Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33-rc1 (root@hp-dl785g5-01.rhts.eng.bos.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #4 SMP Tue Dec 22 07:54:59 EST 2009 Command line: ro root=/dev/mapper/vg_hpdl785g501-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=ttyS1,115200 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfd4c000 (usable) BIOS-e820: 00000000cfd4c000 - 00000000cfd56000 (ACPI data) BIOS-e820: 00000000cfd56000 - 00000000cfd57000 (usable) BIOS-e820: 00000000cfd57000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000202ffff000 (usable) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.5 present. No AGP bridge found last_pfn = 0x202ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000002030000000 aka 131840M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfd57 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f4f80] f4f80 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfd57000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfd57000 page 4k kernel direct mapping tables up to cfd57000 @ 8000-b000 init_memory_mapping: 0000000100000000-000000202ffff000 0100000000 - 2000000000 page 1G 2000000000 - 202fe00000 page 2M 202fe00000 - 202ffff000 page 4k kernel direct mapping tables up to 202ffff000 @ a000-d000 RAMDISK: 32055000 - 37fef008 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 00000000cfd4d380 000BC (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: FACP 00000000cfd4d480 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) ACPI: DSDT 00000000cfd4d580 039C5 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 00000000cfd4c100 00040 ACPI: SPCR 00000000cfd4c140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 00000000cfd4c1c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 00000000cfd4c200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: SPMI 00000000cfd4c240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: ERST 00000000cfd4c280 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 00000000cfd4c480 001EA (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 00000000cfd4c700 004C0 (v01 AMD FAM_F_10 00000002 AMD 00000001) ACPI: FFFF 00000000cfd4cf00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: BERT 00000000cfd4d080 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: HEST 00000000cfd4d0c0 0018C (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: SLIT 00000000cfd4d280 0006C (v01 HP ProLiant 00000001 00000000) ACPI: SSDT 00000000cfd50f80 00103 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 00000000cfd510c0 0056F (v03 HP pci1cmn 00000002 INTL 20061109) ACPI: SSDT 00000000cfd51640 00098 (v03 HP CRSPCI1 00000002 HP 00000001) ACPI: SSDT 00000000cfd51700 003FD (v03 HP pci2pcie 00000002 INTL 20061109) ACPI: SSDT 00000000cfd51b00 0006E (v03 HP CRSPCI2 00000002 HP 00000001) ACPI: SSDT 00000000cfd51b80 003F7 (v03 HP pci3pcie 00000002 INTL 20061109) ACPI: SSDT 00000000cfd51f80 0006E (v03 HP CRSPCI3 00000002 HP 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 0 -> APIC 0x02 -> Node 0 SRAT: PXM 0 -> APIC 0x03 -> Node 0 SRAT: PXM 0 -> APIC 0x04 -> Node 0 SRAT: PXM 0 -> APIC 0x05 -> Node 0 SRAT: PXM 1 -> APIC 0x08 -> Node 1 SRAT: PXM 1 -> APIC 0x09 -> Node 1 SRAT: PXM 1 -> APIC 0x0a -> Node 1 SRAT: PXM 1 -> APIC 0x0b -> Node 1 SRAT: PXM 1 -> APIC 0x0c -> Node 1 SRAT: PXM 1 -> APIC 0x0d -> Node 1 SRAT: PXM 2 -> APIC 0x10 -> Node 2 SRAT: PXM 2 -> APIC 0x11 -> Node 2 SRAT: PXM 2 -> APIC 0x12 -> Node 2 SRAT: PXM 2 -> APIC 0x13 -> Node 2 SRAT: PXM 2 -> APIC 0x14 -> Node 2 SRAT: PXM 2 -> APIC 0x15 -> Node 2 SRAT: PXM 3 -> APIC 0x18 -> Node 3 SRAT: PXM 3 -> APIC 0x19 -> Node 3 SRAT: PXM 3 -> APIC 0x1a -> Node 3 SRAT: PXM 3 -> APIC 0x1b -> Node 3 SRAT: PXM 3 -> APIC 0x1c -> Node 3 SRAT: PXM 3 -> APIC 0x1d -> Node 3 SRAT: PXM 4 -> APIC 0x20 -> Node 4 SRAT: PXM 4 -> APIC 0x21 -> Node 4 SRAT: PXM 4 -> APIC 0x22 -> Node 4 SRAT: PXM 4 -> APIC 0x23 -> Node 4 SRAT: PXM 4 -> APIC 0x24 -> Node 4 SRAT: PXM 4 -> APIC 0x25 -> Node 4 SRAT: PXM 5 -> APIC 0x28 -> Node 5 SRAT: PXM 5 -> APIC 0x29 -> Node 5 SRAT: PXM 5 -> APIC 0x2a -> Node 5 SRAT: PXM 5 -> APIC 0x2b -> Node 5 SRAT: PXM 5 -> APIC 0x2c -> Node 5 SRAT: PXM 5 -> APIC 0x2d -> Node 5 SRAT: PXM 6 -> APIC 0x30 -> Node 6 SRAT: PXM 6 -> APIC 0x31 -> Node 6 SRAT: PXM 6 -> APIC 0x32 -> Node 6 SRAT: PXM 6 -> APIC 0x33 -> Node 6 SRAT: PXM 6 -> APIC 0x34 -> Node 6 SRAT: PXM 6 -> APIC 0x35 -> Node 6 SRAT: PXM 7 -> APIC 0x38 -> Node 7 SRAT: PXM 7 -> APIC 0x39 -> Node 7 SRAT: PXM 7 -> APIC 0x3a -> Node 7 SRAT: PXM 7 -> APIC 0x3b -> Node 7 SRAT: PXM 7 -> APIC 0x3c -> Node 7 SRAT: PXM 7 -> APIC 0x3d -> Node 7 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d0000000 SRAT: Node 0 PXM 0 100000000-430000000 SRAT: Node 1 PXM 1 430000000-830000000 SRAT: Node 2 PXM 2 830000000-c30000000 SRAT: Node 3 PXM 3 c30000000-1030000000 SRAT: Node 4 PXM 4 1030000000-1430000000 SRAT: Node 5 PXM 5 1430000000-1830000000 SRAT: Node 6 PXM 6 1830000000-1c30000000 SRAT: Node 7 PXM 7 1c30000000-2030000000 NUMA: Allocated memnodemap from c000 - 4c640 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000430000000 NODE_DATA [000000000004c640 - 000000000006563f] bootmap [0000000000100000 - 0000000000185fff] pages 86 (15 early reservations) ==> bootmem [0000000000 - 0430000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00029b82b8] TEXT DATA BSS ==> [0001000000 - 00029b82b8] #2 [0032055000 - 0037fef008] RAMDISK ==> [0032055000 - 0037fef008] #3 [00029b9000 - 00029b9114] BRK ==> [00029b9000 - 00029b9114] #4 [00000f4f90 - 0000100000] BIOS reserved ==> [00000f4f90 - 0000100000] #5 [00000f4f80 - 00000f4f90] MP-table mpf ==> [00000f4f80 - 00000f4f90] #6 [000009f400 - 00000e4000] BIOS reserved ==> [000009f400 - 00000e4000] #7 [00000e476c - 00000f4f80] BIOS reserved ==> [00000e476c - 00000f4f80] #8 [00000e4000 - 00000e476c] MP-table mpc ==> [00000e4000 - 00000e476c] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #12 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000] #13 [0000007000 - 000000706c] ACPI SLIT ==> [0000007000 - 000000706c] #14 [000000c000 - 000004c640] MEMNODEMAP ==> [000000c000 - 000004c640] Bootmem setup node 1 0000000430000000-0000000830000000 NODE_DATA [0000000430000000 - 0000000430018fff] bootmap [0000000430019000 - 0000000430098fff] pages 80 (15 early reservations) ==> bootmem [0430000000 - 0830000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 2 0000000830000000-0000000c30000000 NODE_DATA [0000000830000000 - 0000000830018fff] bootmap [0000000830019000 - 0000000830098fff] pages 80 (15 early reservations) ==> bootmem [0830000000 - 0c30000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 3 0000000c30000000-0000001030000000 NODE_DATA [0000000c30000000 - 0000000c30018fff] bootmap [0000000c30019000 - 0000000c30098fff] pages 80 (15 early reservations) ==> bootmem [0c30000000 - 1030000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 4 0000001030000000-0000001430000000 NODE_DATA [0000001030000000 - 0000001030018fff] bootmap [0000001030019000 - 0000001030098fff] pages 80 (15 early reservations) ==> bootmem [1030000000 - 1430000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 5 0000001430000000-0000001830000000 NODE_DATA [0000001430000000 - 0000001430018fff] bootmap [0000001430019000 - 0000001430098fff] pages 80 (15 early reservations) ==> bootmem [1430000000 - 1830000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 6 0000001830000000-0000001c30000000 NODE_DATA [0000001830000000 - 0000001830018fff] bootmap [0000001830019000 - 0000001830098fff] pages 80 (15 early reservations) ==> bootmem [1830000000 - 1c30000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP Bootmem setup node 7 0000001c30000000-000000202ffff000 NODE_DATA [0000001c30000000 - 0000001c30018fff] bootmap [0000001c30019000 - 0000001c30098fff] pages 80 (15 early reservations) ==> bootmem [1c30000000 - 202ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0001000000 - 00029b82b8] TEXT DATA BSS #2 [0032055000 - 0037fef008] RAMDISK #3 [00029b9000 - 00029b9114] BRK #4 [00000f4f90 - 0000100000] BIOS reserved #5 [00000f4f80 - 00000f4f90] MP-table mpf #6 [000009f400 - 00000e4000] BIOS reserved #7 [00000e476c - 00000f4f80] BIOS reserved #8 [00000e4000 - 00000e476c] MP-table mpc #9 [0000001000 - 0000003000] TRAMPOLINE #10 [0000003000 - 0000007000] ACPI WAKEUP #11 [0000008000 - 000000a000] PGTABLE #12 [000000a000 - 000000c000] PGTABLE #13 [0000007000 - 000000706c] ACPI SLIT #14 [000000c000 - 000004c640] MEMNODEMAP [ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880002a00000-ffff880010bfffff] on node 0 [ffffea001ca80000-ffffea001cbfffff] potential offnode page_structs [ffffea000ec00000-ffffea001cbfffff] PMD -> [ffff880430200000-ffff88043e1fffff] on node 1 [ffffea002aa80000-ffffea002abfffff] potential offnode page_structs [ffffea001cc00000-ffffea002abfffff] PMD -> [ffff880830200000-ffff88083e1fffff] on node 2 [ffffea0038a80000-ffffea0038bfffff] potential offnode page_structs [ffffea002ac00000-ffffea0038bfffff] PMD -> [ffff880c30200000-ffff880c3e1fffff] on node 3 [ffffea0038c00000-ffffea003fffffff] PMD -> [ffff881030200000-ffff8810375fffff] on node 4 [ffffea0046a80000-ffffea0046bfffff] potential offnode page_structs [ffffea0040000000-ffffea0046bfffff] PMD -> [ffff881037800000-ffff88103e3fffff] on node 4 [ffffea0054a80000-ffffea0054bfffff] potential offnode page_structs [ffffea0046c00000-ffffea0054bfffff] PMD -> [ffff881430200000-ffff88143e1fffff] on node 5 [ffffea0062a80000-ffffea0062bfffff] potential offnode page_structs [ffffea0054c00000-ffffea0062bfffff] PMD -> [ffff881830200000-ffff88183e1fffff] on node 6 [ffffea0062c00000-ffffea0070bfffff] PMD -> [ffff881c30200000-ffff881c3e1fffff] on node 7 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0202ffff Movable zone start PFN for each node early_node_map[11] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000cfd4c 0: 0x000cfd56 -> 0x000cfd57 0: 0x00100000 -> 0x00430000 1: 0x00430000 -> 0x00830000 2: 0x00830000 -> 0x00c30000 3: 0x00c30000 -> 0x01030000 4: 0x01030000 -> 0x01430000 5: 0x01430000 -> 0x01830000 6: 0x01830000 -> 0x01c30000 7: 0x01c30000 -> 0x0202ffff On node 0 totalpages: 4193516 DMA zone: 56 pages used for memmap DMA zone: 170 pages reserved DMA zone: 3773 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 832901 pages, LIFO batch:31 Normal zone: 45696 pages used for memmap Normal zone: 3296640 pages, LIFO batch:31 On node 1 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 2 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 3 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 4 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 5 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 6 totalpages: 4194304 Normal zone: 57344 pages used for memmap Normal zone: 4136960 pages, LIFO batch:31 On node 7 totalpages: 4194303 Normal zone: 57344 pages used for memmap Normal zone: 4136959 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x920 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x18] enabled) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x20] enabled) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x28] enabled) ACPI: LAPIC (acpi_id[0x24] lapic_id[0x30] enabled) ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x38] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x19] enabled) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x21] enabled) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x29] enabled) ACPI: LAPIC (acpi_id[0x25] lapic_id[0x31] enabled) ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x39] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x1a] enabled) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x22] enabled) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x2a] enabled) ACPI: LAPIC (acpi_id[0x26] lapic_id[0x32] enabled) ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x3a] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x1b] enabled) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x23] enabled) ACPI: LAPIC (acpi_id[0x21] lapic_id[0x2b] enabled) ACPI: LAPIC (acpi_id[0x27] lapic_id[0x33] enabled) ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x3b] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x1c] enabled) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x24] enabled) ACPI: LAPIC (acpi_id[0x22] lapic_id[0x2c] enabled) ACPI: LAPIC (acpi_id[0x28] lapic_id[0x34] enabled) ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x3c] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1d] enabled) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x25] enabled) ACPI: LAPIC (acpi_id[0x23] lapic_id[0x2d] enabled) ACPI: LAPIC (acpi_id[0x29] lapic_id[0x35] enabled) ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x3d] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 SMP: Allowing 48 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfd4c000 - 00000000cfd56000 PM: Registered nosave memory: 00000000cfd57000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:48 nr_node_ids:8 PERCPU: Embedded 478 pages/cpu @ffff880010e00000 s1927384 r8192 d22312 u2097152 pcpu-alloc: s1927384 r8192 d22312 u2097152 alloc=1*2097152 pcpu-alloc: [0] 00 [0] 08 [0] 16 [0] 24 [0] 32 [0] 40 [1] 01 [1] 09 pcpu-alloc: [1] 17 [1] 25 [1] 33 [1] 41 [2] 02 [2] 10 [2] 18 [2] 26 pcpu-alloc: [2] 34 [2] 42 [3] 03 [3] 11 [3] 19 [3] 27 [3] 35 [3] 43 pcpu-alloc: [4] 04 [4] 12 [4] 20 [4] 28 [4] 36 [4] 44 [5] 05 [5] 13 pcpu-alloc: [5] 21 [5] 29 [5] 37 [5] 45 [6] 06 [6] 14 [6] 22 [6] 30 pcpu-alloc: [6] 38 [6] 46 [7] 07 [7] 15 [7] 23 [7] 31 [7] 39 [7] 47 Built 8 zonelists in Zone order, mobility grouping on. Total pages: 33092033 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_hpdl785g501-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us console=ttyS1,115200 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 132025532k/135004156k available (4556k kernel code, 789584k absent, 2189040k reserved, 7381k data, 2752k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=48, Nodes=8 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1200 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [ttyS1] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 1342177280 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 56 of 56 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 2792.966 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.91 BogoMIPS (lpj=2792955) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls tseg: 00cff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 22528 entries in 89 pages Setting APIC routing to physical flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Six-Core AMD Opteron(tm) Processor 8439 SE stepping 00 lockdep: fixing up alternatives. Booting Node 1, Processors #1lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #2lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #3lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #4lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #5lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #6lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #7lockdep: fixing up alternatives. Ok. Booting Node 0, Processors #8lockdep: fixing up alternatives. Ok. Booting Node 1, Processors #9lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #10lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #11lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #12lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #13lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #14lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #15lockdep: fixing up alternatives. Ok. Booting Node 0, Processors #16lockdep: fixing up alternatives. Ok. Booting Node 1, Processors #17lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #18lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #19lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #20lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #21lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #22lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #23lockdep: fixing up alternatives. Ok. Booting Node 0, Processors #24lockdep: fixing up alternatives. Ok. Booting Node 1, Processors #25lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #26lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #27lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #28lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #29lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #30lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #31lockdep: fixing up alternatives. Ok. Booting Node 0, Processors #32lockdep: fixing up alternatives. Ok. Booting Node 1, Processors #33lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #34lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #35lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #36lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #37lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #38lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #39lockdep: fixing up alternatives. Ok. Booting Node 0, Processors #40lockdep: fixing up alternatives. Ok. Booting Node 1, Processors #41lockdep: fixing up alternatives. Ok. Booting Node 2, Processors #42lockdep: fixing up alternatives. Ok. Booting Node 3, Processors #43lockdep: fixing up alternatives. Ok. Booting Node 4, Processors #44lockdep: fixing up alternatives. Ok. Booting Node 5, Processors #45lockdep: fixing up alternatives. Ok. Booting Node 6, Processors #46lockdep: fixing up alternatives. Ok. Booting Node 7, Processors #47 Ok. Brought up 48 CPUs Total of 48 processors activated (268145.16 BogoMIPS). tmpfs: No value for mount option 'mode' devtmpfs: initialized regulator: core version 0.5 Time: 8:12:39 Date: 12/22/09 NET: Registered protocol family 16 node 0 link 2: io port [1000, 4fff] node 2 link 2: io port [5000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [d0000000, dfffffff] node 0 link 2: mmio [e8000000, fdefffff] node 2 link 2: mmio [fdf00000, fdffffff] node 0 link 2: mmio [d0000000, d3f0ffff] ==> none node 2 link 2: mmio [d4000000, d7f0ffff] ==> none node 6 link 2: mmio [d8000000, dbf0ffff] ==> none node 7 link 2: mmio [dc000000, dff0ffff] ==> none TOM2: 0000002030000000 aka 131840M bus: [00, 3f] on node 0 link 2 bus: 00 index 0 io port: [0, 4fff] bus: 00 index 1 mmio: [e0000000, fdefffff] bus: 00 index 2 mmio: [fe000000, ffffffff] bus: 00 index 3 mmio: [2030000000, fcffffffff] bus: [40, 7f] on node 2 link 2 bus: 40 index 0 io port: [5000, ffff] bus: 40 index 1 mmio: [fdf00000, fdffffff] bus: [80, bf] on node 6 link 2 bus: [c0, f0] on node 7 link 2 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000) PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20091214/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88101e41df70), AE_AML_BUFFER_LIMIT ACPI: SSDT 00000000cfd58000 078B4 (v02 HP PNOWSSDT 00000002 HP 00000001) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xfdefffff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x1000-0x4fff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci 0000:00:03.0: reg 10: [mem 0xe8000000-0xefffffff pref] pci 0000:00:03.0: reg 14: [io 0x1000-0x10ff] pci 0000:00:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff] pci 0000:00:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:03.0: supports D1 D2 pci 0000:00:04.0: reg 10: [io 0x2800-0x28ff] pci 0000:00:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.2: reg 10: [io 0x1400-0x14ff] pci 0000:00:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff] pci 0000:00:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff] pci 0000:00:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff] pci 0000:00:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold pci 0000:00:04.2: PME# disabled pci 0000:00:04.4: reg 20: [io 0x1800-0x181f] pci 0000:00:04.4: PME# supported from D0 D3hot D3cold pci 0000:00:04.4: PME# disabled pci 0000:00:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff] pci 0000:00:04.6: PME# supported from D0 D3hot D3cold pci 0000:00:04.6: PME# disabled pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:06.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:06.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:06.1: reg 18: [io 0x0170-0x0177] pci 0000:00:06.1: reg 1c: [io 0x0374-0x0377] pci 0000:00:06.1: reg 20: [io 0x0500-0x050f] pci 0000:00:07.0: reg 10: [mem 0xf7ee0000-0xf7ee0fff] pci 0000:00:07.0: reg 14: [io 0x1c00-0x1cff] pci 0000:00:07.1: reg 10: [mem 0xf7ed0000-0xf7ed0fff] pci 0000:00:07.1: reg 14: [io 0x3000-0x30ff] pci 0000:00:07.2: reg 10: [mem 0xf7ec0000-0xf7ec0fff] pci 0000:00:07.2: reg 14: [io 0x3400-0x34ff] pci 0000:00:07.2: supports D1 D2 pci 0000:00:07.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:07.2: PME# disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:14.0: PME# supported from D0 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:15.0: PME# supported from D0 D3hot D3cold pci 0000:00:15.0: PME# disabled pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:17.0: PME# supported from D0 D3hot D3cold pci 0000:00:17.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:00:05.0: PCI bridge to [bus 01-02] pci 0000:00:05.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:02:03.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:02:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:03.0: PME# supported from D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:04.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:04.0: PME# supported from D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:01:0d.0: PCI bridge to [bus 02-02] pci 0000:01:0d.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:00:13.0: PCI bridge to [bus 04-06] pci 0000:03:00.0: reg 10: [mem 0xfde00000-0xfdefffff 64bit] pci 0000:03:00.0: reg 18: [io 0x4000-0x40ff] pci 0000:03:00.0: reg 1c: [mem 0xfddf0000-0xfddf0fff 64bit] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:14.0: PCI bridge to [bus 03-03] pci 0000:00:14.0: bridge window [io 0x4000-0x4fff] pci 0000:00:14.0: bridge window [mem 0xfdd00000-0xfdefffff] pci 0000:00:15.0: PCI bridge to [bus 07-09] pci 0000:00:16.0: PCI bridge to [bus 0a-0c] pci 0000:00:17.0: PCI bridge to [bus 0d-0f] pci_bus 0000:00: on NUMA node 0 (pxm 0) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB.PPXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci_root PNP0A03:01: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:01: host bridge window [mem 0xfdf00000-0xfdffffff] (ignored) pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff] (ignored) pci 0000:40:13.0: PME# supported from D0 D3hot D3cold pci 0000:40:13.0: PME# disabled pci 0000:40:14.0: PME# supported from D0 D3hot D3cold pci 0000:40:14.0: PME# disabled pci 0000:40:15.0: PME# supported from D0 D3hot D3cold pci 0000:40:15.0: PME# disabled pci 0000:40:16.0: PME# supported from D0 D3hot D3cold pci 0000:40:16.0: PME# disabled pci 0000:40:17.0: PME# supported from D0 D3hot D3cold pci 0000:40:17.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:40:13.0: PCI bridge to [bus 41-43] pci 0000:40:14.0: PCI bridge to [bus 4a-4a] pci 0000:40:15.0: PCI bridge to [bus 4b-4b] pci 0000:44:00.0: reg 10: [io 0x5000-0x50ff] pci 0000:44:00.0: reg 14: [mem 0xfdff0000-0xfdff3fff 64bit] pci 0000:44:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:44:00.1: reg 10: [io 0x5400-0x54ff] pci 0000:44:00.1: reg 14: [mem 0xfdfe0000-0xfdfe3fff 64bit] pci 0000:44:00.1: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:44:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:40:16.0: PCI bridge to [bus 44-46] pci 0000:40:16.0: bridge window [io 0x5000-0x5fff] pci 0000:40:16.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:17.0: PCI bridge to [bus 47-49] pci_bus 0000:40: on NUMA node 2 (pxm 2) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB4._PRT] ACPI: PCI Root Bridge [PCI2] (0000:80) pci_root PNP0A03:02: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci 0000:80:13.0: PME# supported from D0 D3hot D3cold pci 0000:80:13.0: PME# disabled pci 0000:80:14.0: PME# supported from D0 D3hot D3cold pci 0000:80:14.0: PME# disabled pci 0000:80:15.0: PME# supported from D0 D3hot D3cold pci 0000:80:15.0: PME# disabled pci 0000:80:16.0: PME# supported from D0 D3hot D3cold pci 0000:80:16.0: PME# disabled pci 0000:80:17.0: PME# supported from D0 D3hot D3cold pci 0000:80:17.0: PME# disabled PCI: peer root bus 80 res updated from pci conf pci 0000:80:13.0: PCI bridge to [bus 81-83] pci 0000:80:14.0: PCI bridge to [bus 87-87] pci 0000:80:15.0: PCI bridge to [bus 88-88] pci 0000:80:16.0: PCI bridge to [bus 84-86] pci 0000:80:17.0: PCI bridge to [bus 89-89] pci_bus 0000:80: on NUMA node 6 (pxm 6) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.EXB3._PRT] ACPI: PCI Root Bridge [PCI3] (0000:c0) pci_root PNP0A03:03: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci 0000:c0:13.0: PME# supported from D0 D3hot D3cold pci 0000:c0:13.0: PME# disabled pci 0000:c0:14.0: PME# supported from D0 D3hot D3cold pci 0000:c0:14.0: PME# disabled pci 0000:c0:15.0: PME# supported from D0 D3hot D3cold pci 0000:c0:15.0: PME# disabled pci 0000:c0:16.0: PME# supported from D0 D3hot D3cold pci 0000:c0:16.0: PME# disabled pci 0000:c0:17.0: PME# supported from D0 D3hot D3cold pci 0000:c0:17.0: PME# disabled PCI: peer root bus c0 res updated from pci conf pci 0000:c0:13.0: PCI bridge to [bus c1-c3] pci 0000:c0:14.0: PCI bridge to [bus c7-c7] pci 0000:c0:15.0: PCI bridge to [bus c8-c8] pci 0000:c0:16.0: PCI bridge to [bus c4-c6] pci 0000:c0:17.0: PCI bridge to [bus c9-c9] pci_bus 0000:c0: on NUMA node 7 (pxm 7) ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.EXB3._PRT] ACPI: PCI Interrupt Link [IUSB] (IRQs *5) ACPI: PCI Interrupt Link [ISF0] (IRQs 14) *0, disabled. ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN06] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN22] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN23] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN28] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN30] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled. vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc kstop/0 used greatest stack depth: 6408 bytes left pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0379-0x037a] has been reserved system 00:01: [io 0x0408-0x040f] has been reserved system 00:01: [io 0x040b] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x04d6] has been reserved system 00:01: [io 0x0520] has been reserved system 00:01: [io 0x0580-0x059f] has been reserved system 00:01: [io 0x0600-0x067f] has been reserved system 00:01: [io 0x0700-0x0703] has been reserved system 00:01: [io 0x0820-0x082f] has been reserved system 00:01: [io 0x0900-0x09fe] has been reserved system 00:01: [io 0x0c06-0x0c07] has been reserved system 00:01: [io 0x0c14] has been reserved system 00:01: [io 0x0c4a] has been reserved system 00:01: [io 0x0c50-0x0c52] has been reserved system 00:01: [io 0x0c6c] has been reserved system 00:01: [io 0x0c6f] has been reserved system 00:01: [io 0x0c80-0x0c83] has been reserved system 00:01: [io 0x0c90-0x0c9f] has been reserved system 00:01: [io 0x0ca0-0x0ca5] has been reserved system 00:01: [io 0x0cd4-0x0cd7] has been reserved system 00:01: [io 0x0f50-0x0f58] has been reserved system 00:01: [io 0x02f8-0x02ff] has been reserved system 00:01: [mem 0xd0000000-0xdfffffff] has been reserved pci 0000:00:05.0: BAR 15: assigned [mem 0xe0000000-0xe00fffff pref] pci 0000:00:14.0: BAR 15: assigned [mem 0xe0100000-0xe01fffff pref] pci 0000:00:03.0: BAR 6: assigned [mem 0xe0200000-0xe021ffff pref] pci 0000:00:04.2: BAR 6: assigned [mem 0xe0220000-0xe022ffff pref] pci 0000:01:0d.0: BAR 15: assigned [mem 0xe0000000-0xe00fffff pref] pci 0000:02:03.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref] pci 0000:02:04.0: BAR 6: assigned [mem 0xe0020000-0xe003ffff pref] pci 0000:01:0d.0: PCI bridge to [bus 02-02] pci 0000:01:0d.0: bridge window [io disabled] pci 0000:01:0d.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:01:0d.0: bridge window [mem 0xe0000000-0xe00fffff pref] pci 0000:00:05.0: PCI bridge to [bus 01-02] pci 0000:00:05.0: bridge window [io disabled] pci 0000:00:05.0: bridge window [mem 0xf8000000-0xfbffffff] pci 0000:00:05.0: bridge window [mem 0xe0000000-0xe00fffff pref] pci 0000:00:13.0: PCI bridge to [bus 04-06] pci 0000:00:13.0: bridge window [io disabled] pci 0000:00:13.0: bridge window [mem disabled] pci 0000:00:13.0: bridge window [mem pref disabled] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0100000-0xe013ffff pref] pci 0000:00:14.0: PCI bridge to [bus 03-03] pci 0000:00:14.0: bridge window [io 0x4000-0x4fff] pci 0000:00:14.0: bridge window [mem 0xfdd00000-0xfdefffff] pci 0000:00:14.0: bridge window [mem 0xe0100000-0xe01fffff pref] pci 0000:00:15.0: PCI bridge to [bus 07-09] pci 0000:00:15.0: bridge window [io disabled] pci 0000:00:15.0: bridge window [mem disabled] pci 0000:00:15.0: bridge window [mem pref disabled] pci 0000:00:16.0: PCI bridge to [bus 0a-0c] pci 0000:00:16.0: bridge window [io disabled] pci 0000:00:16.0: bridge window [mem disabled] pci 0000:00:16.0: bridge window [mem pref disabled] pci 0000:00:17.0: PCI bridge to [bus 0d-0f] pci 0000:00:17.0: bridge window [io disabled] pci 0000:00:17.0: bridge window [mem disabled] pci 0000:00:17.0: bridge window [mem pref disabled] alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 pci 0000:00:13.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:13.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pci 0000:00:14.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 pci 0000:00:14.0: setting latency timer to 64 alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 pci 0000:00:15.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci 0000:00:15.0: setting latency timer to 64 alloc irq_desc for 31 on node 0 alloc kstat_irqs on node 0 pci 0000:00:16.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:16.0: setting latency timer to 64 alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 pci 0000:00:17.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:17.0: setting latency timer to 64 pci 0000:40:16.0: BAR 15: can't assign mem pref (size 0x100000) pci 0000:40:13.0: PCI bridge to [bus 41-43] pci 0000:40:13.0: bridge window [io disabled] pci 0000:40:13.0: bridge window [mem disabled] pci 0000:40:13.0: bridge window [mem pref disabled] pci 0000:40:14.0: PCI bridge to [bus 4a-4a] pci 0000:40:14.0: bridge window [io disabled] pci 0000:40:14.0: bridge window [mem disabled] pci 0000:40:14.0: bridge window [mem pref disabled] pci 0000:40:15.0: PCI bridge to [bus 4b-4b] pci 0000:40:15.0: bridge window [io disabled] pci 0000:40:15.0: bridge window [mem disabled] pci 0000:40:15.0: bridge window [mem pref disabled] pci 0000:44:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf3ffff pref] pci 0000:44:00.1: BAR 6: assigned [mem 0xfdf40000-0xfdf7ffff pref] pci 0000:40:16.0: PCI bridge to [bus 44-46] pci 0000:40:16.0: bridge window [io 0x5000-0x5fff] pci 0000:40:16.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:40:16.0: bridge window [mem pref disabled] pci 0000:40:17.0: PCI bridge to [bus 47-49] pci 0000:40:17.0: bridge window [io disabled] pci 0000:40:17.0: bridge window [mem disabled] pci 0000:40:17.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node 2 alloc kstat_irqs on node 2 pci 0000:40:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:40:13.0: setting latency timer to 64 alloc irq_desc for 34 on node 2 alloc kstat_irqs on node 2 pci 0000:40:14.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 pci 0000:40:14.0: setting latency timer to 64 alloc irq_desc for 26 on node 2 alloc kstat_irqs on node 2 pci 0000:40:15.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:40:15.0: setting latency timer to 64 alloc irq_desc for 19 on node 2 alloc kstat_irqs on node 2 pci 0000:40:16.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:40:16.0: setting latency timer to 64 alloc irq_desc for 20 on node 2 alloc kstat_irqs on node 2 pci 0000:40:17.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:40:17.0: setting latency timer to 64 pci 0000:80:13.0: PCI bridge to [bus 81-83] pci 0000:80:13.0: bridge window [io disabled] pci 0000:80:13.0: bridge window [mem disabled] pci 0000:80:13.0: bridge window [mem pref disabled] pci 0000:80:14.0: PCI bridge to [bus 87-87] pci 0000:80:14.0: bridge window [io disabled] pci 0000:80:14.0: bridge window [mem disabled] pci 0000:80:14.0: bridge window [mem pref disabled] pci 0000:80:15.0: PCI bridge to [bus 88-88] pci 0000:80:15.0: bridge window [io disabled] pci 0000:80:15.0: bridge window [mem disabled] pci 0000:80:15.0: bridge window [mem pref disabled] pci 0000:80:16.0: PCI bridge to [bus 84-86] pci 0000:80:16.0: bridge window [io disabled] pci 0000:80:16.0: bridge window [mem disabled] pci 0000:80:16.0: bridge window [mem pref disabled] pci 0000:80:17.0: PCI bridge to [bus 89-89] pci 0000:80:17.0: bridge window [io disabled] pci 0000:80:17.0: bridge window [mem disabled] pci 0000:80:17.0: bridge window [mem pref disabled] alloc irq_desc for 17 on node 6 alloc kstat_irqs on node 6 pci 0000:80:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:80:13.0: setting latency timer to 64 alloc irq_desc for 35 on node 6 alloc kstat_irqs on node 6 pci 0000:80:14.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 pci 0000:80:14.0: setting latency timer to 64 alloc irq_desc for 29 on node 6 alloc kstat_irqs on node 6 pci 0000:80:15.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 pci 0000:80:15.0: setting latency timer to 64 alloc irq_desc for 21 on node 6 alloc kstat_irqs on node 6 pci 0000:80:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 pci 0000:80:16.0: setting latency timer to 64 alloc irq_desc for 27 on node 6 alloc kstat_irqs on node 6 pci 0000:80:17.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:80:17.0: setting latency timer to 64 pci 0000:c0:13.0: PCI bridge to [bus c1-c3] pci 0000:c0:13.0: bridge window [io disabled] pci 0000:c0:13.0: bridge window [mem disabled] pci 0000:c0:13.0: bridge window [mem pref disabled] pci 0000:c0:14.0: PCI bridge to [bus c7-c7] pci 0000:c0:14.0: bridge window [io disabled] pci 0000:c0:14.0: bridge window [mem disabled] pci 0000:c0:14.0: bridge window [mem pref disabled] pci 0000:c0:15.0: PCI bridge to [bus c8-c8] pci 0000:c0:15.0: bridge window [io disabled] pci 0000:c0:15.0: bridge window [mem disabled] pci 0000:c0:15.0: bridge window [mem pref disabled] pci 0000:c0:16.0: PCI bridge to [bus c4-c6] pci 0000:c0:16.0: bridge window [io disabled] pci 0000:c0:16.0: bridge window [mem disabled] pci 0000:c0:16.0: bridge window [mem pref disabled] pci 0000:c0:17.0: PCI bridge to [bus c9-c9] pci 0000:c0:17.0: bridge window [io disabled] pci 0000:c0:17.0: bridge window [mem disabled] pci 0000:c0:17.0: bridge window [mem pref disabled] alloc irq_desc for 18 on node 7 alloc kstat_irqs on node 7 pci 0000:c0:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:c0:13.0: setting latency timer to 64 alloc irq_desc for 36 on node 7 alloc kstat_irqs on node 7 pci 0000:c0:14.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:c0:14.0: setting latency timer to 64 alloc irq_desc for 33 on node 7 alloc kstat_irqs on node 7 pci 0000:c0:15.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:c0:15.0: setting latency timer to 64 alloc irq_desc for 23 on node 7 alloc kstat_irqs on node 7 pci 0000:c0:16.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 pci 0000:c0:16.0: setting latency timer to 64 alloc irq_desc for 28 on node 7 alloc kstat_irqs on node 7 pci 0000:c0:17.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:c0:17.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0x4fff] pci_bus 0000:00: resource 1 [mem 0xe0000000-0xfdefffff] pci_bus 0000:00: resource 2 [mem 0xfe000000-0xffffffff] pci_bus 0000:00: resource 3 [mem 0x2030000000-0xfcffffffff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff pref] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff pref] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfdefffff] pci_bus 0000:03: resource 2 [mem 0xe0100000-0xe01fffff pref] pci_bus 0000:40: resource 0 [io 0x5000-0xffff] pci_bus 0000:40: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:44: resource 0 [io 0x5000-0x5fff] pci_bus 0000:44: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:80: resource 0 [io 0x0000-0xffff] pci_bus 0000:80: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:c0: resource 0 [io 0x0000-0xffff] pci_bus 0000:c0: resource 1 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 65536 (order: 11, 10485760 bytes) UDP-Lite hash table entries: 65536 (order: 11, 10485760 bytes) NET: Registered protocol family 1 pci 0000:00:03.0: Boot video device pci 0000:00:04.4: HCRESET not completed yet! pci 0000:00:06.0: disabled boot interrupts on device [1166:0205] PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 97896k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1261469552.213:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32768 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5848 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:13.0: setting latency timer to 64 alloc irq_desc for 48 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:13.0: irq 48 for MSI/MSI-X work_for_cpu used greatest stack depth: 5624 bytes left cryptomgr_test used greatest stack depth: 5576 bytes left pcieport 0000:00:14.0: setting latency timer to 64 alloc irq_desc for 49 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:14.0: irq 49 for MSI/MSI-X pcieport 0000:00:15.0: setting latency timer to 64 alloc irq_desc for 50 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:15.0: irq 50 for MSI/MSI-X pcieport 0000:00:16.0: setting latency timer to 64 alloc irq_desc for 51 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:16.0: irq 51 for MSI/MSI-X pcieport 0000:00:17.0: setting latency timer to 64 alloc irq_desc for 52 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:17.0: irq 52 for MSI/MSI-X work_for_cpu used greatest stack depth: 5544 bytes left cryptomgr_test used greatest stack depth: 5512 bytes left pcieport 0000:40:13.0: setting latency timer to 64 alloc irq_desc for 53 on node 2 alloc kstat_irqs on node 2 pcieport 0000:40:13.0: irq 53 for MSI/MSI-X work_for_cpu used greatest stack depth: 5368 bytes left pcieport 0000:40:14.0: setting latency timer to 64 alloc irq_desc for 54 on node 2 alloc kstat_irqs on node 2 pcieport 0000:40:14.0: irq 54 for MSI/MSI-X pcieport 0000:40:15.0: setting latency timer to 64 alloc irq_desc for 55 on node 2 alloc kstat_irqs on node 2 pcieport 0000:40:15.0: irq 55 for MSI/MSI-X pcieport 0000:40:16.0: setting latency timer to 64 alloc irq_desc for 56 on node 2 alloc kstat_irqs on node 2 pcieport 0000:40:16.0: irq 56 for MSI/MSI-X pcieport 0000:40:17.0: setting latency timer to 64 alloc irq_desc for 57 on node 2 alloc kstat_irqs on node 2 pcieport 0000:40:17.0: irq 57 for MSI/MSI-X pcieport 0000:80:13.0: setting latency timer to 64 alloc irq_desc for 58 on node 6 alloc kstat_irqs on node 6 pcieport 0000:80:13.0: irq 58 for MSI/MSI-X pcieport 0000:80:14.0: setting latency timer to 64 alloc irq_desc for 59 on node 6 alloc kstat_irqs on node 6 pcieport 0000:80:14.0: irq 59 for MSI/MSI-X pcieport 0000:80:15.0: setting latency timer to 64 alloc irq_desc for 60 on node 6 alloc kstat_irqs on node 6 pcieport 0000:80:15.0: irq 60 for MSI/MSI-X pcieport 0000:80:16.0: setting latency timer to 64 alloc irq_desc for 61 on node 6 alloc kstat_irqs on node 6 pcieport 0000:80:16.0: irq 61 for MSI/MSI-X pcieport 0000:80:17.0: setting latency timer to 64 alloc irq_desc for 62 on node 6 alloc kstat_irqs on node 6 pcieport 0000:80:17.0: irq 62 for MSI/MSI-X pcieport 0000:c0:13.0: setting latency timer to 64 alloc irq_desc for 63 on node 7 alloc kstat_irqs on node 7 pcieport 0000:c0:13.0: irq 63 for MSI/MSI-X pcieport 0000:c0:14.0: setting latency timer to 64 alloc irq_desc for 64 on node 7 alloc kstat_irqs on node 7 pcieport 0000:c0:14.0: irq 64 for MSI/MSI-X pcieport 0000:c0:15.0: setting latency timer to 64 alloc irq_desc for 65 on node 7 alloc kstat_irqs on node 7 pcieport 0000:c0:15.0: irq 65 for MSI/MSI-X pcieport 0000:c0:16.0: setting latency timer to 64 alloc irq_desc for 66 on node 7 alloc kstat_irqs on node 7 pcieport 0000:c0:16.0: irq 66 for MSI/MSI-X pcieport 0000:c0:17.0: setting latency timer to 64 alloc irq_desc for 67 on node 7 alloc kstat_irqs on node 7 pcieport 0000:c0:17.0: irq 67 for MSI/MSI-X aer 0000:00:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:14.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:15.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:16.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:17.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:14.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:15.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:16.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:17.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:80:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:80:14.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:80:15.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:80:16.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:80:17.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:c0:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:c0:14.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:c0:15.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:c0:16.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:c0:17.0:pcie02: AER service couldn't init device: no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5 ehci_hcd 0000:00:07.2: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:07.2: EHCI Host Controller ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:07.2: irq 5, io mem 0xf7ec0000 ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:07.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected work_for_cpu used greatest stack depth: 4448 bytes left ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:07.0: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.0: OHCI Host Controller ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:07.0: irq 5, io mem 0xf7ee0000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33-rc1 ohci_hcd usb usb2: SerialNumber: 0000:00:07.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:07.1: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.1: OHCI Host Controller ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:07.1: irq 5, io mem 0xf7ed0000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33-rc1 ohci_hcd usb usb3: SerialNumber: 0000:00:07.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver alloc irq_desc for 41 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:04.4: PCI INT B -> GSI 41 (level, low) -> IRQ 41 uhci_hcd 0000:00:04.4: UHCI Host Controller uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:00:04.4: HCRESET not completed yet! uhci_hcd 0000:00:04.4: irq 41, io base 0x00001800 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33-rc1 uhci_hcd usb usb4: SerialNumber: 0000:00:04.4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 5:704:220 acpi device:3e: hash matches dmi id: hash matches rtc_cmos rtc_cmos: setting system clock to 2009-12-22 08:12:44 UTC (1261469564) Initalizing network drop monitor service Freeing unused kernel memory: 2752k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1568k freed Freeing unused kernel memory: 1832k freed dracut: dracut-003-1.fc13 udev: starting version 147 usb 3-1: new full speed USB device using ohci_hcd and address 2 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. alloc irq_desc for 39 on node 0 alloc kstat_irqs on node 0 radeon 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xF7FF0000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] radeon: VRAM 64M [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=64M, BAR=128M [drm] RAM width 16bits DDR usb 3-1: not running at top speed; connect to a high speed hub [TTM] Zone kernel: Available graphics memory: 66097768 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [drm] radeon: 64M of VRAM memory ready usb 3-1: New USB device found, idVendor=04b4, idProduct=6560 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [drm] radeon: 512M of GTT memory ready. hub 3-1:1.0: USB hub found [drm] GART: num cpu pages 131072, num gpu pages 131072 hub 3-1:1.0: 4 ports detected [drm] radeon: cp idle (0x00008080) [drm] Loading R100 Microcode platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 2 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] No TV DAC info found in BIOS [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] VGA [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 usb 4-1: new full speed USB device using uhci_hcd and address 2 [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 786432 [drm] fb depth is 8 [drm] pitch is 1024 usb 4-1: New USB device found, idVendor=03f0, idProduct=1027 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Virtual Keyboard usb 4-1: Manufacturer: HP input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1/input0 [drm] DAC-8: set mode 1024x768 12 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb4/4-1/4-1:1.1/input/input3 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1/input1 Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:00:03.0 on minor 0 work_for_cpu used greatest stack depth: 4016 bytes left dracut: Starting plymouth daemon usb 4-2: new full speed USB device using uhci_hcd and address 3 hub 4-0:1.0: unable to enumerate USB device on port 2 scsi0 : pata_serverworks HP CISS Driver (v 3.6.20) cciss 0000:03:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 alloc irq_desc for 68 on node 0 alloc kstat_irqs on node 0 cciss 0000:03:00.0: irq 68 for MSI/MSI-X alloc irq_desc for 69 on node 0 alloc kstat_irqs on node 0 cciss 0000:03:00.0: irq 69 for MSI/MSI-X alloc irq_desc for 70 on node 0 alloc kstat_irqs on node 0 cciss 0000:03:00.0: irq 70 for MSI/MSI-X alloc irq_desc for 71 on node 0 alloc kstat_irqs on node 0 cciss 0000:03:00.0: irq 71 for MSI/MSI-X scsi1 : pata_serverworks ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 IRQ 70/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x3230> at PCI 0000:03:00.0 IRQ 70 using DAC cciss/c0d0: p1 p2 work_for_cpu used greatest stack depth: 3704 bytes left usb 4-2: new full speed USB device using uhci_hcd and address 4 ata1.00: ATAPI: TSSTcorpDVD-ROM TS-L332A, HG00, max UDMA/33 ata1.00: configured for UDMA/33 usb 4-2: New USB device found, idVendor=03f0, idProduct=1327 scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-L332A HG00 PQ: 0 ANSI: 5 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Virtual Hub usb 4-2: Manufacturer: HP hub 4-2:1.0: USB hub found hub 4-2:1.0: 7 ports detected sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 QLogic Fibre Channel HBA Driver: 8.03.01-k8 qla2xxx 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 qla2xxx 0000:44:00.0: Found an ISP2432, irq 19, iobase 0xffffc9001e7d8000 alloc irq_desc for 72 on node 2 alloc kstat_irqs on node 2 qla2xxx 0000:44:00.0: irq 72 for MSI/MSI-X qla2xxx 0000:44:00.0: Configuring PCI space... qla2xxx 0000:44:00.0: setting latency timer to 64 qla2xxx 0000:44:00.0: Configure NVRAM parameters... qla2xxx 0000:44:00.0: Verifying loaded RISC code... qla2xxx 0000:44:00.0: firmware: requesting ql2400_fw.bin qla2xxx 0000:44:00.0: Firmware image unavailable. qla2xxx 0000:44:00.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:44:00.0: FW: Loading from flash (20000)... cdrom_id used greatest stack depth: 3696 bytes left qla2xxx 0000:44:00.0: Unable to initialize EFT (258). qla2xxx 0000:44:00.0: Allocated (1221 KB) for firmware dump... scsi2 : qla2xxx qla2xxx 0000:44:00.0: QLogic Fibre Channel HBA Driver: 8.03.01-k8 QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA ISP2432: PCIe (2.5GT/s x4) @ 0000:44:00.0 hdma+, host#=2, fw=4.00.09 (2) qla2xxx 0000:44:00.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26 qla2xxx 0000:44:00.1: Found an ISP2432, irq 26, iobase 0xffffc9001e7ce000 alloc irq_desc for 73 on node 2 alloc kstat_irqs on node 2 qla2xxx 0000:44:00.1: irq 73 for MSI/MSI-X qla2xxx 0000:44:00.1: Configuring PCI space... qla2xxx 0000:44:00.1: setting latency timer to 64 qla2xxx 0000:44:00.1: Configure NVRAM parameters... qla2xxx 0000:44:00.1: Verifying loaded RISC code... qla2xxx 0000:44:00.1: firmware: requesting ql2400_fw.bin qla2xxx 0000:44:00.1: Firmware image unavailable. qla2xxx 0000:44:00.1: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. qla2xxx 0000:44:00.1: FW: Loading from flash (20000)... qla2xxx 0000:44:00.1: Unable to initialize EFT (258). qla2xxx 0000:44:00.1: Allocated (1221 KB) for firmware dump... scsi3 : qla2xxx qla2xxx 0000:44:00.1: QLogic Fibre Channel HBA Driver: 8.03.01-k8 QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA ISP2432: PCIe (2.5GT/s x4) @ 0000:44:00.1 hdma+, host#=3, fw=4.00.09 (2) scsi: waiting for bus probes to complete ... dracut: Scanning devices for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_hpdl785g501" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_hpdl785g501" now active EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_hpdl785g501-lv_root dracut: Loading SELinux policy type=1404 audit(1261469573.454:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 143823 rules. SELinux: 8192 avtab hash slots, 143823 rules. SELinux: 8 users, 12 roles, 3012 types, 142 bools, 1 sens, 1024 cats SELinux: 77 classes, 143823 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1261469574.038:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 147 type=1400 audit(1261469576.705:4): avc: denied { mmap_zero } for pid=1246 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect input: PC Speaker as /devices/platform/pcspkr/input/input4 alloc irq_desc for 40 on node 0 alloc kstat_irqs on node 0 hpwdt 0000:00:04.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 hpwdt: New timer passed in is 30 seconds. hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). piix4_smbus 0000:00:06.0: SMBus Host Controller at 0x580, revision 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 EDAC MC: Ver: 2.1.0 Dec 21 2009 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying SPMI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ipmi_si: probe of 00:02 failed with error -16 ipmi_si 0000:00:04.6: PCI INT A -> GSI 40 (level, low) -> IRQ 40 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 40 EDAC amd64_edac: Ver: 3.3.0 Dec 21 2009 IRQ 40/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 40 ip used greatest stack depth: 3640 bytes left Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.3 (Dec 03, 2009) alloc irq_desc for 37 on node 0 alloc kstat_irqs on node 0 bnx2 0000:02:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 0MB EDAC MC: 6: 1024MB 7: 0MB EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC1: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:19.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC2: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1a.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC3: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1b.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC4: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1c.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC5: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1d.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC6: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1e.2 EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 2048MB 1: 2048MB EDAC MC: 2: 1024MB 3: 1024MB EDAC MC: 4: 1024MB 5: 1024MB EDAC MC: 6: 0MB 7: 0MB EDAC MC7: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:1f.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) bnx2 0000:02:03.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw bnx2 0000:02:03.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 37, node addr 00:21:5a:de:88:fc alloc irq_desc for 38 on node 0 alloc kstat_irqs on node 0 bnx2 0000:02:04.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 bnx2 0000:02:04.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw bnx2 0000:02:04.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f8000000, IRQ 38, node addr 00:21:5a:de:88:fe EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode SELinux: initialized (dev cciss!c0d0p1, type ext4), uses xattr Adding 35721208k swap on /dev/mapper/vg_hpdl785g501-lv_swap. Priority:-1 extents:1 across:35721208k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [might have lost some stuff] DMA-API: debugging out of memory - disabling Warning: dev (pts0) tty->count(4) != #fd's(3) in tty_release_dev