| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 Nov 2009 18:34:56 +0100 (CET)
From: Stefan Richter <stefanr@...6.in-berlin.de>
To: linux-kernel@...r.kernel.org
cc: linux1394-devel@...ts.sourceforge.net
Subject: What's in linux1394-2.6.git?
Here is a summary of what is currently queued up in
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
and also visible in linux-next. Gitweb:
http://git.kernel.org/?p=linux/kernel/git/ieee1394/linux1394-2.6.git
fixes branch
============
These are two fixes which make the new firewire driver stack
interoperable with FFADO, the userspace drivers for FireWire audio
interfaces. I will ask Linus to pull this branch later this week, in
hope to get these fixes released in 2.6.32.
In addition to these two kernel fixes, there are also some updates to
the firewire-core backend of libraw1394 necessary to make it work with
FFADO. At the moment these proposed updates are queued up at the
"testing" branch of
git://git.kernel.org/pub/scm/libs/ieee1394/libraw1394.git testing
Here is the shortlog and diffstat of the fixes branch; full log and diff
follow at the end of this message:
Jay Fenlason (2):
firewire: ohci: Make cycleMatch ISO transmission work
firewire: ohci: pass correct iso xmit timestamps to core
drivers/firewire/ohci.c | 41 +++++++++++++++++++++++++++++++++-----
1 files changed, 35 insertions(+), 6 deletions(-)
Many thanks to Jay for debugging and fixing these issues.
Some more kernel work will be neessary for fully satisfactory support of
FireWire audio interfaces: Multiplex FCP requests as necessary for
multiple device support; implement variable split transaction time-out;
longer-term: implement a kernelspace streaming component for FFADO (some
groundwork has been done in a GSoC project).
master branch
=============
This is for the post 2.6.32 merge window. We have got minor fixes and
tweaks, among them reduced stack usage in ioctls and and a considerable
reduction of stack usage in the bus reset handler tasklet.
Akinobu Mita (1):
ieee1394: Use hweight32
Stefan Richter (9):
firewire: cdev: fix memory leak in an error path
firewire: normalize style of queue_work wrappers
firewire: cdev: normalize variable names
firewire: optimize config ROM creation
firewire: core: clarify generate_config_rom usage
firewire: core: optimize Topology Map creation
firewire: core: WARN on wrong usage of core transaction functions
firewire: ohci: 0 may be a valid DMA address
firewire: cdev: reduce stack usage by ioctl_dispatch
drivers/firewire/core-card.c | 75 ++++++++----------
drivers/firewire/core-cdev.c | 113 ++++++++++++++++-----------
drivers/firewire/core-topology.c | 17 +++--
drivers/firewire/core-transaction.c | 19 ++---
drivers/firewire/core.h | 9 +-
drivers/firewire/ohci.c | 39 ++++++----
drivers/firewire/sbp2.c | 9 ++-
drivers/ieee1394/ohci1394.c | 8 +--
include/linux/firewire.h | 17 +----
9 files changed, 159 insertions(+), 147 deletions(-)
firedtv branch
==============
This is only a temporary branch with updates of the FireDTV DVB driver.
These updates are currently picked up by Mauro and will go into the
mainline via the V4L-DVB tree. Most notably, the firedtv driver is now
finally ported from the old ieee1394 stack to the new firewire stack.
Depending on which one or two of the stacks are chosen in Kconfig, the
firedtv driver is built with an interface to one or both of the stacks.
Stefan Richter (11):
firedtv: move remote control workqueue handling into rc source file
firedtv: reform lock transaction backend call
firedtv: add missing include, rename a constant
firedtv: port to new firewire core
firedtv: shrink buffer pointer table
firedtv: packet requeuing is likely to succeed
firedtv: remove an unnecessary function argument
Merge tag 'v2.6.32-rc8' into firedtv
firedtv: do not DMA-map stack addresses
firedtv: remove check for interrupting signal
firedtv: reduce memset()s
drivers/media/dvb/firewire/Kconfig | 7 +-
drivers/media/dvb/firewire/Makefile | 1 +
drivers/media/dvb/firewire/firedtv-1394.c | 42 +-
drivers/media/dvb/firewire/firedtv-avc.c | 566 +++++++++++----------
drivers/media/dvb/firewire/firedtv-dvb.c | 16 +-
drivers/media/dvb/firewire/firedtv-fw.c | 376 ++++++++++++++
drivers/media/dvb/firewire/firedtv-rc.c | 2 +
drivers/media/dvb/firewire/firedtv.h | 23 +-
8 files changed, 746 insertions(+), 287 deletions(-)
create mode 100644 drivers/media/dvb/firewire/firedtv-fw.c
And here are the two patches from the "fixes" branch because they
weren't posted to LKML yet:
commit 31769cef2e973544164aa7d0db2e2024660d5e21
Author: Jay Fenlason <fenlason@...hat.com>
Date: Sat Nov 21 00:05:56 2009 +0100
firewire: ohci: pass correct iso xmit timestamps to core
Here is the final set of patches I used to get ffado to work with the
new firewire stack. With these patches, I was able to start ardour
and record from and playback to my PreSonus Inspire1394 from a
(mostly) Fedora 12 system.
Signed-off-by: Jay Fenlason <fenlason@...hat.com>
Until now, firewire-ohci exposed only the transmit cycle of the last
transmitted packet at each isochronous transmit complete event. This
made it impossible for FFADO (FireWire audio drivers in userspace) to
synchronize audio-out streams. The fix is to store the timestamp of
each packet in the iso xmit event. As a bonus, the transfer status is
stored too.
Signed-off-by: Stefan Richter <stefanr@...6.in-berlin.de>
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index c07cfad..94260aa 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1904,15 +1904,30 @@ static int handle_it_packet(struct context *context,
{
struct iso_context *ctx =
container_of(context, struct iso_context, context);
+ int i;
+ struct descriptor *pd;
- if (last->transfer_status == 0)
- /* This descriptor isn't done yet, stop iteration. */
+ for (pd = d; pd <= last; pd++)
+ if (pd->transfer_status)
+ break;
+ if (pd > last)
+ /* Descriptor(s) not done yet, stop iteration */
return 0;
- if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
+ i = ctx->header_length;
+ if (i + 4 < PAGE_SIZE) {
+ /* Present this value as big-endian to match the receive code */
+ *(__be32 *)(ctx->header + i) = cpu_to_be32(
+ ((u32)le16_to_cpu(pd->transfer_status) << 16) |
+ le16_to_cpu(pd->res_count));
+ ctx->header_length += 4;
+ }
+ if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) {
ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count),
- 0, NULL, ctx->base.callback_data);
-
+ ctx->header_length, ctx->header,
+ ctx->base.callback_data);
+ ctx->header_length = 0;
+ }
return 1;
}
commit 5ed1f321a71b8549cc2eea26c94fe7943ed01d31
Author: Jay Fenlason <fenlason@...hat.com>
Date: Tue Nov 17 12:29:17 2009 -0500
firewire: ohci: Make cycleMatch ISO transmission work
Calling the START_ISO ioctl with a nonnegative cycle paramater has
never worked. Last night I got around to figuring out why. Most of
this patch is a big comment explaining why we enable an interrupt
source then don't actually do anything when we get one. As the
comment says, we should do more, but we don't have a way to tell
userspace what happened. . .
Signed-off-by: Jay Fenlason <fenlason@...hat.com>
Signed-off-by: Stefan Richter <stefanr@...6.in-berlin.de> (edited comment)
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 5d52425..c07cfad 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -275,7 +275,7 @@ static void log_irqs(u32 evt)
!(evt & OHCI1394_busReset))
return;
- fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+ fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
evt & OHCI1394_selfIDComplete ? " selfID" : "",
evt & OHCI1394_RQPkt ? " AR_req" : "",
evt & OHCI1394_RSPkt ? " AR_resp" : "",
@@ -286,6 +286,7 @@ static void log_irqs(u32 evt)
evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "",
evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "",
evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "",
+ evt & OHCI1394_cycleInconsistent ? " cycleInconsistent" : "",
evt & OHCI1394_regAccessFail ? " regAccessFail" : "",
evt & OHCI1394_busReset ? " busReset" : "",
evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
@@ -293,6 +294,7 @@ static void log_irqs(u32 evt)
OHCI1394_respTxComplete | OHCI1394_isochRx |
OHCI1394_isochTx | OHCI1394_postedWriteErr |
OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+ OHCI1394_cycleInconsistent |
OHCI1394_regAccessFail | OHCI1394_busReset)
? " ?" : "");
}
@@ -1439,6 +1441,17 @@ static irqreturn_t irq_handler(int irq, void *data)
OHCI1394_LinkControl_cycleMaster);
}
+ if (unlikely(event & OHCI1394_cycleInconsistent)) {
+ /*
+ * We need to clear this event bit in order to make
+ * cycleMatch isochronous I/O work. In theory we should
+ * stop active cycleMatch iso contexts now and restart
+ * them at least two cycles later. (FIXME?)
+ */
+ if (printk_ratelimit())
+ fw_notify("isochronous cycle inconsistent\n");
+ }
+
if (event & OHCI1394_cycle64Seconds) {
cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
if ((cycle_time & 0x80000000) == 0)
@@ -1528,6 +1541,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
OHCI1394_isochRx | OHCI1394_isochTx |
OHCI1394_postedWriteErr | OHCI1394_cycleTooLong |
+ OHCI1394_cycleInconsistent |
OHCI1394_cycle64Seconds | OHCI1394_regAccessFail |
OHCI1394_masterIntEnable);
if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
--
Stefan Richter
-=====-==--= =-== ==---
http://arcgraph.de/sr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists