| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 25 Nov 2009 18:12:25 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 83/86] pata_via: add via_fixup()
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] pata_via: add via_fixup()
Factor out common code from via_[re]init_one() to via_fixup().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ata/pata_via.c | 53 +++++++++++++++++++++----------------------------
1 file changed, 23 insertions(+), 30 deletions(-)
Index: b/drivers/ata/pata_via.c
===================================================================
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -468,6 +468,27 @@ static void via_config_fifo(struct pci_d
}
}
+static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config)
+{
+ u32 timing;
+
+ /* Initialise the FIFO for the enabled channels. */
+ via_config_fifo(pdev, config->flags);
+
+ if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
+ /* The 66 MHz devices require we enable the clock */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing |= 0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+ if (config->flags & VIA_BAD_CLK66) {
+ /* Disable the 66MHz clock on problem devices */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing &= ~0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+}
+
/**
* via_init_one - discovery callback
* @pdev: PCI device
@@ -530,7 +551,6 @@ static int via_init_one(struct pci_dev *
const struct via_isa_bridge *config;
static int printed_version;
u8 enable;
- u32 timing;
unsigned long flags = id->driver_data;
int rc;
@@ -568,9 +588,6 @@ static int via_init_one(struct pci_dev *
return -ENODEV;
}
- /* Initialise the FIFO for the enabled channels. */
- via_config_fifo(pdev, config->flags);
-
/* Clock set up */
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
@@ -584,10 +601,6 @@ static int via_init_one(struct pci_dev *
break;
case VIA_UDMA_66:
ppi[0] = &via_udma66_info;
- /* The 66 MHz devices require we enable the clock */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing |= 0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
break;
case VIA_UDMA_100:
ppi[0] = &via_udma100_info;
@@ -600,12 +613,7 @@ static int via_init_one(struct pci_dev *
return -ENODEV;
}
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, config);
/* We have established the device type, now fire it up */
return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
@@ -624,29 +632,14 @@ static int via_init_one(struct pci_dev *
static int via_reinit_one(struct pci_dev *pdev)
{
- u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- const struct via_isa_bridge *config = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- via_config_fifo(pdev, config->flags);
-
- if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
- /* The 66 MHz devices require we enable the clock */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing |= 0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, host->private_data);
ata_host_resume(host);
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists