| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200911291640.21673.rjw@sisk.pl>
Date: Sun, 29 Nov 2009 16:40:21 +0100
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: pm list <linux-pm@...ts.linux-foundation.org>
Cc: LKML <linux-kernel@...r.kernel.org>,
Linux PCI <linux-pci@...r.kernel.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Alan Stern <stern@...land.harvard.edu>,
Jesse Barnes <jbarnes@...tuousgeek.org>,
Matthew Garrett <mjg59@...f.ucam.org>,
Oliver Neukum <oliver@...kum.org>,
Shaohua Li <shaohua.li@...el.com>,
Bjorn Helgaas <bjorn.helgaas@...com>,
Francois Romieu <romieu@...zoreil.com>,
Len Brown <lenb@...nel.org>
Subject: [RFC][PATCH 8/12] ACPI: Remove old GPE API and transition code entirely to new one
From: Matthew Garrett <mjg@...hat.com>
Remove the old GPE type handling entirely, which gets rid of various quirks
like the implicit disabling with GPE type setting. This requires a small
amount of rework in order to ensure that non-wake GPEs are enabled by
default to preserve existing behaviour.
Signed-off-by: Matthew Garrett <mjg@...hat.com>
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
drivers/acpi/acpica/acevents.h | 6 +--
drivers/acpi/acpica/acevents.h | 6 -
drivers/acpi/acpica/evgpe.c | 147 +++--------------------------------------
drivers/acpi/acpica/evgpeblk.c | 69 ++++++-------------
drivers/acpi/acpica/evxface.c | 14 ---
drivers/acpi/acpica/evxfevnt.c | 48 -------------
drivers/acpi/button.c | 5 -
drivers/acpi/ec.c | 2
drivers/acpi/wakeup.c | 55 ++-------------
include/acpi/actypes.h | 32 ++------
9 files changed, 59 insertions(+), 319 deletions(-)
Index: linux-2.6/drivers/acpi/acpica/acevents.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/acevents.h
+++ linux-2.6/drivers/acpi/acpica/acevents.h
@@ -76,8 +76,7 @@ acpi_ev_queue_notify_request(struct acpi
* evgpe - GPE handling and dispatch
*/
acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
- u8 type);
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
acpi_status
acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
@@ -122,9 +121,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_eve
u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type);
-
-acpi_status
acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info);
acpi_status acpi_ev_gpe_initialize(void);
Index: linux-2.6/drivers/acpi/acpica/evgpe.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evgpe.c
+++ linux-2.6/drivers/acpi/acpica/evgpe.c
@@ -54,54 +54,9 @@ static void ACPI_SYSTEM_XFACE acpi_ev_as
/*******************************************************************************
*
- * FUNCTION: acpi_ev_set_gpe_type
- *
- * PARAMETERS: gpe_event_info - GPE to set
- * Type - New type
- *
- * RETURN: Status
- *
- * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_set_gpe_type);
-
- /* Validate type and update register enable masks */
-
- switch (type) {
- case ACPI_GPE_TYPE_WAKE:
- case ACPI_GPE_TYPE_RUNTIME:
- case ACPI_GPE_TYPE_WAKE_RUN:
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Disable the GPE if currently enabled */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
-
- /* Clear the type bits and insert the new Type */
-
- gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK;
- gpe_event_info->flags |= type;
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_update_gpe_enable_masks
*
* PARAMETERS: gpe_event_info - GPE to update
- * Type - What to do: ACPI_GPE_DISABLE or
- * ACPI_GPE_ENABLE
*
* RETURN: Status
*
@@ -110,8 +65,7 @@ acpi_ev_set_gpe_type(struct acpi_gpe_eve
******************************************************************************/
acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
- u8 type)
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
{
struct acpi_gpe_register_info *gpe_register_info;
u8 register_bit;
@@ -127,37 +81,13 @@ acpi_ev_update_gpe_enable_masks(struct a
(1 <<
(gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
- /* 1) Disable case. Simply clear all enable bits */
-
- if (type == ACPI_GPE_DISABLE) {
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
- register_bit);
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- return_ACPI_STATUS(AE_OK);
- }
-
- /* 2) Enable case. Set/Clear the appropriate enable bits */
-
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
- ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
+ ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit);
+ ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
- case ACPI_GPE_TYPE_RUNTIME:
- ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
- register_bit);
+ if (gpe_event_info->runtime_count)
ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
-
- case ACPI_GPE_TYPE_WAKE_RUN:
+ if (gpe_event_info->wakeup_count)
ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
- ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
return_ACPI_STATUS(AE_OK);
}
@@ -186,47 +116,21 @@ acpi_ev_enable_gpe(struct acpi_gpe_event
/* Make sure HW enable masks are updated */
- status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE);
+ status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Mark wake-enabled or HW enable, or both */
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
-
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
- break;
-
- case ACPI_GPE_TYPE_WAKE_RUN:
-
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
- /*lint -fallthrough */
-
- case ACPI_GPE_TYPE_RUNTIME:
-
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
-
- if (write_to_hardware) {
-
- /* Clear the GPE (of stale events), then enable it */
-
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Enable the requested runtime GPE */
-
- status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
- }
- break;
+ if (gpe_event_info->runtime_count && write_to_hardware) {
+ /* Clear the GPE (of stale events), then enable it */
+ status = acpi_hw_clear_gpe(gpe_event_info);
+ if (ACPI_FAILURE(status))
+ return_ACPI_STATUS(status);
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ /* Enable the requested runtime GPE */
+ status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
}
return_ACPI_STATUS(AE_OK);
@@ -253,34 +157,11 @@ acpi_status acpi_ev_disable_gpe(struct a
/* Make sure HW enable masks are updated */
status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE);
+ acpi_ev_update_gpe_enable_masks(gpe_event_info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- /* Clear the appropriate enabled flags for this GPE */
-
- switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
- case ACPI_GPE_TYPE_WAKE:
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
- break;
-
- case ACPI_GPE_TYPE_WAKE_RUN:
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
- /* fallthrough */
-
- case ACPI_GPE_TYPE_RUNTIME:
-
- /* Disable the requested runtime GPE */
-
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
- break;
-
- default:
- break;
- }
-
/*
* Even if we don't know the GPE type, make sure that we always
* disable it. low_disable_gpe will just clear the enable bit for this
Index: linux-2.6/drivers/acpi/acpica/evgpeblk.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evgpeblk.c
+++ linux-2.6/drivers/acpi/acpica/evgpeblk.c
@@ -325,22 +325,16 @@ acpi_ev_save_method_info(acpi_handle obj
/*
* Now we can add this information to the gpe_event_info block for use
- * during dispatch of this GPE. Default type is RUNTIME, although this may
- * change when the _PRW methods are executed later.
+ * during dispatch of this GPE.
*/
gpe_event_info =
&gpe_block->event_info[gpe_number - gpe_block->block_base_number];
- gpe_event_info->flags = (u8)
- (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
+ gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD);
gpe_event_info->dispatch.method_node =
(struct acpi_namespace_node *)obj_handle;
- /* Update enable mask, but don't enable the HW GPE as of yet */
-
- status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
-
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Registered GPE method %s as GPE number 0x%.2X\n",
name, gpe_number));
@@ -454,20 +448,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle ob
gpe_block->
block_base_number];
- /* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
-
- gpe_event_info->flags &=
- ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
-
- status =
- acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- status =
- acpi_ev_update_gpe_enable_masks(gpe_event_info,
- ACPI_GPE_DISABLE);
+ gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
}
cleanup:
@@ -1027,33 +1008,35 @@ acpi_ev_initialize_gpe_block(struct acpi
}
/*
- * Enable all GPEs in this block that have these attributes:
- * 1) are "runtime" or "run/wake" GPEs, and
- * 2) have a corresponding _Lxx or _Exx method
- *
- * Any other GPEs within this block must be enabled via the
- * acpi_enable_gpe() external interface.
+ * Enable all GPEs that have a corresponding method and aren't
+ * capable of generating wakeups. Any other GPEs within this block
+ * must be enabled via the acpi_ref_runtime_gpe interface.
*/
wake_gpe_count = 0;
gpe_enabled_count = 0;
for (i = 0; i < gpe_block->register_count; i++) {
for (j = 0; j < 8; j++) {
+ int gpe_number = i * ACPI_GPE_REGISTER_WIDTH + j;
/* Get the info block for this particular GPE */
- gpe_event_info = &gpe_block->event_info[((acpi_size) i *
- ACPI_GPE_REGISTER_WIDTH)
- + j];
-
- if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
- ACPI_GPE_DISPATCH_METHOD) &&
- (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
- gpe_enabled_count++;
- }
+ gpe_event_info = &gpe_block->event_info[(acpi_size)
+ gpe_number];
- if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
+ if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
wake_gpe_count++;
+ continue;
+ }
+
+ if (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) {
+ gpe_enabled_count++;
+ if (gpe_device == acpi_gbl_fadt_gpe_device)
+ status = acpi_ref_runtime_gpe(NULL,
+ gpe_number);
+ else
+ status = acpi_ref_runtime_gpe(gpe_device,
+ gpe_number);
}
}
}
@@ -1062,15 +1045,7 @@ acpi_ev_initialize_gpe_block(struct acpi
"Found %u Wake, Enabled %u Runtime GPEs in this block\n",
wake_gpe_count, gpe_enabled_count));
- /* Enable all valid runtime GPEs found above */
-
- status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block, NULL);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not enable GPEs in GpeBlock %p",
- gpe_block));
- }
-
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
Index: linux-2.6/drivers/acpi/acpica/evxface.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxface.c
+++ linux-2.6/drivers/acpi/acpica/evxface.c
@@ -617,13 +617,6 @@ acpi_install_gpe_handler(acpi_handle gpe
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
- /* Disable the GPE before installing the handler */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
-
/* Install the handler */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
@@ -707,13 +700,6 @@ acpi_remove_gpe_handler(acpi_handle gpe_
goto unlock_and_exit;
}
- /* Disable the GPE before removing the handler */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
- }
-
/* Make sure all deferred tasks are completed */
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
Index: linux-2.6/drivers/acpi/acpica/evxfevnt.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxfevnt.c
+++ linux-2.6/drivers/acpi/acpica/evxfevnt.c
@@ -311,8 +311,7 @@ acpi_status acpi_ref_wakeup_gpe(acpi_han
}
if (++gpe_event_info->wakeup_count == 1)
- acpi_ev_update_gpe_enable_masks(gpe_event_info,
- ACPI_GPE_ENABLE);
+ acpi_ev_update_gpe_enable_masks(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
@@ -351,8 +350,7 @@ acpi_status acpi_unref_wakeup_gpe(acpi_h
}
if (--gpe_event_info->wakeup_count == 0)
- acpi_ev_update_gpe_enable_masks(gpe_event_info,
- ACPI_GPE_DISABLE);
+ acpi_ev_update_gpe_enable_masks(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
@@ -362,48 +360,6 @@ ACPI_EXPORT_SYMBOL(acpi_unref_wakeup_gpe
/*******************************************************************************
*
- * FUNCTION: acpi_set_gpe_type
- *
- * PARAMETERS: gpe_device - Parent GPE Device
- * gpe_number - GPE level within the GPE block
- * Type - New GPE type
- *
- * RETURN: Status
- *
- * DESCRIPTION: Set the type of an individual GPE
- *
- ******************************************************************************/
-acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type)
-{
- acpi_status status = AE_OK;
- struct acpi_gpe_event_info *gpe_event_info;
-
- ACPI_FUNCTION_TRACE(acpi_set_gpe_type);
-
- /* Ensure that we have a valid GPE number */
-
- gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Set the new type (will disable GPE if currently enabled) */
-
- status = acpi_ev_set_gpe_type(gpe_event_info, type);
-
- unlock_and_exit:
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
-
-/*******************************************************************************
- *
* FUNCTION: acpi_enable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device
Index: linux-2.6/drivers/acpi/button.c
===================================================================
--- linux-2.6.orig/drivers/acpi/button.c
+++ linux-2.6/drivers/acpi/button.c
@@ -415,11 +415,6 @@ static int acpi_button_add(struct acpi_d
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
- acpi_set_gpe_type(device->wakeup.gpe_device,
- device->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
- acpi_enable_gpe(device->wakeup.gpe_device,
- device->wakeup.gpe_number);
acpi_ref_runtime_gpe(device->wakeup.gpe_device,
device->wakeup.gpe_number);
acpi_ref_wakeup_gpe(device->wakeup.gpe_device,
Index: linux-2.6/drivers/acpi/ec.c
===================================================================
--- linux-2.6.orig/drivers/acpi/ec.c
+++ linux-2.6/drivers/acpi/ec.c
@@ -754,7 +754,7 @@ static int ec_install_handlers(struct ac
&acpi_ec_gpe_handler, ec);
if (ACPI_FAILURE(status))
return -ENODEV;
- acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+
acpi_ref_runtime_gpe(NULL, ec->gpe);
status = acpi_install_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC,
Index: linux-2.6/drivers/acpi/wakeup.c
===================================================================
--- linux-2.6.orig/drivers/acpi/wakeup.c
+++ linux-2.6/drivers/acpi/wakeup.c
@@ -62,25 +62,12 @@ void acpi_enable_wakeup_device(u8 sleep_
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
- if (!dev->wakeup.flags.valid)
+ if (!dev->wakeup.flags.valid ||
+ !dev->wakeup.prepare_count ||
+ !dev->wakeup.state.enabled ||
+ (sleep_state > (u32) dev->wakeup.sleep_state))
continue;
- /* If users want to disable run-wake GPE,
- * we only disable it for wake and leave it for runtime
- */
- if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
- || sleep_state > (u32) dev->wakeup.sleep_state) {
- if (dev->wakeup.flags.run_wake) {
- /* set_gpe_type will disable GPE, leave it like that */
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_RUNTIME);
- }
- continue;
- }
- if (!dev->wakeup.flags.run_wake)
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
acpi_ref_wakeup_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
}
@@ -99,32 +86,13 @@ void acpi_disable_wakeup_device(u8 sleep
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
- if (!dev->wakeup.flags.valid)
- continue;
-
- if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
- || sleep_state > (u32) dev->wakeup.sleep_state) {
- if (dev->wakeup.flags.run_wake) {
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
- /* Re-enable it, since set_gpe_type will disable it */
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
- }
- continue;
- }
+ if (dev->wakeup.state.enabled &&
+ dev->wakeup.prepare_count &&
+ sleep_state <= (u32) dev->wakeup.sleep_state)
+ acpi_unref_wakeup_gpe(dev->wakeup.gpe_device,
+ dev->wakeup.gpe_number);
acpi_disable_wakeup_device_power(dev);
- /* Never disable run-wake GPE */
- if (!dev->wakeup.flags.run_wake) {
- acpi_disable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
- acpi_clear_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number, ACPI_NOT_ISR);
- }
- acpi_unref_wakeup_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
}
}
@@ -140,11 +108,6 @@ int __init acpi_wakeup_device_init(void)
/* In case user doesn't load button driver */
if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
continue;
- acpi_set_gpe_type(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number,
- ACPI_GPE_TYPE_WAKE_RUN);
- acpi_enable_gpe(dev->wakeup.gpe_device,
- dev->wakeup.gpe_number);
acpi_ref_wakeup_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
dev->wakeup.state.enabled = 1;
Index: linux-2.6/include/acpi/actypes.h
===================================================================
--- linux-2.6.orig/include/acpi/actypes.h
+++ linux-2.6/include/acpi/actypes.h
@@ -668,41 +668,29 @@ typedef u32 acpi_event_status;
/*
* GPE info flags - Per GPE
- * +-+-+-+---+---+-+
- * |7|6|5|4:3|2:1|0|
- * +-+-+-+---+---+-+
- * | | | | | |
- * | | | | | +--- Interrupt type: Edge or Level Triggered
- * | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime
+ * +-+-+-+---+-+-+-+
+ * |7|6|5|4:3|2|1|0|
+ * +-+-+-+---+-+-+-+
+ * | | | | | | |
+ * | | | | | | +--- Interrupt type: Edge or Level Triggered
+ * | | | | | +--- GPE can wake the system
+ * | | | | +--- Unused
* | | | +--- Type of dispatch -- to method, handler, or none
- * | | +--- Enabled for runtime?
- * | +--- Enabled for wake?
+ * | | +--- Unused
+ * | +--- Unused
* +--- Unused
*/
#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01
#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01
#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
-#define ACPI_GPE_TYPE_MASK (u8) 0x06
-#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06
-#define ACPI_GPE_TYPE_WAKE (u8) 0x02
-#define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */
+#define ACPI_GPE_CAN_WAKE (u8) 0x02
#define ACPI_GPE_DISPATCH_MASK (u8) 0x18
#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08
#define ACPI_GPE_DISPATCH_METHOD (u8) 0x10
#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */
-#define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20
-#define ACPI_GPE_RUN_ENABLED (u8) 0x20
-#define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */
-
-#define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40
-#define ACPI_GPE_WAKE_ENABLED (u8) 0x40
-#define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */
-
-#define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */
-
/*
* Flags for GPE and Lock interfaces
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists