| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 Dec 2009 20:13:46 +0100 From: Volker Lanz <vl@...ra.de> To: Yinghai Lu <yinghai@...nel.org> Cc: linux-kernel@...r.kernel.org, mingo@...e.hu Subject: Re: [BISECTED, REGRESSION] Successful resume from suspend but freezes after I/O On Monday 07 December 2009 19:24:02 Yinghai Lu wrote: > Volker Lanz wrote: > > Hi, > > > > updating to my distro's new 2.6.31 kernel on an x86_64 quad core machine > > with 6 GB of RAM I noticed resuming from suspend still worked as before, > > but the machine will now reproducably freeze (have to hard reset) > > afterwards as soon as I do something disk I/O heavy, though the problem > > is probably not related to disk activity at all. > > > > A current mainline 2.6.32 checkout shows the same behaviour. > > > > I git-bisected the problem to this commit: > > > > > > ------------------------------------------------------------------------- > >---- commit 78a8b35bc7abf8b8333d6f625e08c0f7cc1c3742 > > Author: Yinghai Lu <yinghai@...nel.org> > > Date: Thu Mar 12 22:36:01 2009 -0700 > > > > x86: make e820_update_range() handle small range update > > > > Impact: enhance e820 code to handle more cases > > > > Try to handle new range which could be covered by one entry. > > > > Signed-off-by: Yinghai Lu <yinghai@...nel.org> > > Cc: jbeulich@...ell.com > > LKML-Reference: <49B9F0C1.10402@...nel.org> > > Signed-off-by: Ingo Molnar <mingo@...e.hu> > > ------------------------------------------------------------------------- > >---- > > > > > > A kernel built from this revision does not boot, so the first booting > > kernel to show the problem actually seems to be: > > > > > > ------------------------------------------------------------------------- > >---- commit 6d7942dc2a70a7e74c352107b150265602671588 > > Author: Yinghai Lu <yinghai@...nel.org> > > Date: Sat Mar 14 14:32:41 2009 -0700 > > > > x86: fix 64k corruption-check > > > > Impact: fix boot crash > > > > Need to exit early if the addr is far above 64k. > > > > The crash got exposed by: > > > > 78a8b35: x86: make e820_update_range() handle small range update > > > > Signed-off-by: Yinghai Lu <yinghai@...nel.org> > > Cc: <stable@...nel.org> > > LKML-Reference: <49BC2279.2030101@...nel.org> > > Signed-off-by: Ingo Molnar <mingo@...e.hu> > > ------------------------------------------------------------------------- > >---- > > > > > > The last kernel to work without problems thus seems to be this one: > > > > > > ------------------------------------------------------------------------- > >---- commit 773e673de27297d07d852e7e9bfd1a695cae1da2 > > Author: Yinghai Lu <yinghai@...nel.org> > > Date: Thu Mar 12 21:35:18 2009 -0700 > > > > x86: fix e820_update_range() > > > > Impact: fix left range size on head > > > > | commit 5c0e6f035df983210e4d22213aed624ced502d3d > > | x86: fix code paths used by update_mptable > > | Impact: fix crashes under Xen due to unrobust e820 code > > > > fixes one e820 bug, but introduces another bug. > > > > Need to update size for left range at first in case it is header. > > > > also add __e820_add_region take more parameter. > > > > Signed-off-by: Yinghai Lu <yinghai@...nel.org> > > Cc: jbeulich@...ell.com > > LKML-Reference: <49B9E286.502@...nel.org> > > Signed-off-by: Ingo Molnar <mingo@...e.hu> > > ------------------------------------------------------------------------- > >---- > > > > > > The problem is 100% reproducable on this machine: Resuming and then > > copying /usr/ to $HOME will freeze after a few hundred MB have been > > copied. Earlier kernels worked fine for the last couple of months. > > > > What additional information is required to help diagnose and hopefully > > fix the problem? > > whole boot log with CONFIG_PCI_DEBUG and debug on command line. Here it is. It's huge, I hope you were expecting that... ----------------------------------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-rc7-01054-g6d7942d (vl@...vor) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #21 SMP Mon Dec 7 19:56:44 CET 2009 [ 0.000000] Command line: root=UUID=160351ee-c9b0-4a72-9fd5-9962c8137a7e ro nosplash debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x100000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x100000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS) [ 0.000000] modified: 00000000cfee2000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001b0000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000 [ 0.000000] 0100000000 - 01b0000000 page 2M [ 0.000000] kernel direct mapping tables up to 1b0000000 @ c000-14000 [ 0.000000] RAMDISK: 3499d000 - 37feffc4 [ 0.000000] ACPI: RSDP 000F7280, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFEE2040, 004C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP CFEE20C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT CFEE2180, 4CD9 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS CFEE0000, 0040 [ 0.000000] ACPI: EUDS CFEE7580, 0500 (r1 GBT 0 0) [ 0.000000] ACPI: HPET CFEE74C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG CFEE7540, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC CFEE6EC0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT CFEE83B0, 018A (r1 PmRef Cpu0Cst 3001 INTL 20040311) [ 0.000000] ACPI: SSDT CFEE8540, 018A (r1 PmRef Cpu1Cst 3001 INTL 20040311) [ 0.000000] ACPI: SSDT CFEE86D0, 018A (r1 PmRef Cpu2Cst 3001 INTL 20040311) [ 0.000000] ACPI: SSDT CFEE8860, 018A (r1 PmRef Cpu3Cst 3001 INTL 20040311) [ 0.000000] ACPI: SSDT CFEE89F0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001b0000000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001b0000000 [ 0.000000] NODE_DATA [000000000000f000 - 0000000000013fff] [ 0.000000] bootmap [0000000000014000 - 0000000000049fff] pages 36 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 01b0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b002f8] TEXT DATA BSS ==> [0000200000 - 0000b002f8] [ 0.000000] #3 [003499d000 - 0037feffc4] RAMDISK ==> [003499d000 - 0037feffc4] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000f000] PGTABLE ==> [000000c000 - 000000f000] [ 0.000000] found SMP MP-table at [ffff8800000f5890] f5890 [ 0.000000] [ffffe20000000000-ffffe20005ffffff] PMD -> [ffff880028200000- ffff88002d7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x001b0000 [ 0.000000] On node 0 totalpages: 1572474 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2410 pages reserved [ 0.000000] DMA zone: 1528 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 9856 pages used for memmap [ 0.000000] Normal zone: 711040 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee2000 [ 0.000000] PM: Registered nosave memory: 00000000cfee2000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages at ffff880028034000, static data 80608 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1545872 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=160351ee- c9b0-4a72-9fd5-9962c8137a7e ro nosplash debug [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2833.325 MHz processor. [ 0.010000] Console: colour VGA+ 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] allocated 62914560 bytes of page_cgroup [ 0.010000] please try cgroup_disable=memory option if you don't want [ 0.010000] Checking aperture... [ 0.010000] No AGP bridge found [ 0.010000] Calgary: detecting Calgary via BIOS EBDA area [ 0.010000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.010000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.010000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.010000] Memory: 6008820k/7077888k available (4755k kernel code, 787992k absent, 281076k reserved, 2561k data, 624k init) [ 0.010000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.65 BogoMIPS (lpj=28333250) [ 0.010000] Security Framework initialized [ 0.010000] SELinux: Disabled at boot. [ 0.010000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] [ds] using Core 2/Atom configuration [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] CPU0: Thermal monitoring enabled (TM2) [ 0.010000] using mwait in idle threads. [ 0.010000] ACPI: Core revision 20081204 [ 0.017969] Setting APIC routing to flat [ 0.018308] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118373] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.120000] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5666.01 BogoMIPS (lpj=28330075) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] [ds] using Core 2/Atom configuration [ 0.010000] CPU 1/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.271497] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.271985] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280060] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 5666.02 BogoMIPS (lpj=28330122) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] [ds] using Core 2/Atom configuration [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] CPU2: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.441427] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.441919] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.450107] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 5665.98 BogoMIPS (lpj=28329923) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] [ds] using Core 2/Atom configuration [ 0.010000] CPU 3/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU3: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.611419] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a [ 0.611922] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.620015] Brought up 4 CPUs [ 0.620054] Total of 4 processors activated (22664.67 BogoMIPS). [ 0.620139] CPU0 attaching sched-domain: [ 0.620178] domain 0: span 0,3 level MC [ 0.620242] groups: 0 3 [ 0.620359] domain 1: span 0-3 level CPU [ 0.620424] groups: 0,3 1-2 [ 0.620542] CPU1 attaching sched-domain: [ 0.620580] domain 0: span 1-2 level MC [ 0.620644] groups: 1 2 [ 0.620761] domain 1: span 0-3 level CPU [ 0.620826] groups: 1-2 0,3 [ 0.620944] CPU2 attaching sched-domain: [ 0.620981] domain 0: span 1-2 level MC [ 0.621046] groups: 2 1 [ 0.621162] domain 1: span 0-3 level CPU [ 0.621226] groups: 1-2 0,3 [ 0.621344] CPU3 attaching sched-domain: [ 0.621382] domain 0: span 0,3 level MC [ 0.621446] groups: 3 0 [ 0.621563] domain 1: span 0-3 level CPU [ 0.621627] groups: 0,3 1-2 [ 0.621845] net_namespace: 1840 bytes [ 0.621845] Booting paravirtualized kernel on bare hardware [ 0.621845] regulator: core version 0.5 [ 0.621845] Time: 20:04:17 Date: 12/07/09 [ 0.621845] NET: Registered protocol family 16 [ 0.621845] ACPI: bus type pci registered [ 0.621845] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.621845] PCI: MCFG area at e0000000 reserved in E820 [ 0.622150] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.622189] PCI: Using configuration type 1 for base access [ 0.622693] bio: create slab <bio-0> at 0 [ 0.622742] ACPI: EC: Look up EC in DSDT [ 0.633005] ACPI: Interpreter enabled [ 0.633048] ACPI: (supports S0 S3 S4 S5) [ 0.633209] ACPI: Using IOAPIC for interrupt routing [ 0.636668] ACPI: No dock devices found. [ 0.636716] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.636773] PCI: Scanning bus 0000:00 [ 0.636818] pci 0000:00:00.0: found [8086:2e20] class 000600 header type 00 [ 0.636875] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.636931] pci 0000:00:01.0: found [8086:2e21] class 000604 header type 01 [ 0.636978] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.637028] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.637069] pci 0000:00:01.0: PME# disabled [ 0.637140] pci 0000:00:1a.0: found [8086:3a37] class 000c03 header type 00 [ 0.637199] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f] [ 0.637247] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.637314] pci 0000:00:1a.1: found [8086:3a38] class 000c03 header type 00 [ 0.637373] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f] [ 0.637421] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.637488] pci 0000:00:1a.2: found [8086:3a39] class 000c03 header type 00 [ 0.637547] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f] [ 0.637595] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.637668] pci 0000:00:1a.7: found [8086:3a3c] class 000c03 header type 00 [ 0.637715] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe9305000-0xe93053ff] [ 0.637780] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.637850] pci 0000:00:1b.0: found [8086:3a3e] class 000403 header type 00 [ 0.637899] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe9300000-0xe9303fff] [ 0.637956] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.638011] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.638052] pci 0000:00:1b.0: PME# disabled [ 0.638105] pci 0000:00:1c.0: found [8086:3a40] class 000604 header type 01 [ 0.638156] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.638213] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.638255] pci 0000:00:1c.0: PME# disabled [ 0.638310] pci 0000:00:1c.3: found [8086:3a46] class 000604 header type 01 [ 0.638361] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.638418] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638460] pci 0000:00:1c.3: PME# disabled [ 0.638513] pci 0000:00:1c.4: found [8086:3a48] class 000604 header type 01 [ 0.638565] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.638622] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.638663] pci 0000:00:1c.4: PME# disabled [ 0.638724] pci 0000:00:1d.0: found [8086:3a34] class 000c03 header type 00 [ 0.638782] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.638831] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.638898] pci 0000:00:1d.1: found [8086:3a35] class 000c03 header type 00 [ 0.638956] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.639005] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.639071] pci 0000:00:1d.2: found [8086:3a36] class 000c03 header type 00 [ 0.639130] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.639178] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.639249] pci 0000:00:1d.7: found [8086:3a3a] class 000c03 header type 00 [ 0.639296] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe9304000-0xe93043ff] [ 0.639361] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.639428] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01 [ 0.639479] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.639548] pci 0000:00:1f.0: found [8086:3a18] class 000601 header type 00 [ 0.639624] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.639698] pci 0000:00:1f.2: found [8086:3a20] class 000101 header type 00 [ 0.639743] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.639785] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.639827] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.639869] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.639911] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.639953] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f] [ 0.640009] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.640071] pci 0000:00:1f.3: found [8086:3a30] class 000c05 header type 00 [ 0.640119] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe9306000-0xe93060ff] [ 0.640169] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.640216] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.640276] pci 0000:00:1f.5: found [8086:3a26] class 000101 header type 00 [ 0.640321] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707] [ 0.640363] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803] [ 0.640406] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907] [ 0.640448] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03] [ 0.640490] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f] [ 0.640532] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.640578] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.640635] PCI: Fixups for bus 0000:00 [ 0.640673] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0 [ 0.640716] PCI: Scanning bus 0000:01 [ 0.640766] pci 0000:01:00.0: found [10de:0402] class 000300 header type 00 [ 0.640811] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff] [ 0.640857] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.640902] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe5ffffff] [ 0.640946] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f] [ 0.640988] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.641070] PCI: Fixups for bus 0000:01 [ 0.641109] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.641149] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe7ffffff] [ 0.641191] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.641231] PCI: Bus scan for 0000:01 returning with max=01 [ 0.641272] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 [ 0.641315] PCI: Scanning bus 0000:02 [ 0.641374] PCI: Fixups for bus 0000:02 [ 0.641417] PCI: Bus scan for 0000:02 returning with max=02 [ 0.641458] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 0 [ 0.642117] PCI: Scanning bus 0000:03 [ 0.642177] pci 0000:03:00.0: found [197b:2363] class 000101 header type 00 [ 0.642220] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x140 [ 0.642308] pci 0000:03:00.0: reg 24 32bit mmio: [0xe9000000-0xe9001fff] [ 0.642381] pci 0000:03:00.0: PME# supported from D3hot [ 0.642423] pci 0000:03:00.0: PME# disabled [ 0.642496] pci 0000:03:00.1: found [197b:2363] class 000101 header type 00 [ 0.642537] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x140 [ 0.642586] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] [ 0.642632] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103] [ 0.642678] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] [ 0.642723] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303] [ 0.642769] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.642880] PCI: Fixups for bus 0000:03 [ 0.642919] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] [ 0.642960] pci 0000:00:1c.3: bridge 32bit mmio: [0xe9000000-0xe90fffff] [ 0.643003] PCI: Bus scan for 0000:03 returning with max=03 [ 0.643044] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 0 [ 0.643087] PCI: Scanning bus 0000:04 [ 0.643149] pci 0000:04:00.0: found [10ec:8168] class 000200 header type 00 [ 0.643197] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.643252] pci 0000:04:00.0: reg 18 64bit mmio: [0xe9110000-0xe9110fff] [ 0.643303] pci 0000:04:00.0: reg 20 64bit mmio: [0xe9100000-0xe910ffff] [ 0.643349] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.643421] pci 0000:04:00.0: supports D1 D2 [ 0.643459] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.643502] pci 0000:04:00.0: PME# disabled [ 0.643579] PCI: Fixups for bus 0000:04 [ 0.643618] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.643658] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.643702] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xe9100000-0xe91fffff] [ 0.643743] PCI: Bus scan for 0000:04 returning with max=04 [ 0.643784] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0 [ 0.643828] PCI: Scanning bus 0000:05 [ 0.643888] pci 0000:05:07.0: found [104c:8024] class 000c00 header type 00 [ 0.643935] pci 0000:05:07.0: reg 10 32bit mmio: [0xe9204000-0xe92047ff] [ 0.643980] pci 0000:05:07.0: reg 14 32bit mmio: [0xe9200000-0xe9203fff] [ 0.644054] pci 0000:05:07.0: supports D1 D2 [ 0.644093] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.644134] pci 0000:05:07.0: PME# disabled [ 0.644200] PCI: Fixups for bus 0000:05 [ 0.644238] pci 0000:00:1e.0: transparent bridge [ 0.644279] pci 0000:00:1e.0: bridge 32bit mmio: [0xe9200000-0xe92fffff] [ 0.644322] PCI: Bus scan for 0000:05 returning with max=05 [ 0.644363] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1 [ 0.644405] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 [ 0.644449] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 1 [ 0.644492] pci 0000:00:1c.4: scanning behind bridge, config 040400, pass 1 [ 0.644536] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1 [ 0.644578] PCI: Bus scan for 0000:00 returning with max=05 [ 0.644621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.644761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.644841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.644921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.644999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.657882] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.658354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.658881] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.659352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.659822] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.660360] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.660830] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.661300] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.661973] SCSI subsystem initialized [ 0.661973] libata version 3.00 loaded. [ 0.661973] usbcore: registered new interface driver usbfs [ 0.661973] usbcore: registered new interface driver hub [ 0.661973] usbcore: registered new device driver usb [ 0.661973] ACPI: WMI: Mapper loaded [ 0.661973] PCI: Using ACPI for IRQ routing [ 0.690009] Bluetooth: Core ver 2.14 [ 0.690059] NET: Registered protocol family 31 [ 0.690063] Bluetooth: HCI device and connection manager initialized [ 0.690104] Bluetooth: HCI socket layer initialized [ 0.690142] NetLabel: Initializing [ 0.690180] NetLabel: domain hash size = 128 [ 0.690218] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.690264] NetLabel: unlabeled traffic allowed by default [ 0.690337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.690509] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.720005] Switched to high resolution mode on CPU 0 [ 0.721700] Switched to high resolution mode on CPU 2 [ 0.721759] Switched to high resolution mode on CPU 1 [ 0.722003] Switched to high resolution mode on CPU 3 [ 0.750009] pnp: PnP ACPI init [ 0.750054] ACPI: bus type pnp registered [ 0.751849] pnp: PnP ACPI: found 12 devices [ 0.751888] ACPI: ACPI bus type pnp unregistered [ 0.751931] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.751972] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.752012] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.752053] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.752093] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.752134] system 00:01: ioport range 0x4c0-0x4ff could not be reserved [ 0.752177] system 00:08: ioport range 0x400-0x4bf has been reserved [ 0.752220] system 00:09: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.752263] system 00:0a: iomem range 0xccc00-0xcffff has been reserved [ 0.752303] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.752344] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.752385] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.752427] system 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved [ 0.752475] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.752531] system 00:0a: iomem range 0x100000-0xcfedffff could not be reserved [ 0.752580] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.752621] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.752662] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.752703] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.752744] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.752785] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.752826] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.757480] pci 0000:01:00.0: BAR 6: got res [0xe7000000-0xe701ffff] bus [0xe7000000-0xe701ffff] flags 0x27200 [ 0.757532] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.757572] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.757612] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff [ 0.757653] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.757703] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.757742] pci 0000:00:1c.0: IO window: disabled [ 0.757783] pci 0000:00:1c.0: MEM window: disabled [ 0.757823] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.757865] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.757905] pci 0000:00:1c.3: IO window: 0xc000-0xcfff [ 0.757947] pci 0000:00:1c.3: MEM window: 0xe9000000-0xe90fffff [ 0.757988] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.758030] pci 0000:04:00.0: BAR 6: got res [0xe9120000-0xe912ffff] bus [0xe9120000-0xe912ffff] flags 0x27200 [ 0.758081] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 [ 0.758121] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.758163] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff [ 0.758204] pci 0000:00:1c.4: PREFETCH window: 0x000000e9100000-0x000000e91fffff [ 0.758255] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.758295] pci 0000:00:1e.0: IO window: disabled [ 0.758336] pci 0000:00:1e.0: MEM window: 0xe9200000-0xe92fffff [ 0.758377] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.758422] alloc irq_desc for 16 on cpu 0 node 0 [ 0.758461] alloc kstat_irqs on cpu 0 node 0 [ 0.758501] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.758542] pci 0000:00:01.0: setting latency timer to 64 [ 0.758585] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.758627] pci 0000:00:1c.0: setting latency timer to 64 [ 0.758669] alloc irq_desc for 19 on cpu 0 node 0 [ 0.758708] alloc kstat_irqs on cpu 0 node 0 [ 0.758747] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.758789] pci 0000:00:1c.3: setting latency timer to 64 [ 0.758832] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.758874] pci 0000:00:1c.4: setting latency timer to 64 [ 0.758916] pci 0000:00:1e.0: setting latency timer to 64 [ 0.758956] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.758996] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.759037] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.759076] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff] [ 0.759116] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] [ 0.759157] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.759195] pci_bus 0000:02: resource 0 mem: [0x0-0x0] [ 0.759234] pci_bus 0000:02: resource 1 mem: [0x0-0x0] [ 0.759273] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 0.759312] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.759351] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.759391] pci_bus 0000:03: resource 1 mem: [0xe9000000-0xe90fffff] [ 0.759431] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.759469] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.759508] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.759548] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe8ffffff] [ 0.759588] pci_bus 0000:04: resource 2 mem: [0xe9100000-0xe91fffff] [ 0.759628] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 0.759667] pci_bus 0000:05: resource 0 mem: [0x0-0x0] [ 0.759706] pci_bus 0000:05: resource 1 mem: [0xe9200000-0xe92fffff] [ 0.759746] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 0.760398] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.760437] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.760495] NET: Registered protocol family 2 [ 0.860203] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.861134] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.864359] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.864964] TCP: Hash tables configured (established 524288 bind 65536) [ 0.865005] TCP reno registered [ 0.890115] NET: Registered protocol family 1 [ 0.890614] checking if image is initramfs... it is [ 2.666303] Freeing initrd memory: 55627k freed [ 2.692716] Scanning for low memory corruption every 60 seconds [ 2.692862] audit: initializing netlink socket (disabled) [ 2.692913] type=2000 audit(1260216258.690:1): initialized [ 2.699348] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.700414] VFS: Disk quotas dquot_6.5.2 [ 2.700490] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.700920] fuse init (API version 7.11) [ 2.701011] msgmni has been set to 11844 [ 2.701223] alg: No test for stdrng (krng) [ 2.701279] io scheduler noop registered [ 2.701319] io scheduler anticipatory registered [ 2.701357] io scheduler deadline registered [ 2.701436] io scheduler cfq registered (default) [ 2.701481] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.701523] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.701564] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.701606] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xba [ 2.701647] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.701687] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.701728] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.701768] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xba [ 2.701809] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.701849] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.701890] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.701943] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xba [ 2.701984] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x181 [ 2.702024] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702065] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702116] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xba [ 2.702157] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x181 [ 2.702197] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702238] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702288] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xba [ 2.702329] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x181 [ 2.702369] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702419] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702478] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xba [ 2.702525] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.702565] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702606] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702646] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xba [ 2.702687] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.702727] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702768] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702809] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xba [ 2.702849] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x181 [ 2.702890] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30 [ 2.702930] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x399 [ 2.702971] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xba [ 2.703011] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x181 [ 2.703052] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703092] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703133] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xba [ 2.703173] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.703214] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703254] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703305] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xba [ 2.703346] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x181 [ 2.703387] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703427] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703478] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xba [ 2.703519] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x181 [ 2.703559] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703600] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703651] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xba [ 2.703692] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x181 [ 2.703732] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703772] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703835] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xba [ 2.703876] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.703917] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.703957] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.703998] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xba [ 2.704039] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x181 [ 2.704079] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704119] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704160] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xba [ 2.704201] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x181 [ 2.704241] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704282] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704323] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xba [ 2.704363] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x181 [ 2.704404] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704444] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704485] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xba [ 2.704525] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x181 [ 2.704566] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704606] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704647] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xba [ 2.704688] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk+0x0/0x1ed [ 2.704734] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704774] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704815] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xba [ 2.704856] pci 0000:01:00.0: Boot video device [ 2.704895] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.704936] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.704976] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xba [ 2.705017] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 2.705058] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x399 [ 2.705098] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xba [ 2.705139] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.705179] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.705220] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xba [ 2.705260] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x30 [ 2.705301] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x399 [ 2.705342] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xba [ 2.705440] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.705509] alloc irq_desc for 24 on cpu 0 node 0 [ 2.705548] alloc kstat_irqs on cpu 0 node 0 [ 2.705591] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.705674] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.705750] alloc irq_desc for 25 on cpu 0 node 0 [ 2.705789] alloc kstat_irqs on cpu 0 node 0 [ 2.705830] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.705929] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 2.706006] alloc irq_desc for 26 on cpu 0 node 0 [ 2.706044] alloc kstat_irqs on cpu 0 node 0 [ 2.706085] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 2.706187] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 2.706263] alloc irq_desc for 27 on cpu 0 node 0 [ 2.706302] alloc kstat_irqs on cpu 0 node 0 [ 2.706342] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X [ 2.706449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.706965] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.707117] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.707167] ACPI: Power Button (FF) [PWRF] [ 2.707233] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.707283] ACPI: Power Button (CM) [PWRB] [ 2.707679] ACPI: SSDT CFEE7AD0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 2.707961] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.708120] processor ACPI_CPU:00: registered as cooling_device0 [ 2.708161] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.708406] ACPI: SSDT CFEE7F90, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 2.708742] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff8801af044f20), AE_ALREADY_EXISTS [ 2.708877] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 2.709140] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.709307] processor ACPI_CPU:01: registered as cooling_device1 [ 2.709349] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.709637] ACPI: SSDT CFEE80F0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311) [ 2.709997] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff8801af044fa0), AE_ALREADY_EXISTS [ 2.710142] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 2.710352] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 2.710510] processor ACPI_CPU:02: registered as cooling_device2 [ 2.710551] ACPI: Processor [CPU2] (supports 8 throttling states) [ 2.710812] ACPI: SSDT CFEE8250, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311) [ 2.711149] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PDC] (Node ffff8801af04b020), AE_ALREADY_EXISTS [ 2.711283] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 2.711516] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 2.711677] processor ACPI_CPU:03: registered as cooling_device3 [ 2.711719] ACPI: Processor [CPU3] (supports 8 throttling states) [ 2.803909] Linux agpgart interface v0.103 [ 2.803953] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.804644] brd: module loaded [ 2.804889] loop: module loaded [ 2.805096] Fixed MDIO Bus: probed [ 2.805750] PPP generic driver version 2.4.2 [ 2.805822] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.805886] Driver 'sd' needs updating - please use bus_type methods [ 2.805931] Driver 'sr' needs updating - please use bus_type methods [ 2.806006] ahci 0000:03:00.0: version 3.0 [ 2.806020] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.830031] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.830083] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.830134] ahci 0000:03:00.0: setting latency timer to 64 [ 2.830332] scsi0 : ahci [ 2.830447] scsi1 : ahci [ 2.830539] ata1: SATA max UDMA/133 abar m8192@...9000000 port 0xe9000100 irq 19 [ 2.830589] ata2: SATA max UDMA/133 abar m8192@...9000000 port 0xe9000180 irq 19 [ 3.180022] ata1: SATA link down (SStatus 0 SControl 300) [ 3.550021] ata2: SATA link down (SStatus 0 SControl 300) [ 3.570050] ata_piix 0000:00:1f.2: version 2.12 [ 3.570097] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.570155] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.570354] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.570463] scsi2 : ata_piix [ 3.570575] scsi3 : ata_piix [ 3.571146] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 3.571189] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 4.430053] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.430109] ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.496205] ata3.00: HPA detected: current 1953523055, native 1953525168 [ 4.496250] ata3.00: ATA-8: ST31000528AS, CC34, max UDMA/133 [ 4.496292] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.496474] ata3.01: ATA-7: ST3300831AS, 3.02, max UDMA/133 [ 4.496516] ata3.01: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.556223] ata3.00: configured for UDMA/133 [ 4.590299] ata3.01: configured for UDMA/133 [ 4.590423] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5 [ 4.590537] sd 2:0:0:0: [sda] 1953523055 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.590595] sd 2:0:0:0: [sda] Write Protect is off [ 4.590634] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.590688] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.590772] sd 2:0:0:0: [sda] 1953523055 512-byte hardware sectors: (1.00 TB/931 GiB) [ 4.590829] sd 2:0:0:0: [sda] Write Protect is off [ 4.590868] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.590921] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.590972] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 4.662355] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.662418] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.662495] scsi 2:0:1:0: Direct-Access ATA ST3300831AS 3.02 PQ: 0 ANSI: 5 [ 4.662606] sd 2:0:1:0: [sdb] 586072368 512-byte hardware sectors: (300 GB/279 GiB) [ 4.662665] sd 2:0:1:0: [sdb] Write Protect is off [ 4.662704] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.662758] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.662836] sd 2:0:1:0: [sdb] 586072368 512-byte hardware sectors: (300 GB/279 GiB) [ 4.662893] sd 2:0:1:0: [sdb] Write Protect is off [ 4.662932] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.662985] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.663036] sdb: sdb1 [ 4.682863] sd 2:0:1:0: [sdb] Attached SCSI disk [ 4.682925] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 5.540051] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.540108] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.600280] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 [ 5.600323] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.600384] ata4.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 5.620295] ata4.00: configured for UDMA/133 [ 5.660188] ata4.01: configured for UDMA/100 [ 5.660561] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 5.660668] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.660725] sd 3:0:0:0: [sdc] Write Protect is off [ 5.660764] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.660817] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.660899] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.660955] sd 3:0:0:0: [sdc] Write Protect is off [ 5.660995] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.661048] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.661099] sdc: sdc2 < sdc5 sdc6 sdc7 > sdc3 [ 5.733039] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.733101] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 5.734301] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 5.737903] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.737954] Uniform CD-ROM driver Revision: 3.20 [ 5.738060] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 5.738121] sr 3:0:1:0: Attached scsi generic sg3 type 5 [ 5.738178] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.738221] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 5.738416] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 5.738509] scsi4 : ata_piix [ 5.738615] scsi5 : ata_piix [ 5.739034] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 5.739077] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 6.090639] ata5: SATA link down (SStatus 0 SControl 300) [ 6.450638] ata6: SATA link down (SStatus 0 SControl 300) [ 6.450901] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 6.450944] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 6.451009] pata_jmicron 0000:03:00.1: enabling bus mastering [ 6.451052] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 6.451133] scsi6 : pata_jmicron [ 6.451208] scsi7 : pata_jmicron [ 6.451697] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 6.451738] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 6.781589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.781643] alloc irq_desc for 18 on cpu 0 node 0 [ 6.781682] alloc kstat_irqs on cpu 0 node 0 [ 6.781722] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.781769] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 6.781810] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.781882] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.785832] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 6.785881] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9305000 [ 6.800010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.800119] usb usb1: configuration #1 chosen from 1 choice [ 6.800180] hub 1-0:1.0: USB hub found [ 6.800221] hub 1-0:1.0: 6 ports detected [ 6.800328] alloc irq_desc for 23 on cpu 0 node 0 [ 6.800367] alloc kstat_irqs on cpu 0 node 0 [ 6.800407] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.800453] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.800493] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.800559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.804507] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.804554] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe9304000 [ 6.820006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.820101] usb usb2: configuration #1 chosen from 1 choice [ 6.820163] hub 2-0:1.0: USB hub found [ 6.820204] hub 2-0:1.0: 6 ports detected [ 6.820300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.820348] uhci_hcd: USB Universal Host Controller Interface driver [ 6.820418] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.820462] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6.820502] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.820566] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.820632] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 6.820720] usb usb3: configuration #1 chosen from 1 choice [ 6.820774] hub 3-0:1.0: USB hub found [ 6.820815] hub 3-0:1.0: 2 ports detected [ 6.820905] alloc irq_desc for 21 on cpu 0 node 0 [ 6.820944] alloc kstat_irqs on cpu 0 node 0 [ 6.820984] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 6.821027] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 6.821068] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.821137] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.821209] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 6.821302] usb usb4: configuration #1 chosen from 1 choice [ 6.821355] hub 4-0:1.0: USB hub found [ 6.821396] hub 4-0:1.0: 2 ports detected [ 6.821485] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.821529] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 6.821569] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 6.821633] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 6.821698] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 6.821785] usb usb5: configuration #1 chosen from 1 choice [ 6.821838] hub 5-0:1.0: USB hub found [ 6.821879] hub 5-0:1.0: 2 ports detected [ 6.821967] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.822011] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.822051] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.822711] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 6.822776] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 6.822863] usb usb6: configuration #1 chosen from 1 choice [ 6.822918] hub 6-0:1.0: USB hub found [ 6.822959] hub 6-0:1.0: 2 ports detected [ 6.823049] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.823092] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.823133] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.823197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 6.823262] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 6.823349] usb usb7: configuration #1 chosen from 1 choice [ 6.823407] hub 7-0:1.0: USB hub found [ 6.823447] hub 7-0:1.0: 2 ports detected [ 6.823537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.823580] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.823621] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.823683] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 6.823748] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 6.823840] usb usb8: configuration #1 chosen from 1 choice [ 6.823893] hub 8-0:1.0: USB hub found [ 6.823935] hub 8-0:1.0: 2 ports detected [ 6.824054] PNP: No PS/2 controller found. Probing ports directly. [ 6.824376] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.824420] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.843781] mice: PS/2 mouse device common for all mice [ 6.943809] rtc_cmos 00:04: RTC can wake from S4 [ 6.943884] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 6.943943] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 6.944042] device-mapper: uevent: version 1.0.3 [ 6.944129] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com [ 6.944262] device-mapper: multipath: version 1.0.5 loaded [ 6.944304] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.944514] cpuidle: using governor ladder [ 6.944700] cpuidle: using governor menu [ 6.944992] TCP cubic registered [ 6.945113] NET: Registered protocol family 10 [ 6.945427] lo: Disabled Privacy Extensions [ 6.945651] NET: Registered protocol family 17 [ 6.945699] Bluetooth: L2CAP ver 2.11 [ 6.945737] Bluetooth: L2CAP socket layer initialized [ 6.945776] Bluetooth: SCO (Voice Link) ver 0.6 [ 6.945815] Bluetooth: SCO socket layer initialized [ 6.945879] Bluetooth: RFCOMM socket layer initialized [ 6.945925] Bluetooth: RFCOMM TTY layer initialized [ 6.945967] Bluetooth: RFCOMM ver 1.10 [ 6.947638] Marking TSC unstable due to TSC halts in idle [ 6.951271] registered taskstats version 1 [ 6.951414] Magic number: 5:198:93 [ 6.951527] rtc_cmos 00:04: setting system clock to 2009-12-07 20:04:23 UTC (1260216263) [ 6.951582] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.951622] EDD information not available. [ 6.951696] Freeing unused kernel memory: 624k freed [ 6.951845] Write protecting the kernel read-only data: 6772k [ 7.045512] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.045579] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.045630] r8169 0000:04:00.0: enabling Mem-Wr-Inval [ 7.045681] r8169 0000:04:00.0: setting latency timer to 64 [ 7.045800] alloc irq_desc for 28 on cpu 0 node 0 [ 7.045842] alloc kstat_irqs on cpu 0 node 0 [ 7.045889] r8169 0000:04:00.0: irq 28 for MSI/MSI-X [ 7.046024] r8169 0000:04:00.0: Missing EEPROM signature: 0000 [ 7.046459] eth0: RTL8168c/8111c at 0xffffc20000c5c000, 00:1f:d0:9d:27:af, XID 3c4000c0 IRQ 28 [ 7.068759] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.130054] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[e9204000-e92047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 7.651956] kjournald starting. Commit interval 5 seconds [ 7.651980] EXT3-fs: mounted filesystem with ordered data mode. [ 7.772530] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 8.056786] usb 3-1: configuration #1 chosen from 1 choice [ 8.333788] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 8.450425] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007c2d6400001fd0] [ 8.524843] usb 5-1: configuration #1 chosen from 1 choice [ 8.800042] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 8.980869] usb 5-2: configuration #1 chosen from 1 choice [ 9.261291] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 9.434890] usb 8-1: configuration #1 chosen from 1 choice [ 9.436854] hub 8-1:1.0: USB hub found [ 9.438822] hub 8-1:1.0: 4 ports detected [ 9.721285] usb 8-2: new low speed USB device using uhci_hcd and address 3 [ 9.900922] usb 8-2: configuration #1 chosen from 1 choice [ 9.982826] usb 8-1.4: new low speed USB device using uhci_hcd and address 4 [ 10.132878] usb 8-1.4: configuration #1 chosen from 1 choice [ 12.958357] udev: starting version 147 [ 13.545994] nvidia: module license 'NVIDIA' taints kernel. [ 13.799818] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.799824] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.800187] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 14.220041] usbcore: registered new interface driver hiddev [ 14.238120] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3 [ 14.313867] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-2/input0 [ 14.328095] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input4 [ 14.375754] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.392623] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input0 [ 14.411531] Linux video capture interface: v2.00 [ 14.417145] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.1/input/input5 [ 14.432938] lp: driver loaded but no devices found [ 14.510156] generic-usb 0003:0A81:0205.0003: input,hidraw2: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-1.4/input1 [ 14.510186] usbcore: registered new interface driver usbhid [ 14.510189] usbhid: v2.6:USB HID core driver [ 14.672447] pwc: Philips webcam module version 10.0.13 loaded. [ 14.672449] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 14.672451] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 14.672452] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 14.672471] pwc: Logitech QuickCam 4000 Pro USB webcam detected. [ 14.672547] pwc: Registered as /dev/video0. [ 14.675806] usbcore: registered new interface driver Philips webcam [ 15.158552] alloc irq_desc for 22 on cpu 0 node 0 [ 15.158555] alloc kstat_irqs on cpu 0 node 0 [ 15.158560] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 15.158733] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.361076] usbcore: registered new interface driver snd-usb-audio [ 15.649258] Adding 6562544k swap on /dev/mapper/cryptoswap. Priority:-1 extents:1 across:6562544k [ 16.516327] EXT3 FS on sda8, internal journal [ 16.975508] r8169: eth0: link up [ 16.975513] r8169: eth0: link up [ 17.327586] kjournald starting. Commit interval 5 seconds [ 17.327604] EXT3-fs: mounted filesystem with ordered data mode. [ 17.375307] kjournald starting. Commit interval 5 seconds [ 17.381488] EXT3 FS on sda6, internal journal [ 17.381491] EXT3-fs: mounted filesystem with ordered data mode. [ 17.550320] kjournald starting. Commit interval 5 seconds [ 17.550346] EXT3-fs: mounted filesystem with ordered data mode. [ 17.570280] kjournald starting. Commit interval 5 seconds [ 17.570567] EXT3 FS on sdc6, internal journal [ 17.570569] EXT3-fs: mounted filesystem with ordered data mode. [ 19.008616] ppdev: user-space parallel port driver [ 20.715390] RPC: Registered udp transport module. [ 20.715392] RPC: Registered tcp transport module. [ 25.525338] kjournald starting. Commit interval 5 seconds [ 25.525361] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 25.525843] EXT3 FS on dm-1, internal journal [ 25.525848] EXT3-fs: mounted filesystem with ordered data mode. [ 27.371276] eth0: no IPv6 routers present ----------------------------------------------------------------------------- Volker -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists