| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <dd18b0c30912151454l1aa7fb97g951483993ab42502@mail.gmail.com> Date: Tue, 15 Dec 2009 14:54:39 -0800 From: Justin Mattock <justinmattock@...il.com> To: xorg@...edesktop.org, Linux Kernel Mailing List <linux-kernel@...r.kernel.org> Subject: [drm] nouveau iMac crashes and burns I had figured this would happen, but was curious to see if this new bad boy would work. (probably why fedora 12 doesnt boot as well). basically the system freezes during boot once drn nouveau is loaded. here's dmesg captured with firescope:(a bit long) <6>[ 6.001461] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502) <6>[ 6.006567] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input4 <6>[ 6.006643] usbcore: registered new interface driver uvcvideo <6>[ 6.006644] USB Video Class driver (v0.1.0) <6>[ 6.062422] nouveau 0000:02:00.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23 <7>[ 6.075927] nouveau 0000:02:00.0: setting latency timer to 64 <6>[ 6.078287] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x094700a1) <6>[ 6.092826] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN <6>[ 6.175238] [drm] nouveau 0000:02:00.0: ... appears to be valid <6>[ 6.199990] [drm] nouveau 0000:02:00.0: BIT BIOS found <6>[ 6.224262] [drm] nouveau 0000:02:00.0: Bios version 62.94.74.00 <4>[ 6.247464] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported <6>[ 6.270847] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 <6>[ 6.294284] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 <6>[ 6.317755] [drm] nouveau 0000:02:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff <6>[ 6.317769] usb 1-1.2: new low speed USB device using ehci_hcd and address 5 <6>[ 6.364963] [drm] nouveau 0000:02:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 <6>[ 6.388685] [drm] nouveau 0000:02:00.0: 2: 0x00001231: type 0x31 idx 2 tag 0x07 <6>[ 6.411250] [drm] nouveau 0000:02:00.0: 3: 0x01100331: type 0x31 idx 3 tag 0xff <6>[ 6.433337] [drm] nouveau 0000:02:00.0: 4: 0x01100446: type 0x46 idx 4 tag 0xff <6>[ 6.455141] [drm] nouveau 0000:02:00.0: 5: 0x02000546: type 0x46 idx 5 tag 0xff <6>[ 6.476717] [drm] nouveau 0000:02:00.0: 6: 0x00410631: type 0x31 idx 6 tag 0x51 <6>[ 6.498117] [drm] nouveau 0000:02:00.0: 7: 0x00410746: type 0x46 idx 7 tag 0x51 <6>[ 6.519136] [drm] nouveau 0000:02:00.0: 8: 0x00020846: type 0x46 idx 8 tag 0x52 <6>[ 6.540124] [drm] nouveau 0000:02:00.0: 9: 0x00000900: type 0x00 idx 9 tag 0xff <5>[ 6.560838] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000113 00010034 <5>[ 6.581250] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 040142a6 0f220010 <5>[ 6.601240] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04014242 00020010 <6>[ 6.612124] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD216 <6>[ 6.643094] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 <6>[ 6.654659] apple 0003:05AC:021D.0001: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input0 <6>[ 6.663076] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input6 <6>[ 6.663279] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD685 <6>[ 6.668019] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE64E <6>[ 6.668025] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE76F <6>[ 6.671605] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA96 <6>[ 6.671606] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAFB <4>[ 6.692024] [drm] nouveau 0000:02:00.0: 0xEAFB: Condition still not met after 20ms, skipping following opcodes <6>[ 6.692030] [drm] nouveau 0000:02:00.0: 0xB45C: parsing output script 0 <6>[ 6.692032] [drm] nouveau 0000:02:00.0: 0xBB62: parsing output script 0 <6>[ 6.692034] [drm] nouveau 0000:02:00.0: 0xB8A4: parsing output script 0 <6>[ 6.772776] [TTM] Zone kernel: Available graphics memory: 2016034 kiB. <6>[ 6.772793] [drm] nouveau 0000:02:00.0: 512 MiB VRAM <6>[ 6.805881] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input7 <6>[ 6.815359] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) <6>[ 6.831344] nouveau 0000:02:00.0: firmware: requesting nouveau/nv94.ctxprog <6>[ 6.831853] apple 0003:05AC:021D.0002: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input1 <3>[ 6.891531] [drm] nouveau 0000:02:00.0: No ctxprog for NV94 <6>[ 6.913304] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 <6>[ 6.913328] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.913333] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.913337] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.913341] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <--------cut *this message goes on for a while -----------> <6>[ 6.914479] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.914483] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.914487] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.914491] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.914494] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915488] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915491] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915495] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915500] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915503] [drm] nouveau 0000:02:00.0: PFIFO_INTR 0x00000010 - Ch 127 <6>[ 6.915506] [drm] nouveau 0000:02:00.0: PFIFO still angry after 101 spins, halt <6>[ 8.540685] usb 1-1.3: new low speed USB device using ehci_hcd and address 6 <6>[ 8.545087] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 <6>[ 8.640144] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input8 <6>[ 8.642258] apple 0003:05AC:0304.0003: input: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:04.1-1.3/input0 <7>[ 8.798067] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... <7>[ 9.056250] ieee1394: Speed probe of node 0-00:1023 yields S400 <7>[ 9.056708] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e] <7>[ 9.057063] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0023dffffe8cd104] <3>[ 10.166575] [drm] nouveau 0000:02:00.0: PRAMIN flush timeout machine is an iMac with the gt130 card I loaded mesa,dri, but didn't find any firmware(if any) for /lib/firmware -- Justin P. Mattock -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists