| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Dec 2009 10:22:17 +0100 From: Torsten Kaiser <just.for.lkml@...glemail.com> To: linux-kernel@...r.kernel.org Cc: Jeff Garzik <jgarzik@...ox.com>, linux-ide@...r.kernel.org Subject: MSI broken in libata? As reported in http://lkml.org/lkml/2009/12/19/82 the new MSI support for sata_sil24 does not work for me. This is still the same with 2.6.33-rc2. Why I think, this might be a problem within libata: * other drivers can use MSI successful on my system (tg3, radeon, hda-intel) * happens both in sata_sil24 and sata_nv * the count in /proc/interrupts increases for the MSIs assigned to sata_sil24/sata_nv, so interrupt delivery seems to work * only writing seems to fail These are the changes in /proc/interrupts: Normal boot, without additional cmdline options: - 4: 0 0 96 174 IO-APIC-edge serial - 19: 18058 2 3 4738 IO-APIC-fasteoi sata_sil24, bttv0, Bt87x audio - 21: 0 0 0 0 IO-APIC-fasteoi sata_nv - 22: 0 0 0 0 IO-APIC-fasteoi sata_nv - 23: 872 357 4 1514 IO-APIC-fasteoi sata_nv, ohci_hcd:usb2 - 29: 4 405 0 140 PCI-MSI-edge HDA Intel - 30: 0 0 0 3 PCI-MSI-edge eth0 - 31: 3354 0 0 38 PCI-MSI-edge eth1 Boot with sata_nv.msi=1 and sata_sil24.msi=1, only booted into a rescue shell, thats why serial and eth0+1 are missing: + 19: 0 0 0 1 IO-APIC-fasteoi bttv0, Bt87x audio + 23: 0 0 5 13 IO-APIC-fasteoi ohci_hcd:usb2 + 29: 0 0 0 73 PCI-MSI-edge sata_sil24 + 30: 0 0 0 2590 PCI-MSI-edge sata_nv + 31: 0 0 0 0 PCI-MSI-edge sata_nv + 32: 0 0 0 0 PCI-MSI-edge sata_nv + 33: 0 0 0 89 PCI-MSI-edge HDA Intel Attached is the output from lspci -vv from a normal boot and from a boot with MSI enabled for both libata drivers. The errors messages from libata and other information about my system can be found in http://lkml.org/lkml/2009/12/19/82 ,or just ask if you need to know something else. Here are the differences from the lspci-outputs: lspci-vv-rc2.txt: complete, normal boot lspci-vv-rc2.msi.txt: init=/bin/sash, MSI for sata_sil24+sata_nv, network cards not initialised --- lspci-vv-rc2.txt 2009-12-25 00:11:19.992078760 +0100 +++ lspci-vv-rc2.msi.txt 2009-12-25 00:04:26.713756803 +0100 @@ -1,631 +1,586 @@ 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device 81f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] - Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] + Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] - Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] + Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 81f0 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) - Interrupt: pin A routed to IRQ 23 + Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: Memory at efafb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 + Capabilities: [b0] MSI: Enable+ Count=1/4 Maskable- 64bit+ + Address: 00000000fee0f00c Data: 4189 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 81f0 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) - Interrupt: pin B routed to IRQ 22 + Interrupt: pin B routed to IRQ 31 Region 0: I/O ports at c080 [size=8] Region 1: I/O ports at c000 [size=4] Region 2: I/O ports at bc00 [size=8] Region 3: I/O ports at b880 [size=4] Region 4: I/O ports at b800 [size=16] Region 5: Memory at efafa000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 + Capabilities: [b0] MSI: Enable+ Count=1/4 Maskable- 64bit+ + Address: 00000000fee0f00c Data: 4199 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 81f0 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) - Interrupt: pin C routed to IRQ 21 + Interrupt: pin C routed to IRQ 32 Region 0: I/O ports at b480 [size=8] Region 1: I/O ports at b400 [size=4] Region 2: I/O ports at b080 [size=8] Region 3: I/O ports at b000 [size=4] Region 4: I/O ports at ac00 [size=16] Region 5: Memory at efaf9000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 + Capabilities: [b0] MSI: Enable+ Count=1/4 Maskable- 64bit+ + Address: 00000000fee0f00c Data: 41a9 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ 00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) Subsystem: ASUSTeK Computer Inc. Device 8210 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) - Interrupt: pin B routed to IRQ 29 + Interrupt: pin B routed to IRQ 33 Region 0: Memory at efafc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable+ 64bit+ - Address: 00000000fee0200c Data: 41b1 + Address: 00000000fee0f00c Data: 41d1 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efb00000-efbfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4161 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0083 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at efbf0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at efbc0000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0100c Data: 4171 + Address: 00000000fee0f00c Data: 4171 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02) Subsystem: ASUSTeK Computer Inc. Device 8209 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 31 + Interrupt: pin A routed to IRQ 17 Region 0: Memory at efcf0000 (64-bit, non-prefetchable) [size=64K] - Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data - Product Name: Broadcom NetXtreme Gigabit Ethernet Controller - Read-only fields: - [PN] Part number: BCM95700A6 - [EC] Engineering changes: 106679-15 - [SN] Serial number: 0123456789 - [MN] Manufacture ID: 31 34 65 34 - [RV] Reserved: checksum bad, 26 byte(s) reserved - Read/write fields: - [YA] Asset tag: XYZ01234567 - [RW] Read-write area: 107 byte(s) free - End + Not readable Capabilities: [58] Vendor Specific Information <?> - Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+ + Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 41c1 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02) Subsystem: ASUSTeK Computer Inc. Device 8209 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 30 + Interrupt: pin A routed to IRQ 18 Region 0: Memory at efdf0000 (64-bit, non-prefetchable) [size=64K] - Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data - Product Name: Broadcom NetXtreme Gigabit Ethernet Controller - Read-only fields: - [PN] Part number: BCM95700A6 - [EC] Engineering changes: 106679-15 - [SN] Serial number: 0123456789 - [MN] Manufacture ID: 31 34 65 34 - [RV] Reserved: checksum bad, 26 byte(s) reserved - Read/write fields: - [YA] Asset tag: XYZ01234567 - [RW] Read-write area: 107 byte(s) free - End + Not readable Capabilities: [58] Vendor Specific Information <?> - Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+ + Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41b9 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- + DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- 04:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 819f - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 19 + Interrupt: pin A routed to IRQ 29 Region 0: Memory at efeffc00 (64-bit, non-prefetchable) [size=128] Region 2: Memory at efef8000 (64-bit, non-prefetchable) [size=16K] Region 4: I/O ports at ec00 [size=128] Expansion ROM at efe00000 [disabled] [size=512K] Capabilities: [54] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- - Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 + Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+ + Address: 00000000fee0f00c Data: 4179 Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- View attachment "lspci-vv-rc2.txt" of type "text/plain" (37066 bytes) View attachment "lspci-vv-rc2.msi.txt" of type "text/plain" (35444 bytes)
Powered by blists - more mailing lists