Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-rc8 (rdunlap@ca-ostest293.us.oracle.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #2 SMP Tue Nov 24 14:00:39 PST 2009 Command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@139.185.50.77/eth0,50000@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe50000 (usable) BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data) BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000027ffff000 (usable) debug: ignoring loglevel setting. DMI 2.3 present. last_pfn = 0x27ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000280000000 aka 10240M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7fe50 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007fe50000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe50000 page 4k kernel direct mapping tables up to 7fe50000 @ 8000-c000 init_memory_mapping: 0000000100000000-000000027ffff000 0100000000 - 027fe00000 page 2M 027fe00000 - 027ffff000 page 4k kernel direct mapping tables up to 27ffff000 @ a000-16000 RAMDISK: 37eac000 - 37fef113 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 000000007fe50780 0005C (v01 HP A08 00000002 Ò? 0000162E) ACPI: FACP 000000007fe50800 000F4 (v03 HP A08 00000002 Ò? 0000162E) ACPI: DSDT 000000007fe50900 03F75 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 000000007fe50100 00040 ACPI: SPCR 000000007fe50140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 000000007fe501c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 000000007fe50200 00038 (v01 HP A08 00000002 Ò? 0000162E) ACPI: SPMI 000000007fe50240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 000000007fe50280 000DE (v01 HP 00000083 00000002 00000000) ACPI: SRAT 000000007fe50380 00110 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 SRAT: Node 0 PXM 0 100000000-180000000 SRAT: Node 1 PXM 1 180000000-280000000 NUMA: Allocated memnodemap from 11000 - 16040 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000016040 - 000000000002c03f] bootmap [000000000002d000 - 000000000005cfff] pages 30 (9 early reservations) ==> bootmem [0000000000 - 0180000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a549d8] TEXT DATA BSS ==> [0001000000 - 0001a549d8] #3 [0037eac000 - 0037fef113] RAMDISK ==> [0037eac000 - 0037fef113] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [0001a55000 - 0001a5510c] BRK ==> [0001a55000 - 0001a5510c] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 0000011000] PGTABLE ==> [000000a000 - 0000011000] #8 [0000011000 - 0000016040] MEMNODEMAP ==> [0000011000 - 0000016040] Bootmem setup node 1 0000000180000000-000000027ffff000 NODE_DATA [0000000180000000 - 0000000180015fff] bootmap [0000000180016000 - 0000000180035fff] pages 20 (9 early reservations) ==> bootmem [0180000000 - 027ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 0001a549d8] TEXT DATA BSS #3 [0037eac000 - 0037fef113] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [0001a55000 - 0001a5510c] BRK #6 [0000008000 - 000000a000] PGTABLE #7 [000000a000 - 0000011000] PGTABLE #8 [0000011000 - 0000016040] MEMNODEMAP found SMP MP-table at [ffff8800000f4f80] f4f80 [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880001c00000-ffff8800053fffff] on node 0 [ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0027ffff Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fe50 0: 0x00100000 -> 0x00180000 1: 0x00180000 -> 0x0027ffff On node 0 totalpages: 1048047 DMA zone: 56 pages used for memmap DMA zone: 113 pages reserved DMA zone: 3830 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505480 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048575 Normal zone: 14336 pages used for memmap Normal zone: 1034239 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xf7df0000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xf7df0000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfdef0000] gsi_base[38]) IOAPIC[1]: apic_id 9, version 17, address 0xfdef0000, GSI 38-61 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 62 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 000000007fe50000 - 000000007fe58000 PM: Registered nosave memory: 000000007fe58000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:2 PERCPU: Embedded 30 pages/cpu @ffff880005600000 s91224 r8192 d23464 u1048576 pcpu-alloc: s91224 r8192 d23464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 2 [1] 1 3 Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2060669 Policy zone: Normal Kernel command line: ro root=/dev/cciss/c0d0p3 console=tty0 console=ttyS0,115200n8 netconsole=50000@139.185.50.77/eth0,50000@139.185.50.76/00:18:FE:34:1C:3D nmi_watchdog=2 selinux=0 debug ignore_loglevel initcall_debug print_fatal_signals=1 slub_debug=FPZ PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ fa6c000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 8193176k/10485756k available (4275k kernel code, 2099268k absent, 193312k reserved, 3924k data, 936k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1024 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled allocated 83886080 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2611.921 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.84 BogoMIPS (lpj=2611921) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 26435 entries in 104 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 calling migration_init+0x0/0x5a @ 1 initcall migration_init+0x0/0x5a returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x59 @ 1 initcall spawn_ksoftirqd+0x0/0x59 returned 0 after 0 usecs calling init_call_single_data+0x0/0x87 @ 1 initcall init_call_single_data+0x0/0x87 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x75 @ 1 initcall spawn_softlockup_task+0x0/0x75 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1f6 @ 1 initcall tracer_alloc_buffers+0x0/0x1f6 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling trace_workqueue_early_init+0x0/0x108 @ 1 initcall trace_workqueue_early_init+0x0/0x108 returned 0 after 0 usecs calling mce_amd_init+0x0/0x33 @ 1 initcall mce_amd_init+0x0/0x33 returned 0 after 0 usecs Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611910) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/0x2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611910) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5223.83 BogoMIPS (lpj=2611916) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/0x3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02 Brought up 4 CPUs Total of 4 processors activated (20895.31 BogoMIPS). Testing NMI watchdog ... OK. CPU0 attaching sched-domain: domain 0: span 0,2 level MC groups: 0 2 domain 1: span 0-3 level NODE groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) CPU1 attaching sched-domain: domain 0: span 1,3 level MC groups: 1 3 domain 1: span 0-3 level NODE groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) CPU2 attaching sched-domain: domain 0: span 0,2 level MC groups: 2 0 domain 1: span 0-3 level NODE groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) CPU3 attaching sched-domain: domain 0: span 1,3 level MC groups: 3 1 domain 1: span 0-3 level NODE groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0xc8 @ 1 initcall net_ns_init+0x0/0xc8 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x41 @ 1 initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling init_smp_flush+0x0/0x26 @ 1 initcall init_smp_flush+0x0/0x26 returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xd @ 1 initcall alloc_frozen_cpus+0x0/0xd returned 0 after 0 usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs calling ksysfs_init+0x0/0xbb @ 1 initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs calling async_init+0x0/0x61 @ 1 initcall async_init+0x0/0x61 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x31 @ 1 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x41 @ 1 initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5a @ 1 initcall debugfs_init+0x0/0x5a returned 0 after 0 usecs calling securityfs_init+0x0/0x51 @ 1 initcall securityfs_init+0x0/0x51 returned 0 after 0 usecs calling random32_init+0x0/0xd1 @ 1 initcall random32_init+0x0/0xd1 returned 0 after 0 usecs calling gnttab_init+0x0/0x16e @ 1 initcall gnttab_init+0x0/0x16e returned -19 after 0 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 976 usecs calling early_resume_init+0x0/0x1a0 @ 1 Time: 10:10:50 Date: 12/01/09 initcall early_resume_init+0x0/0x1a0 returned 0 after 976 usecs calling cpufreq_core_init+0x0/0x8c @ 1 initcall cpufreq_core_init+0x0/0x8c returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 0 usecs calling net_inuse_init+0x0/0x26 @ 1 initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x14c @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x14c returned 0 after 976 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling xenbus_probe_init+0x0/0x10a @ 1 initcall xenbus_probe_init+0x0/0x10a returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc3 @ 1 initcall vtconsole_class_init+0x0/0xc3 returned 0 after 0 usecs calling register_node_type+0x0/0x6b @ 1 initcall register_node_type+0x0/0x6b returned 0 after 0 usecs calling amd_postcore_init+0x0/0x885 @ 1 node 0 link 1: io port [1000, 3fff] node 1 link 2: io port [4000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 1: mmio [e8000000, fddfffff] node 1 link 2: mmio [fde00000, fdffffff] node 0 link 1: mmio [80000000, 83ffffff] node 1 link 2: mmio [84000000, 8fffffff] node 0 link 1: mmio [a0000, bffff] TOM2: 0000000280000000 aka 10240M bus: [00,3f] on node 0 link 1 bus: 00 index 0 io port: [0, 3fff] bus: 00 index 1 mmio: [90000000, fddfffff] bus: 00 index 2 mmio: [80000000, 83ffffff] bus: 00 index 3 mmio: [a0000, bffff] bus: 00 index 4 mmio: [fe000000, ffffffff] bus: 00 index 5 mmio: [280000000, fcffffffff] bus: [40,ff] on node 1 link 2 bus: 40 index 0 io port: [4000, ffff] bus: 40 index 1 mmio: [fde00000, fdffffff] bus: 40 index 2 mmio: [84000000, 8fffffff] initcall amd_postcore_init+0x0/0x885 returned 0 after 23437 usecs calling arch_kdebugfs_init+0x0/0x242 @ 1 initcall arch_kdebugfs_init+0x0/0x242 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x63 @ 1 initcall mtrr_if_init+0x0/0x63 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling arch_init_ftrace_syscalls+0x0/0xfd @ 1 initcall arch_init_ftrace_syscalls+0x0/0xfd returned 0 after 976 usecs calling acpi_pci_init+0x0/0x5c @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x5c returned 0 after 976 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs calling dmi_id_init+0x0/0x31a @ 1 initcall dmi_id_init+0x0/0x31a returned 0 after 976 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xbf @ 1 initcall dma_channel_table_init+0x0/0xbf returned 0 after 0 usecs calling pci_arch_init+0x0/0x57 @ 1 PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: HP ProLiant BL685c G1 detected, enabling pci=bfsort. initcall pci_arch_init+0x0/0x57 returned 0 after 3906 usecs calling topology_init+0x0/0x86 @ 1 initcall topology_init+0x0/0x86 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x216 @ 1 initcall param_sysfs_init+0x0/0x216 returned 0 after 5859 usecs calling pm_sysrq_init+0x0/0x1e @ 1 initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x37 @ 1 initcall init_slow_work+0x0/0x37 returned 0 after 0 usecs calling default_bdi_init+0x0/0xb6 @ 1 initcall default_bdi_init+0x0/0xb6 returned 0 after 976 usecs calling init_bio+0x0/0xd3 @ 1 bio: create slab at 0 initcall init_bio+0x0/0xd3 returned 0 after 976 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x68 @ 1 initcall fsnotify_notification_init+0x0/0x68 returned 0 after 976 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x6e @ 1 initcall blk_softirq_init+0x0/0x6e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x6e @ 1 initcall blk_iopoll_setup+0x0/0x6e returned 0 after 0 usecs calling genhd_device_init+0x0/0x66 @ 1 initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling pci_slot_init+0x0/0x4a @ 1 initcall pci_slot_init+0x0/0x4a returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x262 @ 1 ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007fe58000 004F0 (v02 HP PNOWSSDT 00000002 HP 00000001) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at 80000000 - 8fffffff initcall acpi_init+0x0/0x262 returned 0 after 207031 usecs calling dock_init+0x0/0x8d @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0x8d returned 0 after 13671 usecs calling acpi_pci_root_init+0x0/0x28 @ 1 ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xf7de0000-0xf7de0fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xf7dd0000-0xf7dd00ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:03.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff] pci 0000:01:03.0: reg 18 32bit mmio: [0xf7ff0000-0xf7ffffff] pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:01:03.0: supports D1 D2 pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff] pci 0000:01:04.0: reg 14 32bit mmio: [0xf7fe0000-0xf7fe01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.0: PME# disabled pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff] pci 0000:01:04.2: reg 14 32bit mmio: [0xf7fd0000-0xf7fd07ff] pci 0000:01:04.2: reg 18 32bit mmio: [0xf7fc0000-0xf7fc3fff] pci 0000:01:04.2: reg 1c 32bit mmio: [0xf7f00000-0xf7f7ffff] pci 0000:01:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: PME# disabled pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: PME# disabled pci 0000:01:04.6: reg 10 32bit mmio: [0xf7ef0000-0xf7ef00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: PME# disabled pci 0000:00:09.0: transparent bridge pci 0000:00:09.0: bridge io port: [0x1000-0x2fff] pci 0000:00:09.0: bridge 32bit mmio: [0xf7e00000-0xf7ffffff] pci 0000:00:09.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0b.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0c.0: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:05:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:05:00.0: PME# supported from D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:04:00.0: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0d.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:07:04.0: reg 10 64bit mmio: [0xfdcf0000-0xfdcfffff] pci 0000:07:04.0: reg 18 64bit mmio: [0xfdce0000-0xfdceffff] pci 0000:07:04.0: PME# supported from D3hot D3cold pci 0000:07:04.0: PME# disabled pci 0000:07:04.1: reg 10 64bit mmio: [0xfdcd0000-0xfdcdffff] pci 0000:07:04.1: reg 18 64bit mmio: [0xfdcc0000-0xfdccffff] pci 0000:07:04.1: PME# supported from D3hot D3cold pci 0000:07:04.1: PME# disabled pci 0000:06:00.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:08:00.0: reg 10 64bit mmio: [0xfddf0000-0xfddf0fff] pci 0000:08:00.0: reg 18 64bit mmio: [0xfdde0000-0xfdde00ff] pci 0000:08:00.0: reg 20 io port: [0x3000-0x30ff] pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff] pci 0000:08:00.1: reg 10 64bit mmio: [0xfddd0000-0xfddd0fff] pci 0000:08:00.1: reg 18 64bit mmio: [0xfddc0000-0xfddc00ff] pci 0000:08:00.1: reg 20 io port: [0x3400-0x34ff] pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: bridge io port: [0x3000-0x3fff] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2.NC1B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE3.NC2B._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:01.0: reg 14 32bit mmio: [0xfdef0000-0xfdef0fff] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0c.0: PME# disabled pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0d.0: PME# disabled pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:40:0e.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:41:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:40:0c.0: bridge io port: [0x4000-0x4fff] pci 0000:40:0c.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:42:08.0: reg 10 64bit mmio: [0xfdf80000-0xfdffffff] pci 0000:42:08.0: reg 18 io port: [0x4000-0x40ff] pci 0000:42:08.0: reg 1c 32bit mmio: [0xfdf70000-0xfdf77fff] pci 0000:42:08.0: reg 30 32bit mmio pref: [0x000000-0x003fff] pci 0000:42:08.0: supports D1 pci 0000:41:00.0: bridge io port: [0x4000-0x4fff] pci 0000:41:00.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2.SASB._PRT] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 2736330 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *7 ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 203125 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling balloon_init+0x0/0x1c3 @ 1 initcall balloon_init+0x0/0x1c3 returned -19 after 0 usecs calling misc_init+0x0/0xb8 @ 1 initcall misc_init+0x0/0xb8 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x78 @ 1 vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x78 returned 0 after 44921 usecs calling cn_init+0x0/0xf3 @ 1 initcall cn_init+0x0/0xf3 returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 13671 usecs calling ata_init+0x0/0x33f @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x33f returned 0 after 13671 usecs calling phy_init+0x0/0x31 @ 1 initcall phy_init+0x0/0x31 returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x25 @ 1 initcall init_pcmcia_cs+0x0/0x25 returned 0 after 0 usecs calling usb_init+0x0/0x1a8 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1a8 returned 0 after 42968 usecs calling serio_init+0x0/0x89 @ 1 initcall serio_init+0x0/0x89 returned 0 after 0 usecs calling input_init+0x0/0x133 @ 1 initcall input_init+0x0/0x133 returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling hwmon_init+0x0/0x10d @ 1 initcall hwmon_init+0x0/0x10d returned 0 after 0 usecs calling thermal_init+0x0/0x40 @ 1 initcall thermal_init+0x0/0x40 returned 0 after 0 usecs calling md_init+0x0/0xd0 @ 1 initcall md_init+0x0/0xd0 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x125 @ 1 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x125 returned 0 after 15625 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x177 @ 1 initcall net_dev_init+0x0/0x177 returned 0 after 0 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xd0 @ 1 initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x67 @ 1 initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x83 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x83 returned 0 after 72265 usecs calling sysctl_init+0x0/0x49 @ 1 initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs calling xen_mc_debugfs+0x0/0x118 @ 1 initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs calling xen_mmu_debugfs+0x0/0x2be @ 1 initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs calling print_all_ICs+0x0/0x500 @ 1 initcall print_all_ICs+0x0/0x500 returned 0 after 0 usecs calling hpet_late_init+0x0/0x1bc @ 1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter initcall hpet_late_init+0x0/0x1bc returned 0 after 13671 usecs calling clocksource_done_booting+0x0/0x36 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x36 returned 0 after 15809 usecs calling ftrace_init_debugfs+0x0/0x214 @ 1 initcall ftrace_init_debugfs+0x0/0x214 returned 0 after 101 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 4 usecs calling tracer_init_debugfs+0x0/0x33e @ 1 initcall tracer_init_debugfs+0x0/0x33e returned 0 after 189 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 4 usecs calling stat_workqueue_init+0x0/0x2d @ 1 initcall stat_workqueue_init+0x0/0x2d returned 0 after 5 usecs calling event_trace_init+0x0/0x1e2 @ 1 initcall event_trace_init+0x0/0x1e2 returned 0 after 21274 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 51 usecs calling eventpoll_init+0x0/0xc3 @ 1 initcall eventpoll_init+0x0/0xc3 returned 0 after 72 usecs calling anon_inode_init+0x0/0x123 @ 1 initcall anon_inode_init+0x0/0x123 returned 0 after 16 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs calling acpi_event_init+0x0/0x80 @ 1 initcall acpi_event_init+0x0/0x80 returned 0 after 84 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 75210 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x800-0x8fe has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0x9ff-0x9ff has been reserved system 00:01: ioport range 0xa00-0xafe has been reserved system 00:01: ioport range 0xaff-0xaff has been reserved system 00:01: ioport range 0xb00-0xbfe has been reserved system 00:01: ioport range 0xbff-0xbff has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0x80000000-0x8fffffff could not be reserved system 00:01: iomem range 0xf7df0000-0xf7df0fff could not be reserved system 00:01: iomem range 0xfdef0000-0xfdef0fff could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 491870 usecs calling chr_dev_init+0x0/0xc7 @ 1 initcall chr_dev_init+0x0/0xc7 returned 0 after 416 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 32 usecs calling init_pcmcia_bus+0x0/0x74 @ 1 initcall init_pcmcia_bus+0x0/0x74 returned 0 after 67 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 1 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs calling init_acpi_pm_clocksource+0x0/0xef @ 1 initcall init_acpi_pm_clocksource+0x0/0xef returned 0 after 4426 usecs calling pcibios_assign_resources+0x0/0x76 @ 1 pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 pci 0000:00:09.0: IO window: 0x1000-0x2fff pci 0000:00:09.0: MEM window: 0xf7e00000-0xf7ffffff pci 0000:00:09.0: PREFETCH window: 0xe8000000-0xefffffff pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: disabled pci 0000:02:00.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:02:00.0: PREFETCH window: 0x90000000-0x900fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:0b.0: PREFETCH window: 0x90000000-0x900fffff pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xfa000000-0xfbffffff pci 0000:04:00.0: PREFETCH window: 0x90100000-0x901fffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xfa000000-0xfbffffff pci 0000:00:0c.0: PREFETCH window: 0x90100000-0x901fffff pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:0e.0: IO window: 0x3000-0x3fff pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:0e.0: PREFETCH window: 0x90200000-0x902fffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:04:00.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:42:04.0: PCI bridge, secondary bus 0000:43 pci 0000:42:04.0: IO window: disabled pci 0000:42:04.0: MEM window: disabled pci 0000:42:04.0: PREFETCH window: disabled pci 0000:41:00.0: PCI bridge, secondary bus 0000:42 pci 0000:41:00.0: IO window: 0x4000-0x4fff pci 0000:41:00.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:41:00.0: PREFETCH window: 0x84000000-0x840fffff pci 0000:40:0c.0: PCI bridge, secondary bus 0000:41 pci 0000:40:0c.0: IO window: 0x4000-0x4fff pci 0000:40:0c.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:40:0c.0: PREFETCH window: 0x84000000-0x840fffff pci 0000:40:0d.0: PCI bridge, secondary bus 0000:44 pci 0000:40:0d.0: IO window: disabled pci 0000:40:0d.0: MEM window: disabled pci 0000:40:0d.0: PREFETCH window: disabled pci 0000:40:0e.0: PCI bridge, secondary bus 0000:47 pci 0000:40:0e.0: IO window: disabled pci 0000:40:0e.0: MEM window: disabled pci 0000:40:0e.0: PREFETCH window: disabled pci 0000:40:0c.0: setting latency timer to 64 pci 0000:41:00.0: setting latency timer to 64 pci 0000:40:0d.0: setting latency timer to 64 pci 0000:40:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0x3fff] pci_bus 0000:00: resource 1 mem: [0x90000000-0xfddfffff] pci_bus 0000:00: resource 2 mem: [0x80000000-0x83ffffff] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff] pci_bus 0000:00: resource 4 mem: [0xfe000000-0xffffffff] pci_bus 0000:00: resource 5 mem: [0x280000000-0xfcffffffff] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xf7ffffff] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff] pci_bus 0000:01: resource 3 io: [0x00-0x3fff] pci_bus 0000:01: resource 4 mem: [0x90000000-0xfddfffff] pci_bus 0000:01: resource 5 mem: [0x80000000-0x83ffffff] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff] pci_bus 0000:01: resource 7 mem: [0xfe000000-0xffffffff] pci_bus 0000:01: resource 8 mem: [0x280000000-0xfcffffffff] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x900fffff] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x900fffff] pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:04: resource 2 pref mem [0x90100000-0x901fffff] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:05: resource 2 pref mem [0x90100000-0x901fffff] pci_bus 0000:06: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:07: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:08: resource 0 io: [0x3000-0x3fff] pci_bus 0000:08: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:08: resource 2 pref mem [0x90200000-0x902fffff] pci_bus 0000:40: resource 0 io: [0x4000-0xffff] pci_bus 0000:40: resource 1 mem: [0xfde00000-0xfdffffff] pci_bus 0000:40: resource 2 mem: [0x84000000-0x8fffffff] pci_bus 0000:41: resource 0 io: [0x4000-0x4fff] pci_bus 0000:41: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:41: resource 2 pref mem [0x84000000-0x840fffff] pci_bus 0000:42: resource 0 io: [0x4000-0x4fff] pci_bus 0000:42: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:42: resource 2 pref mem [0x84000000-0x840fffff] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 2290743 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 11 usecs calling inet_init+0x0/0x204 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x204 returned 0 after 156534 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 17217 usecs calling pci_apply_final_quirks+0x0/0x35 @ 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:01:03.0: Boot video device pci 0000:01:04.4: HCRESET not completed yet! pci 0000:40:0c.0: Found enabled HT MSI Mapping pci 0000:40:0d.0: Found enabled HT MSI Mapping pci 0000:40:0e.0: Found enabled HT MSI Mapping initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 239730 usecs calling populate_rootfs+0x0/0x23a @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 1292k freed initcall populate_rootfs+0x0/0x23a returned 0 after 56422 usecs calling pci_iommu_init+0x0/0x21 @ 1 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture initcall pci_iommu_init+0x0/0x21 returned 0 after 76040 usecs calling calgary_fixup_tce_spaces+0x0/0xee @ 1 initcall calgary_fixup_tce_spaces+0x0/0xee returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 85 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 18 usecs calling sbf_init+0x0/0xd7 @ 1 initcall sbf_init+0x0/0xd7 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 56 usecs calling add_rtc_cmos+0x0/0xa4 @ 1 platform rtc_cmos: registered platform RTC device (no PNP device found) initcall add_rtc_cmos+0x0/0xa4 returned 0 after 36163 usecs calling cache_sysfs_init+0x0/0x5e @ 1 initcall cache_sysfs_init+0x0/0x5e returned 0 after 677 usecs calling mce_init_device+0x0/0xf8 @ 1 initcall mce_init_device+0x0/0xf8 returned 0 after 242 usecs calling threshold_init_device+0x0/0x44 @ 1 initcall threshold_init_device+0x0/0x44 returned 0 after 1 usecs calling thermal_throttle_init_device+0x0/0x89 @ 1 initcall thermal_throttle_init_device+0x0/0x89 returned 0 after 0 usecs calling msr_init+0x0/0x104 @ 1 initcall msr_init+0x0/0x104 returned 0 after 212 usecs calling cpuid_init+0x0/0x104 @ 1 initcall cpuid_init+0x0/0x104 returned 0 after 213 usecs calling ioapic_init_sysfs+0x0/0x99 @ 1 initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 96 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 42 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 11 usecs calling init_vdso_vars+0x0/0x19d @ 1 initcall init_vdso_vars+0x0/0x19d returned 0 after 13 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs calling sysenter_setup+0x0/0x2cc @ 1 initcall sysenter_setup+0x0/0x2cc returned 0 after 5 usecs calling init_sched_debug_procfs+0x0/0x29 @ 1 initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 10 usecs calling proc_schedstat_init+0x0/0x1f @ 1 initcall proc_schedstat_init+0x0/0x1f returned 0 after 5 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 6 usecs calling ioresources_init+0x0/0x36 @ 1 initcall ioresources_init+0x0/0x36 returned 0 after 11 usecs calling uid_cache_init+0x0/0x70 @ 1 initcall uid_cache_init+0x0/0x70 returned 0 after 42 usecs calling init_posix_timers+0x0/0x1b5 @ 1 initcall init_posix_timers+0x0/0x1b5 returned 0 after 26 usecs calling init_posix_cpu_timers+0x0/0x101 @ 1 initcall init_posix_cpu_timers+0x0/0x101 returned 0 after 1 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 25 usecs calling create_proc_profile+0x0/0x23b @ 1 initcall create_proc_profile+0x0/0x23b returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 57 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 58 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 6 usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after 6 usecs calling futex_init+0x0/0x63 @ 1 initcall futex_init+0x0/0x63 returned 0 after 9 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 5 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 5 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 12 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 47 usecs calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 22 usecs calling crash_notes_memory_init+0x0/0x36 @ 1 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs calling pid_namespaces_init+0x0/0x2d @ 1 initcall pid_namespaces_init+0x0/0x2d returned 0 after 38 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1259662259.488:1): initialized initcall audit_init+0x0/0x133 returned 0 after 34190 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 2 usecs calling init_kprobes+0x0/0x167 @ 1 initcall init_kprobes+0x0/0x167 returned 0 after 7160 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 57 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs calling init_tracepoints+0x0/0x17 @ 1 initcall init_tracepoints+0x0/0x17 returned 0 after 0 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 9 usecs calling ftrace_mod_cmd_init+0x0/0x12 @ 1 initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 1 usecs calling init_events+0x0/0x62 @ 1 initcall init_events+0x0/0x62 returned 0 after 5 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 0 usecs calling init_function_trace+0x0/0x3e @ 1 initcall init_function_trace+0x0/0x3e returned 0 after 1 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 1 usecs calling stack_trace_init+0x0/0x6b @ 1 initcall stack_trace_init+0x0/0x6b returned 0 after 19 usecs calling init_graph_trace+0x0/0x32 @ 1 initcall init_graph_trace+0x0/0x32 returned 0 after 1 usecs calling init_kmem_tracer+0x0/0x56 @ 1 initcall init_kmem_tracer+0x0/0x56 returned 0 after 2 usecs calling init_blk_tracer+0x0/0x57 @ 1 initcall init_blk_tracer+0x0/0x57 returned 0 after 2 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 7 usecs calling init_per_zone_wmark_min+0x0/0x70 @ 1 initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 513 usecs calling kswapd_init+0x0/0x4d @ 1 initcall kswapd_init+0x0/0x4d returned 0 after 96 usecs calling setup_vmstat+0x0/0xae @ 1 initcall setup_vmstat+0x0/0xae returned 0 after 33 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 8 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 6 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 6 usecs calling hugetlb_init+0x0/0x31a @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x31a returned 0 after 27287 usecs calling ksm_init+0x0/0x16f @ 1 initcall ksm_init+0x0/0x16f returned 0 after 162 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 7 usecs calling slab_sysfs_init+0x0/0xf0 @ 1 initcall slab_sysfs_init+0x0/0xf0 returned 0 after 6279 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 97 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 7 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 195 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 225 usecs calling aio_setup+0x0/0x9f @ 1 initcall aio_setup+0x0/0x9f returned 0 after 372 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 42 usecs calling init_sys32_ioctl+0x0/0x7c @ 1 initcall init_sys32_ioctl+0x0/0x7c returned 0 after 14 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 2 usecs calling dquot_init+0x0/0xfe @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xfe returned 0 after 34230 usecs calling init_v2_quota_format+0x0/0x12 @ 1 initcall init_v2_quota_format+0x0/0x12 returned 0 after 0 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 6 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 5 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 5 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 5 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 5 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 5 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 5 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 5 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 12 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 5 usecs calling proc_kcore_init+0x0/0xb5 @ 1 initcall proc_kcore_init+0x0/0xb5 returned 0 after 14 usecs calling vmcore_init+0x0/0x8e2 @ 1 initcall vmcore_init+0x0/0x8e2 returned 0 after 1 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 5 usecs calling proc_page_init+0x0/0x3c @ 1 initcall proc_page_init+0x0/0x3c returned 0 after 10 usecs calling configfs_init+0x0/0xb3 @ 1 initcall configfs_init+0x0/0xb3 returned 0 after 122 usecs calling init_devpts_fs+0x0/0x4d @ 1 initcall init_devpts_fs+0x0/0x4d returned 0 after 45 usecs calling init_ext3_fs+0x0/0x6b @ 1 initcall init_ext3_fs+0x0/0x6b returned 0 after 223 usecs calling journal_init+0x0/0x99 @ 1 initcall journal_init+0x0/0x99 returned 0 after 412 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 1 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 121 usecs calling init_iso9660_fs+0x0/0x6c @ 1 initcall init_iso9660_fs+0x0/0x6c returned 0 after 126 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling ipc_init+0x0/0x2f @ 1 msgmni has been set to 16004 initcall ipc_init+0x0/0x2f returned 0 after 14644 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 2 usecs calling init_mqueue_fs+0x0/0xb4 @ 1 initcall init_mqueue_fs+0x0/0xb4 returned 0 after 129 usecs calling key_proc_init+0x0/0x53 @ 1 initcall key_proc_init+0x0/0x53 returned 0 after 13 usecs calling selinux_nf_ip_init+0x0/0x60 @ 1 initcall selinux_nf_ip_init+0x0/0x60 returned 0 after 0 usecs calling init_sel_fs+0x0/0x69 @ 1 initcall init_sel_fs+0x0/0x69 returned 0 after 0 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 21 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs calling sel_netnode_init+0x0/0x72 @ 1 initcall sel_netnode_init+0x0/0x72 returned 0 after 0 usecs calling sel_netport_init+0x0/0x72 @ 1 initcall sel_netport_init+0x0/0x72 returned 0 after 0 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 1 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 200 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 15 usecs calling skcipher_module_init+0x0/0x35 @ 1 initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 2 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 1 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 109 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 81 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 146 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 3074 usecs calling proc_genhd_init+0x0/0x36 @ 1 initcall proc_genhd_init+0x0/0x36 returned 0 after 12 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) initcall bsg_init+0x0/0x12e returned 0 after 23477 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 13940 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 5975 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 15641 usecs calling cfq_init+0x0/0x94 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0x94 returned 0 after 19841 usecs calling percpu_counter_startup+0x0/0x19 @ 1 initcall percpu_counter_startup+0x0/0x19 returned 0 after 9 usecs calling dynamic_debug_init+0x0/0x12b @ 1 initcall dynamic_debug_init+0x0/0x12b returned 0 after 150 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 385 usecs calling pcie_portdrv_init+0x0/0x4c @ 1 alloc irq_desc for 62 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0b.0: irq 62 for MSI/MSI-X pcieport 0000:00:0b.0: setting latency timer to 64 alloc irq_desc for 63 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0c.0: irq 63 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 alloc irq_desc for 64 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0d.0: irq 64 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 alloc irq_desc for 65 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0e.0: irq 65 for MSI/MSI-X pcieport 0000:00:0e.0: setting latency timer to 64 alloc irq_desc for 66 on node 1 alloc kstat_irqs on node 1 pcieport 0000:40:0c.0: irq 66 for MSI/MSI-X pcieport 0000:40:0c.0: setting latency timer to 64 alloc irq_desc for 67 on node 1 alloc kstat_irqs on node 1 pcieport 0000:40:0d.0: irq 67 for MSI/MSI-X pcieport 0000:40:0d.0: setting latency timer to 64 alloc irq_desc for 68 on node 1 alloc kstat_irqs on node 1 pcieport 0000:40:0e.0: irq 68 for MSI/MSI-X pcieport 0000:40:0e.0: setting latency timer to 64 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 492745 usecs calling aer_service_init+0x0/0x2b @ 1 aer 0000:00:0b.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0c.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0d.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0e.0:pcie02: AER service couldn't init device: no _OSC support initcall aer_service_init+0x0/0x2b returned 0 after 243211 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 24371 usecs calling pcied_init+0x0/0x7a @ 1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0x7a returned 0 after 30315 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5f returned -19 after 29977 usecs calling pci_stub_init+0x0/0x12a @ 1 pci-stub: invalid id string "" initcall pci_stub_init+0x0/0x12a returned 0 after 14874 usecs calling fb_console_init+0x0/0x12a @ 1 initcall fb_console_init+0x0/0x12a returned 0 after 46 usecs calling xenfb_init+0x0/0x44 @ 1 initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs calling vesafb_init+0x0/0x235 @ 1 initcall vesafb_init+0x0/0x235 returned 0 after 102 usecs calling efifb_init+0x0/0x1f2 @ 1 initcall efifb_init+0x0/0x1f2 returned -19 after 4 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 6 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 60 usecs calling acpi_ac_init+0x0/0x45 @ 1 initcall acpi_ac_init+0x0/0x45 returned 0 after 55 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 35422 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 44 usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 1528 usecs calling acpi_processor_init+0x0/0x10e @ 1 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 initcall acpi_processor_init+0x0/0x10e returned 0 after 81712 usecs calling acpi_container_init+0x0/0x42 @ 1 initcall acpi_container_init+0x0/0x42 returned 0 after 5616 usecs calling acpi_thermal_init+0x0/0x7b @ 1 initcall acpi_thermal_init+0x0/0x7b returned 0 after 89 usecs calling acpi_battery_init+0x0/0x16 @ 1 initcall acpi_battery_init+0x0/0x16 returned 0 after 5 usecs calling 1_acpi_battery_init_async+0x0/0x3c @ 76 initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 73 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xb3 @ 1 initcall hyper_sysfs_init+0x0/0xb3 returned -19 after 0 usecs calling rand_initialize+0x0/0x31 @ 1 initcall rand_initialize+0x0/0x31 returned 0 after 16 usecs calling tty_init+0x0/0xf5 @ 1 initcall tty_init+0x0/0xf5 returned 0 after 3064 usecs calling pty_init+0x0/0x284 @ 1 initcall pty_init+0x0/0x284 returned 0 after 63 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 9 usecs calling xen_init+0x0/0x78 @ 1 initcall xen_init+0x0/0x78 returned -19 after 0 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 84 usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned 0 after 258 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 16609 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 12699 usecs calling agp_intel_init+0x0/0x29 @ 1 initcall agp_intel_init+0x0/0x29 returned 0 after 60 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 46 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 45 usecs calling init_tis+0x0/0x91 @ 1 initcall init_tis+0x0/0x91 returned 0 after 40 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 3 usecs calling serial8250_init+0x0/0x14c @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_init+0x0/0x14c returned 0 after 627179 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 9128 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 99 usecs calling init_kgdboc+0x0/0x16 @ 1 initcall init_kgdboc+0x0/0x16 returned 0 after 1 usecs calling topology_sysfs_init+0x0/0x53 @ 1 initcall topology_sysfs_init+0x0/0x53 returned 0 after 75 usecs calling brd_init+0x0/0x160 @ 1 brd: module loaded initcall brd_init+0x0/0x160 returned 0 after 11513 usecs calling loop_init+0x0/0x189 @ 1 loop: module loaded initcall loop_init+0x0/0x189 returned 0 after 10722 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 1 usecs calling mac_hid_init+0x0/0x8e @ 1 input: Macintosh mouse button emulation as /class/input/input1 initcall mac_hid_init+0x0/0x8e returned 0 after 31280 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs calling init_sd+0x0/0x181 @ 1 initcall init_sd+0x0/0x181 returned 0 after 231 usecs calling init_sr+0x0/0x49 @ 1 initcall init_sr+0x0/0x49 returned 0 after 42 usecs calling init_sg+0x0/0x122 @ 1 initcall init_sg+0x0/0x122 returned 0 after 81 usecs calling piix_init+0x0/0x29 @ 1 initcall piix_init+0x0/0x29 returned 0 after 59 usecs calling fixed_mdio_bus_init+0x0/0xf4 @ 1 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 10653 usecs calling bnx2_init+0x0/0x1b @ 1 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: PCI INT A -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw bnx2 0000:03:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 00:18:fe:35:26:f6 ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 bnx2 0000:05:00.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-mips-06-5.0.0.j3.fw bnx2 0000:05:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-06-5.0.0.j3.fw eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:18:fe:35:26:f4 initcall bnx2_init+0x0/0x1b returned 0 after 467965 usecs calling net_olddevs_init+0x0/0xa0 @ 1 initcall net_olddevs_init+0x0/0xa0 returned 0 after 5 usecs calling init_netconsole+0x0/0x206 @ 1 netconsole: local port 50000 netconsole: local IP 139.185.50.77 netconsole: interface eth0 netconsole: remote port 50000 netconsole: remote IP 139.185.50.76 netconsole: remote ethernet address 00:18:fe:34:1c:3d netconsole: device eth0 not up yet, forcing it alloc irq_desc for 69 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 69 for MSI/MSI-X bnx2: eth0: using MSI bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON netconsole: carrier detect appears untrustworthy, waiting 4 seconds bnx2: eth0 NIC SerDes Link is Down bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON Clocksource tsc unstable (delta = 4398045281281 ns) console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x206 returned 0 after 35029097 usecs calling cdrom_init+0x0/0xd @ 1 initcall cdrom_init+0x0/0xd returned 0 after 14 usecs calling mon_init+0x0/0x103 @ 1 initcall mon_init+0x0/0x103 returned 0 after 116 usecs calling ehci_hcd_init+0x0/0xc0 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7dd0000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-rc8 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected initcall ehci_hcd_init+0x0/0xc0 returned 0 after 459226 usecs calling ohci_hcd_mod_init+0x0/0x92 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7de0000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-rc8 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected initcall ohci_hcd_mod_init+0x0/0x92 returned 0 after 419121 usecs calling uhci_hcd_init+0x0/0xc1 @ 1 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: HCRESET not completed yet! uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-rc8 uhci_hcd usb usb3: SerialNumber: 0000:01:04.4 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected initcall uhci_hcd_init+0x0/0xc1 returned 0 after 353662 usecs calling i8042_init+0x0/0x3f9 @ 1 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3f9 returned 0 after 77208 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 1 usecs calling mousedev_init+0x0/0x62 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x62 returned 0 after 21566 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 119 usecs usb 3-1: new full speed USB device using uhci_hcd and address 2 calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 50 usecs calling psmouse_init+0x0/0x70 @ 1 initcall psmouse_init+0x0/0x70 returned 0 after 120 usecs calling xenkbd_init+0x0/0x44 @ 1 usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Virtual Keyboard usb 3-1: Manufacturer: HP usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs calling cmos_init+0x0/0x6d @ 1 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 usb 3-2: New USB device found, idVendor=03f0, idProduct=1327 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs initcall cmos_init+0x0/0x6d returned 0 after 69735 usecs calling dm_init+0x0/0x49 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x49 returned 0 after 746 usecs calling dm_snapshot_init+0x0/0x238 @ 1 initcall dm_snapshot_init+0x0/0x238 returned 0 after 371 usecs calling dm_mirror_init+0x0/0x79 @ 1 initcall dm_mirror_init+0x0/0x79 returned 0 after 101 usecs calling dm_dirty_log_init+0x0/0x59 @ 1 initcall dm_dirty_log_init+0x0/0x59 returned 0 after 1 usecs calling dm_zero_init+0x0/0x31 @ 1 initcall dm_zero_init+0x0/0x31 returned 0 after 0 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 2 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 1 usecs calling efivars_init+0x0/0x1f9 @ 1 initcall efivars_init+0x0/0x1f9 returned -19 after 0 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 102 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 33 usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after 42 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 32 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 37 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 32 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 32 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 32 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 32 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 32 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 32 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 32 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 36 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 36 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 32 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 32 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 32 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 32 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 33 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 33 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 45 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 32 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 32 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 32 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 32 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 38 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 32 usecs calling hid_init+0x0/0xc7 @ 1 usbcore: registered new interface driver hiddev input: HP Virtual Keyboard as /class/input/input2 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /class/input/input3 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0xc7 returned 0 after 11184 usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after 0 usecs calling flow_cache_init+0x0/0x187 @ 1 initcall flow_cache_init+0x0/0x187 returned 0 after 127 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs calling init_cgroup_cls+0x0/0x12 @ 1 initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs calling nf_conntrack_standalone_init+0x0/0x12 @ 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. initcall nf_conntrack_standalone_init+0x0/0x12 returned 0 after 368 usecs calling xt_init+0x0/0x129 @ 1 initcall xt_init+0x0/0x129 returned 0 after 7 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs calling conntrack_mt_init+0x0/0x17 @ 1 initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 usecs calling state_mt_init+0x0/0x17 @ 1 initcall state_mt_init+0x0/0x17 returned 0 after 0 usecs calling sysctl_ipv4_init+0x0/0x4e @ 1 initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 10 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 26 usecs calling ipv4_netfilter_init+0x0/0x17 @ 1 initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 1 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d @ 1 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d returned 0 after 19 usecs calling nf_defrag_init+0x0/0x17 @ 1 initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs calling ip_tables_init+0x0/0xaf @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xaf returned 0 after 19 usecs calling iptable_filter_init+0x0/0x6c @ 1 initcall iptable_filter_init+0x0/0x6c returned 0 after 40 usecs calling reject_tg_init+0x0/0x12 @ 1 initcall reject_tg_init+0x0/0x12 returned 0 after 0 usecs calling cubictcp_register+0x0/0x6e @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x6e returned 0 after 2 usecs calling xfrm_user_init+0x0/0x4d @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4d returned 0 after 13 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 12 usecs calling dsa_init_module+0x0/0x14 @ 1 initcall dsa_init_module+0x0/0x14 returned 0 after 1 usecs calling edsa_init_module+0x0/0x14 @ 1 initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs calling trailer_init_module+0x0/0x14 @ 1 initcall trailer_init_module+0x0/0x14 returned 0 after 1 usecs calling mv88e6060_init+0x0/0x14 @ 1 initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6123_61_65_init+0x0/0x14 @ 1 initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6131_init+0x0/0x14 @ 1 initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs calling dsa_init_module+0x0/0x12 @ 1 initcall dsa_init_module+0x0/0x12 returned 0 after 38 usecs calling dcbnl_init+0x0/0x32 @ 1 initcall dcbnl_init+0x0/0x32 returned 0 after 1 usecs calling mce_debugfs_init+0x0/0x3b @ 1 initcall mce_debugfs_init+0x0/0x3b returned 0 after 9 usecs calling severities_debugfs_init+0x0/0x3b @ 1 initcall severities_debugfs_init+0x0/0x3b returned 0 after 4 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 2 usecs calling update_mp_table+0x0/0x470 @ 1 initcall update_mp_table+0x0/0x470 returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x40 @ 1 initcall lapic_insert_resource+0x0/0x40 returned 0 after 1 usecs calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 59 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x29 @ 1 initcall pat_memtype_list_init+0x0/0x29 returned 0 after 4 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 4 usecs calling init_oops_id+0x0/0x36 @ 1 initcall init_oops_id+0x0/0x36 returned 0 after 2 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 initcall pm_qos_power_init+0x0/0x61 returned 0 after 132 usecs calling software_resume+0x0/0x1f1 @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1f1 returned -2 after 1 usecs initcall software_resume+0x0/0x1f1 returned with error code -2 calling debugfs_kprobe_init+0x0/0x8e @ 1 initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 10 usecs calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 28 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling init_ima+0x0/0x1a @ 1 No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x1a returned 0 after 140 usecs calling random32_reseed+0x0/0x92 @ 1 initcall random32_reseed+0x0/0x92 returned 0 after 16 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 3 usecs calling pci_sysfs_init+0x0/0x4c @ 1 initcall pci_sysfs_init+0x0/0x4c returned 0 after 623 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs calling regulator_init_complete+0x0/0x136 @ 1 initcall regulator_init_complete+0x0/0x136 returned 0 after 1 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 11 usecs calling late_resume_init+0x0/0xf9 @ 1 Magic number: 5:785:172 net eth0: hash matches initcall late_resume_init+0x0/0xf9 returned 0 after 79 usecs calling scsi_complete_async_scans+0x0/0xfe @ 1 initcall scsi_complete_async_scans+0x0/0xfe returned 0 after 0 usecs calling rtc_hctosys+0x0/0x167 @ 1 rtc_cmos rtc_cmos: setting system clock to 2009-12-01 10:11:52 UTC (1259662312) usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: Virtual Hub usb 3-2: Manufacturer: HP usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected initcall rtc_hctosys+0x0/0x167 returned 0 after 4608495 usecs calling memmap_init+0x0/0xa3 @ 1 initcall memmap_init+0x0/0xa3 returned 0 after 113 usecs calling pci_mmcfg_late_insert_resources+0x0/0x171 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x171 returned 0 after 4 usecs calling init_net_drop_monitor+0x0/0x147 @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0x147 returned 0 after 11723 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs async_waiting @ 1 async_continuing @ 1 after 0 usec Freeing unused kernel memory: 936k freed Write protecting the kernel read-only data: 6596k calling cciss_init+0x0/0xa3 [cciss] @ 89 HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 54 alloc irq_desc for 54 on node 1 alloc kstat_irqs on node 1 cciss 0000:42:08.0: PCI INT A -> Link[LNKA] -> GSI 54 (level, high) -> IRQ 54 alloc irq_desc for 70 on node 1 alloc kstat_irqs on node 1 cciss 0000:42:08.0: irq 70 for MSI/MSI-X IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x3238> at PCI 0000:42:08.0 IRQ 70 using DAC cciss/c0d0: p1 p2 p3 p4 cciss/c0d1: p1 p2 initcall cciss_init+0x0/0xa3 [cciss] returned 0 after 222660 usecs EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. calling shpcd_init+0x0/0x68 [shpchp] @ 297 calling edac_init+0x0/0xcf [edac_core] @ 319 EDAC MC: Ver: 2.1.0 Nov 30 2009 EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x68 [shpchp] returned 0 after 160026 usecs EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 305 initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 16 usecs calling init_soundcore+0x0/0x8b [soundcore] @ 305 initcall init_soundcore+0x0/0x8b [soundcore] returned 0 after 45 usecs calling alsa_sound_init+0x0/0x8f [snd] @ 305 initcall alsa_sound_init+0x0/0x8f [snd] returned 0 after 81 usecs calling k8temp_init+0x0/0x20 [k8temp] @ 337 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 initcall k8temp_init+0x0/0x20 [k8temp] returned 0 after 9557 usecs calling alsa_timer_init+0x0/0x187 [snd_timer] @ 305 initcall alsa_timer_init+0x0/0x187 [snd_timer] returned 0 after 93 usecs calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 688 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 16 usecs calling alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] @ 731 initcall alsa_mixer_oss_init+0x0/0x3a [snd_mixer_oss] returned 0 after 1 usecs calling alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] @ 731 initcall alsa_pcm_oss_init+0x0/0xa5 [snd_pcm_oss] returned 0 after 1 usecs calling floppy_module_init+0x0/0xd73 [floppy] @ 691 Floppy drive(s): fd0 is 1.44M calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 758 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 12 usecs calling alsa_seq_init+0x0/0x57 [snd_seq] @ 781 initcall alsa_seq_init+0x0/0x57 [snd_seq] returned 0 after 126 usecs calling alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] @ 781 initcall alsa_seq_midi_event_init+0x0/0x8 [snd_seq_midi_event] returned 0 after 0 usecs calling alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] @ 781 calling scsi_tgt_init+0x0/0x82 [scsi_tgt] @ 782 initcall scsi_tgt_init+0x0/0x82 [scsi_tgt] returned 0 after 5856 usecs calling fc_transport_init+0x0/0x4c [scsi_transport_fc] @ 765 initcall fc_transport_init+0x0/0x4c [scsi_transport_fc] returned 0 after 120 usecs calling alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] @ 948 initcall alsa_seq_dummy_init+0x0/0xcd [snd_seq_dummy] returned 0 after 13 usecs initcall alsa_seq_oss_init+0x0/0x19e [snd_seq_oss] returned 0 after 119301 usecs calling pcsp_init+0x0/0x20 [snd_pcsp] @ 305 input: PC Speaker as /class/input/input4 initcall pcsp_init+0x0/0x20 [snd_pcsp] returned 0 after 1616 usecs calling pcspkr_init+0x0/0x12 [pcspkr] @ 305 Error: Driver 'pcspkr' is already registered, aborting... initcall pcspkr_init+0x0/0x12 [pcspkr] returned -16 after 4 usecs initcall pcspkr_init+0x0/0x12 [pcspkr] returned with error code -16 calling tg3_init+0x0/0x20 [tg3] @ 1177 tg3.c:v3.102 (September 1, 2009) ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 19 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 tg3 0000:07:04.0: PCI INT A -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 calling lpfc_init+0x0/0xd3 [lpfc] @ 782 Emulex LightPulse Fibre Channel SCSI driver 8.3.4 Copyright(c) 2004-2009 Emulex. All rights reserved. EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 18 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 lpfc 0000:08:00.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 lpfc 0000:08:00.0: setting latency timer to 64 calling serio_raw_init+0x0/0x20 [serio_raw] @ 1292 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 52 usecs EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() eth2: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:2f eth2: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0]) eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth2: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:07:04.1: PCI INT B -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 scsi0 : on PCI bus 08 device 00 irq 18 eth3: Tigon3 [partno(011276-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:18:fe:34:1c:30 eth3: attached PHY is 5714 (1000Base-SX Ethernet) (WireSpeed[0]) eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth3: dma_rwctrl[76148000] dma_mask[40-bit] initcall tg3_init+0x0/0x20 [tg3] returned 0 after 688469 usecs EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() calling i2c_init+0x0/0x70 [i2c_core] @ 1304 initcall i2c_init+0x0/0x70 [i2c_core] returned 0 after 98 usecs calling hpwdt_init+0x0/0x20 [hpwdt] @ 1298 calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1308 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 61 usecs hpwdt 0000:01:04.0: NMI sourcing is disabled. To enable this functionality you must reboot with nmi_watchdog=0 and load the hpwdt driver with priority=1. hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 calling init_ipmi_si+0x0/0x78c [ipmi_si] @ 1308 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 hpwdt: New timer passed in is 30 seconds. EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_pci_sysfs.c, line at 537: edac_pci_dev_parity_clear() EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 905: edac_sysfs_setup_mc_kset() EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 922: edac_sysfs_setup_mc_kset() Registered '.../edac/mc' kobject initcall edac_init+0x0/0xcf [edac_core] returned 0 after 2361742 usecs ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface floppy0: no floppy controllers found initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2940571 usecs calling amd64_edac_init+0x0/0x1268 [amd64_edac_mod] @ 319 EDAC amd64_edac: Ver: 3.2.0 Dec 1 2009 hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3056: (MC node=0,mc_type='RevF') initcall hpwdt_init+0x0/0x20 [hpwdt] returned 0 after 1941721 usecs calling init_ipmi_devintf+0x0/0x106 [ipmi_devintf] @ 1561 ipmi device interface initcall init_ipmi_devintf+0x0/0x106 [ipmi_devintf] returned 0 after 134 usecs EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:18.1 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:18.2 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:18.3 EDAC amd64: ECC is enabled by BIOS. get_cpus_on_this_dct_cpumask: nid: 0, cpu: 0 get_cpus_on_this_dct_cpumask: nid: 0, cpu: 2 amd64_nb_mce_bank_enabled_on_node: weight: 2 ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 16 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 0, MCG_CTL: 0x1f, NB MSR is enabled EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 2, MCG_CTL: 0x0, NB MSR is disabled EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3065: ret=-22 amd64_edac: probe of 0000:00:18.2 failed with error -22 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3056: (MC node=1,mc_type='RevF') EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2365: Addr Map device PCI Bus ID: 0000:00:19.1 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2367: DRAM MEM-CTL PCI Bus ID: 0000:00:19.2 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2369: Misc device PCI Bus ID: 0000:00:19.3 EDAC amd64: ECC is enabled by BIOS. get_cpus_on_this_dct_cpumask: nid: 1, cpu: 1 calling drm_core_init+0x0/0x129 [drm] @ 1304 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x129 [drm] returned 0 after 96 usecs get_cpus_on_this_dct_cpumask: nid: 1, cpu: 3 amd64_nb_mce_bank_enabled_on_node: weight: 2 EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 1, MCG_CTL: 0x1f, NB MSR is enabled EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 2787: core: 3, MCG_CTL: 0x0, NB MSR is disabled EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 1 to enable. calling ttm_init+0x0/0x6f [ttm] @ 1304 initcall ttm_init+0x0/0x6f [ttm] returned 0 after 45 usecs EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. EDAC DEBUG: in drivers/edac/amd64_edac.c, line at 3065: ret=-22 amd64_edac: probe of 0000:00:19.2 failed with error -22 initcall amd64_edac_init+0x0/0x1268 [amd64_edac_mod] returned 0 after 1346822 usecs IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 16 lpfc 0000:08:00.1: PCI INT B -> Link[LNKZ] -> GSI 19 (level, high) -> IRQ 19 lpfc 0000:08:00.1: setting latency timer to 64 scsi1 : on PCI bus 08 device 01 irq 19 calling radeon_init+0x0/0xc5 [radeon] @ 1304 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized initcall init_ipmi_si+0x0/0x78c [ipmi_si] returned 0 after 3563382 usecs radeon 0000:01:03.0: PCI INT A -> Link[LNKY] -> GSI 18 (level, high) -> IRQ 18 [drm] radeon: Initializing kernel modesetting. lpfc 0000:08:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 [drm] register mmio base: 0xF7FF0000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] radeon: VRAM 64M [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=64M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 4097704 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [drm] radeon: 32M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: cp idle (0x00008080) [drm] Loading R100 Microcode platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs scsi 0:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:0:0: Attached scsi generic sg0 type 12 scsi 0:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 0:0:1:0: Attached scsi generic sg1 type 12 scsi 0:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 0:0:1:8: Attached scsi generic sg2 type 0 scsi 0:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 scsi 0:0:2:0: Attached scsi generic sg3 type 13 sd 0:0:1:8: [sda] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) sd 0:0:1:8: [sda] Write Protect is off sd 0:0:1:8: [sda] Mode Sense: 83 00 00 08 sd 0:0:1:8: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:1:8: [sda] Attached SCSI disk [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: calling enclosure_init+0x0/0x19 [enclosure] @ 1937 initcall enclosure_init+0x0/0x19 [enclosure] returned 0 after 39 usecs calling ses_init+0x0/0x40 [ses] @ 1937 ses 0:0:2:0: Attached Enclosure device initcall ses_init+0x0/0x40 [ses] returned 0 after 90 usecs [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] VGA [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 1920000 [drm] fb depth is 24 [drm] pitch is 3200 [drm] DAC-8: set mode 800x600 19 initcall lpfc_init+0x0/0xd3 [lpfc] returned 0 after 6279755 usecs Console: switching to colour frame buffer device 100x37 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:03.0 on minor 0 lpfc 0000:08:00.1: 1:1303 Link Up Event x1 received Data: x1 xf7 x10 x2 x0 x0 0 initcall radeon_init+0x0/0xc5 [radeon] returned 0 after 2241593 usecs scsi 1:0:0:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:0:0: Attached scsi generic sg4 type 12 scsi 1:0:1:0: RAID COMPAQ MSA1000 5.20 PQ: 0 ANSI: 4 scsi 1:0:1:0: Attached scsi generic sg5 type 12 scsi 1:0:1:8: Direct-Access COMPAQ MSA1000 VOLUME 5.20 PQ: 0 ANSI: 4 sd 1:0:1:8: Attached scsi generic sg6 type 0 sd 1:0:1:8: [sdb] 2187605616 512-byte logical blocks: (1.12 TB/1.01 TiB) sd 1:0:1:8: [sdb] Write Protect is off sd 1:0:1:8: [sdb] Mode Sense: 83 00 00 08 sd 1:0:1:8: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 scsi 1:0:2:0: Enclosure HP MSA2212fc J200 PQ: 0 ANSI: 5 sd 1:0:1:8: [sdb] Attached SCSI disk ses 1:0:2:0: Attached Enclosure device ses 1:0:2:0: Attached scsi generic sg7 type 13 calling floppy_module_init+0x0/0xd73 [floppy] @ 2406 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found initcall floppy_module_init+0x0/0xd73 [floppy] returned -19 after 2984942 usecs calling parport_default_proc_register+0x0/0x1b [parport] @ 2415 initcall parport_default_proc_register+0x0/0x1b [parport] returned 0 after 12 usecs calling lp_init_module+0x0/0x274 [lp] @ 2417 calling parport_pc_init+0x0/0x357 [parport_pc] @ 2420 initcall parport_pc_init+0x0/0x357 [parport_pc] returned 0 after 756 usecs lp: driver loaded but no devices found initcall lp_init_module+0x0/0x274 [lp] returned 0 after 131211 usecs calling acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] @ 2452 initcall acpi_memory_device_init+0x0/0x7a [acpi_memhotplug] returned 0 after 5828 usecs calling acpi_smb_hc_init+0x0/0x18 [sbshc] @ 2457 initcall acpi_smb_hc_init+0x0/0x18 [sbshc] returned 0 after 69 usecs calling acpi_sbs_init+0x0/0x4f [sbs] @ 2464 initcall acpi_sbs_init+0x0/0x4f [sbs] returned 0 after 82 usecs calling video_output_class_init+0x0/0x19 [output] @ 2470 initcall video_output_class_init+0x0/0x19 [output] returned 0 after 42 usecs calling acpi_video_init+0x0/0x70 [video] @ 2470 initcall acpi_video_init+0x0/0x70 [video] returned 0 after 156 usecs md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3 FS on cciss/c0d0p3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Can't find ext3 filesystem on dev cciss/c0d0p4. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on cciss/c0d1p2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. Adding 8385920k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:8385920k warning: process `kudzu' used the deprecated sysctl system call with 1.23. calling inet6_init+0x0/0x2b2 [ipv6] @ 2687 NET: Registered protocol family 10 lo: Disabled Privacy Extensions initcall inet6_init+0x0/0x2b2 [ipv6] returned 0 after 49133 usecs process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. calling init_sunrpc+0x0/0x5d [sunrpc] @ 3099 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x5d [sunrpc] returned 0 after 93465 usecs warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) calling rfkill_init+0x0/0x79 [rfkill] @ 3159 initcall rfkill_init+0x0/0x79 [rfkill] returned 0 after 138 usecs calling bt_init+0x0/0x5d [bluetooth] @ 3159 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x5d [bluetooth] returned 0 after 113160 usecs calling l2cap_init+0x0/0xe5 [l2cap] @ 3182 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized initcall l2cap_init+0x0/0xe5 [l2cap] returned 0 after 15 usecs calling rfcomm_init+0x0/0xd4 [rfcomm] @ 3182 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 initcall rfcomm_init+0x0/0xd4 [rfcomm] returned 0 after 79610 usecs calling init_rpcsec_gss+0x0/0x4d [auth_rpcgss] @ 3209 initcall init_rpcsec_gss+0x0/0x4d [auth_rpcgss] returned 0 after 39 usecs calling fscache_init+0x0/0xab [fscache] @ 3209 Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded initcall fscache_init+0x0/0xab [fscache] returned 0 after 56195 usecs calling init_nlm+0x0/0x22 [lockd] @ 3209 initcall init_nlm+0x0/0x22 [lockd] returned 0 after 9 usecs calling init_nfs_fs+0x0/0x139 [nfs] @ 3209 FS-Cache: Netfs 'nfs' registered for caching initcall init_nfs_fs+0x0/0x139 [nfs] returned 0 after 31224 usecs svc: failed to register lockdv1 RPC service (errno 97). VFS: Can't find ext3 filesystem on dev cciss/c0d0p4. SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount force-fb(V) show-blocked-tasks(W) dump-ftrace-buffer(Z) calling hidp_init+0x0/0x60 [hidp] @ 3288 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 initcall hidp_init+0x0/0x60 [hidp] returned 0 after 14569 usecs calling init_autofs4_fs+0x0/0x26 [autofs4] @ 3302 initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 96 usecs eth0: no IPv6 routers present rport-0:0-19: blocked FC remote port time out: removing rport rport-1:0-20: blocked FC remote port time out: removing rport