Message-ID: <4B309AED.7080601@gmail.com>
Date:	Tue, 22 Dec 2009 11:09:49 +0100
From:	Eric Dumazet <eric.dumazet@...il.com>
To:	Kevin Constantine <kevin.constantine@...il.com>
CC:	netdev@...r.kernel.org,
	linux kernel <linux-kernel@...r.kernel.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Rusty Russell <rusty@...tcorp.com.au>
Subject: Re: Kernel Panics in the network stack

Le 12/12/2009 02:49, Kevin Constantine a écrit :
> Kevin Constantine wrote:
>> On 12/11/2009 03:55 PM, Kevin Constantine wrote:
>>> Kevin Constantine wrote:
>>>> On 12/11/2009 01:58 PM, Eric Dumazet wrote:
>>>>> Le 11/12/2009 22:50, Kevin Constantine a écrit :
>>>>>> On 12/11/2009 01:39 PM, Eric Dumazet wrote:
>>>>>>> Le 11/12/2009 22:09, Kevin Constantine a écrit :
>>>>>>>> Hey Everyone-
>>>>>>>>
>>>>>>>> I've been playing with an ARM based linuxstamp
>>>>>>>> http://opencircuits.com/Linuxstamp, and I've been seeing kernel
>>>>>>>> panics
>>>>>>>> with both 2.6.28.3, and 2.6.30 within an hour or so of turning the
>>>>>>>> linuxstamp on. The stack traces always seem to point at functions
>>>>>>>> related to networking. I've pasted a couple of the crash outputs
>>>>>>>> below.
>>>>>>>> The linuxstamp isn't typically doing anything when the crashes
>>>>>>>> occur,
>>>>>>>> in fact it'll crash even if I haven't logged in.
>>>>>>>>
>>>>>>>> If I ifconfig the interface down, the linuxstamp stays up
>>>>>>>> indefinitely.
>>>>>>>> Any pointers in one direction or another would be much appreciated.
>>>>>>>>
>>>>>>>> I'm not sure if this is the right audience to help out or if the
>>>>>>>> arm
>>>>>>>> lists might be better. But in any event, any help would be really
>>>>>>>> appreciated.
>>>>>>>>
>>>>>>>>
>>>>>>>> linuxstamp login: Unable to handle kernel paging request at virtual
>>>>>>>> address 183cb7b0
>>>>>>>> pgd = c0004000
>>>>>>>> [183cb7b0] *pgd=00000000
>>>>>>>> Internal error: Oops: 0 [#1] PREEMPT
>>>>>>>> Modules linked in:
>>>>>>>> CPU: 0 Not tainted (2.6.30-00002-g0148992 #13)
>>>>>>>> PC is at 0x183cb7b0
>>>>>>>> LR is at __udp4_lib_rcv+0x43c/0x72c
>>>>>>>
>>>>>>> Could you disassemble your vmlinux file, __udp4_lib_rcv function
>>>>>>> around LR
>>>>>>> <c024ff4c>, to see which function was called ? This function then
>>>>>>> called
>>>>>>> a wrong pointer (0x183cb7b0 not a kernel pointer)
>>>>>>>
>>>>>>> Maybe a kernel stack corruption, or bad ram, ...
>>>>>>
>>>>>> The vmlinux file I'm using has probably changed a number of times
>>>>>> since
>>>>>> then. I'll get a fresh stack trace and disassemble that one.
>>
> 
> Here's yet another crash.  I recompiled the kernel to include slab
> debug.  This crash seems to implicate the at91ether driver.
> 
> 
> 
> debian login: Unable to handle kernel paging request at virtual address
> 60000013
> pgd = c0004000
> [60000013] *pgd=00000000
> Internal error: Oops: 805 [#1] PREEMPT
> Modules linked in:
> CPU: 0    Not tainted  (2.6.30-00002-g0148992 #17)
> PC is at memset+0xb8/0xc0
> LR is at __alloc_skb+0x64/0x108
> pc : [<c017c118>]    lr : [<c0211a64>]    psr: 20000013
> sp : c0383ee8  ip : 5a5a5a5a  fp : ffc00048
> r10: 00000000  r9 : 00000002  r8 : c021268c
> r7 : c1c06d20  r6 : 000000e0  r5 : c1db2000  r4 : 60000013
> r3 : 00000003  r2 : 00000000  r1 : 00000088  r0 : 60000013
> Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
> Control: c000717f  Table: 21d78000  DAC: 00000017
> Process swapper (pid: 0, stack limit = 0xc0382268)
> Stack: (0xc0383ee8 to 0xc0384000)
> 3ee0:                   c0045164 c1c91e60 000000be c1d38800 c1d38b00
> 00000006
> 3f00: ffc00000 c021268c 00000004 c01c90d4 00000001 c1c91e60 00000000
> 00000000
> 3f20: 00000018 00000001 c0382000 2001cf90 00000000 c006112c 00000000
> c1c91e60
> 3f40: c038a37c 00000018 00000002 c0062e7c 00000018 00000000 00000018
> c0022050
> 3f60: 00000000 ffffffff fefff000 c0022a3c 00000000 00000001 00000080
> 60000013
> 3f80: c00243a4 c0382000 c0385ebc c00243a4 c03a7c68 41129200 2001cf90
> 00000000
> 3fa0: fefff800 c0383fb8 c00243e0 c00243ec 60000013 ffffffff c00243a4
> c0024368
> 3fc0: c03af314 c03a7c30 c001ed30 c0385d08 2001cfc4 c00088d4 c0008434
> 00000000
> 3fe0: 00000000 c001ed30 c0007175 c03a7c98 c001f134 20008034 00000000
> 00000000
> [<c017c118>] (memset+0xb8/0xc0) from [<c1d38800>] (0xc1d38800)
> Code: ba00001d e3530002 b4c02001 d4c02001 (e4c02001)
> Kernel panic - not syncing: Fatal exception in interrupt
> [<c002895c>] (unwind_backtrace+0x0/0xdc) from [<c02b4c20>]
> (panic+0x3c/0x120)
> [<c02b4c20>] (panic+0x3c/0x120) from [<c0026e60>] (die+0x154/0x180)
> [<c0026e60>] (die+0x154/0x180) from [<c0029848>]
> (__do_kernel_fault+0x68/0x80)
> [<c0029848>] (__do_kernel_fault+0x68/0x80) from [<c0029a74>]
> (do_page_fault+0x214/0x234)
> [<c0029a74>] (do_page_fault+0x214/0x234) from [<c0022244>]
> (do_DataAbort+0x30/0x90)
> [<c0022244>] (do_DataAbort+0x30/0x90) from [<c00229e0>]
> (__dabt_svc+0x40/0x60)
> Exception stack(0xc0383ea0 to 0xc0383ee8)
> 3ea0: 60000013 00000088 00000000 00000003 60000013 c1db2000 000000e0
> c1c06d20
> 3ec0: c021268c 00000002 00000000 ffc00048 5a5a5a5a c0383ee8 c0211a64
> c017c118
> 3ee0: 20000013 ffffffff
> [<c00229e0>] (__dabt_svc+0x40/0x60) from [<c0211a64>]
> (__alloc_skb+0x64/0x108)
> [<c0211a64>] (__alloc_skb+0x64/0x108) from [<c021268c>]
> (dev_alloc_skb+0x1c/0x44)
> [<c021268c>] (dev_alloc_skb+0x1c/0x44) from [<c01c90d4>]
> (at91ether_interrupt+0x44/0x1b8)
> [<c01c90d4>] (at91ether_interrupt+0x44/0x1b8) from [<c006112c>]
> (handle_IRQ_event+0x40/0x110)
> [<c006112c>] (handle_IRQ_event+0x40/0x110) from [<c0062e7c>]
> (handle_level_irq+0xbc/0x134)
> [<c0062e7c>] (handle_level_irq+0xbc/0x134) from [<c0022050>]
> (_text+0x50/0x78)
> [<c0022050>] (_text+0x50/0x78) from [<c0022a3c>] (__irq_svc+0x3c/0x80)
> Exception stack(0xc0383f70 to 0xc0383fb8)
> 3f60:                                     00000000 00000001 00000080
> 60000013
> 3f80: c00243a4 c0382000 c0385ebc c00243a4 c03a7c68 41129200 2001cf90
> 00000000
> 3fa0: fefff800 c0383fb8 c00243e0 c00243ec 60000013 ffffffff
> [<c0022a3c>] (__irq_svc+0x3c/0x80) from [<c00243e0>]
> (default_idle+0x3c/0x54)
> [<c00243e0>] (default_idle+0x3c/0x54) from [<c0024368>]
> (cpu_idle+0x48/0x84)
> [<c0024368>] (cpu_idle+0x48/0x84) from [<c00088d4>]
> (start_kernel+0x208/0x254)
> [<c00088d4>] (start_kernel+0x208/0x254) from [<20008034>] (0x20008034)
> 
> 

After many private mails exchanged with Kevin, 
it seems we have many unrelated corruptions happening in ARM, possibly at IRQ
handling or whatever. Its more likely an ARM problem more than a network stack issue.

I found an old commit mentioning a problem with LDM instruction that could be
interrupted/ restarted with a base register already changed -> we load registers with garbage.

author	Catalin Marinas <catalin.marinas@....com>	
	Thu, 12 Jan 2006 16:53:51 +0000 (16:53 +0000)
committer	Russell King <rmk+kernel@....linux.org.uk>	
	Thu, 12 Jan 2006 16:53:51 +0000 (16:53 +0000)
commit	90303b102353302e84758f245906368907e6a23b


Patch from Catalin Marinas

If the low interrupt latency mode is enabled for the CPU (from ARMv6
onwards), the ldm/stm instructions are no longer atomic. An ldm instruction
restoring the sp and pc registers can be interrupted immediately after sp
was updated but before the pc. If this happens, the CPU restores the base
register to the value before the ldm instruction but if the base register
is not sp, the interrupt routine will corrupt the stack and the restarted
ldm instruction will load garbage.

Note that future ARM cores might always run in the low interrupt latency
mode.

Signed-off-by: Catalin Marinas <catalin.marinas@....com>
Signed-off-by: Russell King <rmk+kernel@....linux.org.uk>

I found one instance of LDM instruction in 2.6.30 that could have same problem :

__switch_to:

...
	ldm r4, {r4, r5, r6, r7, r8, r9, sl, fp, sp, pc}


Kevin, any chance you can try 2.6.33 (or 2.6.32) instead of 2.6.30 ?

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists