial_sc2xxx.h b/include/linux/serial_sc2xxx.h
new file mode 100644
index 0000000..d93977f
--- /dev/null
+++ b/include/linux/serial_sc2xxx.h
@@ -0,0 +1,52 @@
+/*
+ *
+ * Copyright (C) 2009 Martin Fuzzey
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#ifndef _LINUX_SERIAL_SC26XX_H
+#define _LINUX_SERIAL_SC26XX_H 1
+
+
+/**
+ * struct plat_sc2xxx - Philips UART platform data
+ * @signal_map: Hardware signal mapping (see below)
+ *
+ * @chip_name: One of "SC26xx", "SC2892" or NULL for autodetect
+ *
+ * @baud_mode: Baudrate mode + 1 (1,2,3) must be 1 for SC26xx see
+ * datasheet or baud_rates[] in driver code for available
+ * baudrates in each mode
+ * 0 = use driver default
+ *
+ * @baud_group: Baudrate group + 1 (1, 2) within mode
+ * 0 = use driver default
+ *
+ * For each port signal_map is a bitfield defined as follows:
+ * bits 0-3 DTR
+ * bits 4-7 RTS
+ * bits 8-11 DSR
+ * bits 12-15 CTS
+ * bits 16-19 DCD
+ * bits 20-23 RI
+ *
+ * Value of each field is 1 + corresponding IP/OP pin or 0 if not connected
+ * Eg:
+ * (3 << 0) | (1 << 4) | (3 << 8) | (1 << 12) | (4 << 16) | (0 << 20),
+ * =>
+ * DTR=OP2, RTS=OP0, DSR=IP2, CTS=IP0, DCD=IP3, RI=NC
+ *
+ **/
+struct plat_serial_sc2xxx {
+ unsigned int signal_map[2];
+ const char *chip_name;
+ u8 baud_mode;
+ u8 baud_group;
+};
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists