linux-kernel - Re: Ethernet issues with lite5200 board from linux-2.6.31

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <fa686aa40911300759h153b3300uc54b5d1871bfc839@mail.gmail.com>
Date:	Mon, 30 Nov 2009 08:59:08 -0700
From:	Grant Likely <grant.likely@...retlab.ca>
To:	Yogesh Chaudhari <mr.yogesh@...il.com>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	rt-users <linux-rt-users@...r.kernel.org>,
	Ingo Molnar <mingo@...e.hu>,
	Steven Rostedt <rostedt@...dmis.org>,
	Peter Zijlstra <peterz@...radead.org>,
	Carsten Emde <ce@...g.ch>,
	Clark Williams <williams@...hat.com>,
	Frank Rowand <frank.rowand@...sony.com>,
	Robin Gareus <robin@...eus.org>,
	Gregory Haskins <ghaskins@...ell.com>,
	Philippe Reynes <philippe.reynes@...smpp.fr>,
	Fernando Lopez-Lezcano <nando@...ma.stanford.edu>,
	Will Schmidt <will_schmidt@...t.ibm.com>,
	Darren Hart <dvhltc@...ibm.com>, Jan Blunck <jblunck@...e.de>,
	Sven-Thorsten Dietrich <sdietrich@...ell.com>,
	Jon Masters <jcm@...hat.com>,
	Mark Knecht <markknecht@...il.com>,
	John Kacur <jkacur@...hat.com>,
	linuxppc-dev <linuxppc-dev@...abs.org>
Subject: Re: Ethernet issues with lite5200 board from linux-2.6.31

On Mon, Nov 30, 2009 at 2:50 AM, Yogesh Chaudhari <mr.yogesh@...il.com> wrote:
> Hello,
>         I am running linux kernel with rt patch on embedded board
> based on lite5200 eval board. From linux-2.6.31 release, in which the
> mdio patch has gone inside,  the fec ethernet does not come up on this
> board. I get the following message at startup:
> mpc52xx MII bus: probed
> mdio_bus f0003000: error probing PHY at address 1
>
>
> After the bootup if I try to do a ifconfig I get the message:
> net eth2: of_phy_connect failed
>
>
> If I change the value of reg in dts file (lite5200.dts) to 0 then this
> ethernet comes up. However upto this kernel version, this was not
> required.
>
> Ethernet does not come up on board with original lite5200.dts file

Is your board based on the Lite5200 or the Lite5200B?  The phys are at
different addresses on those two revisions of the board.  There is a
different .dts file for each board.

> phy0: ethernet-phy@1 {
>                                 reg = <1>;
>                         };
>
> Ethernet comes up on board with this change
> phy0: ethernet-phy@1 {
>                                 reg = <0>;
>                         };

Some PHYs treat address 0 as the 'broadcast' address.  You need to
fill in this field (and modify the ethernet-phy@<address> node name)
to reflect the address that your phy is actually at.

g.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/