Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32 (david@avalanche.xenontk.org) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #7 SMP PREEMPT Fri Dec 4 16:35:24 IST 2009 Command line: ro root=UUID=51cfa53f-6757-4c84-b802-c38f743220a2 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007dabf400 (usable) BIOS-e820: 000000007dabf400 - 000000007dac1400 (ACPI NVS) BIOS-e820: 000000007dac1400 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7dabf max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask 800000000 write-back 1 base 0E0000000 mask FE0000000 uncachable 2 base 07DC00000 mask FFFC00000 uncachable 3 base 07E000000 mask FFE000000 uncachable 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 000000007dc00000 - 0000000080000000 (usable) ==> (reserved) e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007dabf000 0000000000 - 007da00000 page 2M 007da00000 - 007dabf000 page 4k kernel direct mapping tables up to 7dabf000 @ 8000-c000 RAMDISK: 37ceb000 - 37fef42a ACPI: RSDP 00000000000fbdd0 00024 (v02 DELL ) ACPI: XSDT 000000007dac3e00 00054 (v01 DELL M09 27D90219 ASL 00000061) ACPI: FACP 000000007dac3c9c 000F4 (v04 DELL M09 27D90219 ASL 00000061) ACPI: DSDT 000000007dac4400 05170 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 000000007dad2c00 00040 ACPI: HPET 000000007dac3f00 00038 (v01 DELL M09 00000001 ASL 00000061) ACPI: APIC 000000007dac4000 00068 (v01 DELL M09 27D90219 ASL 00000047) ACPI: MCFG 000000007dac3fc0 0003E (v16 DELL M09 27D90219 ASL 00000061) ACPI: SLIC 000000007dac409c 00176 (v01 DELL M09 27D90219 ASL 00000061) ACPI: SSDT 000000007dac2363 0066C (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007dabf000 Bootmem setup node 0 0000000000000000-000000007dabf000 NODE_DATA [000000000000a000 - 000000000003dfff] bootmap [000000000003e000 - 000000000004db57] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007dabf000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001a84938] TEXT DATA BSS ==> [0001000000 - 0001a84938] #3 [0037ceb000 - 0037fef42a] RAMDISK ==> [0037ceb000 - 0037fef42a] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0001a85000 - 0001a851e8] BRK ==> [0001a85000 - 0001a851e8] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007dabf On node 0 totalpages: 514654 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 6982 pages used for memmap DMA32 zone: 503673 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:78000000) NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91800 r8192 d22888 u1048576 pcpu-alloc: s91800 r8192 d22888 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 507514 Policy zone: DMA32 Kernel command line: ro root=UUID=51cfa53f-6757-4c84-b802-c38f743220a2 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Memory: 2015468k/2059004k available (4360k kernel code, 388k absent, 43148k reserved, 3202k data, 1308k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:424 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1995.060 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.12 BogoMIPS (lpj=1995060) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.79 BogoMIPS (lpj=1994897) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7979.91 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 regulator: core version 0.5 Time: 22:17:02 Date: 12/09/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff] pci 0000:0c:00.0: supports D1 D2 pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68fc000-0xf68fffff] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] pci 0000:09:00.0: supports D1 D2 pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.2: bridge 32bit mmio: [0xf6800000-0xf68fffff] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6600000-0xf67fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x1000-0x1005 has been reserved system 00:09: ioport range 0x1008-0x100f has been reserved system 00:0a: ioport range 0xf400-0xf4fe has been reserved system 00:0a: ioport range 0x1006-0x1007 has been reserved system 00:0a: ioport range 0x100a-0x1059 could not be reserved system 00:0a: ioport range 0x1060-0x107f has been reserved system 00:0a: ioport range 0x1080-0x10bf has been reserved system 00:0a: ioport range 0x1100-0x111f has been reserved system 00:0a: ioport range 0x1010-0x102f has been reserved system 00:0a: ioport range 0x809-0x809 has been reserved system 00:0b: iomem range 0x0-0x9efff could not be reserved system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff has been reserved system 00:0b: iomem range 0x100000-0x7dabf3ff could not be reserved system 00:0b: iomem range 0x7dabf400-0x7dafffff could not be reserved system 00:0b: iomem range 0x7db00000-0x7dbfffff has been reserved system 00:0b: iomem range 0xffe00000-0xffffffff has been reserved system 00:0b: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0b: iomem range 0xfed1c800-0xfed1cfff has been reserved system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.2: IO window: 0xd000-0xdfff pci 0000:00:1c.2: MEM window: 0xf6800000-0xf68fffff pci 0000:00:1c.2: PREFETCH window: 0x00000080600000-0x000000807fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xf6600000-0xf67fffff pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff] pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff] pci_bus 0000:09: resource 2 pref mem [0x80600000-0x807fffff] pci_bus 0000:0d: resource 0 io: [0xc000-0xcfff] pci_bus 0000:0d: resource 1 mem: [0xf6600000-0xf67fffff] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-0xf01fffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3089k freed cpu0(2) debug files 135 cpu1(2) debug files 135 audit: initializing netlink socket (disabled) type=2000 audit(1260397022.438:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3942 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] ACPI: SSDT 000000007dac29cf 0023F (v01 PmRef BspIst 00003000 INTL 20050624) ACPI: SSDT 000000007dac2de5 005C6 (v01 PmRef BspCst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 Switching to clocksource hpet ACPI: SSDT 000000007dac2c0e 001D7 (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 000000007dac33ab 0008D (v01 PmRef ApCst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (50 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 i915 0000:00:02.0: irq 28 for MSI/MSI-X [drm] set up 31M of stolen space ACPI: Battery Slot [BAT0] (battery present) [drm] DAC-6: set mode 1920x1080 c [drm] LVDS-8: set mode 1366x768 1f Console: switching to colour frame buffer device 170x48 fb0: inteldrmfb frame buffer device registered panic notifier input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input4 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 29 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 29 ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 29 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Magic number: 5:766:299 Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD2500BEVT-75ZCT2, 11.01A11, max UDMA/133 ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-7 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: New USB device found, idVendor=0bda, idProduct=0158 usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-5: Product: USB2.0-CRW usb 1-5: Manufacturer: Generic usb 1-5: SerialNumber: 20071114173400000 usb 1-5: configuration #1 chosen from 1 choice usb 1-6: new high speed USB device using ehci_hcd and address 4 usb 1-6: New USB device found, idVendor=0c45, idProduct=63ee usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 1-6: Product: Integrated_Webcam_1.3M usb 1-6: Manufacturer:  usb 1-6: configuration #1 chosen from 1 choice input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input7 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD11, max UDMA/100 ata2.00: configured for UDMA/100 usb 3-1: new full speed USB device using uhci_hcd and address 2 scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: BCM2046B1 usb 3-1: Manufacturer: Broadcom usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected ata5: SATA link down (SStatus 0 SControl 300) usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: New USB device found, idVendor=062a, idProduct=0000 usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 6-1: configuration #1 chosen from 1 choice input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input8 generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-1/input0 usb 3-1.1: new full speed USB device using uhci_hcd and address 3 ata6: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 1308k freed Write protecting the kernel read-only data: 6396k usb 3-1.1: New USB device found, idVendor=413c, idProduct=8161 usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1.1: configuration #1 chosen from 1 choice input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input9 generic-usb 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1/input0 usb 3-1.2: new full speed USB device using uhci_hcd and address 4 usb 3-1.2: New USB device found, idVendor=413c, idProduct=8162 usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1.2: configuration #1 chosen from 1 choice input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input10 generic-usb 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.2/input0 EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1260397026.520:2): selinux=0 auid=4294967295 ses=4294967295 udev: starting version 141 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 input: PC Speaker as /devices/platform/pcspkr/input/input11 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' sky2 driver version 1.25 sky2 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:09:00.0: setting latency timer to 64 sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 sky2 0000:09:00.0: irq 30 for MSI/MSI-X sky2 eth0: addr 00:23:ae:1e:f9:90 ACPI: WMI: Mapper loaded Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Linux video capture interface: v2.00 usb 3-1.3: new full speed USB device using uhci_hcd and address 5 wl: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 wl 0000:0c:00.0: setting latency timer to 64 uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:63ee) input: Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usb 3-1.3: New USB device found, idVendor=413c, idProduct=8160 usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.3: Product: Dell Wireless 365 Bluetooth Module usb 3-1.3: Manufacturer: Dell Computer Corp usb 3-1.3: configuration #1 chosen from 1 choice lib80211_crypt: registered algorithm 'TKIP' eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x1f ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2974: stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13 input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 device-mapper: multipath: version 1.1.0 loaded EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1 across:2048248k usb-storage: device scan complete scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready eth1: no IPv6 routers present fuse init (API version 7.13)