| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 29 Nov 2009 13:52:16 -0200 From: Bruno Barberi Gnecco <brunobg@...il.com> To: Michael Breuer <mbreuer@...jas.com> CC: linux-kernel@...r.kernel.org, brunobg@...il.com Subject: Re: PROBLEM: BUG: Constant freezes and kernel panics on a quad core (with dumps) > I'd think this is a hardware problem. Some things that have caused me > similar grief in the past: It is possible, but I can rule most of them out. I think it's unlikely. > Bad IDE cable > Bad SATA cable Ruled out. Only SATA drives. I used two different HDs (separatedly) with different cables, and the live CD. It's not the cables or the drives. > Bad power supply > Bad motherboard Both are brand new, but of course that doesn't rule them out. Regarding the PS, I have checked voltages with a multimeter and they are more than fine, and the wattage is enough for the system, so it'd have to be a very weird transient glitch that affects only memory access. See also below. Any ideas to rule the MB out, other than "get a new one"? > Bad memory (memtest doesn't necessarily access things the same way as > the kernel) Ruled out. I replaced with a 2GB DDR2, still got the bug: "BUG: Bad page map in process". > Bad cards (pci, agp, whatever) Ruled out. The only card is the video card. I replaced it with a very old PCI board and still got error. This also pretty much rules out that the PS is underpowered, since I powered only the MB and the HD. Could it be one of the onboard things? I disabled everything but the LAN, and still got it. > Any of the above with loose connections I already reconnected everything twice. Could still be a loose connection of one of the wires in the connector, but it's very very unlikely to give such a specific error on memory access. > And did I mention bad power supply? Yes you did, and I'll try to get another one to be sure, but it could still be a software bug too. I tried to install an old Win2K I had here. It doesn't handle the big HD well and ends up not booting after installation (it can't partition it, also), but it didn't freeze (even though it formatted the disk and copied the files, which was not slow). So +1 to being a kernel bug. The most common error message I get is: "BUG: unable to handle kernel NULL pointer dereference." Any other suggestions? Any other information which could help? Thanks for the answer, > Bruno Barberi Gnecco wrote: >> Summary: a PC I'm testing is unstable and freezing often. Freezes >> occur in various situations, including under no load (not even the X >> running). Dumps are provided below. >> >> Sometimes it's a plain freeze, sometimes a kernel panic with the >> blinking leds and a dump. It seems the problem is related to memory, >> most of the messages are related to null memory references (see more >> below). System ran once for several hours before freezing. >> >> * System specification: Intel Core 2 Quad Q9550 @ 2.83GHz, 4GB DDR3, >> Motherboard Asus P5QC. No overclocking. >> >> * Tested under the following kernels/distros, all had the bug. Since I >> used their vanilla kernels, I'm not posting a copy of the .configs: >> >> - 2.6.27.7-smp (slackware 12.2 hugesmp kernel; distro heavily >> updated), 32 bits >> - 2.6.29.6-smp (slackware 13.0 hugesmp kernel; fresh install), both 32 >> and 64 bits >> - 2.6.29.6-nosmp (slackware 13.0 huge kernel; fresh install), both 32 >> and 64 bits >> - 2.6.31-14-generic SMP (ubuntu 9.10 netbook remix live cd), 32 bits >> >> * Here are some screen dumps (sorry, no serial cable for a text dump). >> >> http://ultraxs.com/share-208E_4B118ED2.html >> http://ultraxs.com/share-2FDD_4B118ED2.html >> http://ultraxs.com/share-D0D9_4B118ED2.html >> http://ultraxs.com/share-498F_4B118ED2.html >> http://ultraxs.com/share-0AD8_4B118ED2.html >> >> * Turning off ACPI and APIC, either through the BIOS or through kernel >> parameters did not help, even when only one processor is recognized. >> >> * I ran memtest and no errors were detected. I completed the tests >> three times. >> >> * Nothing is ever output to the logs. >> >> * A sure way to get a freeze is to recompile the kernel, but the >> freeze does not happen at the same point of the compilation and I >> can't even say if the compilation triggers the bug or if it's just a >> coincidence and the compilation just takes long enough for it to happen. >> >> * Any other information, testing or debugging you need, just ask. I >> just can't use the PC, it usually freezes within minutes. Please CC >> any replies to me [brunobg at gmail]. Thank you very much for any help. >> -- >> To unsubscribe from this list: send the line "unsubscribe >> linux-kernel" in >> the body of a message to majordomo@...r.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > -- Bruno Barberi Gnecco <brunobg_at_users.sourceforge.net> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists