[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1259656422-7697-1-git-send-email-samu.p.onkalo@nokia.com>
Date: Tue, 1 Dec 2009 10:33:37 +0200
From: Samu Onkalo <samu.p.onkalo@...ia.com>
To: eric.piel@...mplin-utc.net
Cc: linux-kernel@...r.kernel.org, lm-sensors@...sensors.org,
Samu Onkalo <samu.p.onkalo@...ia.com>
Subject: [PATCH v4 0/5] LIS3 feature update
Changes since v3 patch set:
0001: two if statements combined to one
0002: added "Acked by Eric Piel" to description
0003: Replaced with edited version by Eric Piel. Tested on 8 bit device
by me.
0004: Constant names changed to shorter ones. Shorter names allowed some clean
up. No functional changes
0005: added "Acked by Eric Piel" to description
Description from version 3 patch set:
This patch set is made to top of 7 previously accepted lis3 related patches in
mm-tree:
- I2C bus support for lis3lv02d and variant accelerometer chips...
- Add the possibility to remap axes via platform data...
- Send input_sync after each measurement round...
- polled input device itself was not free'd....
- riginally the driver was only targeted to 12bits sensors...
- Most of the documentation and comments were written when the driver ..
- Lis3 accelerometer sensors have quite long power on delay ..
Tested with 2.6.32-RC7 which was patched with above 7 lis3 related patches.
Tested only with 8 bit lis3 device since I don't have possibility to test other chips.
0001:
Implement selftest feature for HW diagnostic purposes. This feature can be used to detect if the sensor is electrically or mechanically damaged.
0002:
Calibration functionality is removed from the driver. Chip is allready calibrated by the manufacturer. SW calibration doesn't improve the situation.
0003:
Added possibility to set chip sampling rate. Position entry in sysfs allows reading at sampling rate.
0004:
Scale output values to mg (1/1000 of earth gravity).
Behaviour of the joystick interface is not changed. All other interfaces will have different scale after this patch. See further information from patch itself.
0005:
Update documentation to cover changes which were made by these patches.
Samu Onkalo (5):
lis3: Selftest support
LIS3LV02D: Remove calibaration functionality
lis3: Sysfs entry for setting chip measurement rate
lis3: Scale output values to mg
LIS3: Update documentation to match latest changes
Documentation/hwmon/lis3lv02d | 31 ++++++--
drivers/hwmon/lis3lv02d.c | 174 ++++++++++++++++++++++++++++++++---------
drivers/hwmon/lis3lv02d.h | 23 ++++-
include/linux/lis3lv02d.h | 3 +
4 files changed, 182 insertions(+), 49 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists