Linux version 2.6.33-rc2-00001-g6d7daec (boris@liondog) (gcc version 4.4.2 (Debian 4.4.2-5) ) #1 SMP PREEMPT Sat Dec 26 09:32:52 CET 2009 Command line: root=/dev/sda1 vga=0 log_bug_len=10M resume=/dev/hda2 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable) BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data) BIOS-e820: 00000000cffbe000 - 00000000cffe0000 (ACPI NVS) BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) NX (Execute Disable) protection: active DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) No AGP bridge found last_pfn = 0x230000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000230000000 aka 8960M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcffb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cffb0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfe00000 page 2M 00cfe00000 - 00cffb0000 page 4k kernel direct mapping tables up to cffb0000 @ 16000-19000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0200000000 page 1G 0200000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ 18000-1a000 ACPI: RSDP 00000000000fa1e0 00014 (v00 ACPIAM) ACPI: RSDT 00000000cffb0000 0003C (v01 062909 OEMRSDT 20090629 MSFT 00000097) ACPI: FACP 00000000cffb0200 00084 (v02 062909 OEMFACP 20090629 MSFT 00000097) ACPI: DSDT 00000000cffb0440 09099 (v01 P0020 P0020000 00000000 INTL 20051117) ACPI: FACS 00000000cffbe000 00040 ACPI: APIC 00000000cffb0390 0006C (v01 062909 OEMAPIC 20090629 MSFT 00000097) ACPI: MCFG 00000000cffb0400 0003C (v01 062909 OEMMCFG 20090629 MSFT 00000097) ACPI: OEMB 00000000cffbe040 00071 (v01 062909 AMI_OEM 20090629 MSFT 00000097) ACPI: HPET 00000000cffb94e0 00038 (v01 062909 OEMHPET 20090629 MSFT 00000097) ACPI: SSDT 00000000cffb9520 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000223bca8] TEXT DATA BSS ==> [0001000000 - 000223bca8] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #3 [000223c000 - 000223c298] BRK ==> [000223c000 - 000223c298] #4 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] #5 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] #6 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000] #7 [0000018000 - 0000019000] PGTABLE ==> [0000018000 - 0000019000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffb0 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2096959 DMA zone: 56 pages used for memmap DMA zone: 107 pages reserved DMA zone: 3820 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833512 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000 PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000 PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000 PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880028200000 s83032 r8192 d23464 u524288 pcpu-alloc: s83032 r8192 d23464 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065492 Kernel command line: root=/dev/sda1 vga=0 log_bug_len=10M resume=/dev/hda2 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 8106620k/9175040k available (4027k kernel code, 787204k absent, 280260k reserved, 3241k data, 584k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 5855 kB per task-struct memory footprint: 1920 bytes hpet clockevent registered Fast TSC calibration using PIT Detected 3007.319 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6014.63 BogoMIPS (lpj=3007315) Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 17058 entries in 67 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02 System has AMD C1E enabled Switch to broadcast mode on CPU0 Testing tracer nop: PASSED lockdep: fixing up alternatives. Booting Node 0, Processors #1 Switch to broadcast mode on CPU1 lockdep: fixing up alternatives. #2 Switch to broadcast mode on CPU2 lockdep: fixing up alternatives. #3 Ok. Brought up 4 CPUs Switch to broadcast mode on CPU3 Total of 4 processors activated (24016.04 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffefffff] TOM2: 0000000230000000 aka 8960M bus: [00, 07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d0000000, dfffffff] bus: 00 index 3 mmio: [f0000000, ffffffff] bus: 00 index 4 mmio: [230000000, fcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 2 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI Warning: Incorrect checksum in table [OEMB] - 26, should be 1D (20091214/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfeaf0000-0xfeafffff 64bit] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfeaec000-0xfeaeffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:06.0: reg 10: [io 0xe800-0xe8ff] pci 0000:02:06.0: reg 14: [mem 0xfebffc00-0xfebffcff] pci 0000:02:06.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D1 D2 D3hot pci 0000:02:06.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cd1] has been reserved system 00:09: [io 0x0cd2-0x0cd3] has been reserved system 00:09: [io 0x0cd4-0x0cd5] has been reserved system 00:09: [io 0x0cd6-0x0cd7] has been reserved system 00:09: [io 0x0cd8-0x0cdf] has been reserved system 00:09: [io 0x0800-0x089f] has been reserved system 00:09: [io 0x0b00-0x0b3f] has been reserved system 00:09: [io 0x0900-0x090f] has been reserved system 00:09: [io 0x0910-0x091f] has been reserved system 00:09: [io 0xfe00-0xfefe] has been reserved system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved system 00:0c: [io 0x0e00-0x0e0f] has been reserved system 00:0c: [io 0x0e80-0x0e8f] has been reserved system 00:0c: [io 0x0f40-0x0f4f] has been reserved system 00:0c: [io 0x0a30-0x0a3f] has been reserved system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 02-02] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:14.4: bridge window [mem pref disabled] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:02: resource 3 [io 0x0000-0xffff] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 7, 524288 bytes) UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Testing tracer sched_switch: PASSED Testing tracer function: PASSED Testing dynamic ftrace: PASSED Testing tracer irqsoff: PASSED Testing tracer preemptoff: PASSED Testing tracer preemptirqsoff: PASSED Testing tracer wakeup: PASSED Testing tracer wakeup_rt: PASSED Testing tracer function_graph: PASSED HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 15963 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 ide1: BM-DMA at 0xff08-0xff0f Probing IDE interface ide0... hda: MAXTOR 4K080H4, ATA DISK drive hdb: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 ide-cd driver 5.00 ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22 8139too Fast Ethernet driver 0.9.28 8139too 0000:02:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth0: RealTek RTL8139 at 0xffffc90000048c00, 00:0b:2b:01:34:65, IRQ 21 console [netcon0] enabled netconsole: network logging started ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:00.1: setting latency timer to 64 ALSA device list: #0: HDA ATI SB at 0xfe9f4000 irq 16 #1: HDA ATI HDMI at 0xfeaec000 irq 19 TCP cubic registered Running tests on trace events: Testing event kfree_skb: OK Testing event skb_copy_datagram_iovec: OK Testing event lock_kernel: OK Testing event unlock_kernel: OK Testing event block_rq_abort: OK Testing event block_rq_requeue: OK Testing event block_rq_complete: OK Testing event block_rq_insert: OK Testing event block_rq_issue: OK Testing event block_bio_bounce: OK Testing event block_bio_complete: OK Testing event block_bio_backmerge: OK Testing event block_bio_frontmerge: OK Testing event block_bio_queue: OK Testing event block_getrq: OK Testing event block_sleeprq: OK Testing event block_plug: OK Testing event block_unplug_timer: OK Testing event block_unplug_io: OK Testing event block_split: OK Testing event block_remap: OK Testing event block_rq_remap: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) OK Testing event kfree: usb 1-2: new high speed USB device using ehci_hcd and address 2 OK Testing event kmem_cache_free: OK Testing event mm_page_free_direct: OK Testing event mm_pagevec_free: OK Testing event mm_page_alloc: OK Testing event mm_page_alloc_zone_locked: OK Testing event mm_page_pcpu_drain: OK Testing event mm_page_alloc_extfrag: OK Testing event power_start: OK Testing event power_frequency: OK Testing event power_end: OK Testing event module_load: OK Testing event module_free: OK Testing event module_get: usb 1-2: New USB device found, idVendor=0424, idProduct=2504 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2:1.0: USB hub found hub 1-2:1.0: 2 ports detected OK Testing event module_put: OK Testing event module_request: OK Testing event lock_acquire: ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata4: softreset failed (device not ready) ata4: applying SB600 PMP SRST workaround and retrying OK Testing event lock_release: OK Testing event workqueue_insertion: OK Testing event workqueue_execution: OK Testing event workqueue_creation: OK Testing event workqueue_destruction: OK Testing event signal_generate: OK Testing event signal_deliver: OK Testing event signal_overflow_fail: OK Testing event signal_lose_info: OK Testing event timer_init: OK Testing event timer_start: OK Testing event timer_expire_entry: OK Testing event timer_expire_exit: OK Testing event timer_cancel: OK Testing event hrtimer_init: OK Testing event hrtimer_start: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD2500AAJS-62B4A0, 01.03A01, max UDMA/133 ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 OK Testing event hrtimer_expire_entry: ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA scsi 1:0:0:0: Direct-Access ATA WDC WD2500AAJS-6 01.0 PQ: 0 ANSI: 5 OK Testing event hrtimer_expire_exit: sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata4.00: configured for UDMA/133 OK Testing event hrtimer_cancel: OK Testing event itimer_state: scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 3:0:0:0: [sdb] Attached SCSI disk OK Testing event itimer_expire: sda1 sda2 OK Testing event irq_handler_entry: OK Testing event irq_handler_exit: OK Testing event softirq_entry: sd 1:0:0:0: [sda] Attached SCSI disk OK Testing event softirq_exit: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_stat_wait: OK Testing event sched_stat_sleep: OK Testing event sched_stat_iowait: OK Testing event sched_stat_runtime: OK Testing event mce_record: OK Testing event sys_enter: OK Testing event sys_exit: OK Running tests on trace event systems: Testing event system skb: OK Testing event system bkl: OK Testing event system block: OK Testing event system kmem: OK Testing event system power: OK Testing event system module: OK Testing event system lock: OK Testing event system workqueue: OK Testing event system signal: OK Testing event system timer: OK Testing event system irq: OK Testing event system sched: OK Testing event system mce: OK Testing event system raw_syscalls: OK Testing event system syscalls: OK Running tests on all trace events: Testing all events: OK Running tests again, along with the function tracer Running tests on trace events: Testing event kfree_skb: OK Testing event skb_copy_datagram_iovec: OK Testing event lock_kernel: OK Testing event unlock_kernel: OK Testing event block_rq_abort: OK Testing event block_rq_requeue: OK Testing event block_rq_complete: OK Testing event block_rq_insert: OK Testing event block_rq_issue: OK Testing event block_bio_bounce: OK Testing event block_bio_complete: OK Testing event block_bio_backmerge: OK Testing event block_bio_frontmerge: OK Testing event block_bio_queue: OK Testing event block_getrq: OK Testing event block_sleeprq: OK Testing event block_plug: OK Testing event block_unplug_timer: OK Testing event block_unplug_io: OK Testing event block_split: OK Testing event block_remap: OK Testing event block_rq_remap: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event mm_page_free_direct: OK Testing event mm_pagevec_free: OK Testing event mm_page_alloc: OK Testing event mm_page_alloc_zone_locked: OK Testing event mm_page_pcpu_drain: OK Testing event mm_page_alloc_extfrag: OK Testing event power_start: OK Testing event power_frequency: OK Testing event power_end: OK Testing event module_load: OK Testing event module_free: OK Testing event module_get: OK Testing event module_put: OK Testing event module_request: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event workqueue_insertion: OK Testing event workqueue_execution: OK Testing event workqueue_creation: OK Testing event workqueue_destruction: OK Testing event signal_generate: OK Testing event signal_deliver: OK Testing event signal_overflow_fail: OK Testing event signal_lose_info: OK Testing event timer_init: OK Testing event timer_start: OK Testing event timer_expire_entry: OK Testing event timer_expire_exit: OK Testing event timer_cancel: OK Testing event hrtimer_init: OK Testing event hrtimer_start: OK Testing event hrtimer_expire_entry: OK Testing event hrtimer_expire_exit: OK Testing event hrtimer_cancel: OK Testing event itimer_state: OK Testing event itimer_expire: OK Testing event irq_handler_entry: OK Testing event irq_handler_exit: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_stat_wait: OK Testing event sched_stat_sleep: OK Testing event sched_stat_iowait: OK Testing event sched_stat_runtime: OK Testing event mce_record: OK Testing event sys_enter: OK Testing event sys_exit: OK Running tests on trace event systems: Testing event system skb: OK Testing event system bkl: OK Testing event system block: OK Testing event system kmem: OK Testing event system power: OK Testing event system module: OK Testing event system lock: OK Testing event system workqueue: OK Testing event system signal: OK Testing event system timer: OK Testing event system irq: OK Testing event system sched: OK Testing event system mce: OK Testing event system raw_syscalls: OK Testing event system syscalls: OK Running tests on all trace events: Testing all events: OK rtc_cmos 00:03: setting system clock to 2009-12-26 10:11:59 UTC (1261822319) EXT3-fs (sda1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 584k freed kjournald starting. Commit interval 5 seconds EDAC MC: Ver: 2.1.0 Dec 26 2009 EDAC amd64_edac: Ver: 3.3.0 Dec 26 2009 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000 input: PC Speaker as /devices/platform/pcspkr/input/input1 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.33-rc2-00001-g6d7daec ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 4-1: new low speed USB device using ohci_hcd and address 2 usb 4-1: New USB device found, idVendor=046d, idProduct=c018 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB Optical Mouse usb 4-1: Manufacturer: Logitech input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2 generic-usb 0003:046D:C018.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-1/input0 Adding 16016796k swap on /dev/sda2. Priority:-1 extents:1 across:16016796k Adding 15647300k swap on /dev/hda2. Priority:-2 extents:1 across:15647300k EXT3-fs (sda1): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sdb1): using internal journal EXT3-fs (sdb1): mounted filesystem with writeback data mode eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (3000 MHz) powernow-k8: 1 : pstate 1 (2300 MHz) powernow-k8: 2 : pstate 2 (1800 MHz) powernow-k8: 3 : pstate 3 (800 MHz) kvm: Nested Virtualization enabled kvm: Nested Paging enabled eth0: no IPv6 routers present PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 82565 pages) PM: Allocated 330260 kbytes in 0.16 seconds (2064.12 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 3:0:0:0: [sdb] Synchronizing SCSI cache sd 1:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! serial 00:0b: disabled HDA Intel 0000:01:00.1: PCI INT B disabled ACPI handle has no context! pci 0000:01:00.0: PCI INT A disabled HDA Intel 0000:00:14.2: PCI INT A disabled ATIIXP_IDE 0000:00:14.1: PCI INT A disabled ahci 0000:00:11.0: PCI INT A disabled PM: freeze of devices complete after 284.320 msecs PM: late freeze of devices complete after 1.633 msecs Disabling non-boot CPUs ... CPU 1 is now offline Task events/1 (pid = 16) is on cpu 1 (state = 1, flags = 84208040) Task kblockd/1 (pid = 161) is on cpu 1 (state = 1, flags = 84208040) Task ksuspend_usbd (pid = 275) is on cpu 1 (state = 2, flags = 80214040) Task khungtaskd (pid = 365) is on cpu 1 (state = 1, flags = 80208040) Task kswapd0 (pid = 424) is on cpu 1 (state = 2, flags = 80a54840) Task kjournald (pid = 940) is on cpu 1 (state = 1, flags = 80208040) Task udevd (pid = 1140) is on cpu 1 (state = 2, flags = 416140) Task udevd (pid = 1141) is on cpu 1 (state = 2, flags = 416140) Task kondemand/1 (pid = 2165) is on cpu 1 (state = 1, flags = 84208040) Task syslogd (pid = 2194) is on cpu 1 (state = 2, flags = 416140) Task sshd (pid = 2228) is on cpu 1 (state = 2, flags = 416140) Task dictd (pid = 2252) is on cpu 1 (state = 2, flags = 416040) Task xfs (pid = 2399) is on cpu 1 (state = 2, flags = 416140) Task hald-addon-inpu (pid = 2552) is on cpu 1 (state = 2, flags = 416000) Task hald-addon-cpuf (pid = 2554) is on cpu 1 (state = 2, flags = 416000) Task cupsd (pid = 2572) is on cpu 1 (state = 2, flags = 416100) Task getty (pid = 2668) is on cpu 1 (state = 2, flags = 416000) Task getty (pid = 2669) is on cpu 1 (state = 2, flags = 416000) CPU 2 is now offline Task init (pid = 1) is on cpu 2 (state = 2, flags = 416100) Task kthreadd (pid = 2) is on cpu 2 (state = 1, flags = 80208040) Task events/2 (pid = 17) is on cpu 2 (state = 1, flags = 84208040) Task khelper (pid = 19) is on cpu 2 (state = 1, flags = 80208040) Task kblockd/2 (pid = 162) is on cpu 2 (state = 1, flags = 84208040) Task udevd (pid = 986) is on cpu 2 (state = 2, flags = 416140) Task kondemand/2 (pid = 2166) is on cpu 2 (state = 1, flags = 84208040) Task pickup (pid = 2374) is on cpu 2 (state = 2, flags = 416100) Task qmgr (pid = 2375) is on cpu 2 (state = 2, flags = 416100) Task hald (pid = 2412) is on cpu 2 (state = 2, flags = 416140) Task console-kit-dae (pid = 2415) is on cpu 2 (state = 2, flags = 416140) Task hald-runner (pid = 2478) is on cpu 2 (state = 2, flags = 416000) Task hald-addon-stor (pid = 2553) is on cpu 2 (state = 2, flags = 416000) Task atd (pid = 2607) is on cpu 2 (state = 2, flags = 416040) Task cron (pid = 2627) is on cpu 2 (state = 2, flags = 416040) Task getty (pid = 2667) is on cpu 2 (state = 2, flags = 416000) Task kstop/2 (pid = 2909) is on cpu 2 (state = 1, flags = 84208040) CPU 3 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code Task events/3 (pid = 18) is on cpu 3 (state = 1, flags = 84208040) Task bdi-default (pid = 158) is on cpu 3 (state = 2, flags = 80a15040) Task kblockd/3 (pid = 163) is on cpu 3 (state = 1, flags = 84208040) Task kondemand/3 (pid = 2167) is on cpu 3 (state = 1, flags = 84208040) Task klogd (pid = 2203) is on cpu 3 (state = 2, flags = 416140) Task dbus-daemon (pid = 2214) is on cpu 3 (state = 2, flags = 416140) Task flush-8:16 (pid = 2224) is on cpu 3 (state = 2, flags = 80a15040) Task master (pid = 2367) is on cpu 3 (state = 2, flags = 416100) Task uml_switch (pid = 2384) is on cpu 3 (state = 2, flags = 416100) Task login (pid = 2665) is on cpu 3 (state = 2, flags = 416100) Task getty (pid = 2666) is on cpu 3 (state = 2, flags = 416000) Task bash (pid = 2685) is on cpu 3 (state = 2, flags = 416100) Task kstop/3 (pid = 2910) is on cpu 3 (state = 1, flags = 84208040) PM: Creating hibernation image: PM: Need to copy 81504 pages PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 Switch to broadcast mode on CPU1 CPU1 is up lockdep: fixing up alternatives. Booting Node 0 Processor 2 APIC 0x2 Switch to broadcast mode on CPU2 CPU2 is up lockdep: fixing up alternatives. Booting Node 0 Processor 3 APIC 0x3 Switch to broadcast mode on CPU3 CPU3 is up ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300103, writing 0x2300107) ATIIXP_IDE 0000:00:14.1: restoring config space at offset 0x1 (was 0x2300001, writing 0x2300005) pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x40100103, writing 0x100103) HDA Intel 0000:01:00.1: BAR 0: set to [mem 0xfeaec000-0xfeaeffff 64bit] (PCI address [0xfeaec000-0xfeaeffff] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x40100103, writing 0x100103) PM: early restore of devices complete after 13.507 msecs ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb1: root hub lost power or was reset usb usb5: root hub lost power or was reset usb usb6: root hub lost power or was reset usb usb2: root hub lost power or was reset ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ATIIXP_IDE 0000:00:14.1: setting latency timer to 64 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usb usb7: root hub lost power or was reset pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:00.1: setting latency timer to 64 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 serial 00:0b: activated hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected ata2: softreset failed (device not ready) ata4: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata4: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: configured for UDMA/133 ata4.00: configured for UDMA/133 sd 1:0:0:0: [sda] Starting disk sd 3:0:0:0: [sdb] Starting disk usb 4-1: reset low speed USB device using ohci_hcd and address 2 PM: restore of devices complete after 1694.099 msecs Restarting tasks ... done. usb 1-2: reset high speed USB device using ehci_hcd and address 2 ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x107/0x121() Hardware name: System Product Name sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat 8250_pnp 8250 pcspkr serial_core ohci_hcd k10temp edac_core Pid: 279, comm: khubd Not tainted 2.6.33-rc2-00001-g6d7daec #1 Call Trace: [] warn_slowpath_common+0x7c/0x94 [] warn_slowpath_fmt+0x41/0x43 [] sysfs_add_one+0x107/0x121 [] ? kobject_add_internal+0x9e/0x1a0 [] create_dir+0x5d/0x98 [] sysfs_create_dir+0x3d/0x50 [] ? _raw_spin_unlock+0x35/0x52 [] kobject_add_internal+0xdf/0x1a0 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] ? kobject_get+0x1a/0x22 [] device_add+0xad/0x4e6 [] ? __raw_spin_lock_init+0x31/0x52 [] device_register+0x1e/0x22 [] usb_create_ep_devs+0xfd/0x127 [] create_intf_ep_devs+0x50/0x6c [] usb_set_interface+0x228/0x23a [] ? _raw_spin_unlock_irqrestore+0x5b/0x79 [] usb_reset_and_verify_device+0x412/0x497 [] usb_port_resume+0x164/0x25b [] ? mutex_unlock+0xe/0x10 [] generic_resume+0x1c/0x1e [] usb_resume_device+0x3a/0x3c [] usb_resume_both+0x70/0x10a [] usb_external_resume_device+0x39/0x77 [] hub_thread+0x4eb/0xfc6 [] ? _raw_spin_unlock_irq+0x41/0x5e [] ? autoremove_wake_function+0x0/0x39 [] ? _raw_spin_unlock_irqrestore+0x5b/0x79 [] ? hub_thread+0x0/0xfc6 [] kthread+0x7f/0x87 [] kernel_thread_helper+0x4/0x10 [] ? _raw_spin_unlock_irq+0x41/0x5e [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x87 [] ? kernel_thread_helper+0x0/0x10 ---[ end trace 044a12284a40512a ]--- kobject_add_internal failed for ep_81 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 279, comm: khubd Tainted: G W 2.6.33-rc2-00001-g6d7daec #1 Call Trace: [] kobject_add_internal+0x171/0x1a0 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] ? kobject_get+0x1a/0x22 [] device_add+0xad/0x4e6 [] ? __raw_spin_lock_init+0x31/0x52 [] device_register+0x1e/0x22 [] usb_create_ep_devs+0xfd/0x127 [] create_intf_ep_devs+0x50/0x6c [] usb_set_interface+0x228/0x23a [] ? _raw_spin_unlock_irqrestore+0x5b/0x79 [] usb_reset_and_verify_device+0x412/0x497 [] usb_port_resume+0x164/0x25b [] ? mutex_unlock+0xe/0x10 [] generic_resume+0x1c/0x1e [] usb_resume_device+0x3a/0x3c [] usb_resume_both+0x70/0x10a [] usb_external_resume_device+0x39/0x77 [] hub_thread+0x4eb/0xfc6 [] ? _raw_spin_unlock_irq+0x41/0x5e [] ? autoremove_wake_function+0x0/0x39 [] ? _raw_spin_unlock_irqrestore+0x5b/0x79 [] ? hub_thread+0x0/0xfc6 [] kthread+0x7f/0x87 [] kernel_thread_helper+0x4/0x10 [] ? _raw_spin_unlock_irq+0x41/0x5e [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x87 [] ? kernel_thread_helper+0x0/0x10 ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.33-rc2-00001-g6d7daec #1 ------------------------------------------------------- Xorg/3076 is trying to acquire lock: (&dev->struct_mutex){+.+.+.}, at: [] drm_mmap+0x38/0x5c but task is already holding lock: (&mm->mmap_sem){++++++}, at: [] sys_mmap_pgoff+0xd6/0x1b4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){++++++}: [] __lock_acquire+0x1373/0x16fd [] lock_acquire+0xf2/0x116 [] might_fault+0x95/0xb8 [] filldir+0x75/0xd0 [] sysfs_readdir+0x10f/0x149 [] vfs_readdir+0x6b/0xa8 [] sys_getdents+0x81/0xd1 [] system_call_fastpath+0x16/0x1b -> #2 (sysfs_mutex){+.+.+.}: [] __lock_acquire+0x1373/0x16fd [] lock_acquire+0xf2/0x116 [] mutex_lock_nested+0x63/0x354 [] sysfs_addrm_start+0x26/0x28 [] sysfs_remove_dir+0x52/0x8d [] kobject_del+0x16/0x37 [] kobject_release+0x3e/0x66 [] kref_put+0x43/0x4d [] kobject_put+0x47/0x4b [] cacheinfo_cpu_callback+0xa2/0xdb [] notifier_call_chain+0x37/0x63 [] raw_notifier_call_chain+0x14/0x16 [] _cpu_down+0x1a5/0x29a [] disable_nonboot_cpus+0x74/0x10d [] hibernation_snapshot+0x99/0x1d3 [] hibernate+0xce/0x172 [] state_store+0x5c/0xd3 [] kobj_attr_store+0x17/0x19 [] sysfs_write_file+0x108/0x144 [] vfs_write+0xb2/0x153 [] sys_write+0x4a/0x71 [] system_call_fastpath+0x16/0x1b -> #1 (cpu_hotplug.lock){+.+.+.}: [] __lock_acquire+0x1373/0x16fd [] lock_acquire+0xf2/0x116 [] mutex_lock_nested+0x63/0x354 [] get_online_cpus+0x3c/0x50 [] mtrr_del_page+0x3e/0x13c [] mtrr_del+0x47/0x4f [] drm_rmmap_locked+0xdc/0x1a2 [] drm_master_destroy+0x86/0x11f [] kref_put+0x43/0x4d [] drm_master_put+0x20/0x2b [] drm_release+0x54b/0x688 [] __fput+0x125/0x1e7 [] fput+0x1a/0x1c [] filp_close+0x5d/0x67 [] sys_close+0xad/0xe7 [] system_call_fastpath+0x16/0x1b -> #0 (&dev->struct_mutex){+.+.+.}: [] __lock_acquire+0x1023/0x16fd [] lock_acquire+0xf2/0x116 [] mutex_lock_nested+0x63/0x354 [] drm_mmap+0x38/0x5c [] mmap_region+0x2e0/0x4ff [] do_mmap_pgoff+0x290/0x2f3 [] sys_mmap_pgoff+0xf6/0x1b4 [] sys_mmap+0x22/0x27 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: 1 lock held by Xorg/3076: #0: (&mm->mmap_sem){++++++}, at: [] sys_mmap_pgoff+0xd6/0x1b4 stack backtrace: Pid: 3076, comm: Xorg Tainted: G W 2.6.33-rc2-00001-g6d7daec #1 Call Trace: [] print_circular_bug+0xae/0xbd [] __lock_acquire+0x1023/0x16fd [] ? drm_mmap+0x38/0x5c [] lock_acquire+0xf2/0x116 [] ? drm_mmap+0x38/0x5c [] ? drm_mmap+0x38/0x5c [] ? drm_mmap+0x38/0x5c [] mutex_lock_nested+0x63/0x354 [] ? drm_mmap+0x38/0x5c [] ? mark_held_locks+0x52/0x70 [] ? kmem_cache_alloc+0xc2/0x168 [] ? mmap_region+0x23d/0x4ff [] ? trace_hardirqs_on_caller+0x11d/0x141 [] drm_mmap+0x38/0x5c [] ? __down_write_nested+0x1c/0xcc [] mmap_region+0x2e0/0x4ff [] do_mmap_pgoff+0x290/0x2f3 [] sys_mmap_pgoff+0xf6/0x1b4 [] ? trace_hardirqs_on_caller+0x11d/0x141 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] sys_mmap+0x22/0x27 [] system_call_fastpath+0x16/0x1b [drm] Setting GART location based on new memory map [drm] Loading RV635 CP Microcode platform r600_cp.0: firmware: using built-in firmware radeon/RV635_pfp.bin platform r600_cp.0: firmware: using built-in firmware radeon/RV635_me.bin [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs