Linux version 2.6.32 (root@drama) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Sat Dec 5 12:11:51 ICT 2009 Command line: root=/dev/sda6 rootfstype=ext4 ro fastboot KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable) BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data) BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS) BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x7f7a0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F800000 mask FFF800000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007f7a0000 (usable) modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data) modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS) modified: 000000007f7f0000 - 000000007f800000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007f7a0000 0000000000 - 007f600000 page 2M 007f600000 - 007f7a0000 page 4k kernel direct mapping tables up to 7f7a0000 @ 10000-14000 ACPI: RSDP 00000000000f7fd0 00024 (v02 ACPIAM) ACPI: XSDT 000000007f7a0100 0007C (v01 _ASUS_ Notebook 06000708 MSFT 00000097) ACPI: FACP 000000007f7a0290 000F4 (v03 A_M_I_ OEMFACP 06000708 MSFT 00000097) ACPI: DSDT 000000007f7a0640 0CBF4 (v01 A8S00 A8S00001 00000001 INTL 20051117) ACPI: FACS 000000007f7ae000 00040 ACPI: APIC 000000007f7a0390 0005C (v01 A_M_I_ OEMAPIC 06000708 MSFT 00000097) ACPI: MCFG 000000007f7a03f0 0003C (v01 A_M_I_ OEMMCFG 06000708 MSFT 00000097) ACPI: SLIC 000000007f7a0430 00176 (v01 _ASUS_ Notebook 06000708 MSFT 00000097) ACPI: BOOT 000000007f7a05b0 00028 (v01 A_M_I_ OEMBOOT 06000708 MSFT 00000097) ACPI: ECDT 000000007f7a05e0 00054 (v01 A_M_I_ OEMECDT 06000708 MSFT 00000097) ACPI: OEMB 000000007f7ae040 00060 (v01 A_M_I_ AMI_OEM 06000708 MSFT 00000097) ACPI: HPET 000000007f7ad240 00038 (v01 A_M_I_ OEMHPET 06000708 MSFT 00000097) ACPI: GSCI 000000007f7ae0a0 02024 (v01 A_M_I_ GMCHSCI 06000708 MSFT 00000097) ACPI: ATKG 000000007f7b02d0 08024 (v01 A_M_I_ OEMATKG 05000702 MSFT 00000097) ACPI: SSDT 000000007f7b8cf0 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 007f7a0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001794138] TEXT DATA BSS ==> [0001000000 - 0001794138] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0001795000 - 0001795240] BRK ==> [0001795000 - 0001795240] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f7a0 On node 0 totalpages: 522031 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3826 pages, LIFO batch:0 DMA32 zone: 7083 pages used for memmap DMA32 zone: 510965 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001800000 s81496 r8192 d20904 u1048576 pcpu-alloc: s81496 r8192 d20904 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514791 Kernel command line: root=/dev/sda6 rootfstype=ext4 ro fastboot PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 2047524k/2088576k available (4234k kernel code, 452k absent, 39872k reserved, 2172k data, 424k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1994.974 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.94 BogoMIPS (lpj=1994974) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.81 BogoMIPS (lpj=1994907) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7979.76 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI Warning: Incorrect checksum in table [ATKG] - 81, should be 59 (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeaff400-0xfeaff7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaff000-0xfeaff3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 06f8 (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe09f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeaff800-0xfeafffff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:02:00.0: reg 10 32bit mmio: [0xfdcff000-0xfdcfffff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff] pci 0000:03:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfddc0000-0xfdddffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfde00000-0xfe5fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xbdf00000-0xbfefffff] pci 0000:07:03.0: reg 10 32bit mmio: [0xfe6ff800-0xfe6fffff] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold pci 0000:07:03.0: PME# disabled pci 0000:07:03.1: reg 10 32bit mmio: [0xfe6ff400-0xfe6ff4ff] pci 0000:07:03.1: supports D1 D2 pci 0000:07:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.1: PME# disabled pci 0000:07:03.2: reg 10 32bit mmio: [0xfe6ff000-0xfe6ff0ff] pci 0000:07:03.2: supports D1 D2 pci 0000:07:03.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.2: PME# disabled pci 0000:07:03.3: reg 10 32bit mmio: [0xfe6fec00-0xfe6fecff] pci 0000:07:03.3: supports D1 D2 pci 0000:07:03.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:03.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 12) ACPI: PCI Interrupt Link [LNKE] (IRQs *6) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:08: ioport range 0x480-0x48f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x400-0x41f has been reserved system 00:09: ioport range 0x500-0x53f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved system 00:0b: ioport range 0x250-0x253 has been reserved system 00:0b: ioport range 0x256-0x25f has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x7f7fffff could not be reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0xb000-0xbfff pci 0000:00:1c.2: MEM window: 0xfdd00000-0xfddfffff pci 0000:00:1c.2: PREFETCH window: 0x00000080600000-0x000000807fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.3: IO window: 0x3000-0x3fff pci 0000:00:1c.3: MEM window: 0x80800000-0x809fffff pci 0000:00:1c.3: PREFETCH window: 0x00000080a00000-0x00000080bfffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xfde00000-0xfe5fffff pci 0000:00:1c.4: PREFETCH window: 0x000000bdf00000-0x000000bfefffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: enabling device (0104 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0106 -> 0107) pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0104 -> 0107) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:02: resource 2 pref mem [0x80400000-0x805fffff] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 2 pref mem [0x80600000-0x807fffff] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] pci_bus 0000:04: resource 1 mem: [0x80800000-0x809fffff] pci_bus 0000:04: resource 2 pref mem [0x80a00000-0x80bfffff] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] pci_bus 0000:05: resource 1 mem: [0xfde00000-0xfe5fffff] pci_bus 0000:05: resource 2 pref mem [0xbdf00000-0xbfefffff] pci_bus 0000:07: resource 1 mem: [0xfe600000-0xfe6fffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Simple Boot Flag at 0x52 set to 0x1 Scanning for low memory corruption every 60 seconds VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.13) msgmni has been set to 4000 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 ACPI: AC Adapter [AC0] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: SSDT 000000007f7b83d0 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 000000007f7b86f0 005F1 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 Switching to clocksource hpet ACPI: SSDT 000000007f7b8300 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: SSDT 000000007f7b8660 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) processor LNXCPU:01: registered as cooling_device1 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 29 for MSI/MSI-X [drm] set up 7M of stolen space ACPI: Battery Slot [BAT0] (battery present) [drm] TV-14: set mode NTSC 480i 0 [drm] LVDS-8: set mode 1280x800 1d Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:1f: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3 ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff900 irq 30 ata2: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff980 irq 30 ata3: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaffa00 irq 30 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata5: port disabled. ignoring. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 31 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc90010086000, 00:1d:60:62:06:c1, XID 18000000 IRQ 31 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 cpuidle: using governor ladder cpuidle: using governor menu asus_laptop: Asus Laptop Support version 0.42 asus_laptop: A8E model detected input: Asus Laptop extra buttons as /devices/virtual/input/input4 Registered led device: asus::mail asus_laptop: Brightness ignored, must be controlled by ACPI video driver Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 hda_codec: ALC660-VD: BIOS auto-probing. ALSA device list: #0: HDA Intel at 0xfeaf8000 irq 22 TCP cubic registered NET: Registered protocol family 17 ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS06, max UDMA/33 ata4.00: configured for UDMA/33 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-8: WDC WD3200BEKT-22F3T0, 11.01A11, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D AS06 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda6): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:6. Freeing unused kernel memory: 424k freed udev: starting version 147 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeaff400 ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012) ACPI: Expecting a [Reference] package element, found type C ACPI: Invalid passive threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (58 C) ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22) sdhci-pci 0000:07:03.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA ohci1394 0000:07:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fe6ff800-fe6fffff] Max Packet=[2048] IR/IT contexts=[4/4] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:02:00.0: setting latency timer to 64 usb 1-1: new high speed USB device using ehci_hcd and address 2 iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:02:00.0: irq 32 for MSI/MSI-X usb 1-1: configuration #1 chosen from 1 choice phy0: Selected rate control algorithm 'iwl-3945-rs' Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b028) Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000 input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input6 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 usb 6-1: new full speed USB device using uhci_hcd and address 2 EXT4-fs (sda5): barriers disabled EXT4-fs (sda5): mounted filesystem with ordered data mode usb 6-1: configuration #1 chosen from 1 choice EXT4-fs (sda7): barriers disabled EXT4-fs (sda7): mounted filesystem with ordered data mode Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Adding 1823368k swap on /dev/sda4. Priority:-1 extents:1 across:1823368k ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a56332] ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX wlan0: deauthenticating from 00:13:f7:0e:e9:8c by local choice (reason=3) wlan0: direct probe to AP 00:13:f7:0e:e9:8c (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:13:f7:0e:e9:8c (try 1) wlan0: authenticated wlan0: associate with AP 00:13:f7:0e:e9:8c (try 1) wlan0: RX AssocResp from 00:13:f7:0e:e9:8c (capab=0x471 status=0 aid=1) wlan0: associated