[ 0.000000] Linux version 2.6.33-rc1 (nigel@nigel-laptop) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP PREEMPT Wed Dec 23 19:41:03 EST 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/head ro root=/dev/sda2 quiet vga=794 init S [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe72000 (usable) [ 0.000000] BIOS-e820: 00000000dfe72000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfe72 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe72000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfe72000 page 4k [ 0.000000] kernel direct mapping tables up to dfe72000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000 [ 0.000000] RAMDISK: 36894000 - 37fefea0 [ 0.000000] ACPI: RSDP 00000000000fbc80 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000dfe73a00 00064 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: FACP 00000000dfe7389c 000F4 (v04 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: DSDT 00000000dfe74000 04BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000dfe82800 00040 [ 0.000000] ACPI: HPET 00000000dfe73b00 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000dfe73c00 00068 (v01 DELL M08 27D8070E ASL 00000047) [ 0.000000] ACPI: MCFG 00000000dfe73bc0 0003E (v16 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: SLIC 00000000dfe73c9c 00176 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: OSFR 00000000dfe73200 0002C (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: BOOT 00000000dfe737c0 00028 (v01 DELL M08 27D8070E ASL 00000061) [ 0.000000] ACPI: SSDT 00000000dfe721c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0001b56814] TEXT DATA BSS ==> [0001000000 - 0001b56814] [ 0.000000] #2 [0036894000 - 0037fefea0] RAMDISK ==> [0036894000 - 0037fefea0] [ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #4 [0001b57000 - 0001b571ec] BRK ==> [0001b57000 - 0001b571ec] [ 0.000000] #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] [ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #7 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #8 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfe72 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048081 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 109 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898730 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfe72000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76696 r8192 d21608 u1048576 [ 0.000000] pcpu-alloc: s76696 r8192 d21608 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031844 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/head ro root=/dev/sda2 quiet vga=794 init S [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4023868k/4718592k available (4396k kernel code, 526268k absent, 167464k reserved, 4268k data, 476k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.490 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.98 BogoMIPS (lpj=21944900) [ 0.010045] Security Framework initialized [ 0.010066] Mount-cache hash table entries: 256 [ 0.010202] CPU: Physical Processor ID: 0 [ 0.010204] CPU: Processor Core ID: 0 [ 0.010206] mce: CPU supports 6 MCE banks [ 0.010214] CPU0: Thermal monitoring enabled (TM2) [ 0.010217] using mwait in idle threads. [ 0.010218] Performance Events: Core2 events, Intel PMU driver. [ 0.010223] ... version: 2 [ 0.010225] ... bit width: 40 [ 0.010226] ... generic registers: 2 [ 0.010227] ... value mask: 000000ffffffffff [ 0.010228] ... max period: 000000007fffffff [ 0.010230] ... fixed-purpose events: 3 [ 0.010231] ... event mask: 0000000700000003 [ 0.011014] ACPI: Core revision 20091214 [ 0.024913] Setting APIC routing to flat [ 0.025292] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.125311] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.160022] Booting Node 0, Processors #1 Ok. [ 0.330030] Brought up 2 CPUs [ 0.330033] Total of 2 processors activated (8777.95 BogoMIPS). [ 0.350067] PM: Adding info for No Bus:platform [ 0.350109] NET: Registered protocol family 16 [ 0.350136] PM: Adding info for No Bus:vtcon0 [ 0.350136] ACPI: bus type pci registered [ 0.350136] PM: Adding info for No Bus:id [ 0.350136] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.350136] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.352082] PCI: Using configuration type 1 for base access [ 0.352104] PM: Adding info for No Bus:default [ 0.352104] bio: create slab at 0 [ 0.370937] ACPI: EC: Look up EC in DSDT [ 0.391033] ACPI: Interpreter enabled [ 0.391037] ACPI: (supports S0 S3 S4 S5) [ 0.391055] ACPI: Using IOAPIC for interrupt routing [ 0.391104] PM: Adding info for acpi:LNXSYSTM:00 [ 0.391104] PM: Adding info for acpi:LNXCPU:00 [ 0.391104] PM: Adding info for acpi:LNXCPU:01 [ 0.391104] PM: Adding info for acpi:LNXSYBUS:00 [ 0.391104] PM: Adding info for acpi:PNP0A03:00 [ 0.391104] PM: Adding info for acpi:device:00 [ 0.391104] PM: Adding info for acpi:PNP0C02:00 [ 0.391104] PM: Adding info for acpi:PNP0F13:00 [ 0.391104] PM: Adding info for acpi:PNP0303:00 [ 0.391104] PM: Adding info for acpi:PNP0B00:00 [ 0.391104] PM: Adding info for acpi:PNP0100:00 [ 0.391104] PM: Adding info for acpi:PNP0800:00 [ 0.391104] PM: Adding info for acpi:PNP0C01:00 [ 0.391104] PM: Adding info for acpi:PNP0000:00 [ 0.391104] PM: Adding info for acpi:PNP0200:00 [ 0.391104] PM: Adding info for acpi:PNP0C04:00 [ 0.391104] PM: Adding info for acpi:PNP0103:00 [ 0.391104] PM: Adding info for acpi:device:01 [ 0.391104] PM: Adding info for acpi:device:02 [ 0.391104] PM: Adding info for acpi:device:03 [ 0.394481] PM: Adding info for acpi:device:04 [ 0.394499] PM: Adding info for acpi:device:05 [ 0.394499] PM: Adding info for acpi:device:06 [ 0.394499] PM: Adding info for acpi:device:07 [ 0.401126] PM: Adding info for acpi:device:08 [ 0.401144] PM: Adding info for acpi:device:09 [ 0.401144] PM: Adding info for acpi:device:0a [ 0.401144] PM: Adding info for acpi:device:0b [ 0.404431] PM: Adding info for acpi:device:0c [ 0.404450] PM: Adding info for acpi:device:0d [ 0.404450] PM: Adding info for acpi:device:0e [ 0.404450] PM: Adding info for acpi:device:0f [ 0.410141] PM: Adding info for acpi:device:10 [ 0.410161] PM: Adding info for acpi:device:11 [ 0.410161] PM: Adding info for acpi:device:12 [ 0.410161] PM: Adding info for acpi:device:13 [ 0.414503] PM: Adding info for acpi:device:14 [ 0.414522] PM: Adding info for acpi:device:15 [ 0.414522] PM: Adding info for acpi:device:16 [ 0.414522] PM: Adding info for acpi:device:17 [ 0.414522] PM: Adding info for acpi:device:18 [ 0.414522] PM: Adding info for acpi:device:19 [ 0.414522] PM: Adding info for acpi:device:1a [ 0.414522] PM: Adding info for acpi:device:1b [ 0.414522] PM: Adding info for acpi:device:1c [ 0.414522] PM: Adding info for acpi:device:1d [ 0.424102] PM: Adding info for acpi:device:1e [ 0.424120] PM: Adding info for acpi:device:1f [ 0.424120] PM: Adding info for acpi:device:20 [ 0.424120] PM: Adding info for acpi:device:21 [ 0.424120] PM: Adding info for acpi:device:22 [ 0.424120] PM: Adding info for acpi:device:23 [ 0.424120] PM: Adding info for acpi:device:24 [ 0.424120] PM: Adding info for acpi:device:25 [ 0.424120] PM: Adding info for acpi:device:26 [ 0.424120] PM: Adding info for acpi:device:27 [ 0.424120] PM: Adding info for acpi:device:28 [ 0.424120] PM: Adding info for acpi:device:29 [ 0.424120] PM: Adding info for acpi:device:2a [ 0.424120] PM: Adding info for acpi:device:2b [ 0.424120] PM: Adding info for acpi:device:2c [ 0.424120] PM: Adding info for acpi:device:2d [ 0.424120] PM: Adding info for acpi:LNXVIDEO:00 [ 0.424120] PM: Adding info for acpi:device:2e [ 0.424120] PM: Adding info for acpi:device:2f [ 0.424120] PM: Adding info for acpi:device:30 [ 0.424120] PM: Adding info for acpi:device:31 [ 0.424120] PM: Adding info for acpi:PNP0C01:01 [ 0.424120] PM: Adding info for acpi:PNP0C01:02 [ 0.424120] PM: Adding info for acpi:device:32 [ 0.424120] PM: Adding info for acpi:device:33 [ 0.424120] PM: Adding info for acpi:device:34 [ 0.424120] PM: Adding info for acpi:device:35 [ 0.424120] PM: Adding info for acpi:device:36 [ 0.424120] PM: Adding info for acpi:device:37 [ 0.424120] PM: Adding info for acpi:device:38 [ 0.424120] PM: Adding info for acpi:device:39 [ 0.424120] PM: Adding info for acpi:device:3a [ 0.424120] PM: Adding info for acpi:device:3b [ 0.424120] PM: Adding info for acpi:device:3c [ 0.424120] PM: Adding info for acpi:device:3d [ 0.424120] PM: Adding info for acpi:PNP0C0F:00 [ 0.424120] PM: Adding info for acpi:PNP0C0F:01 [ 0.424120] PM: Adding info for acpi:PNP0C0F:02 [ 0.424120] PM: Adding info for acpi:PNP0C0F:03 [ 0.424120] PM: Adding info for acpi:PNP0C0F:04 [ 0.424120] PM: Adding info for acpi:PNP0C0F:05 [ 0.424120] PM: Adding info for acpi:PNP0C0F:06 [ 0.424120] PM: Adding info for acpi:PNP0C0F:07 [ 0.424120] PM: Adding info for acpi:PNP0C01:03 [ 0.424120] PM: Adding info for acpi:PNP0C0D:00 [ 0.432140] PM: Adding info for acpi:PNP0C0C:00 [ 0.432157] PM: Adding info for acpi:PNP0C0E:00 [ 0.432157] PM: Adding info for acpi:ACPI0003:00 [ 0.432157] PM: Adding info for acpi:PNP0C0A:00 [ 0.432157] PM: Adding info for acpi:PNP0C32:00 [ 0.432157] PM: Adding info for acpi:pnp0c14:00 [ 0.432157] PM: Adding info for acpi:LNXTHERM:00 [ 0.432157] PM: Adding info for acpi:LNXTHERM:01 [ 0.432157] ACPI: No dock devices found. [ 0.447455] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.447468] PM: Adding info for No Bus:pci0000:00 [ 0.447476] PM: Adding info for No Bus:0000:00 [ 0.447494] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.476379] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.476382] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.476384] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.476387] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.476389] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf3ffffff] (ignored) [ 0.476391] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored) [ 0.476394] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) [ 0.476396] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) [ 0.476398] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) [ 0.476400] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) [ 0.476403] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) [ 0.476405] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored) [ 0.476407] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] (ignored) [ 0.476486] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.476489] pci 0000:00:01.0: PME# disabled [ 0.476577] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.476642] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.476706] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.476771] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.476776] pci 0000:00:1a.7: PME# disabled [ 0.476822] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] [ 0.476885] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.476889] pci 0000:00:1b.0: PME# disabled [ 0.476987] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.476992] pci 0000:00:1c.0: PME# disabled [ 0.477093] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.477098] pci 0000:00:1c.1: PME# disabled [ 0.477202] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.477207] pci 0000:00:1c.4: PME# disabled [ 0.477271] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.477335] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.477401] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.477463] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.477528] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.477533] pci 0000:00:1d.7: PME# disabled [ 0.477700] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.477704] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.477709] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.477712] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.477716] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.477770] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.477778] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.477786] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.477794] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.477801] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.477865] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.477873] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.477880] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.477888] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.477896] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.477903] pci 0000:00:1f.2: reg 24: [mem 0xfebfb800-0xfebfbfff] [ 0.477947] pci 0000:00:1f.2: PME# supported from D3hot [ 0.477952] pci 0000:00:1f.2: PME# disabled [ 0.477984] pci 0000:00:1f.3: reg 10: [mem 0xfebfb700-0xfebfb7ff] [ 0.478009] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.478076] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.478092] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.478107] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.478116] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 0.478125] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.478232] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.478235] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.478238] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.478242] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.478305] pci 0000:09:00.0: reg 10: [mem 0xf9ffc000-0xf9ffffff 64bit] [ 0.478316] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] [ 0.478406] pci 0000:09:00.0: supports D1 D2 [ 0.478408] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.478414] pci 0000:09:00.0: PME# disabled [ 0.478489] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.478494] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.478498] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.478651] pci 0000:0b:00.0: reg 10: [mem 0xf9eff000-0xf9efffff] [ 0.478895] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.478907] pci 0000:0b:00.0: PME# disabled [ 0.479012] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.479020] pci 0000:00:1c.1: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.479086] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.479090] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.479095] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff] [ 0.479103] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.479159] pci 0000:03:09.0: reg 10: [mem 0xf9bff800-0xf9bfffff] [ 0.479221] pci 0000:03:09.0: supports D1 D2 [ 0.479223] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.479228] pci 0000:03:09.0: PME# disabled [ 0.479266] pci 0000:03:09.1: reg 10: [mem 0xf9bff500-0xf9bff5ff] [ 0.479327] pci 0000:03:09.1: supports D1 D2 [ 0.479329] pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.479333] pci 0000:03:09.1: PME# disabled [ 0.479372] pci 0000:03:09.2: reg 10: [mem 0xf9bff600-0xf9bff6ff] [ 0.479433] pci 0000:03:09.2: supports D1 D2 [ 0.479435] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.479439] pci 0000:03:09.2: PME# disabled [ 0.479476] pci 0000:03:09.3: reg 10: [mem 0xf9bff700-0xf9bff7ff] [ 0.479538] pci 0000:03:09.3: supports D1 D2 [ 0.479540] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.479544] pci 0000:03:09.3: PME# disabled [ 0.479604] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.479612] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.479647] pci_bus 0000:00: on NUMA node 0 [ 0.479651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.479878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.479985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.480053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.480116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.480185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.480824] PM: Adding info for pci:0000:00:00.0 [ 0.480845] PM: Adding info for pci:0000:00:01.0 [ 0.480845] PM: Adding info for pci:0000:00:1a.0 [ 0.480845] PM: Adding info for pci:0000:00:1a.1 [ 0.480845] PM: Adding info for pci:0000:00:1a.7 [ 0.480845] PM: Adding info for pci:0000:00:1b.0 [ 0.480845] PM: Adding info for pci:0000:00:1c.0 [ 0.480845] PM: Adding info for pci:0000:00:1c.1 [ 0.480845] PM: Adding info for pci:0000:00:1c.4 [ 0.480845] PM: Adding info for pci:0000:00:1d.0 [ 0.480845] PM: Adding info for pci:0000:00:1d.1 [ 0.480845] PM: Adding info for pci:0000:00:1d.2 [ 0.480845] PM: Adding info for pci:0000:00:1d.7 [ 0.480845] PM: Adding info for pci:0000:00:1e.0 [ 0.480845] PM: Adding info for pci:0000:00:1f.0 [ 0.480845] PM: Adding info for pci:0000:00:1f.1 [ 0.490469] PM: Adding info for pci:0000:00:1f.2 [ 0.490577] PM: Adding info for pci:0000:00:1f.3 [ 0.490595] PM: Adding info for pci:0000:01:00.0 [ 0.490595] PM: Adding info for No Bus:0000:01 [ 0.490595] PM: Adding info for pci:0000:09:00.0 [ 0.490595] PM: Adding info for No Bus:0000:09 [ 0.490595] PM: Adding info for pci:0000:0b:00.0 [ 0.490595] PM: Adding info for No Bus:0000:0b [ 0.490595] PM: Adding info for No Bus:0000:0c [ 0.490595] PM: Adding info for pci:0000:03:09.0 [ 0.490595] PM: Adding info for pci:0000:03:09.1 [ 0.490595] PM: Adding info for pci:0000:03:09.2 [ 0.490595] PM: Adding info for pci:0000:03:09.3 [ 0.490595] PM: Adding info for No Bus:0000:03 [ 0.490595] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.490595] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.490595] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.490595] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.490595] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.490609] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.490716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.490811] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.490873] PM: Adding info for No Bus:vga_arbiter [ 0.490873] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.490873] vgaarb: loaded [ 0.490873] SCSI subsystem initialized [ 0.510020] libata version 3.00 loaded. [ 0.510062] usbcore: registered new interface driver usbfs [ 0.510062] usbcore: registered new interface driver hub [ 0.510062] usbcore: registered new device driver usb [ 0.510062] PM: Adding info for No Bus:8D9DDCBC-A997-11DA-B012-B622A1EF5492 [ 0.510062] PM: Adding info for No Bus:A80593CE-A997-11DA-B012-B622A1EF5492 [ 0.510062] PM: Adding info for No Bus:9DBB5994-A997-11DA-B012-B622A1EF5492 [ 0.510062] PM: Adding info for No Bus:A3776CE0-1E88-11DB-A98B-0800200C9A66 [ 0.510062] PM: Adding info for No Bus:05901221-D566-11D1-B2F0-00A0C9062910 [ 0.510062] ACPI: WMI: Mapper loaded [ 0.510062] PCI: Using ACPI for IRQ routing [ 0.510062] PCI: pci_cache_line_size set to 64 bytes [ 0.510191] PM: Adding info for No Bus:lo [ 0.510191] PM: Adding info for No Bus:rfkill [ 0.510191] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.510191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.510191] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.520008] Switching to clocksource tsc [ 0.540046] pnp: PnP ACPI init [ 0.540054] PM: Adding info for No Bus:pnp0 [ 0.540056] ACPI: bus type pnp registered [ 0.554546] PM: Adding info for pnp:00:00 [ 0.554623] PM: Adding info for pnp:00:01 [ 0.554697] PM: Adding info for pnp:00:02 [ 0.554766] PM: Adding info for pnp:00:03 [ 0.554833] PM: Adding info for pnp:00:04 [ 0.554902] PM: Adding info for pnp:00:05 [ 0.554983] PM: Adding info for pnp:00:06 [ 0.555052] PM: Adding info for pnp:00:07 [ 0.555121] PM: Adding info for pnp:00:08 [ 0.555260] PM: Adding info for pnp:00:09 [ 0.555507] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.555510] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.555549] PM: Adding info for pnp:00:0a [ 0.555617] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.555620] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.555623] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.555661] PM: Adding info for pnp:00:0b [ 0.574090] PM: Adding info for pnp:00:0c [ 0.574234] pnp: PnP ACPI: found 13 devices [ 0.574236] ACPI: ACPI bus type pnp unregistered [ 0.574244] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.574247] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.574253] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.574258] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.574263] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.574266] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.574272] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.574274] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.574277] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.574279] system 00:0b: [io 0x0809] has been reserved [ 0.574284] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.574286] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.574289] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved [ 0.574291] system 00:0c: [mem 0x000e0000-0x000fffff] has been reserved [ 0.574294] system 00:0c: [mem 0x00100000-0xdfe71fff] could not be reserved [ 0.574296] system 00:0c: [mem 0xdfe72000-0xdfefffff] has been reserved [ 0.574299] system 00:0c: [mem 0xdff00000-0xdfffffff] has been reserved [ 0.574301] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.574304] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.574306] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.574309] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.574311] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.574314] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.574317] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.574319] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.574321] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.574324] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.574326] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.574390] PM: Adding info for No Bus:mem [ 0.574421] PM: Adding info for No Bus:kmem [ 0.574452] PM: Adding info for No Bus:null [ 0.574483] PM: Adding info for No Bus:port [ 0.574514] PM: Adding info for No Bus:zero [ 0.574547] PM: Adding info for No Bus:full [ 0.574578] PM: Adding info for No Bus:random [ 0.574610] PM: Adding info for No Bus:urandom [ 0.574641] PM: Adding info for No Bus:kmsg [ 0.594583] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.594587] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.594590] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff] [ 0.594592] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] [ 0.594595] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.594597] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.594601] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff] [ 0.594604] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.594609] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.594612] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.594618] pci 0000:00:1c.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.594623] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.594631] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.594635] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.594641] pci 0000:00:1c.1: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.594646] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.594654] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.594657] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.594663] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff] [ 0.594668] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.594676] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.594678] pci 0000:00:1e.0: bridge window [io disabled] [ 0.594684] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff] [ 0.594689] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.594705] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.594708] pci 0000:00:01.0: setting latency timer to 64 [ 0.594718] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.594722] pci 0000:00:1c.0: setting latency timer to 64 [ 0.594733] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.594738] pci 0000:00:1c.1: setting latency timer to 64 [ 0.594748] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.594752] pci 0000:00:1c.4: setting latency timer to 64 [ 0.594760] pci 0000:00:1e.0: setting latency timer to 64 [ 0.594764] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.594766] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.594769] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.594770] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff] [ 0.594773] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.594775] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.594777] pci_bus 0000:09: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.594779] pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.594781] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.594783] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.594785] pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.594787] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 0.594789] pci_bus 0000:0c: resource 1 [mem 0xf9c00000-0xf9dfffff] [ 0.594791] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.594794] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff] [ 0.594796] pci_bus 0000:03: resource 3 [io 0x0000-0xffff] [ 0.594798] pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 0.594833] NET: Registered protocol family 2 [ 0.594886] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.595363] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.597164] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.597755] TCP: Hash tables configured (established 262144 bind 65536) [ 0.597757] TCP reno registered [ 0.597761] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.597799] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.597935] NET: Registered protocol family 1 [ 0.597962] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.597964] pci 0000:00:1a.0: Performing full reset [ 0.597986] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.597987] pci 0000:00:1a.1: Performing full reset [ 0.598056] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.598057] pci 0000:00:1d.0: Performing full reset [ 0.598078] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.598080] pci 0000:00:1d.1: Performing full reset [ 0.598100] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 0.598102] pci 0000:00:1d.2: Performing full reset [ 0.598171] pci 0000:01:00.0: Boot video device [ 0.598236] PCI: CLS 64 bytes, default 64 [ 0.598294] Unpacking initramfs... [ 0.828377] Freeing initrd memory: 23919k freed [ 0.841057] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.841062] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.841064] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.841253] Simple Boot Flag at 0x79 set to 0x1 [ 0.841695] PM: Adding info for No Bus:mcelog [ 0.841774] PM: Adding info for No Bus:msr0 [ 0.841810] PM: Adding info for No Bus:msr1 [ 0.841877] PM: Adding info for No Bus:cpu0 [ 0.841914] PM: Adding info for No Bus:cpu1 [ 0.842007] PM: Adding info for platform:pcspkr [ 0.842234] PM: Adding info for No Bus:snapshot [ 0.842265] audit: initializing netlink socket (disabled) [ 0.842279] type=2000 audit(1261648936.830:1): initialized [ 0.842593] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.860093] VFS: Disk quotas dquot_6.5.2 [ 0.860117] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.860251] NTFS driver 2.1.29 [Flags: R/O]. [ 0.860278] fuse init (API version 7.13) [ 0.860297] PM: Adding info for No Bus:fuse [ 0.860339] msgmni has been set to 7907 [ 0.880168] alg: No test for stdrng (krng) [ 0.880177] io scheduler noop registered (default) [ 0.880178] io scheduler deadline registered [ 0.880189] io scheduler cfq registered [ 0.880299] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.880331] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.880341] PM: Adding info for pci_express:0000:00:01.0:pcie01 [ 0.880373] PM: Adding info for pci_express:0000:00:01.0:pcie04 [ 0.880405] PM: Adding info for pci_express:0000:00:01.0:pcie08 [ 0.880464] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.880517] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.880531] PM: Adding info for pci_express:0000:00:1c.0:pcie01 [ 0.880562] PM: Adding info for pci_express:0000:00:1c.0:pcie04 [ 0.880593] PM: Adding info for pci_express:0000:00:1c.0:pcie08 [ 0.880679] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.880733] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.880747] PM: Adding info for pci_express:0000:00:1c.1:pcie01 [ 0.880779] PM: Adding info for pci_express:0000:00:1c.1:pcie04 [ 0.880811] PM: Adding info for pci_express:0000:00:1c.1:pcie08 [ 0.880894] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.880948] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.880961] PM: Adding info for pci_express:0000:00:1c.4:pcie01 [ 0.880992] PM: Adding info for pci_express:0000:00:1c.4:pcie04 [ 0.881025] PM: Adding info for pci_express:0000:00:1c.4:pcie08 [ 0.881194] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.881204] PM: Adding info for No Bus:fbcon [ 0.881267] PM: Adding info for platform:vesafb.0 [ 0.881397] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90004100000, using 2560k, total 2560k [ 0.881400] vesafb: mode is 1280x1024x16, linelength=2560, pages=0 [ 0.881401] vesafb: scrolling: redraw [ 0.881404] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.881417] PM: Adding info for No Bus:fb0 [ 0.881478] PM: Adding info for No Bus:vtcon1 [ 0.921216] Console: switching to colour frame buffer device 160x64 [ 0.958175] fb0: VESA VGA frame buffer device [ 0.958733] ACPI: SSDT 00000000dfe72cf6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.959222] ACPI: SSDT 00000000dfe7268c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.959994] Monitor-Mwait will be used to enter C-1 state [ 0.969988] Monitor-Mwait will be used to enter C-2 state [ 0.979988] Monitor-Mwait will be used to enter C-3 state [ 0.979992] Marking TSC unstable due to TSC halts in idle [ 0.980062] PM: Adding info for No Bus:cooling_device0 [ 0.980075] Switching to clocksource hpet [ 0.980420] ACPI: SSDT 00000000dfe72f7c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.980754] ACPI: SSDT 00000000dfe72c71 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.981273] PM: Adding info for No Bus:cooling_device1 [ 0.984709] PM: Adding info for No Bus:thermal_zone0 [ 0.984828] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.984835] ACPI: Thermal Zone [THM] (68 C) [ 0.984894] PM: Adding info for No Bus:tty [ 0.984933] PM: Adding info for No Bus:console [ 0.984974] PM: Adding info for No Bus:tty0 [ 0.985043] PM: Adding info for No Bus:vcs [ 0.985079] PM: Adding info for No Bus:vcsa [ 0.985115] PM: Adding info for No Bus:vcs1 [ 0.985153] PM: Adding info for No Bus:vcsa1 [ 0.985191] PM: Adding info for No Bus:tty1 [ 0.985228] PM: Adding info for No Bus:tty2 [ 0.985265] PM: Adding info for No Bus:tty3 [ 0.985302] PM: Adding info for No Bus:tty4 [ 0.985339] PM: Adding info for No Bus:tty5 [ 0.985377] PM: Adding info for No Bus:tty6 [ 0.985415] PM: Adding info for No Bus:tty7 [ 0.985452] PM: Adding info for No Bus:tty8 [ 0.985490] PM: Adding info for No Bus:tty9 [ 0.985527] PM: Adding info for No Bus:tty10 [ 0.985565] PM: Adding info for No Bus:tty11 [ 0.985604] PM: Adding info for No Bus:tty12 [ 0.985642] PM: Adding info for No Bus:tty13 [ 0.985680] PM: Adding info for No Bus:tty14 [ 0.985719] PM: Adding info for No Bus:tty15 [ 0.985758] PM: Adding info for No Bus:tty16 [ 0.985797] PM: Adding info for No Bus:tty17 [ 0.985837] PM: Adding info for No Bus:tty18 [ 0.985876] PM: Adding info for No Bus:tty19 [ 0.985915] PM: Adding info for No Bus:tty20 [ 0.985953] PM: Adding info for No Bus:tty21 [ 0.985992] PM: Adding info for No Bus:tty22 [ 0.986032] PM: Adding info for No Bus:tty23 [ 0.986071] PM: Adding info for No Bus:tty24 [ 0.986110] PM: Adding info for No Bus:tty25 [ 0.986150] PM: Adding info for No Bus:tty26 [ 0.986190] PM: Adding info for No Bus:tty27 [ 0.986230] PM: Adding info for No Bus:tty28 [ 0.986270] PM: Adding info for No Bus:tty29 [ 0.986310] PM: Adding info for No Bus:tty30 [ 0.986350] PM: Adding info for No Bus:tty31 [ 0.986390] PM: Adding info for No Bus:tty32 [ 0.986429] PM: Adding info for No Bus:tty33 [ 0.986469] PM: Adding info for No Bus:tty34 [ 0.986509] PM: Adding info for No Bus:tty35 [ 0.986550] PM: Adding info for No Bus:tty36 [ 0.986589] PM: Adding info for No Bus:tty37 [ 0.986629] PM: Adding info for No Bus:tty38 [ 0.986669] PM: Adding info for No Bus:tty39 [ 0.986710] PM: Adding info for No Bus:tty40 [ 0.986751] PM: Adding info for No Bus:tty41 [ 0.986793] PM: Adding info for No Bus:tty42 [ 0.986834] PM: Adding info for No Bus:tty43 [ 0.986874] PM: Adding info for No Bus:tty44 [ 0.986917] PM: Adding info for No Bus:tty45 [ 0.986958] PM: Adding info for No Bus:tty46 [ 0.987000] PM: Adding info for No Bus:tty47 [ 0.987044] PM: Adding info for No Bus:tty48 [ 0.987085] PM: Adding info for No Bus:tty49 [ 0.987126] PM: Adding info for No Bus:tty50 [ 0.987167] PM: Adding info for No Bus:tty51 [ 0.987208] PM: Adding info for No Bus:tty52 [ 0.987250] PM: Adding info for No Bus:tty53 [ 0.987292] PM: Adding info for No Bus:tty54 [ 0.987334] PM: Adding info for No Bus:tty55 [ 0.987377] PM: Adding info for No Bus:tty56 [ 0.987419] PM: Adding info for No Bus:tty57 [ 0.987461] PM: Adding info for No Bus:tty58 [ 0.987502] PM: Adding info for No Bus:tty59 [ 0.987546] PM: Adding info for No Bus:tty60 [ 0.987588] PM: Adding info for No Bus:tty61 [ 0.987630] PM: Adding info for No Bus:tty62 [ 0.987673] PM: Adding info for No Bus:tty63 [ 0.987736] PM: Adding info for No Bus:ptmx [ 0.987786] PM: Adding info for No Bus:hpet [ 0.987937] PM: Adding info for No Bus:nvram [ 0.987972] Non-volatile memory driver v1.3 [ 0.987974] Linux agpgart interface v0.103 [ 0.988116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.988137] PM: Adding info for platform:serial8250 [ 0.988197] PM: Adding info for No Bus:ttyS0 [ 0.988252] PM: Adding info for No Bus:ttyS1 [ 0.988304] PM: Adding info for No Bus:ttyS2 [ 0.988358] PM: Adding info for No Bus:ttyS3 [ 0.988899] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.988940] sky2 driver version 1.26 [ 0.988969] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.988982] sky2 0000:09:00.0: setting latency timer to 64 [ 0.989015] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 0.989132] sky2 0000:09:00.0: irq 28 for MSI/MSI-X [ 0.989227] PM: Adding info for No Bus:eth0 [ 0.989384] sky2 eth0: addr 00:15:c5:83:3e:24 [ 0.989449] console [netcon0] enabled [ 0.989450] netconsole: network logging started [ 0.989463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.989465] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 0.989489] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.989499] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.989502] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.989509] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.989517] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 0.989521] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.989553] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.989558] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 0.993427] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.993429] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.993442] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.993447] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.997324] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 1.022515] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.022538] usb usb1: default language 0x0409 [ 1.022544] usb usb1: udev 1, busnum 1, minor = 0 [ 1.022546] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.022548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.022550] usb usb1: Product: EHCI Host Controller [ 1.022551] usb usb1: Manufacturer: Linux 2.6.33-rc1 ehci_hcd [ 1.022553] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.022578] PM: Adding info for usb:usb1 [ 1.022587] usb usb1: uevent [ 1.022623] usb usb1: usb_probe_device [ 1.022625] usb usb1: configuration #1 chosen from 1 choice [ 1.022632] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.022641] PM: Adding info for usb:1-0:1.0 [ 1.022645] usb 1-0:1.0: uevent [ 1.022678] hub 1-0:1.0: usb_probe_interface [ 1.022680] hub 1-0:1.0: usb_probe_interface - got id [ 1.022681] hub 1-0:1.0: USB hub found [ 1.022686] hub 1-0:1.0: 4 ports detected [ 1.022687] hub 1-0:1.0: standalone hub [ 1.022688] hub 1-0:1.0: no power switching (usb 1.0) [ 1.022690] hub 1-0:1.0: individual port over-current protection [ 1.022692] hub 1-0:1.0: power on to power good time: 20ms [ 1.022696] hub 1-0:1.0: local power source is good [ 1.022698] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.022723] PM: Adding info for No Bus:ep_81 [ 1.022732] PM: Adding info for No Bus:ep_00 [ 1.022751] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.022761] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.022764] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.022769] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.022776] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.022780] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 1.022806] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.022810] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 1.026690] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.026691] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 1.026703] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.026707] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.030587] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 1.042516] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.042545] usb usb2: default language 0x0409 [ 1.042551] usb usb2: udev 1, busnum 2, minor = 128 [ 1.042553] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.042555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.042557] usb usb2: Product: EHCI Host Controller [ 1.042558] usb usb2: Manufacturer: Linux 2.6.33-rc1 ehci_hcd [ 1.042560] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.042582] PM: Adding info for usb:usb2 [ 1.042590] usb usb2: uevent [ 1.042622] usb usb2: usb_probe_device [ 1.042624] usb usb2: configuration #1 chosen from 1 choice [ 1.042629] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.042639] PM: Adding info for usb:2-0:1.0 [ 1.042642] usb 2-0:1.0: uevent [ 1.042674] hub 2-0:1.0: usb_probe_interface [ 1.042676] hub 2-0:1.0: usb_probe_interface - got id [ 1.042677] hub 2-0:1.0: USB hub found [ 1.042683] hub 2-0:1.0: 6 ports detected [ 1.042685] hub 2-0:1.0: standalone hub [ 1.042686] hub 2-0:1.0: no power switching (usb 1.0) [ 1.042687] hub 2-0:1.0: individual port over-current protection [ 1.042689] hub 2-0:1.0: power on to power good time: 20ms [ 1.042692] hub 2-0:1.0: local power source is good [ 1.042694] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.042723] PM: Adding info for No Bus:ep_81 [ 1.042733] PM: Adding info for No Bus:ep_00 [ 1.042772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.042774] ohci_hcd: block sizes: ed 80 td 96 [ 1.042813] uhci_hcd: USB Universal Host Controller Interface driver [ 1.042837] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.042844] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.042847] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.042851] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.042859] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.042864] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.042866] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.042882] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.042887] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.042918] usb usb3: default language 0x0409 [ 1.042923] usb usb3: udev 1, busnum 3, minor = 256 [ 1.042925] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.042927] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.042929] usb usb3: Product: UHCI Host Controller [ 1.042930] usb usb3: Manufacturer: Linux 2.6.33-rc1 uhci_hcd [ 1.042932] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.042959] PM: Adding info for usb:usb3 [ 1.042968] usb usb3: uevent [ 1.043002] usb usb3: usb_probe_device [ 1.043004] usb usb3: configuration #1 chosen from 1 choice [ 1.043010] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.043019] PM: Adding info for usb:3-0:1.0 [ 1.043022] usb 3-0:1.0: uevent [ 1.043054] hub 3-0:1.0: usb_probe_interface [ 1.043056] hub 3-0:1.0: usb_probe_interface - got id [ 1.043058] hub 3-0:1.0: USB hub found [ 1.043062] hub 3-0:1.0: 2 ports detected [ 1.043063] hub 3-0:1.0: standalone hub [ 1.043064] hub 3-0:1.0: no power switching (usb 1.0) [ 1.043066] hub 3-0:1.0: individual port over-current protection [ 1.043067] hub 3-0:1.0: power on to power good time: 2ms [ 1.043071] hub 3-0:1.0: local power source is good [ 1.043072] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.043085] PM: Adding info for No Bus:ep_81 [ 1.043095] PM: Adding info for No Bus:ep_00 [ 1.043116] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.043122] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.043125] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.043129] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.043136] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.043141] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.043142] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.043158] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.043170] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.043204] usb usb4: default language 0x0409 [ 1.043209] usb usb4: udev 1, busnum 4, minor = 384 [ 1.043211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043213] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043215] usb usb4: Product: UHCI Host Controller [ 1.043216] usb usb4: Manufacturer: Linux 2.6.33-rc1 uhci_hcd [ 1.043218] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.043239] PM: Adding info for usb:usb4 [ 1.043247] usb usb4: uevent [ 1.043280] usb usb4: usb_probe_device [ 1.043282] usb usb4: configuration #1 chosen from 1 choice [ 1.043287] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.043296] PM: Adding info for usb:4-0:1.0 [ 1.043299] usb 4-0:1.0: uevent [ 1.043332] hub 4-0:1.0: usb_probe_interface [ 1.043334] hub 4-0:1.0: usb_probe_interface - got id [ 1.043336] hub 4-0:1.0: USB hub found [ 1.043340] hub 4-0:1.0: 2 ports detected [ 1.043341] hub 4-0:1.0: standalone hub [ 1.043342] hub 4-0:1.0: no power switching (usb 1.0) [ 1.043344] hub 4-0:1.0: individual port over-current protection [ 1.043346] hub 4-0:1.0: power on to power good time: 2ms [ 1.043349] hub 4-0:1.0: local power source is good [ 1.043351] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.043362] PM: Adding info for No Bus:ep_81 [ 1.043372] PM: Adding info for No Bus:ep_00 [ 1.043393] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.043399] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.043402] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.043406] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.043414] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.043419] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.043420] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.043436] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.043440] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.043471] usb usb5: default language 0x0409 [ 1.043477] usb usb5: udev 1, busnum 5, minor = 512 [ 1.043479] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043481] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043482] usb usb5: Product: UHCI Host Controller [ 1.043484] usb usb5: Manufacturer: Linux 2.6.33-rc1 uhci_hcd [ 1.043486] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.043506] PM: Adding info for usb:usb5 [ 1.043513] usb usb5: uevent [ 1.043549] usb usb5: usb_probe_device [ 1.043551] usb usb5: configuration #1 chosen from 1 choice [ 1.043556] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.043566] PM: Adding info for usb:5-0:1.0 [ 1.043569] usb 5-0:1.0: uevent [ 1.043602] hub 5-0:1.0: usb_probe_interface [ 1.043603] hub 5-0:1.0: usb_probe_interface - got id [ 1.043605] hub 5-0:1.0: USB hub found [ 1.043609] hub 5-0:1.0: 2 ports detected [ 1.043610] hub 5-0:1.0: standalone hub [ 1.043612] hub 5-0:1.0: no power switching (usb 1.0) [ 1.043613] hub 5-0:1.0: individual port over-current protection [ 1.043615] hub 5-0:1.0: power on to power good time: 2ms [ 1.043618] hub 5-0:1.0: local power source is good [ 1.043620] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.043631] PM: Adding info for No Bus:ep_81 [ 1.043640] PM: Adding info for No Bus:ep_00 [ 1.043657] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.043663] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.043667] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.043671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.043678] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.043682] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.043684] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.043699] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.043703] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.043735] usb usb6: default language 0x0409 [ 1.043740] usb usb6: udev 1, busnum 6, minor = 640 [ 1.043742] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043744] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043746] usb usb6: Product: UHCI Host Controller [ 1.043748] usb usb6: Manufacturer: Linux 2.6.33-rc1 uhci_hcd [ 1.043749] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.043770] PM: Adding info for usb:usb6 [ 1.043778] usb usb6: uevent [ 1.043811] usb usb6: usb_probe_device [ 1.043813] usb usb6: configuration #1 chosen from 1 choice [ 1.043818] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.043828] PM: Adding info for usb:6-0:1.0 [ 1.043831] usb 6-0:1.0: uevent [ 1.043864] hub 6-0:1.0: usb_probe_interface [ 1.043866] hub 6-0:1.0: usb_probe_interface - got id [ 1.043868] hub 6-0:1.0: USB hub found [ 1.043872] hub 6-0:1.0: 2 ports detected [ 1.043873] hub 6-0:1.0: standalone hub [ 1.043874] hub 6-0:1.0: no power switching (usb 1.0) [ 1.043876] hub 6-0:1.0: individual port over-current protection [ 1.043877] hub 6-0:1.0: power on to power good time: 2ms [ 1.043881] hub 6-0:1.0: local power source is good [ 1.043883] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.043894] PM: Adding info for No Bus:ep_81 [ 1.043903] PM: Adding info for No Bus:ep_00 [ 1.043920] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.043927] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.043930] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.043934] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.043942] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.043946] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.043948] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.043963] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.043967] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.043998] usb usb7: default language 0x0409 [ 1.044004] usb usb7: udev 1, busnum 7, minor = 768 [ 1.044006] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.044008] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.044009] usb usb7: Product: UHCI Host Controller [ 1.044011] usb usb7: Manufacturer: Linux 2.6.33-rc1 uhci_hcd [ 1.044013] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.044034] PM: Adding info for usb:usb7 [ 1.044043] usb usb7: uevent [ 1.044077] usb usb7: usb_probe_device [ 1.044079] usb usb7: configuration #1 chosen from 1 choice [ 1.044083] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.044092] PM: Adding info for usb:7-0:1.0 [ 1.044096] usb 7-0:1.0: uevent [ 1.044130] hub 7-0:1.0: usb_probe_interface [ 1.044132] hub 7-0:1.0: usb_probe_interface - got id [ 1.044134] hub 7-0:1.0: USB hub found [ 1.044137] hub 7-0:1.0: 2 ports detected [ 1.044139] hub 7-0:1.0: standalone hub [ 1.044140] hub 7-0:1.0: no power switching (usb 1.0) [ 1.044141] hub 7-0:1.0: individual port over-current protection [ 1.044143] hub 7-0:1.0: power on to power good time: 2ms [ 1.044146] hub 7-0:1.0: local power source is good [ 1.044148] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.044160] PM: Adding info for No Bus:ep_81 [ 1.044169] PM: Adding info for No Bus:ep_00 [ 1.044256] usbcore: registered new interface driver usblp [ 1.044258] Initializing USB Mass Storage driver... [ 1.044313] usbcore: registered new interface driver usb-storage [ 1.044315] USB Mass Storage support registered. [ 1.044371] usbcore: registered new interface driver libusual [ 1.044451] usbcore: registered new interface driver usbserial [ 1.044486] USB Serial support registered for generic [ 1.044526] usbcore: registered new interface driver usbserial_generic [ 1.044528] usbserial: USB Serial Driver core [ 1.044562] USB Serial support registered for FTDI USB Serial Device [ 1.044630] usbcore: registered new interface driver ftdi_sio [ 1.044632] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver [ 1.044666] USB Serial support registered for PocketPC PDA [ 1.044730] usbcore: registered new interface driver ipaq [ 1.044732] ipaq: v0.5:USB PocketPC PDA driver [ 1.044823] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.044843] PM: Adding info for platform:i8042 [ 1.055738] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.055743] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.055759] PM: Adding info for serio:serio0 [ 1.055795] PM: Adding info for No Bus:mice [ 1.055809] PM: Adding info for serio:serio1 [ 1.055845] mice: PS/2 mouse device common for all mice [ 1.056603] PM: Adding info for No Bus:input0 [ 1.056645] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 1.056660] PM: Adding info for No Bus:event0 [ 1.056724] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.056748] rtc_cmos 00:04: RTC can wake from S4 [ 1.056766] PM: Adding info for No Bus:rtc0 [ 1.056803] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.056835] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.056907] PM: Adding info for platform:coretemp.0 [ 1.056973] PM: Adding info for No Bus:hwmon0 [ 1.057011] PM: Adding info for platform:coretemp.1 [ 1.057054] PM: Adding info for No Bus:hwmon1 [ 1.057087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 1.057126] PM: Adding info for platform:iTCO_wdt [ 1.057192] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 1.057225] PM: Adding info for No Bus:watchdog [ 1.057258] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.057563] cpuidle: using governor ladder [ 1.058059] cpuidle: using governor menu [ 1.058104] sdhci: Secure Digital Host Controller Interface driver [ 1.058105] sdhci: Copyright(c) Pierre Ossman [ 1.058120] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22) [ 1.058139] sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.060184] PM: Adding info for No Bus:mmc0:: [ 1.060254] Registered led device: mmc0:: [ 1.060263] PM: Adding info for No Bus:mmc0 [ 1.061340] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA [ 1.061373] ricoh-mmc: Ricoh MMC Controller disabling driver [ 1.061375] ricoh-mmc: Copyright(c) Philip Langdale [ 1.061453] PM: Adding info for platform:dell_rbu [ 1.061587] PM: Adding info for platform:dcdbas [ 1.061655] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.061802] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 1.061819] PM: Adding info for No Bus:timer [ 1.061898] PM: Adding info for No Bus:seq [ 1.061988] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.062036] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 1.062065] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1.079204] PM: Adding info for No Bus:input1 [ 1.079366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.079393] PM: Adding info for No Bus:event1 [ 1.122544] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 1.122548] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.122557] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 1.122560] hub 1-0:1.0: port 2: status 0501 change 0001 [ 1.142604] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 1.142609] hub 2-0:1.0: port 1: status 0501 change 0001 [ 1.142622] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 1.142627] hub 2-0:1.0: port 2: status 0501 change 0001 [ 1.142639] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 1.142643] hub 2-0:1.0: port 3: status 0501 change 0001 [ 1.142661] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT [ 1.142666] hub 2-0:1.0: port 6: status 0501 change 0001 [ 1.142681] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 1.142694] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00 [ 1.142729] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 [ 1.142743] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00 [ 1.142751] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.142757] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 [ 1.142788] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 1.222624] hub 1-0:1.0: state 7 ports 4 chg 0006 evt 0000 [ 1.222634] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.280360] ehci_hcd 0000:00:1a.7: port 1 high speed [ 1.280363] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.340052] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.400236] ehci_hcd 0000:00:1a.7: port 1 high speed [ 1.400242] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.496715] usb 1-1: skipped 1 descriptor after configuration [ 1.496718] usb 1-1: skipped 7 descriptors after interface [ 1.496720] usb 1-1: skipped 1 descriptor after endpoint [ 1.496722] usb 1-1: skipped 19 descriptors after interface [ 1.496724] usb 1-1: skipped 1 descriptor after endpoint [ 1.496918] usb 1-1: default language 0x0409 [ 1.497919] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.497923] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 1.497926] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.497930] usb 1-1: Product: Laptop Integrated Webcam [ 1.497933] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 1.497978] PM: Adding info for usb:1-1 [ 1.497997] usb 1-1: uevent [ 1.498147] usb 1-1: usb_probe_device [ 1.498150] usb 1-1: configuration #1 chosen from 1 choice [ 1.498277] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.498300] PM: Adding info for usb:1-1:1.0 [ 1.498672] usb 1-1:1.0: uevent [ 1.498822] usbserial_generic 1-1:1.0: usb_probe_interface [ 1.498826] usbserial_generic 1-1:1.0: usb_probe_interface - got id [ 1.498870] PM: Adding info for No Bus:ep_83 [ 1.498875] usb 1-1: adding 1-1:1.1 (config #1, interface 1) [ 1.498895] PM: Adding info for usb:1-1:1.1 [ 1.498899] usb 1-1:1.1: uevent [ 1.499007] usbserial_generic 1-1:1.1: usb_probe_interface [ 1.499009] usbserial_generic 1-1:1.1: usb_probe_interface - got id [ 1.499029] PM: Adding info for No Bus:ep_00 [ 1.499034] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.522696] PM: Adding info for No Bus:input2 [ 1.522837] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2 [ 1.522849] PM: Adding info for No Bus:mouse0 [ 1.522960] PM: Adding info for No Bus:event2 [ 1.548341] PM: Adding info for No Bus:input3 [ 1.548491] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3 [ 1.548516] PM: Adding info for No Bus:mouse1 [ 1.548637] PM: Adding info for No Bus:event3 [ 1.550235] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 1.550241] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 1.550246] hub 1-0:1.0: port 2 not reset yet, waiting 50ms [ 1.610050] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 1.610076] hub 2-0:1.0: state 7 ports 6 chg 004e evt 0000 [ 1.610084] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.670249] ehci_hcd 0000:00:1d.7: port 1 high speed [ 1.670255] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.672615] PM: Adding info for No Bus:card0 [ 1.672734] PM: Adding info for No Bus:input4 [ 1.672834] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 1.672847] PM: Adding info for No Bus:event4 [ 1.672924] PM: Adding info for No Bus:input5 [ 1.672992] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 1.673004] PM: Adding info for No Bus:event5 [ 1.673081] PM: Adding info for No Bus:input6 [ 1.673150] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 1.673161] PM: Adding info for No Bus:event6 [ 1.673234] PM: Adding info for No Bus:pcmC0D1p [ 1.673310] PM: Adding info for No Bus:pcmC0D0p [ 1.673386] PM: Adding info for No Bus:pcmC0D0c [ 1.673463] PM: Adding info for No Bus:hwC0D2 [ 1.673546] PM: Adding info for No Bus:controlC0 [ 1.673695] ALSA device list: [ 1.673697] #0: HDA Intel at 0xfebfc000 irq 29 [ 1.673910] TCP cubic registered [ 1.673912] Initializing XFRM netlink socket [ 1.673923] NET: Registered protocol family 17 [ 1.674574] PM: Adding info for No Bus:cpu_dma_latency [ 1.674647] PM: Adding info for No Bus:network_latency [ 1.674720] PM: Adding info for No Bus:network_throughput [ 1.674785] TuxOnIce 3.0.99.44 (http://tuxonice.net) [ 1.674830] TuxOnIce: Ignoring late initcall, as requested. [ 1.674832] PM: Resume from disk failed. [ 1.674839] registered taskstats version 1 [ 1.675320] rtc_cmos 00:04: setting system clock to 2009-12-24 10:02:18 UTC (1261648938) [ 1.675323] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.675324] EDD information not available. [ 1.675366] Freeing unused kernel memory: 476k freed [ 1.675534] Write protecting the kernel read-only data: 8192k [ 1.675778] Freeing unused kernel memory: 1728k freed [ 1.676495] Freeing unused kernel memory: 296k freed [ 1.732559] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.758284] PM: Adding info for No Bus:vcs2 [ 1.758399] PM: Adding info for No Bus:vcsa2 [ 1.762058] PM: Adding info for No Bus:vcs3 [ 1.762271] PM: Adding info for No Bus:vcsa3 [ 1.768185] PM: Adding info for No Bus:vcs4 [ 1.768348] PM: Adding info for No Bus:vcsa4 [ 1.774332] PM: Adding info for No Bus:vcs5 [ 1.774488] PM: Adding info for No Bus:vcsa5 [ 1.780389] PM: Adding info for No Bus:vcs6 [ 1.780546] PM: Adding info for No Bus:vcsa6 [ 1.792876] ehci_hcd 0000:00:1d.7: port 1 high speed [ 1.792889] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.849137] usb usb3: uevent [ 1.849155] usb 3-0:1.0: uevent [ 1.849187] usb usb4: uevent [ 1.849204] usb 4-0:1.0: uevent [ 1.849236] usb usb1: uevent [ 1.849253] usb 1-0:1.0: uevent [ 1.849272] usb 1-1: uevent [ 1.849289] usb 1-1:1.0: uevent [ 1.849308] usb 1-1:1.1: uevent [ 1.849771] usb usb5: uevent [ 1.849788] usb 5-0:1.0: uevent [ 1.849821] usb usb6: uevent [ 1.849837] usb 6-0:1.0: uevent [ 1.849869] usb usb7: uevent [ 1.849885] usb 7-0:1.0: uevent [ 1.849918] usb usb2: uevent [ 1.849934] usb 2-0:1.0: uevent [ 1.871703] ata_piix 0000:00:1f.1: version 2.13 [ 1.871725] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.871776] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.882073] scsi0 : ata_piix [ 1.882118] PM: Adding info for scsi:host0 [ 1.882143] PM: Adding info for No Bus:host0 [ 1.883386] usb 2-1: default language 0x0409 [ 1.883758] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.883760] usb 2-1: New USB device found, idVendor=066f, idProduct=852e [ 1.883762] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.883764] usb 2-1: Product: 6700 [ 1.883766] usb 2-1: Manufacturer: VERVE [ 1.883767] usb 2-1: SerialNumber: F03A0917E3188B8B [ 1.883817] PM: Adding info for usb:2-1 [ 1.883829] usb 2-1: uevent [ 1.883840] usb 2-1: usb_probe_device [ 1.883843] usb 2-1: configuration #1 chosen from 1 choice [ 1.884131] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.884144] PM: Adding info for usb:2-1:1.0 [ 1.884261] usb 2-1:1.0: uevent [ 1.884276] usb-storage 2-1:1.0: usb_probe_interface [ 1.884281] usb-storage 2-1:1.0: usb_probe_interface - got id [ 1.885551] scsi1 : ata_piix [ 1.885566] PM: Adding info for scsi:host1 [ 1.885591] PM: Adding info for No Bus:host1 [ 1.886146] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.886149] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.890095] ahci 0000:00:1f.2: version 3.0 [ 1.890120] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.890208] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 1.890290] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.890294] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.890299] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.894969] scsi2 : usb-storage 2-1:1.0 [ 1.894988] PM: Adding info for scsi:host2 [ 1.895019] PM: Adding info for No Bus:host2 [ 1.903668] PM: Adding info for No Bus:ep_81 [ 1.903679] PM: Adding info for No Bus:ep_02 [ 1.903687] PM: Adding info for No Bus:ep_83 [ 1.903703] PM: Adding info for No Bus:ep_00 [ 1.903714] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.904223] ata2: port disabled. ignoring. [ 1.919583] scsi3 : ahci [ 1.919607] PM: Adding info for scsi:host3 [ 1.919636] PM: Adding info for No Bus:host3 [ 1.930132] scsi4 : ahci [ 1.930168] PM: Adding info for scsi:host4 [ 1.930203] PM: Adding info for No Bus:host4 [ 1.937771] scsi5 : ahci [ 1.937796] PM: Adding info for scsi:host5 [ 1.937828] PM: Adding info for No Bus:host5 [ 1.938063] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 30 [ 1.938065] ata4: DUMMY [ 1.938068] ata5: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 30 [ 1.960250] ehci_hcd 0000:00:1d.7: port 2 high speed [ 1.960257] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 2.020129] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 2.042569] usb usb4: suspend_rh (auto-stop) [ 2.070619] ata1.00: ATAPI: TEAC DVD+/-RW DVW28SLC, A.06, max UDMA/33 [ 2.080377] ehci_hcd 0000:00:1d.7: port 2 high speed [ 2.080388] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 2.110532] ata1.00: configured for UDMA/33 [ 2.134827] scsi 0:0:0:0: CD-ROM TEAC DVD+-RW DVW28SLC A.06 PQ: 0 ANSI: 5 [ 2.134874] PM: Adding info for scsi:target0:0:0 [ 2.134940] PM: Adding info for scsi:0:0:0:0 [ 2.164052] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 2.164062] Uniform CD-ROM driver Revision: 3.20 [ 2.164127] PM: Adding info for No Bus:sr0 [ 2.164217] PM: Adding info for No Bus:11:0 [ 2.164254] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.164280] PM: Adding info for No Bus:0:0:0:0 [ 2.164365] PM: Adding info for No Bus:sg0 [ 2.164388] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.171643] usb 2-2: default language 0x0409 [ 2.172162] usb 2-2: udev 3, busnum 2, minor = 130 [ 2.172169] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608 [ 2.172174] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.172179] usb 2-2: Product: USB2.0 Hub [ 2.172282] PM: Adding info for usb:2-2 [ 2.172310] usb 2-2: uevent [ 2.172347] usb 2-2: usb_probe_device [ 2.172355] usb 2-2: configuration #1 chosen from 1 choice [ 2.172668] usb 2-2: adding 2-2:1.0 (config #1, interface 0) [ 2.172705] PM: Adding info for usb:2-2:1.0 [ 2.172717] usb 2-2:1.0: uevent [ 2.172750] hub 2-2:1.0: usb_probe_interface [ 2.172756] hub 2-2:1.0: usb_probe_interface - got id [ 2.172761] hub 2-2:1.0: USB hub found [ 2.173150] hub 2-2:1.0: 4 ports detected [ 2.173156] hub 2-2:1.0: standalone hub [ 2.173160] hub 2-2:1.0: individual port power switching [ 2.173165] hub 2-2:1.0: individual port over-current protection [ 2.173169] hub 2-2:1.0: Single TT [ 2.173175] hub 2-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 2.173179] hub 2-2:1.0: Port indicators are supported [ 2.173184] hub 2-2:1.0: power on to power good time: 100ms [ 2.173792] hub 2-2:1.0: local power source is good [ 2.173798] hub 2-2:1.0: enabling power on all ports [ 2.175320] PM: Adding info for No Bus:ep_81 [ 2.175355] PM: Adding info for No Bus:ep_00 [ 2.175371] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 2.175389] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 2.230174] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 2.230223] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 2.270663] hub 2-2:1.0: port 1: status 0101 change 0001 [ 2.290254] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion [ 2.290266] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT [ 2.290277] hub 2-0:1.0: port 6 not reset yet, waiting 50ms [ 2.292699] usb usb5: suspend_rh (auto-stop) [ 2.310183] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.310940] ata3.00: ATA-8: FUJITSU MHY2250BH, 0085000B, max UDMA/100 [ 2.310948] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 2.312031] ata3.00: configured for UDMA/100 [ 2.320210] ata5: SATA link down (SStatus 0 SControl 300) [ 2.330357] scsi 3:0:0:0: Direct-Access ATA FUJITSU MHY2250B 0085 PQ: 0 ANSI: 5 [ 2.330393] PM: Adding info for scsi:target3:0:0 [ 2.330457] PM: Adding info for scsi:3:0:0:0 [ 2.330531] PM: Adding info for No Bus:3:0:0:0 [ 2.330583] PM: Adding info for No Bus:3:0:0:0 [ 2.330657] PM: Adding info for No Bus:sg1 [ 2.330681] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 2.331537] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.331663] sd 3:0:0:0: [sda] Write Protect is off [ 2.331669] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.331722] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.331779] PM: Adding info for No Bus:sda [ 2.332029] sda: [ 2.350177] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 2.350222] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 2.350238] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00 [ 2.350251] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 2.361073] sda1 sda2 sda3 < [ 2.370221] usb 2-2: link qh256-0001/ffff88011c2bc940 start 1 [1/0 us] [ 2.390676] sda5 sda6 > sda4 [ 2.398456] PM: Adding info for No Bus:sda1 [ 2.398492] PM: Adding info for No Bus:sda2 [ 2.398531] PM: Adding info for No Bus:sda3 [ 2.398565] PM: Adding info for No Bus:sda4 [ 2.398596] PM: Adding info for No Bus:sda5 [ 2.398629] PM: Adding info for No Bus:sda6 [ 2.398875] PM: Adding info for No Bus:8:0 [ 2.400386] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.520144] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 2.640140] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.782654] usb 3-2: ep0 maxpacket = 8 [ 2.803073] usb 3-2: default language 0x0409 [ 2.822061] usb 3-2: udev 2, busnum 3, minor = 257 [ 2.822069] usb 3-2: New USB device found, idVendor=0483, idProduct=2016 [ 2.822075] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.822081] usb 3-2: Product: Biometric Coprocessor [ 2.822085] usb 3-2: Manufacturer: STMicroelectronics [ 2.822191] PM: Adding info for usb:3-2 [ 2.822221] usb 3-2: uevent [ 2.822258] usb 3-2: usb_probe_device [ 2.822266] usb 3-2: configuration #1 chosen from 1 choice [ 2.823980] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 2.824020] PM: Adding info for usb:3-2:1.0 [ 2.824033] usb 3-2:1.0: uevent [ 2.824086] usbserial_generic 3-2:1.0: usb_probe_interface [ 2.824092] usbserial_generic 3-2:1.0: usb_probe_interface - got id [ 2.824150] PM: Adding info for No Bus:ep_81 [ 2.824174] PM: Adding info for No Bus:ep_02 [ 2.824198] PM: Adding info for No Bus:ep_83 [ 2.824225] PM: Adding info for No Bus:ep_00 [ 2.824236] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.824246] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 2.824264] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 [ 2.824278] hub 6-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 2.897619] Scanning swap devices for TuxOnIce signature... [ 2.951580] - Trying 8:5. [ 2.953631] TuxOnIce scan: No image found. [ 2.954007] TuxOnIce: No image found. [ 2.982697] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 3.102703] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 3.296895] usb 6-1: skipped 1 descriptor after interface [ 3.296906] usb 6-1: udev 2, busnum 6, minor = 641 [ 3.296912] usb 6-1: New USB device found, idVendor=04d9, idProduct=048e [ 3.296917] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.297022] PM: Adding info for usb:6-1 [ 3.297051] usb 6-1: uevent [ 3.297089] usb 6-1: usb_probe_device [ 3.297097] usb 6-1: configuration #1 chosen from 1 choice [ 3.301902] usb 6-1: adding 6-1:1.0 (config #1, interface 0) [ 3.301949] PM: Adding info for usb:6-1:1.0 [ 3.301963] usb 6-1:1.0: uevent [ 3.302020] usbserial_generic 6-1:1.0: usb_probe_interface [ 3.302027] usbserial_generic 6-1:1.0: usb_probe_interface - got id [ 3.302092] PM: Adding info for No Bus:ep_81 [ 3.302128] PM: Adding info for No Bus:ep_00 [ 3.302139] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 3.302158] uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00 [ 3.302174] hub 7-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 3.313511] usbcore: registered new interface driver hiddev [ 3.313526] usbhid 6-1:1.0: usb_probe_interface [ 3.313529] usbhid 6-1:1.0: usb_probe_interface - got id [ 3.313554] PM: Adding info for hid:0003:04D9:048E.0001 [ 3.399265] PM: Adding info for No Bus:input7 [ 3.399347] input: HID 04d9:048e as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7 [ 3.399375] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 3.399438] PM: Adding info for No Bus:mouse2 [ 3.399490] PM: Adding info for No Bus:event7 [ 3.399513] generic-usb 0003:04D9:048E.0001: input: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.1-1/input0 [ 3.399576] usbcore: registered new interface driver usbhid [ 3.399581] usbhid: USB HID core driver [ 3.462675] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 3.582590] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 3.722663] usb 7-2: ep0 maxpacket = 8 [ 3.749154] usb 7-2: default language 0x0409 [ 3.763136] usb 7-2: udev 2, busnum 7, minor = 769 [ 3.763143] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 3.763149] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.763154] usb 7-2: Product: BCM2045B2 [ 3.763159] usb 7-2: Manufacturer: Broadcom [ 3.763265] PM: Adding info for usb:7-2 [ 3.763294] usb 7-2: uevent [ 3.763332] usb 7-2: usb_probe_device [ 3.763340] usb 7-2: configuration #1 chosen from 1 choice [ 3.766077] usb 7-2: adding 7-2:1.0 (config #1, interface 0) [ 3.766117] PM: Adding info for usb:7-2:1.0 [ 3.766129] usb 7-2:1.0: uevent [ 3.766163] hub 7-2:1.0: usb_probe_interface [ 3.766169] hub 7-2:1.0: usb_probe_interface - got id [ 3.766174] hub 7-2:1.0: USB hub found [ 3.768049] hub 7-2:1.0: 3 ports detected [ 3.768055] hub 7-2:1.0: compound device; port removable status: FFF [ 3.768060] hub 7-2:1.0: ganged power switching [ 3.768064] hub 7-2:1.0: global over-current protection [ 3.768069] hub 7-2:1.0: power on to power good time: 100ms [ 3.769072] hub 7-2:1.0: hub controller current requirement: 100mA [ 3.769078] hub 7-2:1.0: 100mA bus power budget for each child [ 3.770145] hub 7-2:1.0: local power source is good [ 3.770153] hub 7-2:1.0: no over-current condition exists [ 3.770159] hub 7-2:1.0: enabling power on all ports [ 3.773185] PM: Adding info for No Bus:ep_81 [ 3.773218] PM: Adding info for No Bus:ep_00 [ 3.773229] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004 [ 3.773247] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 3.773261] hub 2-2:1.0: state 7 ports 4 chg 0002 evt 0000 [ 3.773661] hub 2-2:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 3.860537] usb 2-2.1: new full speed USB device using ehci_hcd and address 6 [ 3.874147] hub 7-2:1.0: port 1: status 0101 change 0001 [ 3.876057] hub 7-2:1.0: port 2: status 0101 change 0001 [ 3.878152] hub 7-2:1.0: port 3: status 0101 change 0001 [ 3.960159] usb 2-2.1: ep0 maxpacket = 8 [ 3.962267] usb 2-2.1: default language 0x0409 [ 3.963897] usb 2-2.1: udev 6, busnum 2, minor = 133 [ 3.963904] usb 2-2.1: New USB device found, idVendor=04e8, idProduct=3419 [ 3.963910] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.963916] usb 2-2.1: Product: SCX-4x21 Series [ 3.963920] usb 2-2.1: Manufacturer: Samsung [ 3.963924] usb 2-2.1: SerialNumber: 8P54BAIQ223171Y. [ 3.964028] PM: Adding info for usb:2-2.1 [ 3.964059] usb 2-2.1: uevent [ 3.964104] usb 2-2.1: usb_probe_device [ 3.964112] usb 2-2.1: configuration #1 chosen from 1 choice [ 3.964325] usb 2-2.1: adding 2-2.1:1.0 (config #1, interface 0) [ 3.964366] PM: Adding info for usb:2-2.1:1.0 [ 3.964381] usb 2-2.1:1.0: uevent [ 3.964434] usbserial_generic 2-2.1:1.0: usb_probe_interface [ 3.964441] usbserial_generic 2-2.1:1.0: usb_probe_interface - got id [ 3.964518] PM: Adding info for No Bus:ep_04 [ 3.964541] PM: Adding info for No Bus:ep_82 [ 3.964548] usb 2-2.1: adding 2-2.1:1.1 (config #1, interface 1) [ 3.964586] PM: Adding info for usb:2-2.1:1.1 [ 3.964599] usb 2-2.1:1.1: uevent [ 3.964629] usblp 2-2.1:1.1: usb_probe_interface [ 3.964634] usblp 2-2.1:1.1: usb_probe_interface - got id [ 3.964811] PM: Adding info for No Bus:ep_03 [ 3.964834] PM: Adding info for No Bus:ep_81 [ 3.965529] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 3.965628] PM: Adding info for No Bus:lp0 [ 3.965653] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3419 [ 3.965691] PM: Adding info for No Bus:ep_00 [ 3.965702] hub 2-2:1.0: state 7 ports 4 chg 0000 evt 0002 [ 3.972738] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 3.972787] hub 7-2:1.0: state 7 ports 3 chg 000e evt 0000 [ 3.974052] hub 7-2:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 4.050215] hub 4-0:1.0: hub_suspend [ 4.050232] usb usb4: bus auto-suspend [ 4.050238] usb usb4: suspend_rh [ 4.062137] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 4.181095] usb 7-2.1: skipped 1 descriptor after interface [ 4.184154] usb 7-2.1: default language 0x0409 [ 4.190166] usb 7-2.1: udev 3, busnum 7, minor = 770 [ 4.190173] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 4.190179] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.190184] usb 7-2.1: Product: BCM2045 [ 4.190189] usb 7-2.1: Manufacturer: Broadcom Corp [ 4.190291] PM: Adding info for usb:7-2.1 [ 4.190322] usb 7-2.1: uevent [ 4.190365] usb 7-2.1: usb_probe_device [ 4.190373] usb 7-2.1: configuration #1 chosen from 1 choice [ 4.192068] usb 7-2.1: adding 7-2.1:1.0 (config #1, interface 0) [ 4.192112] PM: Adding info for usb:7-2.1:1.0 [ 4.192126] usb 7-2.1:1.0: uevent [ 4.192179] usbserial_generic 7-2.1:1.0: usb_probe_interface [ 4.192185] usbserial_generic 7-2.1:1.0: usb_probe_interface - got id [ 4.192246] PM: Adding info for No Bus:ep_81 [ 4.192274] PM: Adding info for No Bus:ep_82 [ 4.192295] PM: Adding info for No Bus:ep_02 [ 4.192301] usb 7-2.1: adding 7-2.1:1.1 (config #1, interface 1) [ 4.192325] PM: Adding info for usb:7-2.1:1.1 [ 4.192335] usb 7-2.1:1.1: uevent [ 4.192374] usbserial_generic 7-2.1:1.1: usb_probe_interface [ 4.192379] usbserial_generic 7-2.1:1.1: usb_probe_interface - got id [ 4.192429] PM: Adding info for No Bus:ep_83 [ 4.192452] PM: Adding info for No Bus:ep_03 [ 4.192458] usb 7-2.1: adding 7-2.1:1.2 (config #1, interface 2) [ 4.192484] PM: Adding info for usb:7-2.1:1.2 [ 4.192493] usb 7-2.1:1.2: uevent [ 4.192555] usbserial_generic 7-2.1:1.2: usb_probe_interface [ 4.192560] usbserial_generic 7-2.1:1.2: usb_probe_interface - got id [ 4.192614] PM: Adding info for No Bus:ep_84 [ 4.192635] PM: Adding info for No Bus:ep_04 [ 4.192640] usb 7-2.1: adding 7-2.1:1.3 (config #1, interface 3) [ 4.192668] PM: Adding info for usb:7-2.1:1.3 [ 4.192677] usb 7-2.1:1.3: uevent [ 4.192713] usbserial_generic 7-2.1:1.3: usb_probe_interface [ 4.192718] usbserial_generic 7-2.1:1.3: usb_probe_interface - got id [ 4.192773] PM: Adding info for No Bus:ep_00 [ 4.192780] hub 7-2:1.0: 400mA power budget left [ 4.194021] hub 7-2:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 4.272157] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 4.370150] usb 7-2.2: ep0 maxpacket = 8 [ 4.396158] usb 7-2.2: skipped 1 descriptor after interface [ 4.399151] usb 7-2.2: default language 0x0409 [ 4.407155] usb 7-2.2: udev 4, busnum 7, minor = 771 [ 4.407162] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 4.407168] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 4.407173] usb 7-2.2: Manufacturer: Broadcom Corp [ 4.407276] PM: Adding info for usb:7-2.2 [ 4.407307] usb 7-2.2: uevent [ 4.407346] usb 7-2.2: usb_probe_device [ 4.407354] usb 7-2.2: configuration #1 chosen from 1 choice [ 4.409063] usb 7-2.2: adding 7-2.2:1.0 (config #1, interface 0) [ 4.409109] PM: Adding info for usb:7-2.2:1.0 [ 4.409124] usb 7-2.2:1.0: uevent [ 4.409178] usbserial_generic 7-2.2:1.0: usb_probe_interface [ 4.409185] usbserial_generic 7-2.2:1.0: usb_probe_interface - got id [ 4.409228] usbhid 7-2.2:1.0: usb_probe_interface [ 4.409232] usbhid 7-2.2:1.0: usb_probe_interface - got id [ 4.409277] PM: Adding info for hid:0003:0A5C:4502.0002 [ 4.413645] PM: Adding info for No Bus:input8 [ 4.413715] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 [ 4.413738] uhci_hcd 0000:00:1d.2: reserve dev 4 ep81-INT, period 8, phase 4, 17 us [ 4.413792] PM: Adding info for No Bus:event8 [ 4.413817] generic-usb 0003:0A5C:4502.0002: input: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 4.413874] PM: Adding info for No Bus:ep_81 [ 4.413906] PM: Adding info for No Bus:ep_00 [ 4.413914] hub 7-2:1.0: 400mA power budget left [ 4.415045] hub 7-2:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 4.492144] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 4.590071] usb 7-2.3: ep0 maxpacket = 8 [ 4.615139] usb 7-2.3: skipped 1 descriptor after interface [ 4.618132] usb 7-2.3: default language 0x0409 [ 4.626155] usb 7-2.3: udev 5, busnum 7, minor = 772 [ 4.626163] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 4.626168] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 4.626174] usb 7-2.3: Manufacturer: Broadcom Corp [ 4.626284] PM: Adding info for usb:7-2.3 [ 4.626314] usb 7-2.3: uevent [ 4.626353] usb 7-2.3: usb_probe_device [ 4.626361] usb 7-2.3: configuration #1 chosen from 1 choice [ 4.628067] usb 7-2.3: adding 7-2.3:1.0 (config #1, interface 0) [ 4.628113] PM: Adding info for usb:7-2.3:1.0 [ 4.628128] usb 7-2.3:1.0: uevent [ 4.628181] usbserial_generic 7-2.3:1.0: usb_probe_interface [ 4.628188] usbserial_generic 7-2.3:1.0: usb_probe_interface - got id [ 4.628234] usbhid 7-2.3:1.0: usb_probe_interface [ 4.628239] usbhid 7-2.3:1.0: usb_probe_interface - got id [ 4.628282] PM: Adding info for hid:0003:0A5C:4503.0003 [ 4.634047] PM: Adding info for No Bus:input9 [ 4.634115] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 [ 4.634181] PM: Adding info for No Bus:mouse3 [ 4.634229] PM: Adding info for No Bus:event9 [ 4.634253] generic-usb 0003:0A5C:4503.0003: input: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 4.634316] PM: Adding info for No Bus:ep_81 [ 4.634347] PM: Adding info for No Bus:ep_00 [ 4.634356] hub 7-2:1.0: 400mA power budget left [ 4.634364] hub 7-2:1.0: state 7 ports 3 chg 0000 evt 0008 [ 5.012665] hub 5-0:1.0: hub_suspend [ 5.012683] usb usb5: bus auto-suspend [ 5.012689] usb usb5: suspend_rh [ 6.903224] scsi 2:0:0:0: Direct-Access VERVE 6700 0100 PQ: 0 ANSI: 4 [ 6.903750] PM: Adding info for scsi:target2:0:0 [ 6.904197] PM: Adding info for scsi:2:0:0:0 [ 6.904268] PM: Adding info for No Bus:2:0:0:0 [ 6.904349] PM: Adding info for No Bus:2:0:0:0 [ 6.904430] PM: Adding info for No Bus:sg2 [ 6.904456] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.905160] sd 2:0:0:0: [sdb] 978560 2048-byte logical blocks: (2.00 GB/1.86 GiB) [ 6.905913] sd 2:0:0:0: [sdb] Write Protect is off [ 6.905920] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00 [ 6.905925] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.906602] PM: Adding info for No Bus:sdb [ 6.907907] sd 2:0:0:0: [sdb] 978560 2048-byte logical blocks: (2.00 GB/1.86 GiB) [ 6.909100] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.909681] sdb: sdb1 [ 6.910740] PM: Adding info for No Bus:sdb1 [ 6.911619] PM: Adding info for No Bus:8:16 [ 6.912928] sd 2:0:0:0: [sdb] 978560 2048-byte logical blocks: (2.00 GB/1.86 GiB) [ 6.913424] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.913998] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 6.916335] usb 2-1:1.0: uevent [ 6.916620] usb 2-1: uevent [ 7.096524] usb 2-1:1.0: uevent [ 7.096797] usb 2-1: uevent [ 8.023930] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 8.023945] PM: Marking nosave pages: 00000000dfe72000 - 0000000100000000 [ 8.025053] PM: Basic memory bitmaps created [ 8.062147] PM: Basic memory bitmaps freed [ 8.106626] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 8.106796] kjournald starting. Commit interval 5 seconds [ 14.051026] udev: starting version 141 [ 14.078746] usb usb3: uevent [ 14.078860] usb 3-0:1.0: uevent [ 14.078989] usb 3-2: uevent [ 14.079098] usb 3-2:1.0: uevent [ 14.079390] usb usb4: uevent [ 14.079521] usb 4-0:1.0: uevent [ 14.079951] usb usb1: uevent [ 14.080021] usb 1-0:1.0: uevent [ 14.080021] usb 1-1: uevent [ 14.080353] usb 1-1:1.0: uevent [ 14.080450] usb 1-1:1.1: uevent [ 14.087063] usb usb5: uevent [ 14.087182] usb 5-0:1.0: uevent [ 14.087506] usb usb6: uevent [ 14.087651] usb 6-0:1.0: uevent [ 14.087764] usb 6-1: uevent [ 14.087850] usb 6-1:1.0: uevent [ 14.088549] usb usb7: uevent [ 14.088675] usb 7-0:1.0: uevent [ 14.088769] usb 7-2: uevent [ 14.088860] usb 7-2.1: uevent [ 14.088954] usb 7-2.1:1.0: uevent [ 14.089098] usb 7-2.1:1.1: uevent [ 14.089188] usb 7-2.1:1.2: uevent [ 14.089282] usb 7-2.1:1.3: uevent [ 14.089373] usb 7-2.2: uevent [ 14.089470] usb 7-2.2:1.0: uevent [ 14.089912] usb 7-2.3: uevent [ 14.093919] usb 7-2.3:1.0: uevent [ 14.094666] usb 7-2:1.0: uevent [ 14.095192] usb usb2: uevent [ 14.095340] usb 2-0:1.0: uevent [ 14.095462] usb 2-1: uevent [ 14.095584] usb 2-1:1.0: uevent [ 14.096736] usb 2-2: uevent [ 14.096866] usb 2-2.1: uevent [ 14.096996] usb 2-2.1:1.0: uevent [ 14.097122] usb 2-2.1:1.1: uevent [ 14.097372] usb 2-2:1.0: uevent [ 14.180489] usb 2-1:1.0: uevent [ 14.180598] usb 2-1: uevent [ 14.408337] usb 6-1:1.0: uevent [ 14.408440] usb 6-1: uevent [ 14.415611] usb 7-2.2:1.0: uevent [ 14.415722] usb 7-2.2: uevent [ 14.418059] usb 7-2.3:1.0: uevent [ 14.418163] usb 7-2.3: uevent [ 14.419328] usb 6-1:1.0: uevent [ 14.419421] usb 6-1: uevent [ 14.420139] usb 7-2.3:1.0: uevent [ 14.420239] usb 7-2.3: uevent [ 15.050936] Bluetooth: Core ver 2.15 [ 15.051163] NET: Registered protocol family 31 [ 15.051165] Bluetooth: HCI device and connection manager initialized [ 15.051168] Bluetooth: HCI socket layer initialized [ 15.752046] PM: Adding info for platform:regulatory.0 [ 15.752243] cfg80211: Using static regulatory domain info [ 15.752245] cfg80211: Regulatory domain: 00 [ 15.752247] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.752249] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 15.752251] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 15.752254] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 15.752256] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 15.752258] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 15.752266] cfg80211: Calling CRDA to update world regulatory domain [ 15.960122] cfg80211: World regulatory domain updated: [ 15.960133] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.960140] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.960147] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.960153] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.960159] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.960165] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.011395] PM: Adding info for platform:dell-laptop [ 16.038555] PM: Adding info for No Bus:input10 [ 16.039119] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 16.039197] PM: Adding info for No Bus:event10 [ 16.162163] PM: Adding info for No Bus:BAT0 [ 16.167476] ACPI: Battery Slot [BAT0] (battery present) [ 16.176943] PM: Adding info for No Bus:input11 [ 16.176963] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11 [ 16.176998] PM: Adding info for No Bus:event11 [ 16.321981] ACPI: Lid Switch [LID] [ 16.322024] PM: Adding info for No Bus:input12 [ 16.322136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 [ 16.322168] PM: Adding info for No Bus:event12 [ 16.322253] ACPI: Power Button [PBTN] [ 16.322284] PM: Adding info for No Bus:input13 [ 16.322371] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13 [ 16.322386] PM: Adding info for No Bus:event13 [ 16.322460] ACPI: Sleep Button [SBTN] [ 16.347726] PM: Adding info for No Bus:AC [ 16.347753] ACPI: AC Adapter [AC] (on-line) [ 16.391219] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 16.391282] btusb 7-2.1:1.0: usb_probe_interface [ 16.391289] btusb 7-2.1:1.0: usb_probe_interface - got id [ 16.391354] PM: Adding info for No Bus:hci0 [ 16.393252] PM: Adding info for No Bus:rfkill0 [ 16.393918] btusb 7-2.1:1.2: usb_probe_interface [ 16.393925] btusb 7-2.1:1.2: usb_probe_interface - got id [ 16.393942] btusb 7-2.1:1.3: usb_probe_interface [ 16.393946] btusb 7-2.1:1.3: usb_probe_interface - got id [ 16.394368] usbcore: registered new interface driver btusb [ 16.457851] PM: Adding info for No Bus:acpi_video0 [ 16.458028] PM: Adding info for No Bus:cooling_device2 [ 16.458212] acpi device:30: registered as cooling_device2 [ 16.458225] PM: Adding info for No Bus:acpi_video0 [ 16.458949] PM: Adding info for No Bus:input14 [ 16.459113] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input14 [ 16.459151] PM: Adding info for No Bus:event14 [ 16.459293] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 16.483062] Linux video capture interface: v2.00 [ 16.716444] uvcvideo 1-1:1.0: usb_probe_interface [ 16.716454] uvcvideo 1-1:1.0: usb_probe_interface - got id [ 16.716495] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 16.716895] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 16.717463] PM: Adding info for No Bus:video0 [ 16.717704] PM: Adding info for No Bus:input15 [ 16.717882] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input15 [ 16.717927] PM: Adding info for No Bus:event15 [ 16.718428] usbcore: registered new interface driver uvcvideo [ 16.718433] USB Video Class driver (v0.1.0) [ 16.723603] usb 1-1:1.0: uevent [ 16.723868] usb 1-1: uevent [ 16.728634] usb 1-1:1.0: uevent [ 16.728895] usb 1-1: uevent [ 16.921995] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-rc1-ks [ 16.921998] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 16.922120] iwl3945 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 16.922135] iwl3945 0000:0b:00.0: setting latency timer to 64 [ 16.962679] iwl3945 0000:0b:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 16.962682] iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 16.962826] iwl3945 0000:0b:00.0: irq 31 for MSI/MSI-X [ 16.962992] PM: Adding info for No Bus:phy0 [ 16.963019] PM: Adding info for No Bus:rfkill1 [ 17.028315] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 17.028445] PM: Adding info for No Bus:wlan0 [ 17.371986] Adding 3068372k swap on /dev/sda5. Priority:-1 extents:1 across:3068372k [ 17.476691] EXT3-fs (sda2): using internal journal [ 18.768863] kjournald starting. Commit interval 5 seconds [ 18.769408] EXT3-fs (sda4): using internal journal [ 18.769424] EXT3-fs (sda4): mounted filesystem with writeback data mode [ 18.788553] kjournald starting. Commit interval 5 seconds [ 18.789078] EXT3-fs (sda6): using internal journal [ 18.789094] EXT3-fs (sda6): mounted filesystem with writeback data mode [ 27.171116] PM: Adding info for No Bus:vcs63 [ 27.171173] PM: Adding info for No Bus:vcsa63 [ 29.008441] usbcore: deregistering interface driver uvcvideo [ 29.008475] PM: Removing info for No Bus:video0 [ 29.030195] PM: Removing info for No Bus:event15 [ 29.060189] PM: Removing info for No Bus:input15 [ 29.128810] TuxOnIce: No image found. [ 29.172071] TuxOnIce 3.0.99.44, with support for usm, compression, block i/o, swap storage, file storage, userui. [ 29.172365] Initiating a hibernation cycle. [ 29.281874] Stopping fuse filesystems. [ 29.281880] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 29.300024] Stopping normal filesystems. [ 29.462396] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 29.640919] Restarting normal filesystems. [ 29.646544] Stopping fuse filesystems. [ 29.646547] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 29.646553] Stopping normal filesystems. [ 29.821549] Freezing remaining freezable tasks ... [ 29.838831] n is a3009. Action flags being changed from a3008 to a3009.(elapsed 0.02 seconds) done. [ 29.994838] ...20%...40%...60%...80%...100% [ 30.927625] Waited for i/o due to synchronous I/O 8 times. [ 30.930735] Suspending console(s) (use no_console_suspend to debug) [ 30.930840] pci 0000:00:00.0: preparing freeze [ 30.930845] pcieport 0000:00:01.0: preparing freeze [ 30.930851] uhci_hcd 0000:00:1a.0: preparing freeze [ 30.930856] uhci_hcd 0000:00:1a.1: preparing freeze [ 30.930861] ehci_hcd 0000:00:1a.7: preparing freeze [ 30.930866] HDA Intel 0000:00:1b.0: preparing freeze [ 30.930870] pcieport 0000:00:1c.0: preparing freeze [ 30.930875] pcieport 0000:00:1c.1: preparing freeze [ 30.930879] pcieport 0000:00:1c.4: preparing freeze [ 30.930884] uhci_hcd 0000:00:1d.0: preparing freeze [ 30.930888] uhci_hcd 0000:00:1d.1: preparing freeze [ 30.930893] uhci_hcd 0000:00:1d.2: preparing freeze [ 30.930897] ehci_hcd 0000:00:1d.7: preparing freeze [ 30.930902] pci 0000:00:1e.0: preparing freeze [ 30.930907] pci 0000:00:1f.0: preparing freeze [ 30.930912] ata_piix 0000:00:1f.1: preparing freeze [ 30.930917] ahci 0000:00:1f.2: preparing freeze [ 30.930922] pci 0000:00:1f.3: preparing freeze [ 30.930926] pci 0000:01:00.0: preparing freeze [ 30.930932] sky2 0000:09:00.0: preparing freeze [ 30.930938] iwl3945 0000:0b:00.0: preparing freeze [ 30.930945] pci 0000:03:09.0: preparing freeze [ 30.930950] sdhci-pci 0000:03:09.1: preparing freeze [ 30.930954] pci 0000:03:09.2: preparing freeze [ 30.930959] pci 0000:03:09.3: preparing freeze [ 30.930997] pcspkr pcspkr: preparing freeze [ 30.931016] vesafb vesafb.0: preparing freeze [ 30.931086] serial8250 serial8250: preparing freeze [ 30.931096] usb usb1: preparing type freeze [ 30.931104] usb usb2: preparing type freeze [ 30.931111] usb usb3: preparing type freeze [ 30.931118] usb usb4: preparing type freeze [ 30.931125] usb usb5: preparing type freeze [ 30.931132] usb usb6: preparing type freeze [ 30.931140] usb usb7: preparing type freeze [ 30.931147] i8042 i8042: preparing freeze [ 30.931159] coretemp coretemp.0: preparing freeze [ 30.931165] coretemp coretemp.1: preparing freeze [ 30.931170] iTCO_wdt iTCO_wdt: preparing freeze [ 30.931178] platform dell_rbu: preparing freeze [ 30.931183] dcdbas dcdbas: preparing freeze [ 30.931192] usb 1-1: preparing type freeze [ 30.931232] usb 2-1: preparing type freeze [ 30.931257] usb 2-2: preparing type freeze [ 30.931276] usb 3-2: preparing type freeze [ 30.931284] usb 6-1: preparing type freeze [ 30.931296] usb 7-2: preparing type freeze [ 30.931303] usb 2-2.1: preparing type freeze [ 30.931315] usb 7-2.1: preparing type freeze [ 30.931330] usb 7-2.2: preparing type freeze [ 30.931341] usb 7-2.3: preparing type freeze [ 30.931361] platform regulatory.0: preparing freeze [ 30.931366] dell-laptop dell-laptop: preparing freeze [ 30.931399] rfkill rfkill1: legacy class freeze [ 30.931404] ieee80211 phy0: legacy class freeze [ 30.970172] input input14: type freeze [ 30.970182] backlight acpi_video0: legacy class freeze [ 30.970188] rfkill rfkill0: legacy class freeze [ 30.970198] input input13: type freeze [ 30.970203] input input12: type freeze [ 30.970209] input input11: type freeze [ 30.970216] input input10: type freeze [ 30.970221] dell-laptop dell-laptop: freeze [ 30.970227] platform regulatory.0: freeze [ 30.970239] sd 2:0:0:0: legacy freeze [ 30.970250] scsi target2:0:0: legacy freeze [ 30.970259] input input9: type freeze [ 30.970267] usb 7-2.3: type freeze [ 30.970283] input input8: type freeze [ 30.970290] usb 7-2.2: type freeze [ 30.972087] uhci_hcd 0000:00:1d.2: release dev 4 ep81-INT, period 8, phase 4, 17 us [ 30.972137] usb 7-2.1: type freeze [ 30.972159] usb 2-2.1: type freeze [ 30.972170] usb 7-2: type freeze [ 30.972176] hub 7-2:1.0: hub_suspend [ 30.973085] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 128, phase 0, 12 us [ 30.973130] input input7: type freeze [ 30.973140] usb 6-1: type freeze [ 30.974819] uhci_hcd 0000:00:1d.1: release dev 2 ep81-INT, period 8, phase 4, 118 us [ 30.974865] usb 3-2: type freeze [ 30.974886] sd 3:0:0:0: legacy freeze [ 30.974894] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 30.975714] scsi target3:0:0: legacy freeze [ 30.975725] usb 2-2: type freeze [ 30.975731] hub 2-2:1.0: hub_suspend [ 30.975744] usb 2-2: unlink qh256-0001/ffff88011c2bc940 start 1 [1/0 us] [ 30.975827] sr 0:0:0:0: legacy freeze [ 30.975833] scsi target0:0:0: legacy freeze [ 30.975839] scsi host5: legacy freeze [ 30.975844] scsi host4: legacy freeze [ 30.975850] scsi host3: legacy freeze [ 30.975858] scsi host2: legacy freeze [ 30.975863] scsi host1: legacy freeze [ 30.975869] usb 2-1: type freeze [ 30.975878] scsi host0: legacy freeze [ 30.975902] input input6: type freeze [ 30.975908] input input5: type freeze [ 30.975914] input input4: type freeze [ 30.975922] input input3: type freeze [ 30.975929] input input2: type freeze [ 30.975937] usb 1-1: type freeze [ 30.975946] input input1: type freeze [ 30.975953] dcdbas dcdbas: freeze [ 30.975958] platform dell_rbu: freeze [ 30.975964] leds mmc0::: legacy class freeze [ 30.975971] iTCO_wdt iTCO_wdt: freeze [ 30.975977] coretemp coretemp.1: freeze [ 30.975983] coretemp coretemp.0: freeze [ 30.975988] rtc rtc0: legacy class freeze [ 30.976028] input input0: type freeze [ 30.976033] psmouse serio1: freeze [ 30.976038] atkbd serio0: freeze [ 30.976043] i8042 i8042: freeze [ 30.976051] usb usb7: type freeze [ 30.976055] hub 7-0:1.0: hub_suspend [ 30.976063] usb usb7: bus suspend [ 30.976067] usb usb7: suspend_rh [ 30.976095] usb usb6: type freeze [ 30.976100] hub 6-0:1.0: hub_suspend [ 30.976106] usb usb6: bus suspend [ 30.976109] usb usb6: suspend_rh [ 30.976134] usb usb5: type freeze [ 30.976142] usb usb4: type freeze [ 30.976149] usb usb3: type freeze [ 30.976154] hub 3-0:1.0: hub_suspend [ 30.976160] usb usb3: bus suspend [ 30.976163] usb usb3: suspend_rh [ 30.976189] usb usb2: type freeze [ 30.976193] hub 2-0:1.0: hub_suspend [ 30.976199] usb usb2: bus suspend [ 30.976203] ehci_hcd 0000:00:1d.7: suspend root hub [ 30.976393] usb usb1: type freeze [ 30.976397] hub 1-0:1.0: hub_suspend [ 30.976403] usb usb1: bus suspend [ 30.976406] ehci_hcd 0000:00:1a.7: suspend root hub [ 30.976590] serial8250 serial8250: freeze [ 30.976663] vesafb vesafb.0: freeze [ 30.976682] pcspkr pcspkr: freeze [ 30.976700] system 00:0c: legacy freeze [ 30.976716] system 00:0b: legacy freeze [ 30.976724] system 00:0a: legacy freeze [ 30.976731] system 00:09: legacy freeze [ 30.976738] pnp 00:08: legacy freeze [ 30.976743] pnp 00:07: legacy freeze [ 30.976747] system 00:06: legacy freeze [ 30.976755] pnp 00:05: legacy freeze [ 30.976759] rtc_cmos 00:04: legacy freeze [ 30.976772] i8042 kbd 00:03: legacy freeze [ 30.976779] i8042 aux 00:02: legacy freeze [ 30.976787] system 00:01: legacy freeze [ 30.976794] pnp 00:00: legacy freeze [ 30.976809] pci 0000:03:09.3: freeze [ 30.976815] pci 0000:03:09.2: freeze [ 30.976820] sdhci-pci 0000:03:09.1: freeze [ 30.976917] sdhci-pci 0000:03:09.1: PCI INT B disabled [ 30.990284] pci 0000:03:09.0: freeze [ 30.990293] iwl3945 0000:0b:00.0: freeze [ 30.990511] iwl3945 0000:0b:00.0: Master Disable Timed Out, 100 usec [ 31.010300] sky2 0000:09:00.0: freeze [ 31.030289] pci 0000:01:00.0: freeze [ 31.030296] pci 0000:00:1f.3: freeze [ 31.030301] ahci 0000:00:1f.2: freeze [ 31.070325] ata_piix 0000:00:1f.1: freeze [ 31.070429] ata2: port disabled. ignoring. [ 31.070501] ata_piix 0000:00:1f.1: PCI INT A disabled [ 31.070507] pci 0000:00:1f.0: freeze [ 31.070512] pci 0000:00:1e.0: freeze [ 31.070517] ehci_hcd 0000:00:1d.7: freeze [ 31.070523] uhci_hcd 0000:00:1d.2: freeze [ 31.070528] uhci_hcd 0000:00:1d.1: freeze [ 31.070533] uhci_hcd 0000:00:1d.0: freeze [ 31.070537] pcieport 0000:00:1c.4: freeze [ 31.070546] pcieport 0000:00:1c.1: freeze [ 31.070554] pcieport 0000:00:1c.0: freeze [ 31.070561] HDA Intel 0000:00:1b.0: freeze [ 31.620252] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 31.640178] ehci_hcd 0000:00:1a.7: freeze [ 31.640187] uhci_hcd 0000:00:1a.1: freeze [ 31.640192] uhci_hcd 0000:00:1a.0: freeze [ 31.640198] pcieport 0000:00:01.0: freeze [ 31.640206] pci 0000:00:00.0: freeze [ 31.640214] thermal LNXTHERM:01: legacy freeze [ 31.640219] acpi LNXTHERM:00: legacy freeze [ 31.640224] wmi pnp0c14:00: legacy freeze [ 31.640229] acpi PNP0C32:00: legacy freeze [ 31.640234] battery PNP0C0A:00: legacy freeze [ 31.640240] ac ACPI0003:00: legacy freeze [ 31.640245] button PNP0C0E:00: legacy freeze [ 31.640250] button PNP0C0C:00: legacy freeze [ 31.640254] button PNP0C0D:00: legacy freeze [ 31.640259] acpi PNP0C01:03: legacy freeze [ 31.640264] pci_link PNP0C0F:07: legacy freeze [ 31.640268] pci_link PNP0C0F:06: legacy freeze [ 31.640273] pci_link PNP0C0F:05: legacy freeze [ 31.640278] pci_link PNP0C0F:04: legacy freeze [ 31.640283] pci_link PNP0C0F:03: legacy freeze [ 31.640287] pci_link PNP0C0F:02: legacy freeze [ 31.640292] pci_link PNP0C0F:01: legacy freeze [ 31.640297] pci_link PNP0C0F:00: legacy freeze [ 31.640301] acpi device:3d: legacy freeze [ 31.640306] acpi device:3c: legacy freeze [ 31.640310] acpi device:3b: legacy freeze [ 31.640315] acpi device:3a: legacy freeze [ 31.640320] acpi device:39: legacy freeze [ 31.640324] acpi device:38: legacy freeze [ 31.640328] acpi device:37: legacy freeze [ 31.640333] acpi device:36: legacy freeze [ 31.640337] acpi device:35: legacy freeze [ 31.640342] acpi device:34: legacy freeze [ 31.640346] acpi device:33: legacy freeze [ 31.640350] acpi device:32: legacy freeze [ 31.640355] acpi PNP0C01:02: legacy freeze [ 31.640360] acpi PNP0C01:01: legacy freeze [ 31.640364] acpi device:31: legacy freeze [ 31.640368] acpi device:30: legacy freeze [ 31.640373] acpi device:2f: legacy freeze [ 31.640377] acpi device:2e: legacy freeze [ 31.640382] video LNXVIDEO:00: legacy freeze [ 31.640387] acpi device:2d: legacy freeze [ 31.640391] acpi device:2c: legacy freeze [ 31.640396] acpi device:2b: legacy freeze [ 31.640400] acpi device:2a: legacy freeze [ 31.640405] acpi device:29: legacy freeze [ 31.640409] acpi device:28: legacy freeze [ 31.640414] acpi device:27: legacy freeze [ 31.640418] acpi device:26: legacy freeze [ 31.640422] acpi device:25: legacy freeze [ 31.640427] acpi device:24: legacy freeze [ 31.640431] acpi device:23: legacy freeze [ 31.640436] acpi device:22: legacy freeze [ 31.640440] acpi device:21: legacy freeze [ 31.640445] acpi device:20: legacy freeze [ 31.640449] acpi device:1f: legacy freeze [ 31.640453] acpi device:1e: legacy freeze [ 31.640458] acpi device:1d: legacy freeze [ 31.640462] acpi device:1c: legacy freeze [ 31.640467] acpi device:1b: legacy freeze [ 31.640471] acpi device:1a: legacy freeze [ 31.640476] acpi device:19: legacy freeze [ 31.640480] acpi device:18: legacy freeze [ 31.640485] acpi device:17: legacy freeze [ 31.640489] acpi device:16: legacy freeze [ 31.640494] acpi device:15: legacy freeze [ 31.640498] acpi device:14: legacy freeze [ 31.640503] acpi device:13: legacy freeze [ 31.640507] acpi device:12: legacy freeze [ 31.640512] acpi device:11: legacy freeze [ 31.640516] acpi device:10: legacy freeze [ 31.640521] acpi device:0f: legacy freeze [ 31.640525] acpi device:0e: legacy freeze [ 31.640529] acpi device:0d: legacy freeze [ 31.640534] acpi device:0c: legacy freeze [ 31.640539] acpi device:0b: legacy freeze [ 31.640543] acpi device:0a: legacy freeze [ 31.640548] acpi device:09: legacy freeze [ 31.640552] acpi device:08: legacy freeze [ 31.640557] acpi device:07: legacy freeze [ 31.640561] acpi device:06: legacy freeze [ 31.640566] acpi device:05: legacy freeze [ 31.640570] acpi device:04: legacy freeze [ 31.640575] acpi device:03: legacy freeze [ 31.640579] acpi device:02: legacy freeze [ 31.640584] acpi device:01: legacy freeze [ 31.640588] acpi PNP0103:00: legacy freeze [ 31.640593] acpi PNP0C04:00: legacy freeze [ 31.640597] acpi PNP0200:00: legacy freeze [ 31.640602] acpi PNP0000:00: legacy freeze [ 31.640607] acpi PNP0C01:00: legacy freeze [ 31.640611] acpi PNP0800:00: legacy freeze [ 31.640616] acpi PNP0100:00: legacy freeze [ 31.640620] acpi PNP0B00:00: legacy freeze [ 31.640624] acpi PNP0303:00: legacy freeze [ 31.640629] acpi PNP0F13:00: legacy freeze [ 31.640633] acpi PNP0C02:00: legacy freeze [ 31.640638] acpi device:00: legacy freeze [ 31.640643] pci_root PNP0A03:00: legacy freeze [ 31.640648] acpi LNXSYBUS:00: legacy freeze [ 31.640652] processor LNXCPU:01: legacy freeze [ 31.640660] processor LNXCPU:00: legacy freeze [ 31.640665] acpi LNXSYSTM:00: legacy freeze [ 31.640676] PM: freeze of devices complete after 709.277 msecs [ 31.640762] dell-laptop dell-laptop: LATE freeze [ 31.640767] platform regulatory.0: LATE freeze [ 31.640794] dcdbas dcdbas: LATE freeze [ 31.640798] platform dell_rbu: LATE freeze [ 31.640803] iTCO_wdt iTCO_wdt: LATE freeze [ 31.640807] coretemp coretemp.1: LATE freeze [ 31.640811] coretemp coretemp.0: LATE freeze [ 31.640815] psmouse serio1: LATE freeze [ 31.640819] atkbd serio0: LATE freeze [ 31.640823] i8042 i8042: LATE freeze [ 31.640833] serial8250 serial8250: LATE freeze [ 31.640847] vesafb vesafb.0: LATE freeze [ 31.640853] pcspkr pcspkr: LATE freeze [ 31.640862] pci 0000:03:09.3: LATE freeze [ 31.640915] pci 0000:03:09.2: LATE freeze [ 31.640966] sdhci-pci 0000:03:09.1: LATE freeze [ 31.640970] pci 0000:03:09.0: LATE freeze [ 31.641021] iwl3945 0000:0b:00.0: LATE freeze [ 31.641026] sky2 0000:09:00.0: LATE freeze [ 31.641030] pci 0000:01:00.0: LATE freeze [ 31.641101] pci 0000:00:1f.3: LATE freeze [ 31.641145] ahci 0000:00:1f.2: LATE freeze [ 31.641149] ata_piix 0000:00:1f.1: LATE freeze [ 31.641153] pci 0000:00:1f.0: LATE freeze [ 31.641213] pci 0000:00:1e.0: LATE freeze [ 31.641263] ehci_hcd 0000:00:1d.7: LATE freeze [ 31.641319] uhci_hcd 0000:00:1d.2: LATE freeze [ 31.641363] uhci_hcd 0000:00:1d.1: LATE freeze [ 31.641406] uhci_hcd 0000:00:1d.0: LATE freeze [ 31.641450] pcieport 0000:00:1c.4: LATE freeze [ 31.641454] pcieport 0000:00:1c.1: LATE freeze [ 31.641458] pcieport 0000:00:1c.0: LATE freeze [ 31.641462] HDA Intel 0000:00:1b.0: LATE freeze [ 31.641466] ehci_hcd 0000:00:1a.7: LATE freeze [ 31.641521] uhci_hcd 0000:00:1a.1: LATE freeze [ 31.641564] uhci_hcd 0000:00:1a.0: LATE freeze [ 31.641607] pcieport 0000:00:01.0: LATE freeze [ 31.641611] pci 0000:00:00.0: LATE freeze [ 31.641656] PM: late freeze of devices complete after 0.974 msecs [ 31.646446] ACPI: Preparing to enter system sleep state S4 [ 31.648925] PM: Saving platform NVS memory [ 31.680030] Disabling non-boot CPUs ... [ 31.841534] CPU 1 is now offline [ 31.841538] SMP alternatives: switching to UP code [ 31.851795] Extended CMOS year: 2000 [ 31.851795] PM: Restoring platform NVS memory [ 31.851795] Extended CMOS year: 2000 [ 31.851795] Enabling non-boot CPUs ... [ 31.870240] SMP alternatives: switching to SMP code [ 31.880808] Booting Node 0 Processor 1 APIC 0x1 [ 32.100766] CPU1 is up [ 32.102106] ACPI: Waking up from system sleep state S4 [ 32.112496] pci 0000:00:00.0: EARLY restore [ 32.112524] pcieport 0000:00:01.0: EARLY restore [ 32.112556] uhci_hcd 0000:00:1a.0: EARLY restore [ 32.112586] uhci_hcd 0000:00:1a.1: EARLY restore [ 32.112616] ehci_hcd 0000:00:1a.7: EARLY restore [ 32.112663] HDA Intel 0000:00:1b.0: EARLY restore [ 32.112717] pcieport 0000:00:1c.0: EARLY restore [ 32.112787] pcieport 0000:00:1c.1: EARLY restore [ 32.112857] pcieport 0000:00:1c.4: EARLY restore [ 32.112927] uhci_hcd 0000:00:1d.0: EARLY restore [ 32.112957] uhci_hcd 0000:00:1d.1: EARLY restore [ 32.112987] uhci_hcd 0000:00:1d.2: EARLY restore [ 32.113017] ehci_hcd 0000:00:1d.7: EARLY restore [ 32.113064] pci 0000:00:1e.0: EARLY restore [ 32.113103] pci 0000:00:1f.0: EARLY restore [ 32.113153] ata_piix 0000:00:1f.1: EARLY restore [ 32.113181] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 32.113188] ahci 0000:00:1f.2: EARLY restore [ 32.113226] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 32.113258] pci 0000:00:1f.3: EARLY restore [ 32.113287] pci 0000:01:00.0: EARLY restore [ 32.113365] sky2 0000:09:00.0: EARLY restore [ 32.113489] iwl3945 0000:0b:00.0: EARLY restore [ 32.113670] iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [ 32.113782] pci 0000:03:09.0: EARLY restore [ 32.113822] sdhci-pci 0000:03:09.1: EARLY restore [ 32.113855] sdhci-pci 0000:03:09.1: restoring config space at offset 0x1 (was 0x2100102, writing 0x2100106) [ 32.113866] pci 0000:03:09.2: EARLY restore [ 32.113906] pci 0000:03:09.3: EARLY restore [ 32.113951] pcspkr pcspkr: EARLY restore [ 32.113954] vesafb vesafb.0: EARLY restore [ 32.113961] serial8250 serial8250: EARLY restore [ 32.113966] i8042 i8042: EARLY restore [ 32.113968] atkbd serio0: EARLY restore [ 32.113970] psmouse serio1: EARLY restore [ 32.113972] coretemp coretemp.0: EARLY restore [ 32.113973] coretemp coretemp.1: EARLY restore [ 32.113975] iTCO_wdt iTCO_wdt: EARLY restore [ 32.113977] platform dell_rbu: EARLY restore [ 32.113979] dcdbas dcdbas: EARLY restore [ 32.113995] platform regulatory.0: EARLY restore [ 32.113997] dell-laptop dell-laptop: EARLY restore [ 32.114002] PM: early restore of devices complete after 1.520 msecs [ 32.114035] acpi LNXSYSTM:00: legacy restore [ 32.114037] processor LNXCPU:00: legacy restore [ 32.114041] processor LNXCPU:01: legacy restore [ 32.114042] acpi LNXSYBUS:00: legacy restore [ 32.114044] pci_root PNP0A03:00: legacy restore [ 32.114046] acpi device:00: legacy restore [ 32.114047] acpi PNP0C02:00: legacy restore [ 32.114049] acpi PNP0F13:00: legacy restore [ 32.114051] acpi PNP0303:00: legacy restore [ 32.114052] acpi PNP0B00:00: legacy restore [ 32.114054] acpi PNP0100:00: legacy restore [ 32.114055] acpi PNP0800:00: legacy restore [ 32.114057] acpi PNP0C01:00: legacy restore [ 32.114059] acpi PNP0000:00: legacy restore [ 32.114060] acpi PNP0200:00: legacy restore [ 32.114062] acpi PNP0C04:00: legacy restore [ 32.114063] acpi PNP0103:00: legacy restore [ 32.114065] acpi device:01: legacy restore [ 32.114066] acpi device:02: legacy restore [ 32.114068] acpi device:03: legacy restore [ 32.114069] acpi device:04: legacy restore [ 32.114071] acpi device:05: legacy restore [ 32.114073] acpi device:06: legacy restore [ 32.114074] acpi device:07: legacy restore [ 32.114076] acpi device:08: legacy restore [ 32.114077] acpi device:09: legacy restore [ 32.114079] acpi device:0a: legacy restore [ 32.114080] acpi device:0b: legacy restore [ 32.114082] acpi device:0c: legacy restore [ 32.114084] acpi device:0d: legacy restore [ 32.114085] acpi device:0e: legacy restore [ 32.114087] acpi device:0f: legacy restore [ 32.114088] acpi device:10: legacy restore [ 32.114090] acpi device:11: legacy restore [ 32.114091] acpi device:12: legacy restore [ 32.114093] acpi device:13: legacy restore [ 32.114095] acpi device:14: legacy restore [ 32.114096] acpi device:15: legacy restore [ 32.114098] acpi device:16: legacy restore [ 32.114099] acpi device:17: legacy restore [ 32.114101] acpi device:18: legacy restore [ 32.114102] acpi device:19: legacy restore [ 32.114104] acpi device:1a: legacy restore [ 32.114105] acpi device:1b: legacy restore [ 32.114107] acpi device:1c: legacy restore [ 32.114108] acpi device:1d: legacy restore [ 32.114110] acpi device:1e: legacy restore [ 32.114111] acpi device:1f: legacy restore [ 32.114119] acpi device:20: legacy restore [ 32.114120] acpi device:21: legacy restore [ 32.114122] acpi device:22: legacy restore [ 32.114123] acpi device:23: legacy restore [ 32.114124] acpi device:24: legacy restore [ 32.114126] acpi device:25: legacy restore [ 32.114127] acpi device:26: legacy restore [ 32.114129] acpi device:27: legacy restore [ 32.114130] acpi device:28: legacy restore [ 32.114132] acpi device:29: legacy restore [ 32.114133] acpi device:2a: legacy restore [ 32.114134] acpi device:2b: legacy restore [ 32.114136] acpi device:2c: legacy restore [ 32.114137] acpi device:2d: legacy restore [ 32.114139] video LNXVIDEO:00: legacy restore [ 32.115963] acpi device:2e: legacy restore [ 32.115965] acpi device:2f: legacy restore [ 32.115967] acpi device:30: legacy restore [ 32.115968] acpi device:31: legacy restore [ 32.115970] acpi PNP0C01:01: legacy restore [ 32.115971] acpi PNP0C01:02: legacy restore [ 32.115972] acpi device:32: legacy restore [ 32.115974] acpi device:33: legacy restore [ 32.115975] acpi device:34: legacy restore [ 32.115977] acpi device:35: legacy restore [ 32.115978] acpi device:36: legacy restore [ 32.115980] acpi device:37: legacy restore [ 32.115981] acpi device:38: legacy restore [ 32.115982] acpi device:39: legacy restore [ 32.115984] acpi device:3a: legacy restore [ 32.115985] acpi device:3b: legacy restore [ 32.115987] acpi device:3c: legacy restore [ 32.115988] acpi device:3d: legacy restore [ 32.115990] pci_link PNP0C0F:00: legacy restore [ 32.115991] pci_link PNP0C0F:01: legacy restore [ 32.115993] pci_link PNP0C0F:02: legacy restore [ 32.115994] pci_link PNP0C0F:03: legacy restore [ 32.115996] pci_link PNP0C0F:04: legacy restore [ 32.115997] pci_link PNP0C0F:05: legacy restore [ 32.115999] pci_link PNP0C0F:06: legacy restore [ 32.116001] pci_link PNP0C0F:07: legacy restore [ 32.116002] acpi PNP0C01:03: legacy restore [ 32.116004] button PNP0C0D:00: legacy restore [ 32.257677] button PNP0C0C:00: legacy restore [ 32.257680] button PNP0C0E:00: legacy restore [ 32.257682] ac ACPI0003:00: legacy restore [ 32.257717] battery PNP0C0A:00: legacy restore [ 32.283574] acpi PNP0C32:00: legacy restore [ 32.283577] wmi pnp0c14:00: legacy restore [ 32.283578] acpi LNXTHERM:00: legacy restore [ 32.283580] thermal LNXTHERM:01: legacy restore [ 32.283654] pci 0000:00:00.0: restore [ 32.283657] pcieport 0000:00:01.0: restore [ 32.283660] uhci_hcd 0000:00:1a.0: restore [ 32.283666] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 32.283669] uhci_hcd 0000:00:1a.0: uhci_pci_resume [ 32.283688] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 32.283689] uhci_hcd 0000:00:1a.0: Performing full reset [ 32.283710] usb usb3: root hub lost power or was reset [ 32.283711] usb usb3: suspend_rh [ 32.283740] uhci_hcd 0000:00:1a.1: restore [ 32.283744] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 32.283747] uhci_hcd 0000:00:1a.1: uhci_pci_resume [ 32.283765] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 32.283766] uhci_hcd 0000:00:1a.1: Performing full reset [ 32.283787] usb usb4: root hub lost power or was reset [ 32.283788] usb usb4: suspend_rh [ 32.283802] ehci_hcd 0000:00:1a.7: restore [ 32.283807] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 32.283812] usb usb1: root hub lost power or was reset [ 32.283817] ehci_hcd 0000:00:1a.7: reset command 010002 (park)=0 ithresh=1 period=1024 Reset HALT [ 32.287711] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 32.287716] HDA Intel 0000:00:1b.0: restore [ 32.287723] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 32.287729] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 32.287772] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 32.287805] pcieport 0000:00:1c.0: restore [ 32.287808] pcieport 0000:00:1c.1: restore [ 32.287810] pcieport 0000:00:1c.4: restore [ 32.287813] uhci_hcd 0000:00:1d.0: restore [ 32.287817] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 32.287820] uhci_hcd 0000:00:1d.0: uhci_pci_resume [ 32.287838] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 32.287839] uhci_hcd 0000:00:1d.0: Performing full reset [ 32.287859] usb usb5: root hub lost power or was reset [ 32.287860] usb usb5: suspend_rh [ 32.287874] uhci_hcd 0000:00:1d.1: restore [ 32.287879] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 32.287882] uhci_hcd 0000:00:1d.1: uhci_pci_resume [ 32.287899] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 32.287901] uhci_hcd 0000:00:1d.1: Performing full reset [ 32.287921] usb usb6: root hub lost power or was reset [ 32.287922] usb usb6: suspend_rh [ 32.287946] uhci_hcd 0000:00:1d.2: restore [ 32.287951] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 32.287954] uhci_hcd 0000:00:1d.2: uhci_pci_resume [ 32.287972] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 32.287973] uhci_hcd 0000:00:1d.2: Performing full reset [ 32.287992] usb usb7: root hub lost power or was reset [ 32.287994] usb usb7: suspend_rh [ 32.288018] ehci_hcd 0000:00:1d.7: restore [ 32.288022] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 32.288027] usb usb2: root hub lost power or was reset [ 32.288032] ehci_hcd 0000:00:1d.7: reset command 010002 (park)=0 ithresh=1 period=1024 Reset HALT [ 32.291928] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 32.291933] pci 0000:00:1e.0: restore [ 32.291939] pci 0000:00:1e.0: setting latency timer to 64 [ 32.291942] pci 0000:00:1f.0: restore [ 32.291944] ata_piix 0000:00:1f.1: restore [ 32.291949] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 32.291954] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 32.291970] ata1.00: _GTF evaluation failed (AE 0x1001) [ 32.292132] ata2: port disabled. ignoring. [ 32.292148] ahci 0000:00:1f.2: restore [ 32.292156] ahci 0000:00:1f.2: setting latency timer to 64 [ 32.292207] pci 0000:00:1f.3: restore [ 32.292208] pci 0000:01:00.0: restore [ 32.292210] sky2 0000:09:00.0: restore [ 32.292264] iwl3945 0000:0b:00.0: restore [ 32.292312] pci 0000:03:09.0: restore [ 32.292313] sdhci-pci 0000:03:09.1: restore [ 32.292318] sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 32.293335] pci 0000:03:09.2: restore [ 32.293337] pci 0000:03:09.3: restore [ 32.293341] pnp 00:00: legacy restore [ 32.293343] system 00:01: legacy restore [ 32.293345] i8042 aux 00:02: legacy restore [ 32.293347] i8042 kbd 00:03: legacy restore [ 32.293350] rtc_cmos 00:04: legacy restore [ 32.293352] pnp 00:05: legacy restore [ 32.293354] system 00:06: legacy restore [ 32.293355] pnp 00:07: legacy restore [ 32.293357] pnp 00:08: legacy restore [ 32.293359] system 00:09: legacy restore [ 32.293361] system 00:0a: legacy restore [ 32.293362] system 00:0b: legacy restore [ 32.293364] system 00:0c: legacy restore [ 32.293370] pcspkr pcspkr: restore [ 32.293375] vesafb vesafb.0: restore [ 32.293394] serial8250 serial8250: restore [ 32.293398] usb usb1: type restore [ 32.293401] usb usb1: usb resume [ 32.293403] ehci_hcd 0000:00:1a.7: resume root hub after power loss [ 32.440506] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion [ 32.440517] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 32.460247] hub 1-0:1.0: hub_reset_resume [ 32.460254] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 32.510594] ata1.00: configured for UDMA/33 [ 32.570175] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 32.570187] hub 1-0:1.0: port 1: status 0501 change 0001 [ 32.570203] ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 32.640186] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 32.641909] ata3.00: configured for UDMA/100 [ 32.660170] ata5: SATA link down (SStatus 0 SControl 300) [ 32.680201] usb usb2: type restore [ 32.680209] usb usb2: usb resume [ 32.680216] ehci_hcd 0000:00:1d.7: resume root hub after power loss [ 32.730254] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 32.830342] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion [ 32.830354] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT [ 32.830365] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 32.850187] hub 2-0:1.0: hub_reset_resume [ 32.850194] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 32.960180] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 32.960192] hub 2-0:1.0: port 1: status 0501 change 0001 [ 32.960208] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 32.960214] hub 2-0:1.0: port 2: status 0501 change 0001 [ 32.960241] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 33.070177] usb usb3: type restore [ 33.070185] usb usb3: usb resume [ 33.070190] usb usb3: wakeup_rh [ 33.120231] hub 3-0:1.0: hub_reset_resume [ 33.120236] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 33.230254] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 33.230272] uhci_hcd 0000:00:1a.0: port 2 portsc 009b,00 [ 33.230279] hub 3-0:1.0: port 2: status 0101 change 0003 [ 33.340177] usb usb4: type restore [ 33.340188] usb usb5: type restore [ 33.340195] usb usb6: type restore [ 33.340200] usb usb6: usb resume [ 33.340205] usb usb6: wakeup_rh [ 33.390232] hub 6-0:1.0: hub_reset_resume [ 33.390237] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 33.500180] uhci_hcd 0000:00:1d.1: port 1 portsc 01ab,00 [ 33.500190] hub 6-0:1.0: port 1: status 0301 change 0003 [ 33.610285] usb usb7: type restore [ 33.610294] usb usb7: usb resume [ 33.610298] usb usb7: wakeup_rh [ 33.660167] hub 7-0:1.0: hub_reset_resume [ 33.660174] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 33.770188] uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00 [ 33.770196] hub 7-0:1.0: port 2: status 0101 change 0003 [ 33.880179] i8042 i8042: restore [ 33.882693] atkbd serio0: restore [ 33.882701] psmouse serio1: restore [ 33.882706] input input0: type restore [ 33.882726] rtc rtc0: legacy class restore [ 33.882802] coretemp coretemp.0: restore [ 33.882808] coretemp coretemp.1: restore [ 33.882814] iTCO_wdt iTCO_wdt: restore [ 33.882821] leds mmc0::: legacy class restore [ 33.882827] platform dell_rbu: restore [ 33.882832] dcdbas dcdbas: restore [ 33.882840] input input1: type restore [ 33.883499] usb 1-1: type restore [ 33.883518] usb 1-1: finish reset-resume [ 33.940382] ehci_hcd 0000:00:1a.7: port 1 high speed [ 33.940393] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 34.000190] usb 1-1: reset high speed USB device using ehci_hcd and address 2 [ 34.060379] ehci_hcd 0000:00:1a.7: port 1 high speed [ 34.060390] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 34.154536] input input2: type restore [ 34.154547] input input3: type restore [ 34.154555] input input4: type restore [ 34.154561] input input5: type restore [ 34.154567] input input6: type restore [ 34.154590] scsi host0: legacy restore [ 34.154597] usb 2-1: type restore [ 34.154614] usb 2-1: finish reset-resume [ 34.210464] ehci_hcd 0000:00:1d.7: port 1 high speed [ 34.210475] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 34.270185] usb 2-1: reset high speed USB device using ehci_hcd and address 2 [ 34.330464] ehci_hcd 0000:00:1d.7: port 1 high speed [ 34.330474] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 34.421745] scsi host1: legacy restore [ 34.421754] scsi host2: legacy restore [ 34.421763] scsi host3: legacy restore [ 34.421769] scsi host4: legacy restore [ 34.421774] scsi host5: legacy restore [ 34.421779] scsi target0:0:0: legacy restore [ 34.421784] sr 0:0:0:0: legacy restore [ 34.421797] usb 2-2: type restore [ 34.421813] usb 2-2: finish reset-resume [ 34.480464] ehci_hcd 0000:00:1d.7: port 2 high speed [ 34.480475] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 34.540219] usb 2-2: reset high speed USB device using ehci_hcd and address 3 [ 34.600464] ehci_hcd 0000:00:1d.7: port 2 high speed [ 34.600475] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 34.691982] hub 2-2:1.0: hub_reset_resume [ 34.691990] hub 2-2:1.0: enabling power on all ports [ 34.800611] hub 2-2:1.0: port 1: status 0101 change 0001 [ 34.910186] usb 2-2: link qh256-0001/ffff88011c2bc940 start 2 [1/0 us] [ 34.910208] scsi target3:0:0: legacy restore [ 34.910213] sd 3:0:0:0: legacy restore [ 34.910220] sd 3:0:0:0: [sda] Starting disk [ 34.941998] usb 3-2: type restore [ 34.942024] usb 3-2: finish reset-resume [ 35.060177] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 35.200173] usb 3-2: ep0 maxpacket = 8 [ 35.216414] usb 6-1: type restore [ 35.216436] usb 6-1: finish reset-resume [ 35.480177] usb 6-1: reset low speed USB device using uhci_hcd and address 2 [ 35.830409] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 35.830427] input input7: type restore [ 35.830457] usb 7-2: type restore [ 35.830475] usb 7-2: finish reset-resume [ 35.950185] usb 7-2: reset full speed USB device using uhci_hcd and address 2 [ 36.090165] usb 7-2: ep0 maxpacket = 8 [ 36.105394] hub 7-2:1.0: hub_reset_resume [ 36.105402] hub 7-2:1.0: enabling power on all ports [ 36.211400] hub 7-2:1.0: port 1: status 0101 change 0001 [ 36.213400] hub 7-2:1.0: port 2: status 0101 change 0001 [ 36.215399] hub 7-2:1.0: port 3: status 0101 change 0001 [ 36.320182] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 36.320199] usb 2-2.1: type restore [ 36.320714] usb 2-2.1: finish reset-resume [ 36.400611] usb 2-2.1: reset full speed USB device using ehci_hcd and address 6 [ 36.510166] usb 2-2.1: ep0 maxpacket = 8 [ 36.512489] usblp 2-2.1:1.1: no reset_resume for driver usblp? [ 36.512497] usblp 2-2.1:1.1: forced unbind [ 36.512516] drivers/usb/core/file.c: removing 0 minor [ 36.512525] PM: Removing info for No Bus:lp0 [ 36.512624] usblp0: removed [ 36.512643] usb 7-2.1: type restore [ 36.514400] usb 7-2.1: finish reset-resume [ 36.591403] usb 7-2.1: reset full speed USB device using uhci_hcd and address 3 [ 36.703400] btusb 7-2.1:1.0: no reset_resume for driver btusb? [ 36.703408] btusb 7-2.1:1.1: no reset_resume for driver btusb? [ 36.703414] btusb 7-2.1:1.0: forced unbind [ 36.703445] PM: Removing info for No Bus:rfkill0 [ 36.703497] PM: Removing info for No Bus:hci0 [ 36.703561] usb 7-2.2: type restore [ 36.704400] usb 7-2.2: finish reset-resume [ 36.781394] usb 7-2.2: reset full speed USB device using uhci_hcd and address 4 [ 36.880164] usb 7-2.2: ep0 maxpacket = 8 [ 36.897406] uhci_hcd 0000:00:1d.2: reserve dev 4 ep81-INT, period 8, phase 4, 17 us [ 36.897423] input input8: type restore [ 36.897453] usb 7-2.3: type restore [ 36.898406] usb 7-2.3: finish reset-resume [ 36.971403] usb 7-2.3: reset full speed USB device using uhci_hcd and address 5 [ 37.070166] usb 7-2.3: ep0 maxpacket = 8 [ 37.087408] input input9: type restore [ 37.087422] scsi target2:0:0: legacy restore [ 37.087427] sd 2:0:0:0: legacy restore [ 37.087444] platform regulatory.0: restore [ 37.087450] dell-laptop dell-laptop: restore [ 37.087455] input input10: type restore [ 37.087463] input input11: type restore [ 37.087468] input input12: type restore [ 37.087474] input input13: type restore [ 37.087482] backlight acpi_video0: legacy class restore [ 37.087490] input input14: type restore [ 37.087496] ieee80211 phy0: legacy class restore [ 37.087512] rfkill rfkill1: legacy class restore [ 37.087548] PM: restore of devices complete after 4973.508 msecs [ 37.087565] dell-laptop dell-laptop: completing restore [ 37.087570] platform regulatory.0: completing restore [ 37.087584] usb 7-2.3: completing type restore [ 37.087597] usb 7-2.2: completing type restore [ 37.087616] usb 7-2.1: completing type restore [ 37.087655] usbserial_generic 7-2.1:1.0: usb_probe_interface [ 37.087660] usbserial_generic 7-2.1:1.0: usb_probe_interface - got id [ 37.087702] btusb 7-2.1:1.0: usb_probe_interface [ 37.087706] btusb 7-2.1:1.0: usb_probe_interface - got id [ 37.087766] PM: Adding info for No Bus:hci0 [ 37.087808] PM: Adding info for No Bus:rfkill2 [ 37.087887] usb 2-2.1: completing type restore [ 37.087903] usblp 2-2.1:1.1: usb_probe_interface [ 37.087908] usblp 2-2.1:1.1: usb_probe_interface - got id [ 37.089142] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 37.089228] PM: Adding info for No Bus:lp0 [ 37.089263] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3419 [ 37.089277] usb 7-2: completing type restore [ 37.089291] usb 6-1: completing type restore [ 37.089302] usb 3-2: completing type restore [ 37.089324] usb 2-2: completing type restore [ 37.089349] usb 2-1: completing type restore [ 37.089393] usb 1-1: completing type restore [ 37.089405] dcdbas dcdbas: completing restore [ 37.089410] platform dell_rbu: completing restore [ 37.089418] iTCO_wdt iTCO_wdt: completing restore [ 37.089424] coretemp coretemp.1: completing restore [ 37.089430] coretemp coretemp.0: completing restore [ 37.089442] i8042 i8042: completing restore [ 37.089450] usb usb7: completing type restore [ 37.089459] usb usb6: completing type restore [ 37.089468] usb usb5: completing type restore [ 37.089476] usb usb4: completing type restore [ 37.089484] usb usb3: completing type restore [ 37.089493] usb usb2: completing type restore [ 37.089502] usb usb1: completing type restore [ 37.089513] serial8250 serial8250: completing restore [ 37.089586] vesafb vesafb.0: completing restore [ 37.089605] pcspkr pcspkr: completing restore [ 37.089646] pci 0000:03:09.3: completing restore [ 37.089651] pci 0000:03:09.2: completing restore [ 37.089656] sdhci-pci 0000:03:09.1: completing restore [ 37.089661] pci 0000:03:09.0: completing restore [ 37.089668] iwl3945 0000:0b:00.0: completing restore [ 37.089675] sky2 0000:09:00.0: completing restore [ 37.089681] pci 0000:01:00.0: completing restore [ 37.089685] pci 0000:00:1f.3: completing restore [ 37.089691] ahci 0000:00:1f.2: completing restore [ 37.089696] ata_piix 0000:00:1f.1: completing restore [ 37.089701] pci 0000:00:1f.0: completing restore [ 37.089705] pci 0000:00:1e.0: completing restore [ 37.089710] ehci_hcd 0000:00:1d.7: completing restore [ 37.089715] uhci_hcd 0000:00:1d.2: completing restore [ 37.089719] uhci_hcd 0000:00:1d.1: completing restore [ 37.089724] uhci_hcd 0000:00:1d.0: completing restore [ 37.089729] pcieport 0000:00:1c.4: completing restore [ 37.089733] pcieport 0000:00:1c.1: completing restore [ 37.089738] pcieport 0000:00:1c.0: completing restore [ 37.089743] HDA Intel 0000:00:1b.0: completing restore [ 37.089748] ehci_hcd 0000:00:1a.7: completing restore [ 37.089753] uhci_hcd 0000:00:1a.1: completing restore [ 37.089757] uhci_hcd 0000:00:1a.0: completing restore [ 37.089762] pcieport 0000:00:01.0: completing restore [ 37.089767] pci 0000:00:00.0: completing restore [ 37.322328] ...20%...40%...60%...80%...100% [ 38.089375] Waited for i/o due to readahead not ready 155 times. [ 38.089381] Waited for i/o due to throughput_throttle 95 times. [ 38.232567] Restarting all filesystems ... [ 38.233370] Restarting tasks ... [ 38.233414] usb usb5: usb resume [ 38.233419] usb usb5: wakeup_rh [ 38.233430] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000 [ 38.233445] hub 1-0:1.0: port 1, status 0503, change 0000, 480 Mb/s [ 38.233451] hub 2-0:1.0: state 7 ports 6 chg 0006 evt 0000 [ 38.233459] hub 2-0:1.0: port 1, status 0503, change 0000, 480 Mb/s [ 38.233466] hub 2-0:1.0: port 2, status 0503, change 0000, 480 Mb/s [ 38.233472] hub 3-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 38.233482] hub 3-0:1.0: port 2, status 0103, change 0000, 12 Mb/s [ 38.233487] hub 6-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 38.233497] hub 6-0:1.0: port 1, status 0303, change 0000, 1.5 Mb/s [ 38.233502] hub 7-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 38.233512] hub 7-0:1.0: port 2, status 0103, change 0000, 12 Mb/s [ 38.233518] hub 2-2:1.0: state 7 ports 4 chg 0002 evt 0002 [ 38.233554] Restarting tasks ... [ 38.236237] hub 2-2:1.0: port 1, status 0103, change 0000, 12 Mb/s [ 38.236249] done. [ 38.236596] hub 7-2:1.0: state 7 ports 3 chg 000e evt 0008 [ 38.238257] hub 7-2:1.0: port 1, status 0103, change 0000, 12 Mb/s [ 38.239248] hub 7-2:1.0: port 2, status 0103, change 0000, 12 Mb/s [ 38.240259] hub 7-2:1.0: port 3, status 0103, change 0000, 12 Mb/s [ 38.242843] TuxOnIce debugging info: [ 38.242845] - TuxOnIce core : 3.0.99.44 [ 38.242845] - Kernel Version : 2.6.33-rc1 [ 38.242846] - Compiler vers. : 4.3 [ 38.242847] - Attempt number : 1 [ 38.242847] - Parameters : 0 667657 0 1 0 4 [ 38.242848] - Overall expected compression percentage: 55. [ 38.242849] - Compressor is 'lzo'. [ 38.242849] Compressed 255631360 bytes into 63009417 (75 percent compression). [ 38.242850] - Block I/O active. [ 38.242851] Used 15666 pages from swap on /dev/sda5. [ 38.242851] - Max outstanding reads 1381. Max writes 7145. [ 38.242852] Memory_needed: 1024 x (4096 + 336 + 104) = 4644864 bytes. [ 38.242853] Free mem throttle point reached 0. [ 38.242854] - Swap Allocator enabled. [ 38.242854] Swap available for image: 767093 pages. [ 38.242855] - File Allocator active. [ 38.242856] Storage available for image: 0 pages. [ 38.242856] - I/O speed: Write 151 MB/s, Read 156 MB/s. [ 38.242857] - Extra pages : 0 used/2000. [ 38.242858] - Result : Succeeded. [ 38.280049] hub 5-0:1.0: hub_reset_resume [ 38.280052] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.291297] uvcvideo 1-1:1.0: usb_probe_interface [ 38.291301] uvcvideo 1-1:1.0: usb_probe_interface - got id [ 38.291318] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 38.291776] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 38.292340] PM: Adding info for No Bus:video0 [ 38.292669] PM: Adding info for No Bus:input16 [ 38.292951] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input16 [ 38.292974] PM: Adding info for No Bus:event15 [ 38.293263] usbcore: registered new interface driver uvcvideo [ 38.293265] USB Video Class driver (v0.1.0) [ 38.294917] usb 1-1:1.0: uevent [ 38.295014] usb 1-1: uevent [ 38.299755] usb 1-1:1.0: uevent [ 38.299847] usb 1-1: uevent [ 38.390065] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 [ 38.390090] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00 [ 38.500116] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.540182] usb usb5: suspend_rh (auto-stop) [ 41.040208] hub 5-0:1.0: hub_suspend [ 41.040226] usb usb5: bus auto-suspend [ 41.040231] usb usb5: suspend_rh