linux-kernel - Re: [PATCH 0/9] pci: update pci bridge resource to get more big range for devices under it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4B1385F0.2020302@jp.fujitsu.com>
Date:	Mon, 30 Nov 2009 17:44:32 +0900
From:	Kenji Kaneshige <kaneshige.kenji@...fujitsu.com>
To:	Yinghai Lu <yinghai@...nel.org>
CC:	Jesse Barnes <jbarnes@...tuousgeek.org>,
	"Eric W. Biederman" <ebiederm@...ssion.com>,
	Alex Chiang <achiang@...com>,
	Bjorn Helgaas <bjorn.helgaas@...com>,
	Ingo Molnar <mingo@...e.hu>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
	Ivan Kokshaysky <ink@...assic.park.msu.ru>
Subject: Re: [PATCH 0/9] pci: update pci bridge resource to get more big range
 for devices under it - v13

Yinghai Lu wrote:
> Kenji Kaneshige wrote:
>> Yinghai Lu wrote:
>>> Kenji Kaneshige wrote:
>>>> My system doesn't boot (hangup) with the following error messages
>>>> from Fusion MPT SAS driver. Those are different from the one
>>>> captured with the previous version of your patches.
>>>>
>>>>
>>>> Fusion MPT SAS Host driver 3.04.12
>>>> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>>>> mptbase: ioc0: Initiating bringup
>>>> mptbase: ioc0: WARNING - Unexpected doorbell active!
>>>> mptbase: ioc0: ERROR - Failed to come READY after reset!
>>>> IocState=f0000000
>>>> mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
>>>> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
>>>> mptbase: ioc0: WARNING - NOT READY WARNING!
>>>> mptbase: ioc0: ERROR - didn't initialize properly! (-1)
>>>> mptsas: probe of 0000:09:00.0 failed with error -1
>>>> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>>>> mptbase: ioc1: Initiating bringup
>>>> mptbase: ioc1: WARNING - Unexpected doorbell active!
>>>> mptbase: ioc1: ERROR - Failed to come READY after reset!
>>>> IocState=f0000000
>>>> mptbase: ioc1: WARNING - ResetHistory bit failed to clear!
>>>> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh)
>>>> mptbase: ioc1: WARNING - NOT READY WARNING!
>>>> mptbase: ioc1: ERROR - didn't initialize properly! (-1)
>>>> mptsas: probe of 0000:0a:00.0 failed with error -1
>>>>
>>>>
>>>> I'll send the whole boot log privately.
>>> thanks, at the same time please try "debug pci=try=1"
>>>
>> I confirmed system boot up without errors by "pci=try=1".
>> I'll capture the bootlog with "debug" option and send it
>> to you soon.
> 
> Please also try "debug pci=try=7"
> it should work too.
> 

I confirmed it works.
I will send the whole boot log soon.

Thanks,
Kenji Kaneshige


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/