| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1260574122-10676-47-git-send-email-gregkh@suse.de>
Date: Fri, 11 Dec 2009 15:28:31 -0800
From: Greg Kroah-Hartman <gregkh@...e.de>
To: linux-kernel@...r.kernel.org
Cc: Alan Cox <alan@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH 47/58] tty: moxa: Use more tty_port ops
From: Alan Cox <alan@...ux.intel.com>
Rework a few bits of this into tty_port format
Signed-off-by: Alan Cox <alan@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/char/moxa.c | 137 ++++++++-------------------------------------------
1 files changed, 21 insertions(+), 116 deletions(-)
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index dd0083b..d8bcbed 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -206,8 +206,9 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct tty_struct *);
+static void moxa_shutdown(struct tty_port *);
static int moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, int);
/*
* moxa board interface functions:
*/
@@ -409,6 +410,8 @@ static const struct tty_operations moxa_ops = {
static const struct tty_port_operations moxa_port_ops = {
.carrier_raised = moxa_carrier_raised,
+ .dtr_rts = moxa_dtr_rts,
+ .shutdown = moxa_shutdown,
};
static struct tty_driver *moxaDriver;
@@ -1112,14 +1115,12 @@ static void __exit moxa_exit(void)
module_init(moxa_init);
module_exit(moxa_exit);
-static void moxa_close_port(struct tty_struct *tty)
+static void moxa_shutdown(struct tty_port *port)
{
- struct moxa_port *ch = tty->driver_data;
- moxa_shut_down(tty);
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortDisable(ch);
MoxaPortFlushData(ch, 2);
- ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- tty->driver_data = NULL;
- tty_port_tty_set(&ch->port, NULL);
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
}
static int moxa_carrier_raised(struct tty_port *port)
@@ -1133,39 +1134,13 @@ static int moxa_carrier_raised(struct tty_port *port)
return dcd;
}
-static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
- struct moxa_port *ch)
+static void moxa_dtr_rts(struct tty_port *port, int onoff)
{
- struct tty_port *port = &ch->port;
- DEFINE_WAIT(wait);
- int retval = 0;
- u8 dcd;
-
- while (1) {
- prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp)) {
-#ifdef SERIAL_DO_RESTART
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- dcd = tty_port_carrier_raised(port);
- if (dcd)
- break;
-
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- finish_wait(&port->open_wait, &wait);
-
- return retval;
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortLineCtrl(ch, onoff, onoff);
}
+
static int moxa_open(struct tty_struct *tty, struct file *filp)
{
struct moxa_board_conf *brd;
@@ -1194,6 +1169,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
ch->port.count++;
tty->driver_data = ch;
tty_port_tty_set(&ch->port, tty);
+ mutex_lock(&ch->port.mutex);
if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
@@ -1202,57 +1178,21 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
MoxaSetFifo(ch, ch->type == PORT_16550A);
ch->port.flags |= ASYNC_INITIALIZED;
}
+ mutex_unlock(&ch->port.mutex);
mutex_unlock(&moxa_openlock);
- retval = 0;
- if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty))
- retval = moxa_block_till_ready(tty, filp, ch);
- mutex_lock(&moxa_openlock);
- if (retval) {
- if (ch->port.count) /* 0 means already hung up... */
- if (--ch->port.count == 0)
- moxa_close_port(tty);
- } else
- ch->port.flags |= ASYNC_NORMAL_ACTIVE;
- mutex_unlock(&moxa_openlock);
-
+ retval = tty_port_block_til_ready(&ch->port, tty, filp);
+ if (retval == 0)
+ set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags);
return retval;
}
static void moxa_close(struct tty_struct *tty, struct file *filp)
{
- struct moxa_port *ch;
- int port;
-
- port = tty->index;
- if (port == MAX_PORTS || tty_hung_up_p(filp))
- return;
-
- mutex_lock(&moxa_openlock);
- ch = tty->driver_data;
- if (ch == NULL)
- goto unlock;
- if (tty->count == 1 && ch->port.count != 1) {
- printk(KERN_WARNING "moxa_close: bad serial port count; "
- "tty->count is 1, ch->port.count is %d\n", ch->port.count);
- ch->port.count = 1;
- }
- if (--ch->port.count < 0) {
- printk(KERN_WARNING "moxa_close: bad serial port count, "
- "device=%s\n", tty->name);
- ch->port.count = 0;
- }
- if (ch->port.count)
- goto unlock;
-
+ struct moxa_port *ch = tty->driver_data;
ch->cflag = tty->termios->c_cflag;
- if (ch->port.flags & ASYNC_INITIALIZED) {
- moxa_setup_empty_event(tty);
- tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
- }
-
- moxa_close_port(tty);
-unlock:
+ mutex_lock(&moxa_openlock);
+ tty_port_close(&ch->port, tty, filp);
mutex_unlock(&moxa_openlock);
}
@@ -1300,14 +1240,6 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
struct moxa_port *ch = tty->driver_data;
int chars;
- /*
- * Sigh...I have to check if driver_data is NULL here, because
- * if an open() fails, the TTY subsystem eventually calls
- * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
- * routine. And since the open() failed, we return 0 here. TDJ
- */
- if (ch == NULL)
- return 0;
lock_kernel();
chars = MoxaPortTxQueue(ch);
if (chars) {
@@ -1436,15 +1368,8 @@ static void moxa_hangup(struct tty_struct *tty)
mutex_lock(&moxa_openlock);
ch = tty->driver_data;
- if (ch == NULL) {
- mutex_unlock(&moxa_openlock);
- return;
- }
- ch->port.count = 0;
- moxa_close_port(tty);
+ tty_port_hangup(&ch->port);
mutex_unlock(&moxa_openlock);
-
- wake_up_interruptible(&ch->port.open_wait);
}
static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
@@ -1597,26 +1522,6 @@ static void moxa_setup_empty_event(struct tty_struct *tty)
spin_unlock_bh(&moxa_lock);
}
-static void moxa_shut_down(struct tty_struct *tty)
-{
- struct moxa_port *ch = tty->driver_data;
-
- if (!(ch->port.flags & ASYNC_INITIALIZED))
- return;
-
- MoxaPortDisable(ch);
-
- /*
- * If we're a modem control device and HUPCL is on, drop RTS & DTR.
- */
- if (C_HUPCL(tty))
- MoxaPortLineCtrl(ch, 0, 0);
-
- spin_lock_bh(&moxa_lock);
- ch->port.flags &= ~ASYNC_INITIALIZED;
- spin_unlock_bh(&moxa_lock);
-}
-
/*****************************************************************************
* Driver level functions: *
*****************************************************************************/
--
1.6.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists