[ 0.000000] Linux version 2.6.32-rc6-00028-gac1aa47 (boris@liondog) (gcc version 4.4.2 (Debian 4.4.2-5) ) #32 SMP PREEMPT Fri Dec 25 20:40:06 CET 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f376000 (usable) [ 0.000000] BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved) [ 0.000000] BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable) [ 0.000000] BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable) [ 0.000000] BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable) [ 0.000000] BIOS-e820: 000000003f500000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f500 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFFE0000 mask 0FFFE0000 write-protect [ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable [ 0.000000] 2 base 000000000 mask 0E0000000 write-back [ 0.000000] 3 base 020000000 mask 0E0000000 write-back [ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 5 base 03F600000 mask 0FFE00000 uncachable [ 0.000000] 6 base 03F500000 mask 0FFF00000 uncachable [ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f376000 (usable) [ 0.000000] modified: 000000003f376000 - 000000003f3bf000 (reserved) [ 0.000000] modified: 000000003f3bf000 - 000000003f46d000 (usable) [ 0.000000] modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS) [ 0.000000] modified: 000000003f4bf000 - 000000003f4f0000 (usable) [ 0.000000] modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data) [ 0.000000] modified: 000000003f4ff000 - 000000003f500000 (usable) [ 0.000000] modified: 000000003f500000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 3f4fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 3f4fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 3f4f2000 05DE6 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 3f488000 00040 [ 0.000000] ACPI: SSDT 3f4fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: HPET 3f4fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 3f4fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 3f4f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: ASF! 3f4f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SLIC 3f4f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 3f4f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 125MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00007c0984] TEXT DATA BSS ==> [0000100000 - 00007c0984] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00007c1000 - 00007c4244] BRK ==> [00007c1000 - 00007c4244] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f500 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f376 [ 0.000000] 0: 0x0003f3bf -> 0x0003f46d [ 0.000000] 0: 0x0003f4bf -> 0x0003f4f0 [ 0.000000] 0: 0x0003f4ff -> 0x0003f500 [ 0.000000] On node 0 totalpages: 259057 [ 0.000000] free_area_init_node: node 0, pgdat c0534900, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 251 pages used for memmap [ 0.000000] HighMem zone: 31581 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @c1800000 s29016 r0 d24232 u2097152 [ 0.000000] pcpu-alloc: s29016 r0 d24232 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257030 [ 0.000000] Kernel command line: root=/dev/sda1 vga=0 log_bug_len=10M resume=/dev/sda2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f500) [ 0.000000] Memory: 1019776k/1037312k available (3001k kernel code, 16008k reserved, 1318k data, 308k init, 127328k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0539000 - 0xc0586000 ( 308 kB) [ 0.000000] .data : 0xc03ee787 - 0xc0538088 (1318 kB) [ 0.000000] .text : 0xc0100000 - 0xc03ee787 (3001 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1595.848 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.69 BogoMIPS (lpj=6383392) [ 0.004276] Mount-cache hash table entries: 512 [ 0.004615] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004773] CPU: L2 cache: 512K [ 0.004879] CPU: Physical Processor ID: 0 [ 0.004987] CPU: Processor Core ID: 0 [ 0.005095] mce: CPU supports 5 MCE banks [ 0.005213] CPU0: Thermal monitoring enabled (TM1) [ 0.005327] using mwait in idle threads. [ 0.005441] Performance Events: Atom events, Intel PMU driver. [ 0.005646] ... version: 3 [ 0.005752] ... bit width: 40 [ 0.005859] ... generic registers: 2 [ 0.005964] ... value mask: 000000ffffffffff [ 0.006074] ... max period: 000000007fffffff [ 0.006182] ... fixed-purpose events: 3 [ 0.006289] ... event mask: 0000000700000003 [ 0.008015] Checking 'hlt' instruction... OK. [ 0.024628] ACPI: Core revision 20090903 [ 0.040500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082219] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383862) [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.168105] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.169055] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172037] Brought up 2 CPUs [ 0.173196] Total of 2 processors activated (6383.62 BogoMIPS). [ 0.173493] CPU0 attaching sched-domain: [ 0.173503] domain 0: span 0-1 level SIBLING [ 0.173508] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.173521] domain 1: span 0-1 level CPU [ 0.173526] groups: 0-1 (cpu_power = 1178) [ 0.173537] CPU1 attaching sched-domain: [ 0.173542] domain 0: span 0-1 level SIBLING [ 0.173547] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.173558] domain 1: span 0-1 level CPU [ 0.173563] groups: 0-1 (cpu_power = 1178) [ 0.176384] NET: Registered protocol family 16 [ 0.176384] ACPI: bus type pci registered [ 0.176384] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176384] PCI: MCFG area at e0000000 reserved in E820 [ 0.176389] PCI: Using MMCONFIG for extended config space [ 0.176494] PCI: Using configuration type 1 for base access [ 0.184083] bio: create slab at 0 [ 0.193609] ACPI: EC: Look up EC in DSDT [ 0.198192] ACPI: Executed 1 blocks of module-level executable AML code [ 0.201473] ACPI: BIOS _OSI(Linux) query ignored [ 0.201756] ACPI: BIOS _OSI(Linux) query ignored [ 0.208318] ACPI: Interpreter enabled [ 0.208428] ACPI: (supports S0 S3 S4 S5) [ 0.208748] ACPI: Using IOAPIC for interrupt routing [ 0.220232] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.224126] ACPI: No dock devices found. [ 0.225526] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.225785] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013ca8), AE_ALREADY_EXISTS [ 0.226087] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.226371] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.226572] pci 0000:00:02.0: reg 10 32bit mmio: [0x58480000-0x584fffff] [ 0.226572] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7] [ 0.226572] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff] [ 0.226572] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58500000-0x5853ffff] [ 0.226572] pci 0000:00:02.1: reg 10 32bit mmio: [0x58400000-0x5847ffff] [ 0.226572] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58540000-0x58543fff] [ 0.226572] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.226572] pci 0000:00:1b.0: PME# disabled [ 0.226572] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.226572] pci 0000:00:1c.0: PME# disabled [ 0.226572] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.226572] pci 0000:00:1c.1: PME# disabled [ 0.226572] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.228013] pci 0000:00:1c.2: PME# disabled [ 0.228226] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.228338] pci 0000:00:1c.3: PME# disabled [ 0.228514] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f] [ 0.228593] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f] [ 0.228672] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f] [ 0.228751] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f] [ 0.228834] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58544400-0x585447ff] [ 0.228908] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.229020] pci 0000:00:1d.7: PME# disabled [ 0.229330] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.229496] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.229615] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) [ 0.229851] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.229863] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.229875] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.229887] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.229899] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af] [ 0.229943] pci 0000:00:1f.2: PME# supported from D3hot [ 0.230053] pci 0000:00:1f.2: PME# disabled [ 0.230223] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f] [ 0.230333] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff] [ 0.230342] pci 0000:00:1c.0: bridge 32bit mmio: [0x57300000-0x583fffff] [ 0.230354] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] [ 0.230534] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff] [ 0.230645] pci 0000:02:00.0: reg 18 64bit mmio pref: [0x51010000-0x51010fff] [ 0.230713] pci 0000:02:00.0: reg 20 64bit mmio pref: [0x51000000-0x5100ffff] [ 0.230755] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff] [ 0.230934] pci 0000:02:00.0: supports D1 D2 [ 0.230939] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.231061] pci 0000:02:00.0: PME# disabled [ 0.231681] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff] [ 0.231690] pci 0000:00:1c.1: bridge 32bit mmio: [0x56300000-0x572fffff] [ 0.231702] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x520fffff] [ 0.231866] pci 0000:03:00.0: reg 10 64bit mmio: [0x55200000-0x5520ffff] [ 0.232224] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.232520] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff] [ 0.232529] pci 0000:00:1c.2: bridge 32bit mmio: [0x55200000-0x562fffff] [ 0.232541] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52100000-0x530fffff] [ 0.232631] pci 0000:04:00.0: reg 10 32bit mmio: [0x54100300-0x541003ff] [ 0.232717] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xffff8000-0xffffffff] [ 0.232893] pci 0000:04:00.2: reg 10 32bit mmio: [0x54100200-0x541002ff] [ 0.233142] pci 0000:04:00.3: reg 10 32bit mmio: [0x54100100-0x541001ff] [ 0.233394] pci 0000:04:00.4: reg 10 32bit mmio: [0x54100000-0x541000ff] [ 0.240300] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff] [ 0.240310] pci 0000:00:1c.3: bridge 32bit mmio: [0x54100000-0x551fffff] [ 0.240323] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53100000-0x540fffff] [ 0.240404] pci 0000:00:1e.0: transparent bridge [ 0.240558] pci_bus 0000:00: on NUMA node 0 [ 0.240573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.240916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.241199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.241406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.241570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.241731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.242141] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.242396] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7013ca8), AE_ALREADY_EXISTS [ 0.252233] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.252983] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.253721] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.254464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.256392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.257268] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.258145] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.259017] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.260090] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.260212] vgaarb: loaded [ 0.260471] SCSI subsystem initialized [ 0.260471] libata version 3.00 loaded. [ 0.260471] usbcore: registered new interface driver usbfs [ 0.260471] usbcore: registered new interface driver hub [ 0.260471] usbcore: registered new device driver usb [ 0.260471] ACPI: WMI: Mapper loaded [ 0.260471] PCI: Using ACPI for IRQ routing [ 0.260478] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.260478] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.268075] Switching to clocksource tsc [ 0.268144] pnp: PnP ACPI init [ 0.268226] ACPI: bus type pnp registered [ 0.270276] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 7 (0x1000-0x1fff), disabling [ 0.272261] pnp: PnP ACPI: found 9 devices [ 0.272368] ACPI: ACPI bus type pnp unregistered [ 0.272497] system 00:01: ioport range 0x200-0x20f has been reserved [ 0.272609] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.272720] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.272829] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.272940] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.273049] system 00:01: ioport range 0x500-0x53f has been reserved [ 0.273163] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.273276] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.273389] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.273501] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.273613] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.273726] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.273887] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.318364] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.318536] pci 0000:04:00.0: BAR 6: no parent found for of device [0xffff8000-0xffffffff] [ 0.318764] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.318875] pci 0000:00:1c.0: IO window: 0x5000-0x5fff [ 0.318987] pci 0000:00:1c.0: MEM window: 0x57300000-0x583fffff [ 0.319098] pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff [ 0.319269] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.319379] pci 0000:00:1c.1: IO window: 0x3000-0x4fff [ 0.319490] pci 0000:00:1c.1: MEM window: 0x56300000-0x572fffff [ 0.319601] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x000000520fffff [ 0.319779] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.319889] pci 0000:00:1c.2: IO window: 0x2000-0x2fff [ 0.320000] pci 0000:00:1c.2: MEM window: 0x55200000-0x562fffff [ 0.320112] pci 0000:00:1c.2: PREFETCH window: 0x00000052100000-0x000000530fffff [ 0.320281] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.320391] pci 0000:00:1c.3: IO window: 0x1000-0x1fff [ 0.320503] pci 0000:00:1c.3: MEM window: 0x54100000-0x551fffff [ 0.320614] pci 0000:00:1c.3: PREFETCH window: 0x00000053100000-0x000000540fffff [ 0.320781] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.320888] pci 0000:00:1e.0: IO window: disabled [ 0.320997] pci 0000:00:1e.0: MEM window: disabled [ 0.321105] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.321237] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.321352] pci 0000:00:1c.0: setting latency timer to 64 [ 0.321372] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.321484] pci 0000:00:1c.1: setting latency timer to 64 [ 0.321503] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.321616] pci 0000:00:1c.2: setting latency timer to 64 [ 0.321635] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.321749] pci 0000:00:1c.3: setting latency timer to 64 [ 0.321762] pci 0000:00:1e.0: setting latency timer to 64 [ 0.321771] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.321777] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.321783] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] [ 0.321789] pci_bus 0000:01: resource 1 mem: [0x57300000-0x583fffff] [ 0.321795] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff] [ 0.321802] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff] [ 0.321807] pci_bus 0000:02: resource 1 mem: [0x56300000-0x572fffff] [ 0.321814] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x520fffff] [ 0.321820] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.321826] pci_bus 0000:03: resource 1 mem: [0x55200000-0x562fffff] [ 0.321832] pci_bus 0000:03: resource 2 pref mem [0x52100000-0x530fffff] [ 0.321838] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.321844] pci_bus 0000:04: resource 1 mem: [0x54100000-0x551fffff] [ 0.321850] pci_bus 0000:04: resource 2 pref mem [0x53100000-0x540fffff] [ 0.321856] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.321862] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.321937] NET: Registered protocol family 2 [ 0.322249] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.323045] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.324210] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.324806] TCP: Hash tables configured (established 131072 bind 65536) [ 0.324920] TCP reno registered [ 0.325211] NET: Registered protocol family 1 [ 0.325366] pci 0000:00:02.0: Boot video device [ 0.325672] PCI: CLS 0 bytes, default 32 [ 0.325949] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.326064] Simple Boot Flag at 0x44 set to 0x1 [ 0.327508] Scanning for low memory corruption every 60 seconds [ 0.328338] highmem bounce pool size: 64 pages [ 0.335022] msgmni has been set to 1743 [ 0.335411] alg: No test for stdrng (krng) [ 0.335891] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.336055] io scheduler noop registered [ 0.336158] io scheduler anticipatory registered [ 0.336262] io scheduler deadline registered [ 0.336510] io scheduler cfq registered (default) [ 0.336918] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.336936] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.337337] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.337355] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.337757] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.337773] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.338166] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.338182] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.346070] Non-volatile memory driver v1.3 [ 0.346182] Linux agpgart interface v0.103 [ 0.346315] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 0.346665] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.349502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 [ 0.349819] [drm] Initialized drm 1.1.0 20060810 [ 0.350161] ata_piix 0000:00:1f.2: version 2.13 [ 0.350191] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.350309] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.350659] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.350780] scsi0 : ata_piix [ 0.351158] scsi1 : ata_piix [ 0.353546] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14 [ 0.353665] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15 [ 0.353955] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.354258] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.354391] r8169 0000:02:00.0: PCI INT A disabled [ 0.354527] r8169: probe of 0000:02:00.0 failed with error -22 [ 0.354766] console [netcon0] enabled [ 0.354869] netconsole: network logging started [ 0.354975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.355117] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.355253] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.355260] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.355399] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.355605] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.359622] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400 [ 0.374504] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.374673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.374784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.374942] usb usb1: Product: EHCI Host Controller [ 0.375048] usb usb1: Manufacturer: Linux 2.6.32-rc6-00028-gac1aa47 ehci_hcd [ 0.375158] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.375463] usb usb1: configuration #1 chosen from 1 choice [ 0.376734] hub 1-0:1.0: USB hub found [ 0.376852] hub 1-0:1.0: 8 ports detected [ 0.377149] Initializing USB Mass Storage driver... [ 0.377350] usbcore: registered new interface driver usb-storage [ 0.377462] USB Mass Storage support registered. [ 0.377752] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 0.381644] i8042.c: Warning: Keylock active. [ 0.390820] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.396512] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.396628] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.396750] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.396870] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.396990] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.397322] mice: PS/2 mouse device common for all mice [ 0.397672] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.397822] rtc_cmos 00:03: RTC can wake from S4 [ 0.398064] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.398213] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.398400] cpuidle: using governor ladder [ 0.398517] cpuidle: using governor menu [ 0.398881] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 0.399622] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.399829] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.419913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.465181] ALSA device list: [ 0.465289] #0: HDA Intel at 0x58540000 irq 16 [ 0.466352] TCP cubic registered [ 0.466458] NET: Registered protocol family 17 [ 0.466611] Using IPI No-Shortcut mode [ 0.516493] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133 [ 0.516606] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.531258] ata1.00: configured for UDMA/133 [ 0.531569] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5 [ 0.532261] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.532551] sd 0:0:0:0: [sda] Write Protect is off [ 0.532658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.532720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.533182] sda: sda1 sda2 sda3 [ 0.579996] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.687763] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 1.029989] usb 1-5: New USB device found, idVendor=064e, idProduct=d101 [ 1.030104] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=4 [ 1.030218] usb 1-5: Product: Acer Crystal Eye webcam [ 1.030323] usb 1-5: Manufacturer: SuYin [ 1.030425] usb 1-5: SerialNumber: CN0316-M608-OV01-VA-R02.00.00 [ 1.030754] usb 1-5: configuration #1 chosen from 1 choice [ 2.564287] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000 [ 2.618996] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1 [ 3.062613] rtc_cmos 00:03: setting system clock to 2009-12-25 20:47:33 UTC (1261774053) [ 3.092335] kjournald starting. Commit interval 5 seconds [ 3.092347] EXT3-fs: mounted filesystem with writeback data mode. [ 3.092368] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 3.092672] Freeing unused kernel memory: 308k freed [ 5.399705] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.503012] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 5.503313] ACPI: Power Button [PWRB] [ 5.503579] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 5.504568] ACPI: Lid Switch [LID0] [ 5.504888] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 5.505183] ACPI: Sleep Button [SLPB] [ 5.505520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 5.505806] ACPI: Power Button [PWRF] [ 5.630321] ACPI: SSDT 3f380c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 5.632203] ACPI: SSDT 3f37fe10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 5.654392] ACPI: AC Adapter [ACAD] (off-line) [ 5.659572] Marking TSC unstable due to TSC halts in idle [ 5.660075] processor LNXCPU:00: registered as cooling_device0 [ 5.664827] ACPI: SSDT 3f380f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 5.670113] Switching to clocksource hpet [ 5.670833] ACPI: SSDT 3f37ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 5.674924] processor LNXCPU:01: registered as cooling_device1 [ 5.686908] ACPI: Battery Slot [BAT1] (battery present) [ 5.690473] uhci_hcd: USB Universal Host Controller Interface driver [ 5.692464] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.692656] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.692668] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.692923] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.693282] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080 [ 5.693743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.693907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.694136] usb usb2: Product: UHCI Host Controller [ 5.694244] usb usb2: Manufacturer: Linux 2.6.32-rc6-00028-gac1aa47 uhci_hcd [ 5.694355] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.695881] usb usb2: configuration #1 chosen from 1 choice [ 5.696407] hub 2-0:1.0: USB hub found [ 5.696550] hub 2-0:1.0: 2 ports detected [ 5.696849] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.696991] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.697003] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.697160] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.697404] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060 [ 5.697633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.697758] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.697935] usb usb3: Product: UHCI Host Controller [ 5.698049] usb usb3: Manufacturer: Linux 2.6.32-rc6-00028-gac1aa47 uhci_hcd [ 5.698174] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.699499] usb usb3: configuration #1 chosen from 1 choice [ 5.699760] hub 3-0:1.0: USB hub found [ 5.699898] hub 3-0:1.0: 2 ports detected [ 5.700244] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.700386] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.700397] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.700545] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.700792] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 5.701019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.701149] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.701329] usb usb4: Product: UHCI Host Controller [ 5.701446] usb usb4: Manufacturer: Linux 2.6.32-rc6-00028-gac1aa47 uhci_hcd [ 5.701568] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.701893] usb usb4: configuration #1 chosen from 1 choice [ 5.702130] hub 4-0:1.0: USB hub found [ 5.702266] hub 4-0:1.0: 2 ports detected [ 5.702547] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.702689] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.702701] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.702853] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.703105] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020 [ 5.703342] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.703469] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.703650] usb usb5: Product: UHCI Host Controller [ 5.703769] usb usb5: Manufacturer: Linux 2.6.32-rc6-00028-gac1aa47 uhci_hcd [ 5.703897] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.707856] usb usb5: configuration #1 chosen from 1 choice [ 5.708208] hub 5-0:1.0: USB hub found [ 5.708350] hub 5-0:1.0: 2 ports detected [ 5.762794] sdhci: Secure Digital Host Controller Interface driver [ 5.762929] sdhci: Copyright(c) Pierre Ossman [ 5.949840] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 5.950213] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [ 5.952340] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0) [ 5.952811] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5.954186] sdhci-pci 0000:04:00.0: setting latency timer to 64 [ 5.954321] Registered led device: mmc0:: [ 5.954562] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA [ 5.954924] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0) [ 5.955151] sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5.955347] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface. [ 5.955488] sdhci-pci 0000:04:00.2: PCI INT A disabled [ 6.203204] intel_rng: FWH not detected [ 6.675508] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 6.675839] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) [ 6.676483] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.807575] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 7.965662] EXT3 FS on sda1, internal journal [ 8.198176] loop: module loaded [ 8.304440] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 352.697417] kjournald starting. Commit interval 5 seconds [ 352.698078] EXT3 FS on sda3, internal journal [ 352.698263] EXT3-fs: mounted filesystem with writeback data mode. [ 357.264286] NET: Registered protocol family 10 [ 357.265576] lo: Disabled Privacy Extensions [ 363.671008] CPU0 attaching NULL sched-domain. [ 363.671028] CPU1 attaching NULL sched-domain. [ 363.688231] CPU0 attaching sched-domain: [ 363.688246] domain 0: span 0-1 level SIBLING [ 363.688258] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 363.688283] domain 1: span 0-1 level CPU [ 363.688294] groups: 0-1 (cpu_power = 1178) [ 363.688314] CPU1 attaching sched-domain: [ 363.688323] domain 0: span 0-1 level SIBLING [ 363.688333] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 363.688356] domain 1: span 0-1 level CPU [ 363.688366] groups: 0-1 (cpu_power = 1178) [ 376.740164] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 376.873017] usb 1-2: New USB device found, idVendor=0204, idProduct=6025 [ 376.873156] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 376.873290] usb 1-2: Product: USB 2.0 [ 376.873407] usb 1-2: Manufacturer: CHIPSBNK [ 376.873526] usb 1-2: SerialNumber: 0301450051F6BA00 [ 376.874229] usb 1-2: configuration #1 chosen from 1 choice [ 376.875203] scsi2 : SCSI emulation for USB Mass Storage devices [ 376.879379] usb-storage: device found at 3 [ 376.879394] usb-storage: waiting for device to settle before scanning [ 381.876416] usb-storage: device scan complete [ 381.877146] scsi 2:0:0:0: Direct-Access CHIPSBNK USB 2.0 5.00 PQ: 0 ANSI: 2 [ 381.892831] sd 2:0:0:0: [sdb] 2017280 512-byte logical blocks: (1.03 GB/985 MiB) [ 381.893691] sd 2:0:0:0: [sdb] Write Protect is off [ 381.893843] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 381.893858] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 381.896441] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 381.896607] sdb: sdb1 [ 381.901182] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 381.901346] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 382.741680] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!