| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20091125171240.5446.31841.sendpatchset@localhost>
Date: Wed, 25 Nov 2009 18:12:40 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 85/86] libata: add ->init_host method
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] libata: add ->init_host method
Add ->init_host method for re-initialization of the controller
in ata_pci_device_resume().
Then teach ata_pci_sff_init_one() and host drivers about it.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ata/libata-core.c | 14 ++++++++++---
drivers/ata/libata-sff.c | 10 ++++++---
drivers/ata/pata_ali.c | 29 ++++++++-------------------
drivers/ata/pata_amd.c | 45 +++++++++++++++++--------------------------
drivers/ata/pata_artop.c | 30 ++++++++--------------------
drivers/ata/pata_cmd640.c | 27 +++++++------------------
drivers/ata/pata_cmd64x.c | 29 +++++++--------------------
drivers/ata/pata_cs5530.c | 31 ++++++-----------------------
drivers/ata/pata_hpt366.c | 30 +++++++++-------------------
drivers/ata/pata_hpt3x3.c | 32 ++++++++++--------------------
drivers/ata/pata_it821x.c | 31 +++++++++++------------------
drivers/ata/pata_ninja32.c | 30 ++++++++++------------------
drivers/ata/pata_ns87415.c | 30 ++++++++--------------------
drivers/ata/pata_pdc2027x.c | 46 ++++++++++++++------------------------------
drivers/ata/pata_sl82c105.c | 29 +++++++--------------------
drivers/ata/sata_sil.c | 33 ++++++++-----------------------
include/linux/libata.h | 14 ++++++++++---
17 files changed, 173 insertions(+), 317 deletions(-)
Index: b/drivers/ata/libata-core.c
===================================================================
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6426,9 +6426,17 @@ int ata_pci_device_resume(struct pci_dev
int rc;
rc = ata_pci_device_do_resume(pdev);
- if (rc == 0)
- ata_host_resume(host);
- return rc;
+ if (rc)
+ return rc;
+
+ if (host->init_host) {
+ rc = host->init_host(&pdev->dev);
+ if (rc)
+ return rc;
+ }
+
+ ata_host_resume(host);
+ return 0;
}
#endif /* CONFIG_PM */
Index: b/drivers/ata/libata-sff.c
===================================================================
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3003,11 +3003,12 @@ out:
EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
/**
- * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ * __ata_pci_sff_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
* @host_priv: host private_data
+ * @init_host: host initialization method (optional)
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
@@ -3027,9 +3028,10 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_h
* RETURNS:
* Zero on success, negative on errno-based value on error.
*/
-int ata_pci_sff_init_one(struct pci_dev *pdev,
+int __ata_pci_sff_init_one(struct pci_dev *pdev,
const struct ata_port_info * const *ppi,
- struct scsi_host_template *sht, void *host_priv)
+ struct scsi_host_template *sht, void *host_priv,
+ int (*init_host)(struct device *dev))
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
@@ -3063,7 +3065,9 @@ int ata_pci_sff_init_one(struct pci_dev
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
goto out;
+
host->private_data = host_priv;
+ host->init_host = init_host;
pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
Index: b/drivers/ata/pata_ali.c
===================================================================
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -424,14 +424,15 @@ static struct ata_port_operations ali_c5
/**
* ali_init_chipset - chip setup function
- * @pdev: PCI device of ATA controller
+ * @dev: device of ATA controller
*
* Perform the setup on the device that must be done both at boot
* and at resume time.
*/
-static void ali_init_chipset(struct pci_dev *pdev)
+static int ali_init_chipset(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
u8 tmp;
struct pci_dev *north;
@@ -478,7 +479,9 @@ static void ali_init_chipset(struct pci_
}
pci_dev_put(north);
ata_pci_bmdma_clear_simplex(pdev);
+ return 0;
}
+
/**
* ali_init_one - discovery callback
* @pdev: PCI device ID
@@ -574,7 +577,7 @@ static int ali_init_one(struct pci_dev *
} else
ppi[0] = &info_c5;
- ali_init_chipset(pdev);
+ ali_init_chipset(&pdev->dev);
if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
@@ -583,23 +586,9 @@ static int ali_init_one(struct pci_dev *
ppi[0] = &info_20_udma;
}
- return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
-}
-
-#ifdef CONFIG_PM
-static int ali_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
- ali_init_chipset(pdev);
- ata_host_resume(host);
- return 0;
+ return __ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL,
+ ali_init_chipset);
}
-#endif
static const struct pci_device_id ali[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
@@ -615,7 +604,7 @@ static struct pci_driver ali_pci_driver
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = ali_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_amd.c
===================================================================
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -455,6 +455,20 @@ static void amd_clear_fifo(struct pci_de
pci_write_config_byte(pdev, 0x41, fifo);
}
+static int amd_fixup(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (pdev->vendor == PCI_VENDOR_ID_AMD) {
+ amd_clear_fifo(pdev);
+ if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
+ pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
+ ata_pci_bmdma_clear_simplex(pdev);
+ }
+
+ return 0;
+}
+
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info[10] = {
@@ -559,10 +573,8 @@ static int amd_init_one(struct pci_dev *
*/
ppi[0] = &info[type];
- if (type < 3)
- ata_pci_bmdma_clear_simplex(pdev);
- if (pdev->vendor == PCI_VENDOR_ID_AMD)
- amd_clear_fifo(pdev);
+ amd_fixup(&pdev->dev);
+
/* Cable detection on Nvidia chips doesn't work too well,
* cache BIOS programmed UDMA mode.
*/
@@ -574,30 +586,9 @@ static int amd_init_one(struct pci_dev *
}
/* And fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
+ return __ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, amd_fixup);
}
-#ifdef CONFIG_PM
-static int amd_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- if (pdev->vendor == PCI_VENDOR_ID_AMD) {
- amd_clear_fifo(pdev);
- if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
- pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
- ata_pci_bmdma_clear_simplex(pdev);
- }
- ata_host_resume(host);
- return 0;
-}
-#endif
-
static const struct pci_device_id amd[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
@@ -630,7 +621,7 @@ static struct pci_driver amd_pci_driver
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = amd_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_artop.c
===================================================================
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -302,8 +302,10 @@ static struct ata_port_operations atp86x
.prereset = atp8xx_prereset,
};
-static void atp8xx_fixup(struct pci_dev *pdev)
+static int atp8xx_fixup(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
if (pdev->device == 0x0005)
/* BIOS may have left us in UDMA, clear it before probe */
pci_write_config_byte(pdev, 0x54, 0);
@@ -328,6 +330,8 @@ static void atp8xx_fixup(struct pci_dev
pci_read_config_byte(pdev, 0x4a, ®);
pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
}
+
+ return 0;
}
/**
@@ -400,28 +404,12 @@ static int artop_init_one (struct pci_de
BUG_ON(ppi[0] == NULL);
- atp8xx_fixup(pdev);
+ atp8xx_fixup(&pdev->dev);
- return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
+ return __ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL,
+ atp8xx_fixup);
}
-#ifdef CONFIG_PM
-static int atp8xx_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- atp8xx_fixup(pdev);
-
- ata_host_resume(host);
- return 0;
-}
-#endif
-
static const struct pci_device_id artop_pci_tbl[] = {
{ PCI_VDEVICE(ARTOP, 0x0005), 0 },
{ PCI_VDEVICE(ARTOP, 0x0006), 1 },
@@ -439,7 +427,7 @@ static struct pci_driver artop_pci_drive
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = atp8xx_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_cmd640.c
===================================================================
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -178,8 +178,9 @@ static struct ata_port_operations cmd640
.port_start = cmd640_port_start,
};
-static void cmd640_hardware_init(struct pci_dev *pdev)
+static int cmd640_hardware_init(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
u8 r;
u8 ctrl;
@@ -205,6 +206,8 @@ static void cmd640_hardware_init(struct
pci_read_config_byte(pdev, ARTIM23, &ctrl);
ctrl |= 0x0C;
pci_write_config_byte(pdev, ARTIM23, ctrl);
+
+ return 0;
}
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -221,25 +224,11 @@ static int cmd640_init_one(struct pci_de
if (rc)
return rc;
- cmd640_hardware_init(pdev);
-
- return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
-}
-
-#ifdef CONFIG_PM
-static int cmd640_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
+ cmd640_hardware_init(&pdev->dev);
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
- cmd640_hardware_init(pdev);
- ata_host_resume(host);
- return 0;
+ return __ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL,
+ cmd640_hardware_init);
}
-#endif
static const struct pci_device_id cmd640[] = {
{ PCI_VDEVICE(CMD, 0x640), 0 },
@@ -253,7 +242,7 @@ static struct pci_driver cmd640_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = cmd640_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_cmd64x.c
===================================================================
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -328,8 +328,9 @@ static struct ata_port_operations cmd648
.cable_detect = cmd648_cable_detect,
};
-static void cmd64x_fixup(struct pci_dev *pdev)
+static int cmd64x_fixup(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
u8 mrdmode;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -342,6 +343,8 @@ static void cmd64x_fixup(struct pci_dev
#ifdef CONFIG_PPC
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
+
+ return 0;
}
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -411,27 +414,11 @@ static int cmd64x_init_one(struct pci_de
ppi[0] = &cmd_info[3];
}
- cmd64x_fixup(pdev);
-
- return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
-}
-
-#ifdef CONFIG_PM
-static int cmd64x_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
+ cmd64x_fixup(&pdev->dev);
- cmd64x_fixup(pdev);
-
- ata_host_resume(host);
- return 0;
+ return __ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL,
+ cmd64x_fixup);
}
-#endif
static const struct pci_device_id cmd64x[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
@@ -449,7 +436,7 @@ static struct pci_driver cmd64x_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = cmd64x_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_cs5530.c
===================================================================
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -198,12 +198,13 @@ static int cs5530_is_palmax(void)
/**
* cs5530_init_chip - Chipset init
+ * @gendev: device
*
* Perform the chip initialisation work that is shared between both
* setup and resume paths
*/
-static int cs5530_init_chip(void)
+static int cs5530_init_chip(struct device *gendev)
{
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
@@ -281,7 +282,7 @@ fail_put:
pci_dev_put(master_0);
if (cs5530_0)
pci_dev_put(cs5530_0);
- return -ENODEV;
+ return -EIO;
}
/**
@@ -317,35 +318,17 @@ static int cs5530_init_one(struct pci_de
return rc;
/* Chip initialisation */
- if (cs5530_init_chip())
+ if (cs5530_init_chip(NULL))
return -ENODEV;
if (cs5530_is_palmax())
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
+ return __ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL,
+ cs5530_init_chip);
}
-#ifdef CONFIG_PM
-static int cs5530_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- /* If we fail on resume we are doomed */
- if (cs5530_init_chip())
- return -EIO;
-
- ata_host_resume(host);
- return 0;
-}
-#endif /* CONFIG_PM */
-
static const struct pci_device_id cs5530[] = {
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
@@ -359,7 +342,7 @@ static struct pci_driver cs5530_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = cs5530_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_hpt366.c
===================================================================
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -292,15 +292,17 @@ static struct ata_port_operations hpt366
/**
* hpt36x_init_chipset - common chip setup
- * @dev: PCI device
+ * @gendev: device
*
* Perform the chip setup work that must be done at both init and
* resume time
*/
-static void hpt36x_init_chipset(struct pci_dev *dev)
+static int hpt36x_init_chipset(struct device *gendev)
{
+ struct pci_dev *dev = to_pci_dev(gendev);
u8 drive_fast;
+
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
@@ -309,6 +311,8 @@ static void hpt36x_init_chipset(struct p
pci_read_config_byte(dev, 0x51, &drive_fast);
if (drive_fast & 0x80)
pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+
+ return 0;
}
/**
@@ -360,7 +364,7 @@ static int hpt36x_init_one(struct pci_de
if (class_rev > 2)
return -ENODEV;
- hpt36x_init_chipset(dev);
+ hpt36x_init_chipset(&dev->dev);
pci_read_config_dword(dev, 0x40, ®1);
@@ -378,23 +382,9 @@ static int hpt36x_init_one(struct pci_de
break;
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
-}
-
-#ifdef CONFIG_PM
-static int hpt36x_reinit_one(struct pci_dev *dev)
-{
- struct ata_host *host = dev_get_drvdata(&dev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(dev);
- if (rc)
- return rc;
- hpt36x_init_chipset(dev);
- ata_host_resume(host);
- return 0;
+ return __ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv,
+ hpt36x_init_chipset);
}
-#endif
static const struct pci_device_id hpt36x[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
@@ -408,7 +398,7 @@ static struct pci_driver hpt36x_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = hpt36x_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_hpt3x3.c
===================================================================
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -156,14 +156,16 @@ static struct ata_port_operations hpt3x3
/**
* hpt3x3_init_chipset - chip setup
- * @dev: PCI device
+ * @gendev: device
*
* Perform the setup required at boot and on resume.
*/
-static void hpt3x3_init_chipset(struct pci_dev *dev)
+static int hpt3x3_init_chipset(struct device *gendev)
{
+ struct pci_dev *dev = to_pci_dev(gendev);
u16 cmd;
+
/* Initialize the board */
pci_write_config_word(dev, 0x80, 0x00);
/* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
@@ -172,6 +174,8 @@ static void hpt3x3_init_chipset(struct p
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
else
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
+
+ return 0;
}
/**
@@ -204,7 +208,7 @@ static int hpt3x3_init_one(struct pci_de
int i, rc;
void __iomem *base;
- hpt3x3_init_chipset(pdev);
+ hpt3x3_init_chipset(&pdev->dev);
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -212,6 +216,9 @@ static int hpt3x3_init_one(struct pci_de
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
if (!host)
return -ENOMEM;
+
+ host->init_host = hpt3x3_init_chipset;
+
/* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
@@ -252,23 +259,6 @@ static int hpt3x3_init_one(struct pci_de
IRQF_SHARED, &hpt3x3_sht);
}
-#ifdef CONFIG_PM
-static int hpt3x3_reinit_one(struct pci_dev *dev)
-{
- struct ata_host *host = dev_get_drvdata(&dev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(dev);
- if (rc)
- return rc;
-
- hpt3x3_init_chipset(dev);
-
- ata_host_resume(host);
- return 0;
-}
-#endif
-
static const struct pci_device_id hpt3x3[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
@@ -282,7 +272,7 @@ static struct pci_driver hpt3x3_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = hpt3x3_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_it821x.c
===================================================================
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -868,6 +868,15 @@ static void it821x_disable_raid(struct p
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20);
}
+static int it821x_fixup(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (pdev->vendor != PCI_VENDOR_ID_RDC && it8212_noraid)
+ it821x_disable_raid(pdev);
+
+ return 0;
+}
static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -932,26 +941,10 @@ static int it821x_init_one(struct pci_de
else
ppi[0] = &info_smart;
}
- return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
+ return __ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL,
+ it821x_fixup);
}
-#ifdef CONFIG_PM
-static int it821x_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
- /* Resume - turn raid back off if need be */
- if (it8212_noraid)
- it821x_disable_raid(pdev);
- ata_host_resume(host);
- return rc;
-}
-#endif
-
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
@@ -967,7 +960,7 @@ static struct pci_driver it821x_pci_driv
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = it821x_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_ninja32.c
===================================================================
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -89,8 +89,11 @@ static struct ata_port_operations ninja3
.sff_data_xfer = ata_sff_data_xfer32
};
-static void ninja32_program(void __iomem *base)
+static int ninja32_program(struct device *dev)
{
+ struct ata_host *host = dev_get_drvdata(dev);
+ void __iomem *base = host->iomap[0];
+
iowrite8(0x05, base + 0x01); /* Enable interrupt lines */
iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */
iowrite8(0x01, base + 0x03); /* Unknown */
@@ -98,6 +101,8 @@ static void ninja32_program(void __iomem
iowrite8(0x8f, base + 0x05); /* Unknown */
iowrite8(0xa4, base + 0x1c); /* Unknown */
iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */
+
+ return 0;
}
static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@@ -110,6 +115,8 @@ static int ninja32_init_one(struct pci_d
host = ata_host_alloc(&dev->dev, 1);
if (!host)
return -ENOMEM;
+
+ host->init_host = ninja32_program;
ap = host->ports[0];
/* Set up the PCI device */
@@ -147,28 +154,13 @@ static int ninja32_init_one(struct pci_d
ata_sff_std_ports(&ap->ioaddr);
ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- ninja32_program(base);
+ ninja32_program(&dev->dev);
+
/* FIXME: Should we disable them at remove ? */
return ata_host_activate(host, dev->irq, ata_sff_interrupt,
IRQF_SHARED, &ninja32_sht);
}
-#ifdef CONFIG_PM
-
-static int ninja32_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
- ninja32_program(host->iomap[0]);
- ata_host_resume(host);
- return 0;
-}
-#endif
-
static const struct pci_device_id ninja32[] = {
{ 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -186,7 +178,7 @@ static struct pci_driver ninja32_pci_dri
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = ninja32_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_ns87415.c
===================================================================
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -325,12 +325,16 @@ static struct scsi_host_template ns87415
ATA_BMDMA_SHT(DRV_NAME),
};
-static void ns87415_fixup(struct pci_dev *pdev)
+static int ns87415_fixup(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
/* Select 512 byte sectors */
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */
pci_write_config_byte(pdev, 0x54, 0xB7);
+
+ return 0;
}
/**
@@ -378,9 +382,10 @@ static int ns87415_init_one (struct pci_
if (rc)
return rc;
- ns87415_fixup(pdev);
+ ns87415_fixup(&pdev->dev);
- return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
+ return __ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL,
+ ns87415_fixup);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
@@ -389,23 +394,6 @@ static const struct pci_device_id ns8741
{ } /* terminate list */
};
-#ifdef CONFIG_PM
-static int ns87415_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- ns87415_fixup(pdev);
-
- ata_host_resume(host);
- return 0;
-}
-#endif
-
static struct pci_driver ns87415_pci_driver = {
.name = DRV_NAME,
.id_table = ns87415_pci_tbl,
@@ -413,7 +401,7 @@ static struct pci_driver ns87415_pci_dri
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = ns87415_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/pata_pdc2027x.c
===================================================================
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,7 +63,6 @@ enum {
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static int pdc2027x_reinit_one(struct pci_dev *pdev);
static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -129,7 +128,7 @@ static struct pci_driver pdc2027x_pci_dr
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = pdc2027x_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
@@ -647,13 +646,21 @@ static long pdc_detect_pll_input_clock(s
/**
* pdc_hardware_init - Initialize the hardware.
- * @host: target ATA host
- * @board_idx: board identifier
+ * @dev: device
*/
-static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
+static int pdc_hardware_init(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ unsigned int board_idx;
long pll_clock;
+ if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+ pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+ board_idx = PDC_UDMA_100;
+ else
+ board_idx = PDC_UDMA_133;
+
/*
* Detect PLL input clock rate.
* On some system, where PCI bus is running at non-standard clock rate.
@@ -722,6 +729,8 @@ static int __devinit pdc2027x_init_one(s
if (!host)
return -ENOMEM;
+ host->init_host = pdc_hardware_init;
+
/* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
@@ -755,7 +764,7 @@ static int __devinit pdc2027x_init_one(s
//pci_enable_intx(pdev);
/* initialize adapter */
- if (pdc_hardware_init(host, board_idx) != 0)
+ if (pdc_hardware_init(&pdev->dev))
return -EIO;
pci_set_master(pdev);
@@ -763,31 +772,6 @@ static int __devinit pdc2027x_init_one(s
IRQF_SHARED, &pdc2027x_sht);
}
-#ifdef CONFIG_PM
-static int pdc2027x_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- unsigned int board_idx;
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
- pdev->device == PCI_DEVICE_ID_PROMISE_20270)
- board_idx = PDC_UDMA_100;
- else
- board_idx = PDC_UDMA_133;
-
- if (pdc_hardware_init(host, board_idx))
- return -EIO;
-
- ata_host_resume(host);
- return 0;
-}
-#endif
-
/**
* pdc2027x_init - Called after this module is loaded into the kernel.
*/
Index: b/drivers/ata/pata_sl82c105.c
===================================================================
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -279,13 +279,16 @@ static int sl82c105_bridge_revision(stru
return bridge->revision;
}
-static void sl82c105_fixup(struct pci_dev *pdev)
+static int sl82c105_fixup(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
u32 val;
pci_read_config_dword(pdev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(pdev, 0x40, val);
+
+ return 0;
}
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@@ -320,27 +323,11 @@ static int sl82c105_init_one(struct pci_
else
ppi[0] = &info_dma;
- sl82c105_fixup(dev);
-
- return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
-}
-
-#ifdef CONFIG_PM
-static int sl82c105_reinit_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
+ sl82c105_fixup(&dev->dev);
- sl82c105_fixup(pdev);
-
- ata_host_resume(host);
- return 0;
+ return __ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL,
+ sl82c105_fixup);
}
-#endif
static const struct pci_device_id sl82c105[] = {
{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
@@ -355,7 +342,7 @@ static struct pci_driver sl82c105_pci_dr
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = sl82c105_reinit_one,
+ .resume = ata_pci_device_resume,
#endif
};
Index: b/drivers/ata/sata_sil.c
===================================================================
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -114,9 +114,6 @@ enum {
};
static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-#ifdef CONFIG_PM
-static int sil_pci_device_resume(struct pci_dev *pdev);
-#endif
static void sil_dev_config(struct ata_device *dev);
static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
@@ -169,7 +166,7 @@ static struct pci_driver sil_pci_driver
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
- .resume = sil_pci_device_resume,
+ .resume = ata_pci_device_resume,
#endif
};
@@ -663,9 +660,10 @@ static void sil_dev_config(struct ata_de
}
}
-static void sil_init_controller(struct ata_host *host)
+static int sil_init_controller(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
u8 cls;
u32 tmp;
@@ -707,6 +705,8 @@ static void sil_init_controller(struct a
writel(tmp | SIL_INTR_STEERING,
mmio_base + sil_port[2].bmdma);
}
+
+ return 0;
}
static bool sil_broken_system_poweroff(struct pci_dev *pdev)
@@ -765,6 +765,8 @@ static int sil_init_one(struct pci_dev *
if (!host)
return -ENOMEM;
+ host->init_host = sil_init_controller;
+
/* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
@@ -802,30 +804,13 @@ static int sil_init_one(struct pci_dev *
}
/* initialize and activate */
- sil_init_controller(host);
+ sil_init_controller(&pdev->dev);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
&sil_sht);
}
-#ifdef CONFIG_PM
-static int sil_pci_device_resume(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- int rc;
-
- rc = ata_pci_device_do_resume(pdev);
- if (rc)
- return rc;
-
- sil_init_controller(host);
- ata_host_resume(host);
-
- return 0;
-}
-#endif
-
static int __init sil_init(void)
{
return pci_register_driver(&sil_pci_driver);
Index: b/include/linux/libata.h
===================================================================
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -526,6 +526,7 @@ struct ata_host {
unsigned int n_ports;
void *private_data;
struct ata_port_operations *ops;
+ int (*init_host)(struct device *dev);
unsigned long flags;
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
@@ -1637,9 +1638,16 @@ extern int ata_pci_sff_prepare_host(stru
extern int ata_pci_sff_activate_host(struct ata_host *host,
irq_handler_t irq_handler,
struct scsi_host_template *sht);
-extern int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht, void *host_priv);
+extern int __ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int (*init_host)(struct device *dev));
+static inline int ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv)
+{
+ return __ata_pci_sff_init_one(pdev, ppi, sht, host_priv, NULL);
+}
#endif /* CONFIG_PCI */
/**
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists