| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <web-100877149@zbackend1.aha.ru>
Date: Thu, 03 Dec 2009 03:40:29 -0400
From: "werner" <w.landgraf@...ru>
To: linux-kernel@...r.kernel.org
Subject: kernel problem
problem during booting with 2.6.32-rc8-git5, whole dmesg
below
w.landgraf@...ru
------------[ cut here ]------------
WARNING: at mm/page_alloc.c:1805
__alloc_pages_nodemask+0x127/0x48f()
Hardware name: System Product Name
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-rc8-git5 #1
Call Trace:
[<c103d94b>] warn_slowpath_common+0x65/0x95
[<c103d98d>] warn_slowpath_null+0x12/0x15
[<c109550c>] __alloc_pages_nodemask+0x127/0x48f
[<c10be964>] ? get_slab+0x8/0x50
[<c10b8979>] alloc_page_interleave+0x2e/0x6e
[<c10b8a10>] alloc_pages_current+0x57/0x99
[<c2083a4a>] ? xd_init+0x0/0x482
[<c1094c38>] __get_free_pages+0xd/0x1e
[<c2083a94>] xd_init+0x4a/0x482
[<c2082df0>] ? loop_init+0x104/0x16a
[<c169162d>] ? loop_probe+0x0/0xaf
[<c2083a4a>] ? xd_init+0x0/0x482
[<c1001143>] do_one_initcall+0x51/0x13f
[<c204a307>] kernel_init+0x10b/0x15f
[<c204a1fc>] ? kernel_init+0x0/0x15f
[<c1004347>] kernel_thread_helper+0x7/0x10
---[ end trace 686db6333ade6e7a ]---
===========================================
Linux version 2.6.32-rc8-git5 (root@...ner) (gcc version
4.3.3 (GCC) ) #1 SMP Thu Dec 3 04:14:36 GFT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI
NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI
data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000
(reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000
(reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working
around it.
e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
last_pfn = 0x240000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 0100000000 mask FF00000000 write-back
3 base 0200000000 mask FFC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000
(usable) ==> (reserved)
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bfee0000 (usable)
modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
modified: 00000000bfee3000 - 00000000bfef0000 (ACPI
data)
modified: 00000000bfef0000 - 00000000bff00000 (reserved)
modified: 00000000f0000000 - 00000000f4000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000240000000 (usable)
initial memory mapped : 0 - 02600000
init_memory_mapping: 0000000000000000-00000000377fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037600000 page 2M
0037600000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-17000
ACPI: RSDP 000f6fd0 00024 (v02 Nvidia)
ACPI: XSDT bfee30c0 0003C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
ACPI: FACP bfeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31
AWRD 00000000)
ACPI: DSDT bfee3240 08581 (v01 NVIDIA ASUSACPI 00001000
MSFT 03000000)
ACPI: FACS bfee0000 00040
ACPI: MCFG bfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
ACPI: APIC bfeeb980 0007C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
found SMP MP-table at [c00f5440] f5440
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Warning! Not a NUMA-Q system!
could not find any ACPI SRAT memory areas.
failed to get NUMA memory information from SRAT table
NUMA - single node, flat memory mode
Node: 0, start_pfn: 0, end_pfn: 240000
Setting physnode_map array to node 0 for pfns:
0 4000 8000 c000 10000 14000 18000 1c000 20000 24000
28000 2c000 30000 34000 38000 3c000 40000 44000 48000
4c000 50000 54000 58000 5c000 60000 64000 68000 6c000
70000 74000 78000 7c000 80000 84000 88000 8c000 90000
94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000
b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000
dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000
100000 104000 108000 10c000 110000 114000 118000 11c000
120000 124000 128000 12c000 130000 134000 138000 13c000
140000 144000 148000 14c000 150000 154000 158000 15c000
160000 164000 168000 16c000 170000 174000 178000 17c000
180000 184000 188000 18c000 190000 194000 198000 19c000
1a0000 1a4000 1a8000 1ac000 1b0000 1b4000 1b8000 1bc000
1c0000 1c4000 1c8000 1cc000 1d0000 1d4000 1d8000 1dc000
1e0000 1e4000 1e8000 1ec000 1f0000 1f4000 1f8000 1fc000
200000 204000 208000 20c000 210000 214000 218000 21c000
220000 224000 228000 22c000 230000 234000 238000 23c000
node 0 pfn: [0 - 240000]
Reserving 18944 pages of KVA for lmem_map of node 0 at
23b600
remove_active_range (0, 2340352, 2359296)
Reserving total of 4a00 pages for numa KVA remap
kva_start_pfn ~ 32c00 max_low_pfn ~ 377fe
max_pfn = 240000
8328MB HIGHMEM available.
887MB LOWMEM available.
max_low_pfn = 377fe, highstart_pfn = 377fe
Low memory ends at vaddr f77fe000
node 0 will remap to vaddr f2c00000 - f7600000
allocate_pgdat: node 0 NODE_DATA f2c00000
remap_numa_kva: node 0
remap_numa_kva: f2c00000 to pfn 0023b600
remap_numa_kva: f2e00000 to pfn 0023b800
remap_numa_kva: f3000000 to pfn 0023ba00
remap_numa_kva: f3200000 to pfn 0023bc00
remap_numa_kva: f3400000 to pfn 0023be00
remap_numa_kva: f3600000 to pfn 0023c000
remap_numa_kva: f3800000 to pfn 0023c200
remap_numa_kva: f3a00000 to pfn 0023c400
remap_numa_kva: f3c00000 to pfn 0023c600
remap_numa_kva: f3e00000 to pfn 0023c800
remap_numa_kva: f4000000 to pfn 0023ca00
remap_numa_kva: f4200000 to pfn 0023cc00
remap_numa_kva: f4400000 to pfn 0023ce00
remap_numa_kva: f4600000 to pfn 0023d000
remap_numa_kva: f4800000 to pfn 0023d200
remap_numa_kva: f4a00000 to pfn 0023d400
remap_numa_kva: f4c00000 to pfn 0023d600
remap_numa_kva: f4e00000 to pfn 0023d800
remap_numa_kva: f5000000 to pfn 0023da00
remap_numa_kva: f5200000 to pfn 0023dc00
remap_numa_kva: f5400000 to pfn 0023de00
remap_numa_kva: f5600000 to pfn 0023e000
remap_numa_kva: f5800000 to pfn 0023e200
remap_numa_kva: f5a00000 to pfn 0023e400
remap_numa_kva: f5c00000 to pfn 0023e600
remap_numa_kva: f5e00000 to pfn 0023e800
remap_numa_kva: f6000000 to pfn 0023ea00
remap_numa_kva: f6200000 to pfn 0023ec00
remap_numa_kva: f6400000 to pfn 0023ee00
remap_numa_kva: f6600000 to pfn 0023f000
remap_numa_kva: f6800000 to pfn 0023f200
remap_numa_kva: f6a00000 to pfn 0023f400
remap_numa_kva: f6c00000 to pfn 0023f600
remap_numa_kva: f6e00000 to pfn 0023f800
remap_numa_kva: f7000000 to pfn 0023fa00
remap_numa_kva: f7200000 to pfn 0023fc00
remap_numa_kva: f7400000 to pfn 0023fe00
High memory starts at vaddr f77fe000
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00014000 - 0001af00
(10 early reservations) ==> bootmem [0000000000 -
00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
#3 [0001000000 - 0002217fa8] TEXT DATA BSS ==>
[0001000000 - 0002217fa8]
#4 [000009f000 - 0000100000] BIOS reserved ==>
[000009f000 - 0000100000]
#5 [0002218000 - 000222b14d] BRK ==>
[0002218000 - 000222b14d]
#6 [0000010000 - 0000014000] PGTABLE ==>
[0000010000 - 0000014000]
#7 [023b600000 - 0240000000] KVA RAM
#8 [0032c00000 - 0037600000] KVA PG ==>
[0032c00000 - 0037600000]
#9 [0000014000 - 000001b000] BOOTMAP ==>
[0000014000 - 000001b000]
found SMP MP-table at [c00f5440] f5440
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x00240000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bfee0
0: 0x00100000 -> 0x0023b600
On node 0 totalpages: 2077807
free_area_init_node: node 0, pgdat f2c00000, node_mem_map
f2c02200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 16509 pages used for memmap
HighMem zone: 1834085 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: No APIC-table, disabling MPS
SFI: Simple Firmware Interface v0.7
http://simplefirmware.org
SMP: Allowing 1 CPUs, 0 hotplug CPUs
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
Allocating PCI resources starting at bff00000 (gap:
bff00000:30100000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:16
PERCPU: Embedded 14 pages/cpu @c2400000 s35128 r0 d22216
u2097152
pcpu-alloc: s35128 r0 d22216 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2059522
Policy zone: HighMem
Kernel command line: BOOT_IMAGE=2632rc8git5 ro root=801 4
root=/dev/sda1 devfs=nomount noapic nolapic acpi=ht
rootwait
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0023b600)
Memory: 8215892k/9437184k available (12244k kernel code,
95336k reserved, 4434k data, 852k init, 7402376k highmem)
virtual kernel memory layout:
fixmap : 0xffd55000 - 0xfffff000 (2728 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc204a000 - 0xc211f000 ( 852 kB)
.data : 0xc1bf50d9 - 0xc2049bc8 (4434 kB)
.text : 0xc1000000 - 0xc1bf50d9 (12244 kB)
Checking if this processor honours the WP bit even in
supervisor mode...Ok.
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=16
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2511.710 MHz processor.
Calibrating delay loop (skipped), value calculated using
timer frequency.. 5023.42 BogoMIPS (lpj=2511710)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 41k freed
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Mapping cpu 0 to node 0
Apic disabled
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Mapping cpu 0 to node 0
Brought up 1 CPUs
Total of 1 processors activated (5023.42 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function:
pIII_sse
pIII_sse : 6784.000 MB/sec
xor: using function: pIII_sse (6784.000 MB/sec)
regulator: core version 0.5
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 3.00 entry at 0xf1e10, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 640 MB/s
raid6: int32x2 863 MB/s
raid6: int32x4 730 MB/s
raid6: int32x8 554 MB/s
raid6: mmxx1 2050 MB/s
raid6: mmxx2 3722 MB/s
raid6: sse1x1 1949 MB/s
raid6: sse1x2 3285 MB/s
raid6: sse2x1 3347 MB/s
raid6: sse2x2 4332 MB/s
raid6: using algorithm sse2x2 (4332 MB/s)
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio:
[0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio:
[0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio:
[0xfe024000-0xfe027fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:07.0: reg 10 32bit mmio:
[0xfe02d000-0xfe02dfff]
pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f]
pci 0000:00:08.0: reg 24 32bit mmio:
[0xfe02c000-0xfe02cfff]
pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7]
pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3]
pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:08.1: reg 24 32bit mmio:
[0xfe02b000-0xfe02bfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:08.0: reg 10 io port: [0xbc00-0xbcff]
pci 0000:01:08.0: reg 14 32bit mmio: [0x000000-0x0000ff]
pci 0000:01:08.0: reg 30 32bit mmio pref:
[0x000000-0x00ffff]
pci 0000:00:04.0: transparent bridge
pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:04.0: bridge 32bit mmio:
[0xfdf00000-0xfdffffff]
pci 0000:00:04.0: bridge 32bit mmio pref:
[0xfde00000-0xfdefffff]
pci 0000:02:00.0: reg 10 64bit mmio pref:
[0xe0000000-0xefffffff]
pci 0000:02:00.0: reg 18 64bit mmio:
[0xfddf0000-0xfddfffff]
pci 0000:02:00.0: reg 20 io port: [0xac00-0xacff]
pci 0000:02:00.0: reg 30 32bit mmio pref:
[0xfddc0000-0xfdddffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10 64bit mmio:
[0xfdde0000-0xfddeffff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
pci 0000:00:09.0: bridge 32bit mmio:
[0xfdd00000-0xfddfffff]
pci 0000:00:09.0: bridge 64bit mmio pref:
[0xe0000000-0xefffffff]
pci 0000:03:00.0: reg 24 32bit mmio:
[0xfdcfe000-0xfdcfffff]
pci 0000:03:00.0: reg 30 32bit mmio pref:
[0xfdce0000-0xfdceffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0x9c00-0x9c07]
pci 0000:03:00.1: reg 14 io port: [0x9800-0x9803]
pci 0000:03:00.1: reg 18 io port: [0x9400-0x9407]
pci 0000:03:00.1: reg 1c io port: [0x9000-0x9003]
pci 0000:03:00.1: reg 20 io port: [0x8c00-0x8c0f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
pci 0000:00:0b.0: bridge io port: [0x8000-0x9fff]
pci 0000:00:0b.0: bridge 32bit mmio:
[0xfdc00000-0xfdcfffff]
pci 0000:00:0b.0: bridge 64bit mmio pref:
[0xfdb00000-0xfdbfffff]
pci 0000:00:0c.0: bridge io port: [0x7000-0x7fff]
pci 0000:00:0c.0: bridge 32bit mmio:
[0xfda00000-0xfdafffff]
pci 0000:00:0c.0: bridge 64bit mmio pref:
[0xfd900000-0xfd9fffff]
vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:00.0: default IRQ router [10de:03ea]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at
0xc00fc6b0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc6e0, dseg
0xf0000
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by
driver
system 00:07: iomem range 0x0-0x9ffff could not be
reserved
system 00:07: iomem range
0xfffffffffffe0000-0xffffffffffffffff has been reserved
system 00:07: iomem range
0xfffffffffec00000-0xfffffffffec0ffff has been reserved
system 00:07: iomem range
0xfffffffffee00000-0xfffffffffeefffff has been reserved
system 00:07: iomem range
0xfffffffffefff000-0xfffffffffefff3ff has been reserved
system 00:07: iomem range 0x100000-0xffffff could not be
reserved
system 00:08: iomem range 0xf0000-0xf3fff could not be
reserved
system 00:08: iomem range 0xf4000-0xf7fff could not be
reserved
system 00:08: iomem range 0xf8000-0xfffff could not be
reserved
system 00:08: iomem range 0xd2800-0xd3fff has been
reserved
pci 0000:01:08.0: BAR 1: error updating (0xfdf00000 !=
0xf9f00000)
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: 0xb000-0xbfff
pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:04.0: PREFETCH window: 0xfde00000-0xfdefffff
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xa000-0xafff
pci 0000:00:09.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:09.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: 0x8000-0x9fff
pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:0b.0: PREFETCH window:
0x000000fdb00000-0x000000fdbfffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: 0x7000-0x7fff
pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff
pci 0000:00:0c.0: PREFETCH window:
0x000000fd900000-0x000000fd9fffff
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 pref mem
[0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem:
[0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 pref mem
[0xe0000000-0xefffffff]
pci_bus 0000:03: resource 0 io: [0x8000-0x9fff]
pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 pref mem
[0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
pci_bus 0000:04: resource 2 pref mem
[0xfd900000-0xfd9fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
TCP: Hash tables configured (established 131072 bind
65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:02:00.0: Boot video device
Machine check injector initialized
elanfreq: error: no Elan processor found!
cpufreq-nforce2: No nForce2 chipset.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
scx200: NatSemi SCx200 Driver
microcode: CPU0: AMD CPU family 0xf not supported
Microcode Update Driver: v2.00
<tigran@...azian.fsnet.co.uk>, Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1259814914.268:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built Dec 3 2009 03:09:28) installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
fuse init (API version 7.13)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
GFS2 (built Dec 3 2009 03:11:14) installed
msgmni has been set to 1588
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version:
0.9.8
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
pciehp: PCI Express Hot Plug Controller Driver version:
0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version:
0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug
Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
mdacon: MDA with 8K of memory detected.
Console: switching consoles 13-16 to MDA-2
VIA Graphics Intergration Chipset framebuffer 2.4
initializing
vmlfb: initializing
Could not find Carillo Ranch MCH device.
no IO addresses supplied
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and
executable
uvesafb: Getting VBE info block failed (eax=0x4f00,
err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vesafb: framebuffer at 0xe0000000, mapped to 0xf8580000,
using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:a2da
vesafb: pmi: set display start = c00ca362, set palette =
c00ca41e
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
toshiba: not a supported Toshiba laptop
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
pci 0000:02:00.0: setting latency timer to 64
[drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0
on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport_pc 00:0d: reported by Plug and Play BIOS
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
------------[ cut here ]------------
WARNING: at mm/page_alloc.c:1805
__alloc_pages_nodemask+0x127/0x48f()
Hardware name: System Product Name
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-rc8-git5 #1
Call Trace:
[<c103d94b>] warn_slowpath_common+0x65/0x95
[<c103d98d>] warn_slowpath_null+0x12/0x15
[<c109550c>] __alloc_pages_nodemask+0x127/0x48f
[<c10be964>] ? get_slab+0x8/0x50
[<c10b8979>] alloc_page_interleave+0x2e/0x6e
[<c10b8a10>] alloc_pages_current+0x57/0x99
[<c2083a4a>] ? xd_init+0x0/0x482
[<c1094c38>] __get_free_pages+0xd/0x1e
[<c2083a94>] xd_init+0x4a/0x482
[<c2082df0>] ? loop_init+0x104/0x16a
[<c169162d>] ? loop_probe+0x0/0xaf
[<c2083a4a>] ? xd_init+0x0/0x482
[<c1001143>] do_one_initcall+0x51/0x13f
[<c204a307>] kernel_init+0x10b/0x15f
[<c204a1fc>] ? kernel_init+0x0/0x15f
[<c1004347>] kernel_thread_helper+0x7/0x10
---[ end trace 686db6333ade6e7a ]---
xd: Out of memory.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
MM: desc_per_page = 128
nbd: registered device at major 43
usbcore: registered new interface driver ub
ibmasm: IBM ASM Service Processor Driver version 1.0
loaded
Phantom Linux Driver, version n0.9.8, init OK
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo
Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360
bytes total)
input: Macintosh mouse button emulation as
/devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev
0xa2)
amd74xx 0000:00:06.0: IDE port disabled
amd74xx 0000:00:06.0: BIOS didn't set cable bits
correctly. Enabling workaround.
amd74xx 0000:00:06.0: not 100% native mode: will probe
irqs later
ide0: BM-DMA at 0xf000-0xf007
Probing IDE interface ide0...
hda: Hitachi HDT725050VLAT80, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/133 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev
0x03)
JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
JMicron IDE 0000:03:00.1: can't find IRQ for PCI INT B;
please try using pci=biosirq
jmicron 0000:03:00.1: bad irq (0): will probe later
JMicron IDE 0000:03:00.1: setting latency timer to 64
ide1: BM-DMA at 0x8c00-0x8c07
ide2: BM-DMA at 0x8c08-0x8c0f
Probing IDE interface ide1...
Probing IDE interface ide2...
ide1: disabled, no IRQ
ide1: failed to initialize IDE interface
ide1: disabling port
ide2: disabled, no IRQ
ide2: failed to initialize IDE interface
ide2: disabling port
JMicron IDE: probe of 0000:03:00.1 failed with error -1
ide_generic: please use "probe_mask=0x3f" module parameter
for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 976773168 sectors (500107 MB) w/7372KiB Cache,
CHS=60801/255/63
hda: cache flushes supported
hda: hda2 hda3 hda4
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2461]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3
loaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address
and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.01-k6
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.4
Copyright(c) 2004-2009 Emulex. All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get
problems load
with "disable_clustering=1" and report to
maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03
EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST
2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
mpt2sas version 02.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux
v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux
v2.26.02.012.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3
(June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.3
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1e (June 22,
2009)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp
$
SCSI Media Changer driver v0.25
osd: LOADED open-osd 0.1.0
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps
0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio
slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@...dcfe000 port
0xfdcfe100 irq 5
ata2: SATA max UDMA/133 abar m8192@...dcfe000 port
0xfdcfe180 irq 5
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800
irq 10
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808
irq 10
sata_nv 0000:00:08.1: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400
irq 11
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408
irq 11
pata_jmicron 0000:03:00.1: BAR 0: can't reserve I/O region
[0x9c00-0x9c07]
pata_jmicron 0000:03:00.1: failed to request/iomap BARs
for port 0 (errno=-16)
pata_jmicron 0000:03:00.1: BAR 2: can't reserve I/O region
[0x9400-0x9407]
pata_jmicron 0000:03:00.1: failed to request/iomap BARs
for port 1 (errno=-16)
pata_jmicron 0000:03:00.1: no available native port
Error: Driver 'pata_platform' is already registered,
aborting...
pata_acpi 0000:03:00.1: BAR 0: can't reserve I/O region
[0x9c00-0x9c07]
pata_acpi 0000:03:00.1: failed to request/iomap BARs for
port 0 (errno=-16)
pata_acpi 0000:03:00.1: BAR 2: can't reserve I/O region
[0x9400-0x9407]
pata_acpi 0000:03:00.1: failed to request/iomap BARs for
port 1 (errno=-16)
pata_acpi 0000:03:00.1: no available native port
SSFDC read-only Flash Translation layer
L440GX flash mapping: failed to find PIIX4 ISA bridge,
cannot continue
device id = 2440
device id = 2480
device id = 24c0
device id = 24d0
device id = 25a1
device id = 2670
physmap-flash.0: failed to claim resource 0
SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
Could not find PAR responsible for SC520CDP Flash Bank #0
Trying default address 0x8400000
Could not find PAR responsible for SC520CDP Flash Bank #1
Trying default address 0x8c00000
Could not find PAR responsible for SC520CDP DIL Flash
Trying default address 0x9400000
SC520 CDP flash device: 0x800000 at 0x8400000
Failed to ioremap_nocache
NetSc520 flash device: 0x100000 at 0x200000
Failed to ioremap_nocache
Failed to ioremap_nocache
scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
SNAPGEAR: failed to ioremap() BOOTCS
Generic platform RAM MTD, (c) 2004 Simtec Electronics
No recognised DiskOnChip devices found
slram: not enough parameters.
Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000
Nortel Networks.
pmc551: not detected
ftl_cs: FTL header not found.
No valid DiskOnChip devices found
NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba
NAND 8MiB 1,8V 8-bit)
flash size: 8 MiB
page size: 512 bytes
OOB area size: 16 bytes
sector size: 8 KiB
pages number: 16384
pages per sector: 16
bus width: 8
bits in sector size: 13
bits in page size: 9
bits in OOB size: 4
flash size with OOB: 8448 KiB
page address bytes: 3
sector address bytes: 2
options: 0x62
Scanning device for bad blocks
Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit":
0x000000000000-0x000000800000 : "NAND simulator partition
0"
ftl_cs: FTL header not found.
usbcore: registered new interface driver alauda
OneNAND Manufacturer: Samsung (0xec)
OneNAND 16MB 1.8V 16-bit (0x04)
OneNAND version = 0x001e
Lock scheme is Continuous Lock
Scanning device for bad blocks
Creating 1 MTD partitions on "OneNAND simulator":
0x000000000000-0x000001000000 : "OneNAND simulator
partition"
ftl_cs: FTL header not found.
Fixed MDIO Bus: probed
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Broadcom NetXtreme II CNIC Driver cnic v2.0.1 (Oct 01,
2009)
D-Link DE-620 pocket adapter io 0x378, which is busy.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of
California.
SLIP linefill/keepalive option.
DE600: port 0x378 busy
atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@...ld.com>
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.12
Fusion MPT FC Host driver 3.04.12
Fusion MPT SAS Host driver 3.04.12
Fusion MPT misc device (ioctl) driver 3.04.12
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.12
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.
USA
paride: bpck6 registered as protocol 15
pd: pd version 1.05, major 45, cluster 64, nice 0
Clocksource tsc unstable (delta = 479803194 ns)
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
Switching to clocksource pit
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not
supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-rc8-git5 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 2
ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-rc8-git5 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
usbcore: registered new interface driver hwa-hc
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: PARKBD AT adapter on parport0
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet
Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene
van Paassen
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
usbcore: registered new interface driver wacom
wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet
driver
input: PC Speaker as /devices/platform/pcspkr/input/input1
i2c /dev entries driver
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
Linux video capture interface: v2.00
usbcore: registered new interface driver dabusb
dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@...hat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 Dec 3 2009
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA
Technologies, Inc.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
dell-wmi: No known WMI GUID found
oprofile: using timer interrupt.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 33
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 4800+ processors (1 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
Using IPI No-Shortcut mode
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01104, max UDMA7
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth
0/32)
ata3.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD753LJ
1AA0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
sda:
sd 4:0:0:0: Attached scsi generic sg0 type 0
sda1 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
usb 1-5: new high speed USB device using ehci_hcd and
address 4
usb 1-5: New USB device found, idVendor=0bda,
idProduct=8187
usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
usb 1-5: Product: RTL8187_Wireless
usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 1-5: SerialNumber: 0015AF2347F2
usb 1-5: configuration #1 chosen from 1 choice
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max
UDMA/100
ata4.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N
CB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 2-2: new full speed USB device using ohci_hcd and
address 2
usb 2-2: device descriptor read/64, error -62
ata6: SATA link down (SStatus 0 SControl 300)
kAFS: Red Hat AFS client v0.1 registering.
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q)
OK
raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q)
OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q)
OK
raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q)
OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D)
OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D)
OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D)
OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D)
OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D)
OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D)
OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D)
OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D)
OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D)
OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D)
OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D)
OK
raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D)
OK
raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D)
OK
raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P)
OK
raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q)
OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D)
OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D)
OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D)
OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D)
OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D)
OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D)
OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D)
OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D)
OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D)
OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D)
OK
raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D)
OK
raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D)
OK
raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P)
OK
raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q)
OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D)
OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D)
OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D)
OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D)
OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D)
OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D)
OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D)
OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D)
OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D)
OK
raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D)
OK
raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D)
OK
raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P)
OK
raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q)
OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D)
OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D)
OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D)
OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D)
OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D)
OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D)
OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D)
OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D)
OK
raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D)
OK
raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D)
OK
raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P)
OK
raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q)
OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D)
OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D)
OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D)
OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D)
OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D)
OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D)
OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D)
OK
raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D)
OK
raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D)
OK
raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P)
OK
raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q)
OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D)
OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D)
OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D)
OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D)
OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D)
OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D)
OK
raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D)
OK
raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D)
OK
raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P)
OK
raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q)
OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D)
OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D)
OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D)
OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D)
OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D)
OK
raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D)
OK
raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D)
OK
raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P)
OK
raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q)
OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D)
OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D)
OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D)
OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D)
OK
raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D)
OK
raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D)
OK
raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P)
OK
raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q)
OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D)
OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D)
OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D)
OK
raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D)
OK
raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D)
OK
raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P)
OK
raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q)
OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D)
OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D)
OK
raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D)
OK
raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D)
OK
raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P)
OK
raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q)
OK
raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D)
OK
raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D)
OK
raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D)
OK
raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P)
OK
raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q)
OK
raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D)
OK
raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D)
OK
raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P)
OK
raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q)
OK
raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D)
OK
raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P)
OK
raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q)
OK
raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P)
OK
raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q)
OK
raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q)
OK
raid6test:
raid6test: complete (136 tests, 0 failures)
register_blkdev: cannot get major 3 for hd
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
md: Waiting for all devices to be available before
autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device
8:1.
usb 2-2: device descriptor read/64, error -62
devtmpfs: mounted
Freeing unused kernel memory: 852k freed
usb 2-2: new full speed USB device using ohci_hcd and
address 3
usb 2-2: device descriptor read/64, error -62
usb 2-2: device descriptor read/64, error -62
usb 2-2: new full speed USB device using ohci_hcd and
address 4
usb 2-2: device not accepting address 4, error -62
usb 2-2: new full speed USB device using ohci_hcd and
address 5
usb 2-2: device not accepting address 5, error -62
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 2-4: new low speed USB device using ohci_hcd and
address 6
usb 2-4: New USB device found, idVendor=05e3,
idProduct=1205
usb 2-4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
usb 2-4: Product: USB Mouse
usb 2-4: configuration #1 chosen from 1 choice
input: USB Mouse as
/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID
v1.10 Mouse [USB Mouse ] on
usb-0000:00:02.0-4/input0
forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.64.
forcedeth 0000:00:07.0: setting latency timer to 64
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1,
addr 00:1d:60:19:59:cc
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim
msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
k8temp 0000:00:18.3: Temperature readouts might be wrong -
check erratum #141
8139too Fast Ethernet driver 0.9.28
8139too 0000:01:08.0: Chip not responding, ignoring board
8139too: probe of 0000:01:08.0 failed with error -5
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700
mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000
mBm)
cfg80211: Calling CRDA for country: US
Driver 'rtc_cmos' needs updating - please use bus_type
methods
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
HDA Intel 0000:00:05.0: setting latency timer to 64
phy0: Selected rate control algorithm 'minstrel'
phy0: hwaddr 00:15:af:23:47:f2, RTL8187vB (default) V1 +
rtl8225z2
rtl8187: Customer ID is 0x00
Registered led device: rtl8187-phy0::tx
Registered led device: rtl8187-phy0::rx
rtl8187: wireless switch is on
usbcore: registered new interface driver rtl8187
hda_codec: AD1988: BIOS auto-probing.
input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:05.0/input/input4
EXT3 FS on sda1, internal journal
parport0: no more devices allowed
lp: driver loaded but no devices found
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
rt2860sta: module is from the staging directory, the
quality is unknown, you have been warned.
usbcore: registered new interface driver snd-usb-audio
---
Professional hosting for everyone - http://www.host.ru
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists