| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091203143836.518384c6@hyperion.delvare>
Date: Thu, 3 Dec 2009 14:38:36 +0100
From: Jean Delvare <khali@...ux-fr.org>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>, Pat Gefre <pfg@....com>
Subject: [PATCH 1/2] IOC3/IOC4: Various section fixes
Several IOC3 and IOC4 drivers misuse the __devinit and __devexit
section markers. Use __init and __exit instead as appropriate, then
add __devinit and __devexit where they really belong for PCI drivers.
Also make ioc4_serial_init static.
Signed-off-by: Jean Delvare <khali@...ux-fr.org>
Cc: Pat Gefre <pfg@....com>
---
Note: I was not able to build-test these patches, please do.
Andrew, I've been trying to send this fix and the next one to the
relevant maintainer for the past 6 months but it did not get anywhere.
Could you please pick them? Thanks.
drivers/misc/ioc4.c | 16 ++++++++--------
drivers/serial/ioc3_serial.c | 4 ++--
drivers/serial/ioc4_serial.c | 4 ++--
drivers/sn/ioc3.c | 15 ++++++++-------
4 files changed, 20 insertions(+), 19 deletions(-)
--- linux-2.6.30-rc8.orig/drivers/misc/ioc4.c 2009-06-04 11:41:00.000000000 +0200
+++ linux-2.6.30-rc8/drivers/misc/ioc4.c 2009-06-04 11:41:02.000000000 +0200
@@ -138,7 +138,7 @@ ioc4_unregister_submodule(struct ioc4_su
* even though the following code utilizes external interrupt registers
* to perform the speed calculation.
*/
-static void
+static void __devinit
ioc4_clock_calibrate(struct ioc4_driver_data *idd)
{
union ioc4_int_out int_out;
@@ -230,7 +230,7 @@ ioc4_clock_calibrate(struct ioc4_driver_
* on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
* If neither is present, it's a PCI-RT.
*/
-static unsigned int
+static unsigned int __devinit
ioc4_variant(struct ioc4_driver_data *idd)
{
struct pci_dev *pdev = NULL;
@@ -269,7 +269,7 @@ ioc4_variant(struct ioc4_driver_data *id
return IOC4_VARIANT_PCI_RT;
}
-static void
+static void __devinit
ioc4_load_modules(struct work_struct *work)
{
/* arg just has to be freed */
@@ -280,7 +280,7 @@ ioc4_load_modules(struct work_struct *wo
}
/* Adds a new instance of an IOC4 card */
-static int
+static int __devinit
ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct ioc4_driver_data *idd;
@@ -425,7 +425,7 @@ out:
}
/* Removes a particular instance of an IOC4 card. */
-static void
+static void __devexit
ioc4_remove(struct pci_dev *pdev)
{
struct ioc4_submodule *is;
@@ -476,7 +476,7 @@ static struct pci_driver ioc4_driver = {
.name = "IOC4",
.id_table = ioc4_id_table,
.probe = ioc4_probe,
- .remove = ioc4_remove,
+ .remove = __devexit_p(ioc4_remove),
};
MODULE_DEVICE_TABLE(pci, ioc4_id_table);
@@ -486,14 +486,14 @@ MODULE_DEVICE_TABLE(pci, ioc4_id_table);
*********************/
/* Module load */
-static int __devinit
+static int __init
ioc4_init(void)
{
return pci_register_driver(&ioc4_driver);
}
/* Module unload */
-static void __devexit
+static void __exit
ioc4_exit(void)
{
/* Ensure ioc4_load_modules() has completed before exiting */
--- linux-2.6.30-rc8.orig/drivers/serial/ioc3_serial.c 2009-06-04 11:41:00.000000000 +0200
+++ linux-2.6.30-rc8/drivers/serial/ioc3_serial.c 2009-06-04 11:41:02.000000000 +0200
@@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_op
/**
* ioc3_detect - module init called,
*/
-static int __devinit ioc3uart_init(void)
+static int __init ioc3uart_init(void)
{
int ret;
@@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void)
return ret;
}
-static void __devexit ioc3uart_exit(void)
+static void __exit ioc3uart_exit(void)
{
ioc3_unregister_submodule(&ioc3uart_ops);
uart_unregister_driver(&ioc3_uart);
--- linux-2.6.30-rc8.orig/drivers/serial/ioc4_serial.c 2009-06-04 11:41:00.000000000 +0200
+++ linux-2.6.30-rc8/drivers/serial/ioc4_serial.c 2009-06-04 11:41:02.000000000 +0200
@@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial
/**
* ioc4_serial_init - module init
*/
-int ioc4_serial_init(void)
+static int __init ioc4_serial_init(void)
{
int ret;
@@ -2926,7 +2926,7 @@ int ioc4_serial_init(void)
return ioc4_register_submodule(&ioc4_serial_submodule);
}
-static void __devexit ioc4_serial_exit(void)
+static void __exit ioc4_serial_exit(void)
{
ioc4_unregister_submodule(&ioc4_serial_submodule);
uart_unregister_driver(&ioc4_uart_rs232);
--- linux-2.6.30-rc8.orig/drivers/sn/ioc3.c 2009-06-04 11:41:00.000000000 +0200
+++ linux-2.6.30-rc8/drivers/sn/ioc3.c 2009-06-04 11:41:03.000000000 +0200
@@ -574,11 +574,11 @@ void ioc3_unregister_submodule(struct io
* Device management *
*********************/
-static char *
+static char * __devinitdata
ioc3_class_names[]={"unknown", "IP27 BaseIO", "IP30 system", "MENET 1/2/3",
"MENET 4", "CADduo", "Altix Serial"};
-static int ioc3_class(struct ioc3_driver_data *idd)
+static int __devinit ioc3_class(struct ioc3_driver_data *idd)
{
int res = IOC3_CLASS_NONE;
/* NIC-based logic */
@@ -601,7 +601,8 @@ static int ioc3_class(struct ioc3_driver
return res;
}
/* Adds a new instance of an IOC3 card */
-static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+static int __devinit
+ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct ioc3_driver_data *idd;
uint32_t pcmd;
@@ -753,7 +754,7 @@ out:
}
/* Removes a particular instance of an IOC3 card. */
-static void ioc3_remove(struct pci_dev *pdev)
+static void __devexit ioc3_remove(struct pci_dev *pdev)
{
int id;
struct ioc3_driver_data *idd;
@@ -805,7 +806,7 @@ static struct pci_driver ioc3_driver = {
.name = "IOC3",
.id_table = ioc3_id_table,
.probe = ioc3_probe,
- .remove = ioc3_remove,
+ .remove = __devexit_p(ioc3_remove),
};
MODULE_DEVICE_TABLE(pci, ioc3_id_table);
@@ -815,7 +816,7 @@ MODULE_DEVICE_TABLE(pci, ioc3_id_table);
*********************/
/* Module load */
-static int __devinit ioc3_init(void)
+static int __init ioc3_init(void)
{
if (ia64_platform_is("sn2"))
return pci_register_driver(&ioc3_driver);
@@ -823,7 +824,7 @@ static int __devinit ioc3_init(void)
}
/* Module unload */
-static void __devexit ioc3_exit(void)
+static void __exit ioc3_exit(void)
{
pci_unregister_driver(&ioc3_driver);
}
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists