| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4B219E28.8080601@sgi.com>
Date: Thu, 10 Dec 2009 17:19:36 -0800
From: Mike Travis <travis@....com>
To: Ingo Molnar <mingo@...e.hu>
CC: Thomas Gleixner <tglx@...utronix.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Roland Dreier <rdreier@...co.com>,
"H. Peter Anvin" <hpa@...or.com>, Jack Steiner <steiner@....com>,
x86@...nel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: Limit the number of processor bootup messages
x86: Limit the number of processor bootup messages
When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.
This set of patches limits the number of repetitious messages
which contain no additional information. Much of this information
is obtainable from the /proc and /sysfs. Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.
The new cpu bootup sequence for system_state == SYSTEM_BOOTING:
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
...
Booting Node 3, Processors #56 #57 #58 #59 #60 #61 #62 #63 Ok.
Brought up 64 CPUs
After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:
Booting Node %d Processor %d APIC 0x%x
Status of the following lines:
CPU: Physical Processor ID: printed once (for boot cpu)
CPU: Processor Core ID: printed once (for boot cpu)
CPU: Hyper-Threading is disabled printed once (for boot cpu)
CPU: Thermal monitoring enabled printed once (for boot cpu)
CPU %d/0x%x -> Node %d: removed
CPU %d is now offline: only if system_state == RUNNING
Initializing CPU#%d: KERN_DEBUG
Signed-off-by: Mike Travis <travis@....com>
---
arch/x86/kernel/cpu/addon_cpuid_features.c | 15 +++++----
arch/x86/kernel/cpu/amd.c | 2 -
arch/x86/kernel/cpu/common.c | 8 +++--
arch/x86/kernel/cpu/intel.c | 2 -
arch/x86/kernel/cpu/mcheck/therm_throt.c | 4 +-
arch/x86/kernel/smpboot.c | 45 +++++++++++++++++++----------
6 files changed, 47 insertions(+), 29 deletions(-)
--- linux.orig/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ linux/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -74,6 +74,7 @@
unsigned int eax, ebx, ecx, edx, sub_index;
unsigned int ht_mask_width, core_plus_mask_width;
unsigned int core_select_mask, core_level_siblings;
+ static bool printed;
if (c->cpuid_level < 0xb)
return;
@@ -127,12 +128,14 @@
c->x86_max_cores = (core_level_siblings / smp_num_siblings);
-
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
- if (c->x86_max_cores > 1)
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
+ if (!printed) {
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ if (c->x86_max_cores > 1)
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
+ printed = 1;
+ }
return;
#endif
}
--- linux.orig/arch/x86/kernel/cpu/amd.c
+++ linux/arch/x86/kernel/cpu/amd.c
@@ -375,8 +375,6 @@
node = nearby_node(apicid);
}
numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
#endif
}
--- linux.orig/arch/x86/kernel/cpu/common.c
+++ linux/arch/x86/kernel/cpu/common.c
@@ -427,6 +427,7 @@
#ifdef CONFIG_X86_HT
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
+ static bool printed;
if (!cpu_has(c, X86_FEATURE_HT))
return;
@@ -442,7 +443,7 @@
smp_num_siblings = (ebx & 0xff0000) >> 16;
if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
goto out;
}
@@ -469,11 +470,12 @@
((1 << core_bits) - 1);
out:
- if ((c->x86_max_cores * smp_num_siblings) > 1) {
+ if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
c->cpu_core_id);
+ printed = 1;
}
#endif
}
@@ -1115,7 +1117,7 @@
if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask))
panic("CPU#%d already initialized!\n", cpu);
- printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+ pr_debug("Initializing CPU#%d\n", cpu);
clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
--- linux.orig/arch/x86/kernel/cpu/intel.c
+++ linux/arch/x86/kernel/cpu/intel.c
@@ -266,8 +266,6 @@
if (node == NUMA_NO_NODE || !node_online(node))
node = first_node(node_online_map);
numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
#endif
}
--- linux.orig/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ linux/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -339,8 +339,8 @@
l = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
- cpu, tm2 ? "TM2" : "TM1");
+ printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
+ tm2 ? "TM2" : "TM1");
/* enable thermal throttle processing */
atomic_set(&therm_throt_en, 1);
--- linux.orig/arch/x86/kernel/smpboot.c
+++ linux/arch/x86/kernel/smpboot.c
@@ -671,6 +671,26 @@
complete(&c_idle->done);
}
+/* reduce the number of lines printed when booting a large cpu count system */
+static void __cpuinit announce_cpu(int cpu, int apicid)
+{
+ static int current_node = -1;
+ int node = cpu_to_node(cpu);
+
+ if (system_state == SYSTEM_BOOTING) {
+ if (node != current_node) {
+ if (current_node > (-1))
+ pr_cont(" Ok.\n");
+ current_node = node;
+ pr_info("Booting Node %3d, Processors ", node);
+ }
+ pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
+ return;
+ } else
+ pr_info("Booting Node %d Processor %d APIC 0x%x\n",
+ node, cpu, apicid);
+}
+
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
@@ -736,9 +756,8 @@
/* start_ip had better be page-aligned! */
start_ip = setup_trampoline();
- /* So we see what's up */
- printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n",
- cpu, apicid, start_ip);
+ /* So we see what's up */
+ announce_cpu(cpu, apicid);
/*
* This grunge runs the startup process for
@@ -787,21 +806,17 @@
udelay(100);
}
- if (cpumask_test_cpu(cpu, cpu_callin_mask)) {
- /* number CPUs logically, starting from 1 (BSP is 0) */
- pr_debug("OK.\n");
- printk(KERN_INFO "CPU%d: ", cpu);
- print_cpu_info(&cpu_data(cpu));
- pr_debug("CPU has booted.\n");
- } else {
+ if (cpumask_test_cpu(cpu, cpu_callin_mask))
+ pr_debug("CPU%d: has booted.\n", cpu);
+ else {
boot_error = 1;
if (*((volatile unsigned char *)trampoline_base)
== 0xA5)
/* trampoline started but...? */
- printk(KERN_ERR "Stuck ??\n");
+ pr_err("CPU%d: Stuck ??\n", cpu);
else
/* trampoline code not run */
- printk(KERN_ERR "Not responding.\n");
+ pr_err("CPU%d: Not responding.\n", cpu);
if (apic->inquire_remote_apic)
apic->inquire_remote_apic(apicid);
}
@@ -1291,14 +1306,16 @@
for (i = 0; i < 10; i++) {
/* They ack this in play_dead by setting CPU_DEAD */
if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk(KERN_INFO "CPU %d is now offline\n", cpu);
+ if (system_state == SYSTEM_RUNNING)
+ pr_info("CPU %u is now offline\n", cpu);
+
if (1 == num_online_cpus())
alternatives_smp_switch(0);
return;
}
msleep(100);
}
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+ pr_err("CPU %u didn't die...\n", cpu);
}
void play_dead_common(void)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists