| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091204073543.GC13603@linux-sh.org>
Date: Fri, 4 Dec 2009 16:35:44 +0900
From: Paul Mundt <lethal@...ux-sh.org>
To: linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: What's in sh-2.6.git for 2.6.33?
This is the current set of changes bound for 2.6.33. There's quite a lot
of random bits with nothing particularly exciting standing out.
There's been quite a bit of cache flushing rework for newer parts with
relatively more complex and configurable cache features/topologies, some
overhauling of the PMB code (with the bulk of that carrying over to
2.6.34), more SH-Mobile enhancements (SDHI, R-standby, etc.).
Beyond that, there's also a migration from oprofile to perf events, with
support for perf counters in all SH-4A parts for the first time, as well
as the legacy SH7750S/SH7091 migration.
And some more chainsawing and shuffling around of code so we can
start supporting ARM-based SH-Mobile CPUs with all of the existing
infrastructure, too.
The tree is at:
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
and contains:
Which contains:
Alexey Dobriyan (1):
sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
Giuseppe CAVALLARO (1):
sh: add sleazy FPU optimization
Guennadi Liakhovetski (2):
SH: add support for the RJ54N1CB0C camera for the kfr2r09 platform
serial: sh-sci: Fix too early port disabling.
Kuninori Morimoto (6):
sh: mach-ecevec24: Add SDHI support
sh: mach-ecovec24: Add USB1 gadget support
sh: sh7724: Add SPU2 support
sh: mach-ecovec24: modify address map
sh: mach-ecovec24: LCDC drive ability become high
sh: mach-ecovec24: Remove un-defined settings for VPU
Magnus Damm (38):
mfd: Add SuperH Mobile SDHI platform driver
mmc: Add SuperH to the tmio-mmc Kconfig
sh: SDHI platform data to the Migo-R board
sh: SDHI platform data to the AP325RXA board
sh: SDHI platform data to the SE7724 board
sh: SDHI platform data to the kfr2r09 board
sh: fix kexec by removing check for old kexec-tools
sh: add hwblk_id to sh_eth on ecovec24
sh: mac address through private data for sh_eth on ecovec24
sh: mac address through private data for sh_eth on ms7724se
sh: add SDHI1 support to ms7724se
sh: Add notifiers chains for cpu/board code
sh: Add sh7724 notifier for R-standby save/restore
sh: Allow boards to register memory pre/post sleep code
sh: Add kfr2r09 specific memory pre/post sleep code
sh: Add ms7724se specific memory pre/post sleep code
sh: Add migor specific memory pre/post sleep code
sh: Move ap325rxa board code into separate directory
sh: Add ap325rxa specific memory pre/post sleep code
sh: Add Ecovec24 specific memory pre/post sleep code
sh: Rework SuperH Mobile sleep mode code
sh: Keep track of allowed sleep modes
sh: Add MMU and Cache handling sleep mode code
sh: Use RSMEM for sleep code on sh7724
sh: Add R-standby sleep mode support
sh: Add KFR2R09 specific memory pre/post R-standby code
sh: Add SDHI1 support to the AP325RXA board
sh: Remove unused WP signal for SDHI0 and KFR2R09
sh: Add RWDT save/restore code for sh7724 R-standby
mfd: Add power control platform data to SDHI driver
sh: Add SDHI power control support to Ecovec
sh: Add CPG save/restore code for sh7724 R-standby
sh: Move KEYSC header file
sh: Break out SuperH PFC code
sh: Improve kfr2r09 serial port setup code
sh: fix sh7724 VEU3F resource size
sh: allow runtime pm without suspend/resume callbacks
sh: include empty zero page in romImage
Matt Fleming (16):
sh: Allocate PMB entry slot earlier
sh: Obliterate the P1 area macros
sh: Prepare for dynamic PMB support
sh: CONFIG_PMB doesn't mean the MMU is in 32bit mode
sh: Make most PMB functions static
sh: Get rid of the kmem cache code
sh: Remap physical memory into P1 and P2 in pmb_init()
sh: Fix the offset from P1SEG/P2SEG where we map RAM
sh: Fold fixed-PMB support into dynamic PMB support
sh: Teach the DWARF unwinder about modules
sh: Fix memory leak in dwarf_unwind_stack()
sh: Remove any reference to recursive functions from comments
sh: tracing: Use the DWARF unwinder for CALLER_ADDRx
sh: Annotate irq functions with "notrace"
sh: Do not apply virt_to_phys() to a physical address
sh: Drop associative writes for SH-4 cache flushes.
Paul Mundt (66):
sh: sh4_flush_cache_mm() optimizations.
sh: Kill off broken PHYSADDR() usage in sh4_flush_dcache_page().
sh: Kill off segment-based d-cache flushing on SH-4.
sh: Rework sh4_flush_cache_page() for coherent kmap mapping.
sh: Fix up redundant cache flushing for PAGE_SIZE > 4k.
sh: Factor in cpu id for selection of cache colour fixmap.
sh: Shut up CONFIG_32BIT=n compiler warnings.
sh: Reinstate ILSEL -> IRL intc mappings for SH-X3 proto CPU.
cdrom: gdrom: Kill off PHYSADDR use.
sh: maple: PHYSADDR() -> virt_to_phys() conversion.
sh: Generalize CALLER_ADDRx support.
sh: Tidy up the dwarf module helpers.
sh: Don't profile return_address().
sh: ftrace: Make code modification NMI safe.
sh: Provide CALLER_ADDRx definitions even when ftrace is disabled.
sh: Only invalidate the I-cache range for secondary CPUs stack_start.
sh: TS_RESTORE_SIGMASK conversion.
sh: Count NMIs in irq_cpustat_t.
sh: Force boot CPU in to light sleep mode for SH-X3 SMP.
sh: Idle loop chainsawing for SMP-based light sleep.
sh: Make check_pgt_cache() more aggressive while idling.
sh: Fix up IRQ re-enabling for the need_resched() case.
sh: Support SCHED_MC for SH-X3 multi-cores.
sh: Kill off legacy UBC wakeup cruft.
sh: Convert to asm-generic/irqflags.h.
sh: Disable SCIF2 on the SH-X3 proto CPU.
sh: Fix up smp_mb__xxx() memory barriers for SH-4A SMP.
sh: Fix up uninitialized variable warning in dwarf unwinder.
sh: Fix up cacheflush routine symbol exports.
sh: Convert to asm-generic/dma-mapping-common.h
sh: Add dma-mapping support for dma_alloc/free_coherent() overrides.
sh: Revamp PCI DMA coherence Kconfig bits.
sh: Kill off superfluous arch/sh/drivers/pci/Kconfig.
sh: Fix up dma_is_consistent().
sh64: cache flush symbol exports.
sh: intc: Make ack_regs generally available.
sh: Clean up more superfluous symbol exports.
sh: Bump up dma_ops initialization far earlier in the boot process.
sh: enable PERF_USE_VMALLOC across the board.
sh: perf events: Add preliminary support for SH-4A counters.
sh: perf events: Kill off left over debugging cruft.
sh: intc: dynamic IRQ support.
sh: intc: Handle legacy IRQ reservation in vector map.
sh: mach-se: Convert SE7722 FPGA to dynamic IRQ allocation.
video: sh_mobile_lcdcfb: Don't attempt to map zero-length scatterlists.
sh: perf events: Fix up uninitialized variable warning.
sh: Default-enable SPU clock for SH7724.
sh: perf events: Preliminary callchain support.
sh: perf events: Add support for SH7750-style counters.
sh: oprofile: Kill off bitrotted SH7750 driver.
sh: oprofile: Fix up count size mismatch for common impl.
sh: perf events: Document SH-4A raw event codes.
sh: Enable PMB support for all SH-4A CPUs.
sh: Fix up the CONFIG_PERF_EVENTS=n build for SH-4.
sh: Use the generic I/O port base for slowdown.
sh64: Fix up the CONFIG_GENERIC_BUG=n build.
sh64: Fix up reworked cache op build.
sh: dma: Kill off bogus dma_sysclass symbol export.
sh: Apply the sleazy FPU changes for SH-2A FPU as well.
sh: Fix up the FPU emulation build.
serial: sh-sci: Depend on HAVE_CLK unconditionally.
sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
sh: pfc: pr_info() -> pr_debug() cleanups.
sh: Add default uImage rule for se7724, ap325rxa, and migor.
sh: Partial revert of copy/clear_user_highpage() optimizations.
sh: Make associative cache writes fatal on all SH-4A parts.
Roel Kluin (1):
sh: Make sure indexes are positive
Stuart Menefy (3):
sh: Optimised memset for SH4
sh: Improve performance of SH4 versions of copy/clear_user_highpage
sh: Minor optimisations to FPU handling
Uwe Kleine-König (2):
rtc: don't use __exit_p to wrap ds1302_rtc_remove
serial: sh-sci: don't use __devexit_p to wrap sci_remove
Valentin R Sitsikov (1):
sh: fix watchdog timer for sh7780/sh7785
arch/sh/Kconfig | 29 +-
arch/sh/Makefile | 4 +
arch/sh/boards/Makefile | 1 -
arch/sh/boards/mach-ap325rxa/Makefile | 2 +
arch/sh/boards/mach-ap325rxa/sdram.S | 69 +++
.../{board-ap325rxa.c => mach-ap325rxa/setup.c} | 97 +++-
arch/sh/boards/mach-ecovec24/Makefile | 2 +-
arch/sh/boards/mach-ecovec24/sdram.S | 52 ++
arch/sh/boards/mach-ecovec24/setup.c | 197 ++++++---
arch/sh/boards/mach-highlander/setup.c | 2 +-
arch/sh/boards/mach-kfr2r09/Makefile | 2 +-
arch/sh/boards/mach-kfr2r09/sdram.S | 80 ++++
arch/sh/boards/mach-kfr2r09/setup.c | 238 +++++++++-
arch/sh/boards/mach-migor/Makefile | 2 +-
arch/sh/boards/mach-migor/sdram.S | 69 +++
arch/sh/boards/mach-migor/setup.c | 65 ++-
arch/sh/boards/mach-r2d/irq.c | 2 +-
arch/sh/boards/mach-se/7722/irq.c | 32 +-
arch/sh/boards/mach-se/7722/setup.c | 17 +-
arch/sh/boards/mach-se/7724/Makefile | 2 +-
arch/sh/boards/mach-se/7724/sdram.S | 52 ++
arch/sh/boards/mach-se/7724/setup.c | 96 ++++-
arch/sh/boot/compressed/misc.c | 2 +-
arch/sh/boot/romimage/Makefile | 12 +-
arch/sh/boot/romimage/head.S | 38 ++
arch/sh/drivers/dma/dma-sysfs.c | 2 -
arch/sh/drivers/pci/Kconfig | 19 -
arch/sh/include/asm/addrspace.h | 9 +-
arch/sh/include/asm/atomic.h | 9 +-
arch/sh/include/asm/bitops.h | 4 +-
arch/sh/include/asm/bugs.h | 4 +
arch/sh/include/asm/dma-mapping.h | 233 +++-------
arch/sh/include/asm/dwarf.h | 28 ++
arch/sh/include/asm/fixmap.h | 12 +-
arch/sh/include/asm/fpu.h | 26 +-
arch/sh/include/asm/ftrace.h | 17 +
arch/sh/include/asm/gpio.h | 82 +----
arch/sh/include/asm/hardirq.h | 13 +-
arch/sh/include/asm/io.h | 16 +-
arch/sh/include/asm/irqflags.h | 31 +--
arch/sh/include/asm/irqflags_32.h | 99 ----
arch/sh/include/asm/irqflags_64.h | 85 ----
arch/sh/include/asm/mmu.h | 13 +-
arch/sh/include/asm/pci.h | 30 +-
arch/sh/include/asm/perf_event.h | 31 ++-
arch/sh/include/asm/pgtable.h | 26 +-
arch/sh/include/asm/pgtable_32.h | 2 +-
arch/sh/include/asm/processor_32.h | 3 +-
arch/sh/include/asm/scatterlist.h | 2 +-
arch/sh/include/asm/suspend.h | 65 +++
arch/sh/include/asm/system.h | 4 -
arch/sh/include/asm/system_32.h | 29 ++
arch/sh/include/asm/system_64.h | 26 +
arch/sh/include/asm/thread_info.h | 30 +-
arch/sh/include/asm/topology.h | 8 +
arch/sh/include/asm/ubc.h | 11 -
arch/sh/include/asm/watchdog.h | 59 +++-
arch/sh/include/cpu-sh4/cpu/watchdog.h | 13 +
.../mach-ecovec24/mach/partner-jet-setup.txt | 3 +-
arch/sh/include/mach-se/mach/se7722.h | 11 +-
arch/sh/kernel/Makefile | 10 +-
arch/sh/kernel/asm-offsets.c | 23 +
arch/sh/kernel/cpu/Makefile | 1 -
arch/sh/kernel/cpu/init.c | 28 +-
arch/sh/kernel/cpu/sh2a/fpu.c | 27 +-
arch/sh/kernel/cpu/sh3/entry.S | 33 --
arch/sh/kernel/cpu/sh4/Makefile | 8 +-
arch/sh/kernel/cpu/sh4/fpu.c | 28 +-
arch/sh/kernel/cpu/sh4/perf_event.c | 253 ++++++++++
arch/sh/kernel/cpu/sh4a/Makefile | 1 +
arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +-
arch/sh/kernel/cpu/sh4a/perf_event.c | 269 +++++++++++
arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 264 ++++++++++-
arch/sh/kernel/cpu/sh4a/setup-shx3.c | 45 +-
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 37 +-
arch/sh/kernel/cpu/sh5/entry.S | 2 +-
arch/sh/kernel/cpu/shmobile/cpuidle.c | 42 +-
arch/sh/kernel/cpu/shmobile/pm.c | 117 ++++-
arch/sh/kernel/cpu/shmobile/pm_runtime.c | 17 +-
arch/sh/kernel/cpu/shmobile/sleep.S | 344 ++++++++------
arch/sh/kernel/cpu/ubc.S | 59 ---
arch/sh/kernel/dma-nommu.c | 82 ++++
arch/sh/kernel/dwarf.c | 222 +++++++--
arch/sh/kernel/entry-common.S | 2 +-
arch/sh/kernel/ftrace.c | 146 ++++++-
arch/sh/kernel/head_32.S | 2 +-
arch/sh/kernel/idle.c | 78 +++-
arch/sh/kernel/io_generic.c | 4 +-
arch/sh/kernel/irq.c | 14 +
arch/sh/kernel/irq_32.c | 57 +++
arch/sh/kernel/irq_64.c | 51 ++
arch/sh/kernel/machine_kexec.c | 6 -
arch/sh/kernel/machvec.c | 4 +
arch/sh/kernel/module.c | 9 +-
arch/sh/kernel/perf_callchain.c | 98 ++++
arch/sh/kernel/perf_event.c | 312 ++++++++++++
arch/sh/kernel/process_32.c | 42 ++-
arch/sh/kernel/process_64.c | 2 +
arch/sh/kernel/return_address.c | 54 +++
arch/sh/kernel/setup.c | 4 +
arch/sh/kernel/sh_ksyms_32.c | 67 +---
arch/sh/kernel/sh_ksyms_64.c | 10 -
arch/sh/kernel/signal_32.c | 24 +-
arch/sh/kernel/signal_64.c | 13 +-
arch/sh/kernel/smp.c | 4 +-
arch/sh/kernel/topology.c | 26 +
arch/sh/kernel/traps.c | 8 +-
arch/sh/kernel/traps_32.c | 82 ++--
arch/sh/lib/Makefile | 7 +-
arch/sh/lib/memset-sh4.S | 107 +++++
arch/sh/math-emu/math.c | 6 +-
arch/sh/mm/Kconfig | 19 +-
arch/sh/mm/Makefile | 3 +-
arch/sh/mm/cache-sh4.c | 501 +++-----------------
arch/sh/mm/cache-sh5.c | 2 +-
arch/sh/mm/cache-sh7705.c | 2 +-
arch/sh/mm/cache.c | 18 +-
arch/sh/mm/consistent.c | 28 +-
arch/sh/mm/init.c | 19 +
arch/sh/mm/kmap.c | 4 +-
arch/sh/mm/numa.c | 2 +-
arch/sh/mm/pmb-fixed.c | 45 --
arch/sh/mm/pmb.c | 268 ++++++------
arch/sh/oprofile/Makefile | 4 -
arch/sh/oprofile/common.c | 38 +--
arch/sh/oprofile/op_impl.h | 2 +-
arch/sh/oprofile/op_model_sh7750.c | 255 ----------
drivers/cdrom/gdrom.c | 10 +-
drivers/input/keyboard/sh_keysc.c | 2 +-
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sh_mobile_sdhi.c | 156 ++++++
drivers/mmc/host/Kconfig | 2 +-
drivers/rtc/rtc-ds1302.c | 2 +-
drivers/serial/Kconfig | 2 +-
drivers/serial/sh-sci.c | 59 +---
drivers/serial/sh-sci.h | 2 +-
drivers/sh/Makefile | 1 +
drivers/sh/intc.c | 123 +++++-
drivers/sh/maple/maple.c | 4 +-
arch/sh/kernel/gpio.c => drivers/sh/pfc.c | 43 +-
drivers/video/sh_mobile_lcdcfb.c | 32 +-
.../include/asm => include/linux/input}/sh_keysc.h | 6 +-
include/linux/mfd/sh_mobile_sdhi.h | 8 +
include/linux/sh_intc.h | 7 +-
include/linux/sh_pfc.h | 96 ++++
146 files changed, 4741 insertions(+), 2405 deletions(-)
create mode 100644 arch/sh/boards/mach-ap325rxa/Makefile
create mode 100644 arch/sh/boards/mach-ap325rxa/sdram.S
rename arch/sh/boards/{board-ap325rxa.c => mach-ap325rxa/setup.c} (87%)
create mode 100644 arch/sh/boards/mach-ecovec24/sdram.S
create mode 100644 arch/sh/boards/mach-kfr2r09/sdram.S
create mode 100644 arch/sh/boards/mach-migor/sdram.S
create mode 100644 arch/sh/boards/mach-se/7724/sdram.S
delete mode 100644 arch/sh/drivers/pci/Kconfig
delete mode 100644 arch/sh/include/asm/irqflags_32.h
delete mode 100644 arch/sh/include/asm/irqflags_64.h
create mode 100644 arch/sh/kernel/cpu/sh4/perf_event.c
create mode 100644 arch/sh/kernel/cpu/sh4a/perf_event.c
delete mode 100644 arch/sh/kernel/cpu/ubc.S
create mode 100644 arch/sh/kernel/dma-nommu.c
create mode 100644 arch/sh/kernel/irq_32.c
create mode 100644 arch/sh/kernel/irq_64.c
create mode 100644 arch/sh/kernel/perf_callchain.c
create mode 100644 arch/sh/kernel/perf_event.c
create mode 100644 arch/sh/kernel/return_address.c
create mode 100644 arch/sh/lib/memset-sh4.S
delete mode 100644 arch/sh/mm/pmb-fixed.c
delete mode 100644 arch/sh/oprofile/op_model_sh7750.c
create mode 100644 drivers/mfd/sh_mobile_sdhi.c
rename arch/sh/kernel/gpio.c => drivers/sh/pfc.c (94%)
rename {arch/sh/include/asm => include/linux/input}/sh_keysc.h (75%)
create mode 100644 include/linux/mfd/sh_mobile_sdhi.h
create mode 100644 include/linux/sh_pfc.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists