Linux version 2.6.32.2 (root@darkstar) (gcc version 4.4.2 (GCC) ) #2 SMP Wed Dec 23 17:07:05 CST 2009 Command line: BOOT_IMAGE=Linux-32.2 ro root=803 console=ttyS0 console=tty1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df7b1d00 (usable) BIOS-e820: 00000000df7b1d00 - 00000000df7b3d00 (ACPI NVS) BIOS-e820: 00000000df7b3d00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI 2.4 present. last_pfn = 0x120000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E3FFF write-protect E4000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 0DF800000 mask FFF800000 uncachable 4 base 100000000 mask FE0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000df800000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdf7b1 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000df7b1000 0000000000 - 00df600000 page 2M 00df600000 - 00df7b1000 page 4k kernel direct mapping tables up to df7b1000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ c000-12000 ACPI: RSDP 00000000000e7610 00014 (v00 COMPAQ) ACPI: RSDT 00000000df7c3d40 00040 (v01 HPQOEM SLIC-BPC 20070413 00000000) ACPI: FACP 00000000df7c3de8 00074 (v01 COMPAQ BROADH2O 00000001 00000000) ACPI: DSDT 00000000df7c4143 094FE (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) ACPI: FACS 00000000df7c3d00 00040 ACPI: APIC 00000000df7c3e5c 00068 (v01 COMPAQ BROADH2O 00000001 00000000) ACPI: ASF! 00000000df7c3ec4 00063 (v32 COMPAQ BROADH2O 00000001 00000000) ACPI: MCFG 00000000df7c3f27 0003C (v01 COMPAQ BROADH2O 00000001 00000000) ACPI: TCPA 00000000df7c3f63 00032 (v01 COMPAQ BROADH2O 00000001 00000000) ACPI: SLIC 00000000df7c3f95 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000) ACPI: HPET 00000000df7c410b 00038 (v01 COMPAQ BROADH2O 00000001 00000000) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000158d1ac] TEXT DATA BSS ==> [0001000000 - 000158d1ac] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [000158e000 - 000158e0f3] BRK ==> [000158e000 - 000158e0f3] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000df7b1 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 1046352 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3839 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 897001 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at e0000000 (gap: e0000000:14000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s70616 r8192 d23592 u1048576 pcpu-alloc: s70616 r8192 d23592 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030120 Kernel command line: BOOT_IMAGE=Linux-32.2 ro root=803 console=ttyS0 console=tty1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4046908k/4718592k available (3203k kernel code, 533184k absent, 137608k reserved, 1760k data, 376k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:320 Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2394.113 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.22 BogoMIPS (lpj=23941130) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4788.09 BogoMIPS (lpj=23940459) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9576.31 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 PCI: MCFG area at f4000000 reserved in E820 PCI: Using MMCONFIG at f4000000 - f7ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88011f8132e0), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xf0400000-0xf04fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1200-0x1207] pci 0000:00:1a.0: reg 20 io port: [0x1100-0x111f] pci 0000:00:1a.1: reg 20 io port: [0x1120-0x113f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1140-0x115f] pci 0000:00:1d.1: reg 20 io port: [0x1160-0x117f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504400-0xf05047ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) pci 0000:00:1f.2: reg 10 io port: [0x1208-0x120f] pci 0000:00:1f.2: reg 14 io port: [0x1228-0x122b] pci 0000:00:1f.2: reg 18 io port: [0x1210-0x1217] pci 0000:00:1f.2: reg 1c io port: [0x122c-0x122f] pci 0000:00:1f.2: reg 20 io port: [0x11c0-0x11cf] pci 0000:00:1f.2: reg 24 io port: [0x11d0-0x11df] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.5: reg 10 io port: [0x1218-0x121f] pci 0000:00:1f.5: reg 14 io port: [0x1230-0x1233] pci 0000:00:1f.5: reg 18 io port: [0x1220-0x1227] pci 0000:00:1f.5: reg 1c io port: [0x1234-0x1237] pci 0000:00:1f.5: reg 20 io port: [0x11e0-0x11ef] pci 0000:00:1f.5: reg 24 io port: [0x11f0-0x11ff] pci 0000:00:1f.5: PME# supported from D3hot pci 0000:00:1f.5: PME# disabled pci 0000:3f:00.0: reg 10 64bit mmio: [0xf0800000-0xf080ffff] pci 0000:3f:00.0: PME# supported from D3hot D3cold pci 0000:3f:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf0600000-0xf08fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88011f8132e0), AE_ALREADY_EXISTS ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling pnp 00:0d: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0d: ioport range 0x400-0x41f has been reserved system 00:0d: ioport range 0x420-0x43f has been reserved system 00:0d: ioport range 0x440-0x45f has been reserved system 00:0d: ioport range 0x460-0x47f has been reserved system 00:0d: ioport range 0x480-0x48f has been reserved system 00:0d: ioport range 0xcb0-0xcbf has been reserved system 00:0d: ioport range 0xfa00-0xfa3f has been reserved system 00:0d: ioport range 0xfc00-0xfc7f has been reserved system 00:0d: ioport range 0xfc80-0xfcff has been reserved system 00:0d: ioport range 0xfe00-0xfe7f has been reserved system 00:0d: ioport range 0xfe80-0xfeff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved system 00:0e: iomem range 0xe4000-0xfffff could not be reserved system 00:0e: iomem range 0xfec01000-0xfecfffff has been reserved system 00:0e: iomem range 0xfed00400-0xfed3ffff has been reserved system 00:0e: iomem range 0xfed40000-0xffffffff could not be reserved system 00:0e: iomem range 0xf4000000-0xf7ffffff has been reserved system 00:0e: iomem range 0xcdc00-0xe3fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:3f pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf0600000-0xf08fffff pci 0000:00:1c.1: PREFETCH window: 0x000000f0900000-0x000000f0afffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:20: resource 0 io: [0x2000-0x2fff] pci_bus 0000:20: resource 1 mem: [0xf0000000-0xf01fffff] pci_bus 0000:20: resource 2 pref mem [0xf0200000-0xf03fffff] pci_bus 0000:3f: resource 0 io: [0x3000-0x3fff] pci_bus 0000:3f: resource 1 mem: [0xf0600000-0xf08fffff] pci_bus 0000:3f: resource 2 pref mem [0xf0900000-0xf0afffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device fuse init (API version 7.13) msgmni has been set to 7905 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: SSDT 00000000df7ce602 00320 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 Generic RTC Driver v1.07 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965Q Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 26 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x11c0 irq 14 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x11c8 irq 15 ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata2.00: XXX debounce start, SStatus=0 ata1.00: XXX debounce start, SStatus=123 ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x1218 ctl 0x1230 bmdma 0x11e0 irq 18 ata4: SATA max UDMA/133 cmd 0x1220 ctl 0x1234 bmdma 0x11e8 irq 18 tg3.c:v3.102 (September 1, 2009) tg3 0000:3f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:3f:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1b:78:b7:76:d8 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] ata1.00: XXX debounce done, SStatus=123, DET stable for 560 msecs eth0: dma_rwctrl[76180000] dma_mask[64-bit] ata4: XXX debounce start, SStatus=0 ata3: XXX debounce start, SStatus=0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ata1.01: XXX debounce start, SStatus=4 ata2.00: XXX debounce done, SStatus=0, DET stable for 540 msecs ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ata2.01: XXX debounce start, SStatus=4 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ata4: XXX debounce done, SStatus=0, DET stable for 530 msecs ata4: SATA link down (SStatus 0 SControl 300) ata3: XXX debounce done, SStatus=0, DET stable for 540 msecs ata3: SATA link down (SStatus 0 SControl 300) ata1.01: XXX debounce done, SStatus=4, DET stable for 530 msecs ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-7: WDC WD800JD-60LSA5, 10.01E03, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-60LS 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0504000 ata2.01: XXX debounce done, SStatus=4, DET stable for 1130 msecs sda: sda1 sda2 < ata2.00: SATA link down (SStatus 0 SControl 300) ata2.01: SATA link down (SStatus 4 SControl 300) ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 sda5 > sda3 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected sd 0:0:0:0: [sda] Attached SCSI disk ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0504400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001100 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001120 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001140 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001160 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 ALSA device list: #0: HDA Intel at 0xf0500000 irq 21 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 376k freed EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with writeback data mode. device tap0 entered promiscuous mode device tap1 entered promiscuous mode device tap4 entered promiscuous mode device tap6 entered promiscuous mode br0: port 4(tap6) entering learning state br0: port 3(tap4) entering learning state br0: port 2(tap1) entering learning state br0: port 1(tap0) entering learning state device tap2 entered promiscuous mode device tap5 entered promiscuous mode br1: port 2(tap5) entering learning state br1: port 1(tap2) entering learning state device tap3 entered promiscuous mode device tap7 entered promiscuous mode br2: port 2(tap7) entering learning state br2: port 1(tap3) entering learning state tg3 0000:3f:00.0: irq 27 for MSI/MSI-X tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. br0: port 4(tap6) entering forwarding state br0: port 3(tap4) entering forwarding state br0: port 2(tap1) entering forwarding state br0: port 1(tap0) entering forwarding state br1: port 2(tap5) entering forwarding state br1: port 1(tap2) entering forwarding state br2: port 2(tap7) entering forwarding state br2: port 1(tap3) entering forwarding state