| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <64bb37e0912191154n4a7ea5benbb3da57f1aabdbe6@mail.gmail.com>
Date: Sat, 19 Dec 2009 20:54:13 +0100
From: Torsten Kaiser <just.for.lkml@...glemail.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Tony Vroon <tony@...x.net>,
Robert Hancock <hancockrwd@...il.com>,
Jeff Garzik <jgarzik@...hat.com>,
Vivek Mahajan <vivek.mahajan@...escale.com>
Subject: Re: Linux 2.6.33-rc1
On Fri, Dec 18, 2009 at 3:05 AM, Linus Torvalds
<torvalds@...ux-foundation.org> wrote:
> Please give it a good testing, so that we can start figuring out the
> inevitably regressions,
2.6.33 works for me with the default settings, but if I try to active
MSI for my sata ports, writes to my hard disks start to fail.
MSI support was added to sata_sil24 for 2.6.33 with commit
dae77214fa71898b84514e43721fb7bf260b026a .
MSI support for sata_nv is older (commit
51c8949950647afeeb897e08dd75ad99078adb50 ), but today I retried it an
it also fails.
Both default to off, but can be easily actived with sata_sil24.msi=1 /
sata_nv.msi=1.
My system itself should support MSI, as my network cards (2x tg3) and
video card (X300 radeon) do work correctly with MSI enabled.
Differences from the dmesg for sata_sil24:
normal boot:
[ 2.516332] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI
19 (level, low) -> IRQ 19
[ 2.525167] scsi0 : sata_sil24
[ 2.528372] scsi1 : sata_sil24
[ 2.531548] ata1: SATA max UDMA/100 host m128@...feffc00 port
0xefef8000 irq 19
[ 2.538880] ata2: SATA max UDMA/100 host m128@...feffc00 port
0xefefa000 irq 19
with sata_sil24.msi=1:
[ 3.326435] sata_sil24 0000:04:00.0: version 1.1
[ 3.331111] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI
19 (level, low) -> IRQ 19
[ 3.339742] alloc irq_desc for 29 on node 0
[ 3.341086] alloc kstat_irqs on node 0
[ 3.348104] sata_sil24 0000:04:00.0: irq 29 for MSI/MSI-X
[ 3.353544] sata_sil24 0000:04:00.0: Using MSI
[ 3.358004] sata_sil24 0000:04:00.0: setting latency timer to 64
[ 3.364281] scsi0 : sata_sil24
[ 3.367512] scsi1 : sata_sil24
[ 3.370686] ata1: SATA max UDMA/100 host m128@...feffc00 port
0xefef8000 irq 29
[ 3.378017] ata2: SATA max UDMA/100 host m128@...feffc00 port
0xefefa000 irq 29
The system starts to boot, but early in the userspace boot sequence
(probably after the first write accesses) access to the disks fails:
[ 56.039444] Loglevel set to 6
[ 73.082542] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 73.093594] ata2.00: failed command: READ FPDMA QUEUED
[ 73.102649] ata2.00: cmd 60/10:00:aa:93:89/00:00:26:00:00/40 tag 0
ncq 8192 in
[ 73.102653] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 73.120050] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 73.120061] ata1.00: failed command: READ FPDMA QUEUED
[ 73.120074] ata1.00: cmd 60/00:00:02:69:b4/01:00:26:00:00/40 tag 0
ncq 131072 in
[ 73.120077] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 73.120083] ata1.00: status: { DRDY }
[ 73.120100] ata1: controller in dubious state, performing PORT_RST
[ 73.186584] ata2.00: status: { DRDY }
[ 73.194452] ata2: controller in dubious state, performing PORT_RST
[ 80.380057] ata1.00: qc timeout (cmd 0xec)
[ 80.460046] ata2.00: qc timeout (cmd 0xec)
[ 80.483769] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 80.494237] ata1.00: revalidation failed (errno=-5)
[ 80.503388] ata1: controller in dubious state, performing PORT_RST
[ 80.560026] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 80.570329] ata2.00: revalidation failed (errno=-5)
[ 80.579274] ata2: controller in dubious state, performing PORT_RST
[ 92.770064] ata1.00: qc timeout (cmd 0xec)
[ 92.840039] ata2.00: qc timeout (cmd 0xec)
[ 92.870025] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 92.880293] ata1.00: revalidation failed (errno=-5)
[ 92.889332] ata1: limiting SATA link speed to 1.5 Gbps
[ 92.898630] ata1: controller in dubious state, performing PORT_RST
[ 92.940040] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 92.950384] ata2.00: revalidation failed (errno=-5)
[ 92.959454] ata2: limiting SATA link speed to 1.5 Gbps
[ 92.968820] ata2: controller in dubious state, performing PORT_RST
[ 125.160111] ata1.00: qc timeout (cmd 0xec)
[ 125.230039] ata2.00: qc timeout (cmd 0xec)
[ 125.260025] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 125.270227] ata1.00: revalidation failed (errno=-5)
[ 125.279118] ata1.00: disabled
[ 125.286045] ata1: controller in dubious state, performing PORT_RST
[ 125.330034] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 125.340221] ata2.00: revalidation failed (errno=-5)
[ 125.349170] ata2.00: disabled
[ 125.356174] ata2: controller in dubious state, performing PORT_RST
[ 127.550078] ata1.00: device reported invalid CHS sector 0
[ 127.559741] end_request: I/O error, dev sda, sector 649357570
[ 127.569739] raid1: sda3: rescheduling sector 609355720
[ 127.579052] raid1: sda3: rescheduling sector 609355968
[ 127.588396] end_request: I/O error, dev sda, sector 20000711
[ 127.598257] end_request: I/O error, dev sda, sector 20000711
[ 127.608052] md: super_written gets error=-5, uptodate=0
[ 127.608244] raid1: Disk failure on sda1, disabling device.
[ 127.608244] raid1: Operation continuing on 1 devices.
[ 127.620054] ata2.00: device reported invalid CHS sector 0
[ 127.620123] end_request: I/O error, dev sdb, sector 646550442
[ 127.620131] raid1: sdb3: rescheduling sector 606548592
[ 127.620184] end_request: I/O error, dev sdb, sector 20000711
[ 127.620194] end_request: I/O error, dev sdb, sector 20000711
[ 127.620200] md: super_written gets error=-5, uptodate=0
[ 127.620244] end_request: I/O error, dev sdb, sector 1250258514
[ 127.620253] end_request: I/O error, dev sdb, sector 1250258514
[ 127.620260] md: super_written gets error=-5, uptodate=0
[ 127.620265] raid1: Disk failure on sdb3, disabling device.
[ 127.620267] raid1: Operation continuing on 1 devices.
[ 127.620302] end_request: I/O error, dev sdb, sector 1250258530
[ 127.620312] end_request: I/O error, dev sdb, sector 1250258530
(snip)
[ 128.226010] end_request: I/O error, dev sda, sector 343164306
[ 128.234891] end_request: I/O error, dev sda, sector 645188325
[ 128.243714] Device dm-0, XFS metadata write error block 0x12090018 in dm-0
[ 128.253779] I/O error in filesystem ("dm-0") meta-data dev dm-0
block 0x241261a3
("xlog_iodone") error 5 buf count 31232
[ 128.268481] xfs_force_shutdown(dm-0,0x2) called from line 968 of
file fs/xfs/xfs_log
.c. Return address = 0xffffffff811978fe
[ 128.283555] Filesystem "dm-0": Log I/O Error Detected. Shutting
down filesystem: dm
-0
[ 128.294999] Please umount the filesystem, and rectify the problem(s)
[ 128.305410] end_request: I/O error, dev sda, sector 344029066
After the shutdown of the root fs, the system can't even load agetty
and the only thing left is to reboot via SysRq.
Differences from the dmesg for sata_nv:
normal boot:
[ 3.385490] sata_nv 0000:00:05.0: version 3.5
[ 3.390199] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 3.395967] alloc irq_desc for 23 on node 0
[ 3.400003] alloc kstat_irqs on node 0
[ 3.404318] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 3.412632] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 3.417471] sata_nv 0000:00:05.0: setting latency timer to 64
[ 3.423387] scsi2 : sata_nv
[ 3.426378] scsi3 : sata_nv
[ 3.429399] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23
[ 3.436579] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23
[ 3.444055] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 3.449822] alloc irq_desc for 22 on node 0
[ 3.453752] alloc kstat_irqs on node 0
[ 3.458175] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22
(level, low) -> IRQ 22
[ 3.466487] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 3.471341] sata_nv 0000:00:05.1: setting latency timer to 64
[ 3.477223] scsi4 : sata_nv
[ 3.480191] scsi5 : sata_nv
[ 3.483198] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22
[ 3.491455] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22
[ 3.500021] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 3.506897] alloc irq_desc for 21 on node 0
[ 3.511264] alloc kstat_irqs on node 0
[ 3.517542] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21
(level, low) -> IRQ 21
[ 3.527049] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 3.533128] sata_nv 0000:00:05.2: setting latency timer to 64
[ 3.540261] scsi6 : sata_nv
[ 3.544479] scsi7 : sata_nv
[ 3.548753] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
[ 3.557238] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
with sata_nv.msi=1:
[ 3.357305] sata_nv 0000:00:05.0: version 3.5
[ 3.361994] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 3.367762] alloc irq_desc for 23 on node 0
[ 3.371694] alloc kstat_irqs on node 0
[ 3.376116] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 3.384430] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 3.389273] sata_nv 0000:00:05.0: Using MSI
[ 3.393502] alloc irq_desc for 29 on node 0
[ 3.397875] alloc kstat_irqs on node 0
[ 3.401836] sata_nv 0000:00:05.0: irq 29 for MSI/MSI-X
[ 3.406992] sata_nv 0000:00:05.0: setting latency timer to 64
[ 3.412898] scsi2 : sata_nv
[ 3.415886] scsi3 : sata_nv
[ 3.418908] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 29
[ 3.426089] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 29
[ 3.433551] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 3.439315] alloc irq_desc for 22 on node 0
[ 3.443263] alloc kstat_irqs on node 0
[ 3.447667] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22
(level, low) -> IRQ 22
[ 3.455982] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 3.460835] sata_nv 0000:00:05.1: Using MSI
[ 3.465039] alloc irq_desc for 30 on node 0
[ 3.469408] alloc kstat_irqs on node 0
[ 3.473379] sata_nv 0000:00:05.1: irq 30 for MSI/MSI-X
[ 3.479572] sata_nv 0000:00:05.1: setting latency timer to 64
[ 3.486532] scsi4 : sata_nv
[ 3.490563] scsi5 : sata_nv
[ 3.494639] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 30
[ 3.502921] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 30
[ 3.511524] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 3.518447] alloc irq_desc for 21 on node 0
[ 3.521260] alloc kstat_irqs on node 0
[ 3.529194] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21
(level, low) -> IRQ 21
[ 3.538748] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 3.544870] sata_nv 0000:00:05.2: Using MSI
[ 3.550367] alloc irq_desc for 31 on node 0
[ 3.556036] alloc kstat_irqs on node 0
[ 3.561318] sata_nv 0000:00:05.2: irq 31 for MSI/MSI-X
[ 3.567808] sata_nv 0000:00:05.2: setting latency timer to 64
[ 3.575070] scsi6 : sata_nv
[ 3.579396] scsi7 : sata_nv
[ 3.583808] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 31
[ 3.592405] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 31
When I start to write to the disk attached to the first port (ata3)
the following happens:
[ 437.011295] ata3: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1
[ 437.022710] ata3: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0
[ 437.022714] dhfis 0x1 dmafis 0x0 sdbfis 0x0
[ 437.044529] ata3: ATA_REG 0x40 ERR_REG 0x0
[ 437.044534] ata3: tag : dhfis dmafis sdbfis sacitve
[ 437.044540] ata3: tag 0x0: 1 0 0 1
[ 437.044557] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 437.044566] ata3.00: failed command: WRITE FPDMA QUEUED
[ 437.044578] ata3.00: cmd 61/d8:00:17:6d:39/01:00:00:00:00/40 tag 0
ncq 241664 out
[ 437.044582] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 437.044587] ata3.00: status: { DRDY }
[ 469.040046] ata3: EH in SWNCQ mode,QC:qc_active 0x3E sactive 0x3E
[ 469.050969] ata3: SWNCQ:qc_active 0x6 defer_bits 0x38 last_issue_tag 0x2
[ 469.050973] dhfis 0x2 dmafis 0x0 sdbfis 0x0
[ 469.071578] ata3: ATA_REG 0x40 ERR_REG 0x0
[ 469.071582] ata3: tag : dhfis dmafis sdbfis sacitve
[ 469.071587] ata3: tag 0x1: 1 0 0 1
[ 469.071592] ata3: tag 0x2: 0 0 0 1
[ 469.071609] ata3.00: exception Emask 0x0 SAct 0x3e SErr 0x0 action 0x6 frozen
[ 469.071617] ata3.00: failed command: WRITE FPDMA QUEUED
[ 469.071629] ata3.00: cmd 61/18:08:07:10:39/00:00:00:00:00/40 tag 1
ncq 12288 out
[ 469.071633] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 469.071638] ata3.00: status: { DRDY }
[ 469.071643] ata3.00: failed command: WRITE FPDMA QUEUED
[ 469.071652] ata3.00: cmd 61/20:10:d7:13:39/00:00:00:00:00/40 tag 2
ncq 16384 out
[ 469.071656] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 469.071661] ata3.00: status: { DRDY }
[ 469.071665] ata3.00: failed command: WRITE FPDMA QUEUED
[ 469.071675] ata3.00: cmd 61/20:18:c7:1f:39/00:00:00:00:00/40 tag 3
ncq 16384 out
[ 469.071678] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 469.071683] ata3.00: status: { DRDY }
[ 469.071687] ata3.00: failed command: WRITE FPDMA QUEUED
[ 469.071697] ata3.00: cmd 61/30:20:0f:3b:39/00:00:00:00:00/40 tag 4
ncq 24576 out
[ 469.071701] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 469.071705] ata3.00: status: { DRDY }
[ 469.071710] ata3.00: failed command: WRITE FPDMA QUEUED
[ 469.071720] ata3.00: cmd 61/58:28:8f:3a:3d/02:00:00:00:00/40 tag 5
ncq 307200 out
[ 469.071723] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 469.071728] ata3.00: status: { DRDY }
[ 469.811913] ata3.00: device reported invalid CHS sector 0
[ 469.822053] ata3.00: device reported invalid CHS sector 0
[ 469.832066] ata3.00: device reported invalid CHS sector 0
[ 469.832072] ata3.00: device reported invalid CHS sector 0
[ 469.832092] ata3.00: device reported invalid CHS sector 0
[ 500.040052] ata3: EH in SWNCQ mode,QC:qc_active 0x1F sactive 0x1F
[ 500.050748] ata3: SWNCQ:qc_active 0x3 defer_bits 0x1C last_issue_tag 0x1
[ 500.050752] dhfis 0x1 dmafis 0x0 sdbfis 0x0
[ 500.070826] ata3: ATA_REG 0x40 ERR_REG 0x0
[ 500.070830] ata3: tag : dhfis dmafis sdbfis sacitve
[ 500.070835] ata3: tag 0x0: 1 0 0 1
[ 500.070839] ata3: tag 0x1: 0 0 0 1
[ 500.070851] ata3.00: NCQ disabled due to excessive errors
[ 500.070857] ata3.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6 frozen
[ 500.070864] ata3.00: failed command: WRITE FPDMA QUEUED
[ 500.070875] ata3.00: cmd 61/58:00:8f:3a:3d/02:00:00:00:00/40 tag 0
ncq 307200 out
[ 500.070879] res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 500.070884] ata3.00: status: { DRDY }
[ 500.070889] ata3.00: failed command: WRITE FPDMA QUEUED
[ 500.070899] ata3.00: cmd 61/30:08:0f:3b:39/00:00:00:00:00/40 tag 1
ncq 24576 out
[ 500.070902] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 500.070907] ata3.00: status: { DRDY }
[ 500.070911] ata3.00: failed command: WRITE FPDMA QUEUED
[ 500.070921] ata3.00: cmd 61/20:10:c7:1f:39/00:00:00:00:00/40 tag 2
ncq 16384 out
[ 500.070924] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 500.070929] ata3.00: status: { DRDY }
[ 500.070934] ata3.00: failed command: WRITE FPDMA QUEUED
[ 500.070943] ata3.00: cmd 61/20:18:d7:13:39/00:00:00:00:00/40 tag 3
ncq 16384 out
[ 500.070947] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 500.070952] ata3.00: status: { DRDY }
[ 500.070956] ata3.00: failed command: WRITE FPDMA QUEUED
[ 500.070966] ata3.00: cmd 61/18:20:07:10:39/00:00:00:00:00/40 tag 4
ncq 12288 out
[ 500.070969] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 500.070974] ata3.00: status: { DRDY }
[ 500.708720] ata3.00: device reported invalid CHS sector 0
[ 500.718685] ata3.00: device reported invalid CHS sector 0
[ 500.728469] ata3.00: device reported invalid CHS sector 0
[ 500.728474] ata3.00: device reported invalid CHS sector 0
With sata_nv.msi=1 the output of /proc/interrupts is:
CPU0 CPU1 CPU2 CPU3
0: 37 0 0 4 IO-APIC-edge timer
1: 0 84 0 1823 IO-APIC-edge i8042
4: 0 0 58 185 IO-APIC-edge serial
7: 1 0 0 0 IO-APIC-edge
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 0 4 IO-APIC-edge i8042
14: 0 0 0 0 IO-APIC-edge pata_amd
15: 0 0 0 0 IO-APIC-edge pata_amd
16: 0 0 0 3 IO-APIC-fasteoi ohci1394
19: 4171 2 1 4644 IO-APIC-fasteoi
sata_sil24, bttv0, Bt87x audio
20: 0 0 0 2 IO-APIC-fasteoi
ehci_hcd:usb1
23: 0 0 133 209 IO-APIC-fasteoi
ohci_hcd:usb2
28: 1720 0 12 1473 PCI-MSI-edge radeon
29: 1645 0 3 248 PCI-MSI-edge sata_nv
30: 0 0 0 0 PCI-MSI-edge sata_nv
31: 0 0 0 0 PCI-MSI-edge sata_nv
32: 0 0 0 137 PCI-MSI-edge HDA Intel
33: 0 0 0 3 PCI-MSI-edge eth0
34: 5 0 1 37 PCI-MSI-edge eth1
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 10578 8061 8095 11323 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance
monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 5943 5782 7845 5965 Rescheduling interrupts
CAL: 2047 40 227 36 Function call interrupts
TLB: 227 1173 203 1035 TLB shootdowns
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 1
MIS: 0
Normal,working config, without any MSI commandline options:
CPU0 CPU1 CPU2 CPU3
0: 36 0 0 14 IO-APIC-edge timer
1: 0 0 4 9318 IO-APIC-edge i8042
4: 0 0 825 183 IO-APIC-edge serial
7: 1 0 0 0 IO-APIC-edge
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 0 0 0 4 IO-APIC-edge i8042
14: 0 0 0 0 IO-APIC-edge pata_amd
15: 0 0 0 0 IO-APIC-edge pata_amd
16: 0 0 0 3 IO-APIC-fasteoi ohci1394
19: 47808 4 2 4508 IO-APIC-fasteoi
sata_sil24, bttv0, Bt87x audio
20: 0 0 1 1 IO-APIC-fasteoi
ehci_hcd:usb1
21: 0 0 0 0 IO-APIC-fasteoi sata_nv
22: 0 0 0 0 IO-APIC-fasteoi sata_nv
23: 282 19539 2 267 IO-APIC-fasteoi
sata_nv, ohci_hcd:usb2
28: 70439 0 10 1250 PCI-MSI-edge radeon
29: 1 700 0 140 PCI-MSI-edge HDA Intel
30: 0 0 0 3 PCI-MSI-edge eth0
31: 97810 0 0 37 PCI-MSI-edge eth1
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 127366 116789 99269 60557 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance
monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 234954 290789 54777 55492 Rescheduling interrupts
CAL: 8085 36613 56971 38870 Function call interrupts
TLB: 659 1395 1054 1785 TLB shootdowns
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 8 8 8 8 Machine check polls
ERR: 1
MIS: 0
Hardware I'm using:
2x 2218 Opterons with a NVidia MCP55 chipset, the Sil24-Chip is part
of the mainboard.
-[0000:00]-+-00.0 nVidia Corporation MCP55 Memory Controller
+-01.0 nVidia Corporation MCP55 LPC Bridge
+-01.1 nVidia Corporation MCP55 SMBus
+-02.0 nVidia Corporation MCP55 USB Controller
+-02.1 nVidia Corporation MCP55 USB Controller
+-04.0 nVidia Corporation MCP55 IDE
+-05.0 nVidia Corporation MCP55 SATA Controller
+-05.1 nVidia Corporation MCP55 SATA Controller
+-05.2 nVidia Corporation MCP55 SATA Controller
+-06.0-[05]--+-06.0 Brooktree Corporation Bt878 Video Capture
| +-06.1 Brooktree Corporation Bt878 Audio Capture
| \-08.0 Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
+-06.1 nVidia Corporation MCP55 High Definition Audio
+-0b.0-[04]----00.0 Silicon Image, Inc. SiI 3132 Serial
ATA Raid II Controller
+-0c.0-[03]----00.0 Broadcom Corporation NetXtreme BCM5754
Gigabit Ethernet PCI Express
+-0d.0-[02]----00.0 Broadcom Corporation NetXtreme BCM5754
Gigabit Ethernet PCI Express
+-0f.0-[01]--+-00.0 ATI Technologies Inc RV370 5B60
[Radeon X300 (PCIE)]
| \-00.1 ATI Technologies Inc RV370 [Radeon X300SE]
+-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
+-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
+-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
+-19.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
+-19.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
+-19.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
\-19.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Also strange:
[ 1.630081] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.635605] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.641162] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.646691] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.652247] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.657781] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.663348] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.668889] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.674458] pci 0000:00:00.0: Found enabled HT MSI Mapping
and:
[ 5.061998] EDAC MC: Ver: 2.1.0 Dec 18 2009
[ 5.062186] EDAC amd64_edac: Ver: 3.3.0 Dec 18 2009
[ 5.062235] EDAC amd64: ECC is enabled by BIOS.
[ 5.062297] EDAC amd64: ECC is enabled by BIOS.
[ 5.128332] EDAC MC: Rev F or later detected
[ 5.134186] EDAC amd64: amd64_read_mc_registers: error reading F2x190.
[ 5.142290] EDAC amd64: amd64_read_mc_registers: error reading F2x194.
[ 5.150355] EDAC MC: DCT0 chip selects:
[ 5.150357] EDAC MC: 0: 512MB 1: 512MB
[ 5.150358] EDAC MC: 2: 0MB 3: 0MB
[ 5.150361] EDAC MC: 4: 0MB 5: 0MB
[ 5.150362] EDAC MC: 6: 0MB 7: 0MB
[ 5.150519] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV
0000:00:18.2
[ 5.150522] EDAC MC: Rev F or later detected
[ 5.150530] EDAC amd64: amd64_read_mc_registers: error reading F2x190.
[ 5.150532] EDAC amd64: amd64_read_mc_registers: error reading F2x194.
[ 5.150533] EDAC MC: DCT0 chip selects:
[ 5.150535] EDAC MC: 0: 512MB 1: 512MB
[ 5.150536] EDAC MC: 2: 0MB 3: 0MB
[ 5.150537] EDAC MC: 4: 0MB 5: 0MB
[ 5.150539] EDAC MC: 6: 0MB 7: 0MB
[ 5.150664] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV
0000:00:19.2
[ 5.150742] EDAC PCI0: Giving out device to module 'amd64_edac'
controller 'EDAC PCI
controller': DEV '0000:00:18.2' (POLLED)
The system has 4x 1GB RAM sticks (2 on each CPU).
And there is no line like 'EDAC PCI0' for the DRAM controller of the
second CPU (19.2). Is that normal?
Torsten
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists