Message-Id: <20091125170823.5446.16710.sendpatchset@localhost>
Date:	Wed, 25 Nov 2009 18:08:23 +0100
From:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To:	linux-ide@...r.kernel.org
Cc:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
	linux-kernel@...r.kernel.org
Subject: [PATCH 51/86] libata: remove no longer needed pata_qdi driver

From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] libata: remove no longer needed pata_qdi driver

QDI65x0 controllers are fully supported by pata_legacy driver
so remove no longer needed pata_qdi driver.

Leave PATA_QDI config option for compatibility reasons and teach
pata_legacy to preserve the old behavior of pata_qdi driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
 drivers/ata/Kconfig       |    1 
 drivers/ata/Makefile      |    1 
 drivers/ata/pata_legacy.c |    9 +
 drivers/ata/pata_qdi.c    |  366 ----------------------------------------------
 4 files changed, 9 insertions(+), 368 deletions(-)

Index: b/drivers/ata/Kconfig
===================================================================
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -591,6 +591,7 @@ config PATA_PDC_OLD
 config PATA_QDI
 	tristate "QDI VLB PATA support"
 	depends on ISA
+	select PATA_LEGACY
 	help
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
Index: b/drivers/ata/Makefile
===================================================================
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RDC)		+= pata_rdc.o
Index: b/drivers/ata/pata_legacy.c
===================================================================
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -133,7 +133,12 @@ static int ht6560a;		/* HT 6560A on prim
 static int ht6560b;		/* HT 6560A on primary 1, second 2, both 3 */
 static int opti82c611a;		/* Opti82c611A on primary 1, sec 2, both 3 */
 static int opti82c46x;		/* Opti 82c465MV present(pri/sec autodetect) */
-static int qdi;			/* Set to probe QDI controllers */
+/* Set to probe QDI controllers */
+#ifdef PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
 static int winbond;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 static int autospeed;		/* Chip present which snoops speed changes */
@@ -1245,6 +1250,7 @@ MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for legacy ATA");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_qdi");
 
 module_param(probe_all, int, 0);
 module_param(autospeed, int, 0);
@@ -1253,6 +1259,7 @@ module_param(ht6560b, int, 0);
 module_param(opti82c611a, int, 0);
 module_param(opti82c46x, int, 0);
 module_param(qdi, int, 0);
+module_param_named(probe_qdi, qdi, int, 0);
 module_param(pio_mask, int, 0);
 module_param(iordy_mask, int, 0);
 
Index: b/drivers/ata/pata_qdi.c
===================================================================
--- a/drivers/ata/pata_qdi.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- *    pata_qdi.c - QDI VLB ATA controllers
- *	(C) 2006 Red Hat
- *
- * This driver mostly exists as a proof of concept for non PCI devices under
- * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
- * useful.
- *
- * Tuning code written from the documentation at
- * http://www.ryston.cz/petr/vlb/qd6500.html
- * http://www.ryston.cz/petr/vlb/qd6580.html
- *
- * Probe code based on drivers/ide/legacy/qd65xx.c
- * Rewritten from the work of Colten Edwards <pje120@...usask.ca> by
- * Samuel Thibault <samuel.thibault@...-lyon.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.1"
-
-#define NR_HOST 4	/* Two 6580s */
-
-struct qdi_data {
-	unsigned long timing;
-	u8 clock[2];
-	u8 last;
-	int fast;
-	struct platform_device *platform_dev;
-
-};
-
-static struct ata_host *qdi_host[NR_HOST];
-static struct qdi_data qdi_data[NR_HOST];
-static int nr_qdi_host;
-
-#ifdef MODULE
-static int probe_qdi = 1;
-#else
-static int probe_qdi;
-#endif
-
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct qdi_data *qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	qdi->clock[adev->devno] = timing;
-
-	outb(timing, qdi->timing);
-}
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing t;
-	struct qdi_data *qdi = ap->host->private_data;
-	int active, recovery;
-	u8 timing;
-
-	/* Get the timing data in cycles */
-	ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
-	if (qdi->fast) {
-		active = 8 - clamp_val(t.active, 1, 8);
-		recovery = 18 - clamp_val(t.recover, 3, 18);
-	} else {
-		active = 9 - clamp_val(t.active, 2, 9);
-		recovery = 15 - clamp_val(t.recover, 0, 15);
-	}
-	timing = (recovery << 4) | active | 0x08;
-
-	qdi->clock[adev->devno] = timing;
-
-	outb(timing, qdi->timing);
-
-	/* Clear the FIFO */
-	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, (qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- *	qdi_qc_issue		-	command issue
- *	@qc: command pending
- *
- *	Called when the libata layer is about to issue a command. We wrap
- *	this interface so that we can load the correct ATA timings.
- */
-
-static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct ata_device *adev = qc->dev;
-	struct qdi_data *qdi = ap->host->private_data;
-
-	if (qdi->clock[adev->devno] != qdi->last) {
-		if (adev->pio_mode) {
-			qdi->last = qdi->clock[adev->devno];
-			outb(qdi->clock[adev->devno], qdi->timing);
-		}
-	}
-	return ata_sff_qc_issue(qc);
-}
-
-static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
-				  unsigned int buflen, int rw)
-{
-	if (ata_id_has_dword_io(dev->id)) {
-		struct ata_port *ap = dev->link->ap;
-		int slop = buflen & 3;
-
-		if (rw == READ)
-			ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-		else
-			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
-		if (unlikely(slop)) {
-			__le32 pad;
-			if (rw == READ) {
-				pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
-				memcpy(buf + buflen - slop, &pad, slop);
-			} else {
-				memcpy(&pad, buf + buflen - slop, slop);
-				iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
-			}
-			buflen += 4 - slop;
-		}
-	} else
-		buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
-	return buflen;
-}
-
-static struct scsi_host_template qdi_sht = {
-	ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations qdi6500_port_ops = {
-	.inherits	= &ata_sff_port_ops,
-	.qc_issue	= qdi_qc_issue,
-	.sff_data_xfer	= qdi_data_xfer,
-	.cable_detect	= ata_cable_40wire,
-	.set_piomode	= qdi6500_set_piomode,
-};
-
-static struct ata_port_operations qdi6580_port_ops = {
-	.inherits	= &qdi6500_port_ops,
-	.set_piomode	= qdi6580_set_piomode,
-};
-
-/**
- *	qdi_init_one		-	attach a qdi interface
- *	@type: Type to display
- *	@io: I/O port start
- *	@irq: interrupt line
- *	@fast: True if on a > 33Mhz VLB
- *
- *	Register an ISA bus IDE interface. Such interfaces are PIO and we
- *	assume do not support IRQ sharing.
- */
-
-static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
-{
-	unsigned long ctl = io + 0x206;
-	struct platform_device *pdev;
-	struct ata_host *host;
-	struct ata_port *ap;
-	void __iomem *io_addr, *ctl_addr;
-	int ret;
-
-	/*
-	 *	Fill in a probe structure first of all
-	 */
-
-	pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	ret = -ENOMEM;
-	io_addr = devm_ioport_map(&pdev->dev, io, 8);
-	ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1);
-	if (!io_addr || !ctl_addr)
-		goto fail;
-
-	ret = -ENOMEM;
-	host = ata_host_alloc(&pdev->dev, 1);
-	if (!host)
-		goto fail;
-	ap = host->ports[0];
-
-	if (type == 6580) {
-		ap->ops = &qdi6580_port_ops;
-		ap->pio_mask = ATA_PIO4;
-		ap->flags |= ATA_FLAG_SLAVE_POSS;
-	} else {
-		ap->ops = &qdi6500_port_ops;
-		ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
-		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
-	}
-
-	ap->ioaddr.cmd_addr = io_addr;
-	ap->ioaddr.altstatus_addr = ctl_addr;
-	ap->ioaddr.ctl_addr = ctl_addr;
-	ata_sff_std_ports(&ap->ioaddr);
-
-	ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
-
-	/*
-	 *	Hook in a private data structure per channel
-	 */
-	ap->private_data = &qdi_data[nr_qdi_host];
-
-	qdi_data[nr_qdi_host].timing = port;
-	qdi_data[nr_qdi_host].fast = fast;
-	qdi_data[nr_qdi_host].platform_dev = pdev;
-
-	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
-
-	/* activate */
-	ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
-	if (ret)
-		goto fail;
-
-	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
-	return 0;
-
- fail:
-	platform_device_unregister(pdev);
-	return ret;
-}
-
-/**
- *	qdi_init		-	attach qdi interfaces
- *
- *	Attach qdi IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int qdi_init(void)
-{
-	unsigned long flags;
-	static const unsigned long qd_port[2] = { 0x30, 0xB0 };
-	static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
-	static const int ide_irq[2] = { 14, 15 };
-
-	int ct = 0;
-	int i;
-
-	if (probe_qdi == 0)
-		return -ENODEV;
-
-	/*
- 	 *	Check each possible QD65xx base address
-	 */
-
-	for (i = 0; i < 2; i++) {
-		unsigned long port = qd_port[i];
-		u8 r, res;
-
-
-		if (request_region(port, 2, "pata_qdi")) {
-			/* Check for a card */
-			local_irq_save(flags);
-			r = inb_p(port);
-			outb_p(0x19, port);
-			res = inb_p(port);
-			outb_p(r, port);
-			local_irq_restore(flags);
-
-			/* Fail */
-			if (res == 0x19)
-			{
-				release_region(port, 2);
-				continue;
-			}
-
-			/* Passes the presence test */
-			r = inb_p(port + 1);	/* Check port agrees with port set */
-			if ((r & 2) >> 1 != i) {
-				release_region(port, 2);
-				continue;
-			}
-
-			/* Check card type */
-			if ((r & 0xF0) == 0xC0) {
-				/* QD6500: single channel */
-				if (r & 8) {
-					/* Disabled ? */
-					release_region(port, 2);
-					continue;
-				}
-				if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
-					ct++;
-			}
-			if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
-				/* QD6580: dual channel */
-				if (!request_region(port + 2 , 2, "pata_qdi"))
-				{
-					release_region(port, 2);
-					continue;
-				}
-				res = inb(port + 3);
-				if (res & 1) {
-					/* Single channel mode */
-					if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
-						ct++;
-				} else {
-					/* Dual channel mode */
-					if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
-						ct++;
-					if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
-						ct++;
-				}
-			}
-		}
-	}
-	if (ct != 0)
-		return 0;
-	return -ENODEV;
-}
-
-static __exit void qdi_exit(void)
-{
-	int i;
-
-	for (i = 0; i < nr_qdi_host; i++) {
-		ata_host_detach(qdi_host[i]);
-		/* Free the control resource. The 6580 dual channel has the resources
-		 * claimed as a pair of 2 byte resources so we need no special cases...
-		 */
-		release_region(qdi_data[i].timing, 2);
-		platform_device_unregister(qdi_data[i].platform_dev);
-	}
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for qdi ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(qdi_init);
-module_exit(qdi_exit);
-
-module_param(probe_qdi, int, 0);
-
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists