| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <004401ca87ca$da08e500$8e1aaf00$@name>
Date: Mon, 28 Dec 2009 15:34:23 +0100
From: Milan Dadok <milan@...ok.name>
To: <kaber@...sh.net>, <uaca@...ate.spam.alumni.uv.es>,
<johann.baudy@...-log.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: [PATCH] 0/1 net: packet: Keep 802.1Q VLAN tag in packet on SOCK_DGRAM socket
Hi all,
I found next bug in af_socket.c during testing why
tcpdump -i any -env
don't show correctly outgoing 802.1Q packet
Vanilla kernel 2.6.31 display something like that
14:45:51.237238 Out 00:1b:21:xx:xx:xx ethertype Unknown (0x0033), length 72:
In function tpacket_rcv (and packet_rcv - I don't patch that for now) there
is comment
/* Special case: outgoing packets have ll header at head */
skb_pull(skb, skb_network_offset(skb))
Normally that is true, but on physical network card with no hw vlan
acceleration ll header contains VLAN tag too, added by upper dev in
vlan_dev.c.
So we must remove only ll header of current physical dev, not bytes added by
upper dev (ie. vlan_dev.c)
With more nested vlan devices it is going to be more complicated.
hard_header_len network_offset must leave from
ll header
vlan1099@...n1010 26 14 0 = 14 - 14 = 26 -
(26-22) - (22-18) - (18-14)
vlan1010@...n10 22 18 1x8021Q 4 = 18 - 14 = 22 -
(22-18) - (18-14)
vlan10@...1 18 22 2x8021Q 8 = 22 - 14 = 18 -
(18-14)
eth1 14 26 3x8021Q 12 = 26 - 14
Next patch don't look nicely and need more work (move is_vlan_dev to another
.h, support another encapsulation, non ETH devices etc.), but it is working
for me.
There may be another solution of this too.
tcpdump -env -i any 'host 192.168.101.11 or (vlan and host 192.168.101.11)'
15:14:47.103377 In 00:1b:21:xx:xx:xx ethertype 802.1Q (0x8100), length 80:
vlan 51, p 0, ethertype IPv4, 77.75.72.3 > 192.168.101.11: ICMP echo reply,
id 512, seq 28192, length 40
15:14:47.103377 In 00:1b:21:xx:xx:xx ethertype IPv4 (0x0800), length 76:
77.75.72.3 > 192.168.101.11: ICMP echo reply, id 512, seq 28192, length 40
15:14:47.103398 Out 00:0a:5e:xx:xx:xx ethertype IPv4 (0x0800), length 76:
77.75.72.3 > 192.168.101.11: ICMP echo reply, id 512, seq 28192, length 40
15:14:47.103406 Out 00:0a:5e:xx:xx:xx ethertype 802.1Q (0x8100), length 80:
vlan 10, p 0, ethertype IPv4, 77.75.72.3 > 192.168.101.11: ICMP echo reply,
id 512, seq 28192, length 40
I tested it on vlan1010@...n10 interface too.
Milan
PS. to fully support VLAN in tcpdump I made next patches to libpcap, I'm
going to send it to tcpdump maintainer.
(any comments on 'kernel filter don't have access to skb VLAN TCI field'?)
Patch to libpcap
This patch is for tcpdump correclly filter and display VLAN encapsulated
packet.
My testing configuration was
eth0 - hw vlan accelerated network card
eth1 - no hw vlan accelerated network card
many vlan1,vlan51
These command now works correctlly
tcpdump -env -i eth0 not vlan
tcpdump -env -i eth1 not vlan
tcpdump -env -i eth0 vlan 51
tcpdump -env -i eth1 vlan 51
tcpdump -env -i any vlan 51
tcpdump -env -i any
tcpdump -env -i any 'host 192.168.111.11 or (vlan and host 192.168.111.11)'
that works too - it show correctly 1 routed packet on 4 interfaces (in
eth0,in vlan1,out vlan2,out eth1)
(vconfig set_flag 1 1 on all vlans)
Solved bugs
- on any interface 802.1Q packet from hw vlan accelerated card (in,out) was
not displayed correctly
because SLL header does not have same len as MAC header (!= 2 * ETH_ALEN)
- userland filter was run before sll and 802.1Q packet restoring, but
offsets in filter was counted
with sll and 802.1Q headers already in packet
- if filter have vlan condition, filter must be in userland, because kernel
filter don't have access to skb VLAN TCI field
- There must be one kernel patch applied to kernel 2.6.32 for correctly
display and filter 802.1q packet on any interface
diff -urpN pcap-linux.c.orig pcap-linux.c
--- pcap-linux.c.orig 2009-12-26 10:56:30.000000000 +0100
+++ pcap-linux.c 2009-12-28 15:11:38.000000000 +0100
@@ -1933,6 +1933,7 @@ pcap_setfilter_linux_common(pcap_t *hand
return -1;
#endif /* SO_ATTACH_FILTER */
+ printf("Using %s filter\n", handle->md.use_bpf?"kernel":"userland");
return 0;
}
@@ -3072,23 +3073,6 @@ pcap_read_linux_mmap(pcap_t *handle, int
return -1;
}
- /* run filter on received packet
- * If the kernel filtering is enabled we need to run the
- * filter until all the frames present into the ring
- * at filter creation time are processed.
- * In such case md.use_bpf is used as a counter for the
- * packet we need to filter.
- * Note: alternatively it could be possible to stop applying
- * the filter when the ring became empty, but it can
possibly
- * happen a lot later... */
- bp = (unsigned char*)h.raw + tp_mac;
- run_bpf = (!handle->md.use_bpf) ||
- ((handle->md.use_bpf>1) && handle->md.use_bpf--);
- if (run_bpf && handle->fcode.bf_insns &&
- (bpf_filter(handle->fcode.bf_insns, bp,
- tp_len, tp_snaplen) == 0))
- goto skip;
-
/*
* Do checks based on packet direction.
*/
@@ -3117,11 +3101,7 @@ pcap_read_linux_mmap(pcap_t *handle, int
goto skip;
}
- /* get required packet info from ring header */
- pcaphdr.ts.tv_sec = tp_sec;
- pcaphdr.ts.tv_usec = tp_usec;
- pcaphdr.caplen = tp_snaplen;
- pcaphdr.len = tp_len;
+ bp = (unsigned char*)h.raw + tp_mac;
/* if required build in place the sll header*/
if (handle->md.cooked) {
@@ -3163,27 +3143,58 @@ pcap_read_linux_mmap(pcap_t *handle, int
hdrp->sll_protocol = sll->sll_protocol;
/* update packet len */
- pcaphdr.caplen += SLL_HDR_LEN;
- pcaphdr.len += SLL_HDR_LEN;
+ tp_snaplen += SLL_HDR_LEN;
+ tp_len += SLL_HDR_LEN;
}
#ifdef HAVE_TPACKET2
- if (handle->md.tp_version == TPACKET_V2 && h.h2->tp_vlan_tci
&&
- tp_snaplen >= 2 * ETH_ALEN) {
+ /*
+ * Add VLAN TAG if set in TPACKET2
+ */
+ if (handle->md.tp_version == TPACKET_V2 &&
(h.h2->tp_vlan_tci)) {
struct vlan_tag *tag;
+ int ethlen;
bp -= VLAN_TAG_LEN;
- memmove(bp, bp + VLAN_TAG_LEN, 2 * ETH_ALEN);
- tag = (struct vlan_tag *)(bp + 2 * ETH_ALEN);
+ if (!handle->md.cooked) {
+ ethlen = 2 * ETH_ALEN;
+ } else {
+ ethlen = sizeof(struct sll_header) -
sizeof(sll->sll_protocol);
+ }
+ memmove(bp, bp + VLAN_TAG_LEN, ethlen);
+ tag = (struct vlan_tag *)(bp + ethlen);
+
tag->vlan_tpid = htons(ETH_P_8021Q);
tag->vlan_tci = htons(h.h2->tp_vlan_tci);
- pcaphdr.caplen += VLAN_TAG_LEN;
- pcaphdr.len += VLAN_TAG_LEN;
+ tp_snaplen += VLAN_TAG_LEN;
+ tp_len += VLAN_TAG_LEN;
}
#endif
+ /* run filter on received packet
+ * If the kernel filtering is enabled we need to run the
+ * filter until all the frames present into the ring
+ * at filter creation time are processed.
+ * In such case md.use_bpf is used as a counter for the
+ * packet we need to filter.
+ * Note: alternatively it could be possible to stop applying
+ * the filter when the ring became empty, but it can
possibly
+ * happen a lot later... */
+ run_bpf = (!handle->md.use_bpf) ||
+ ((handle->md.use_bpf>1) && handle->md.use_bpf--);
+ if (run_bpf && handle->fcode.bf_insns &&
+ (bpf_filter(handle->fcode.bf_insns, bp,
+ tp_len, tp_snaplen) == 0))
+ goto skip;
+
+ /* get required packet info from ring header */
+ pcaphdr.ts.tv_sec = tp_sec;
+ pcaphdr.ts.tv_usec = tp_usec;
+ pcaphdr.caplen = tp_snaplen;
+ pcaphdr.len = tp_len;
+
/*
* The only way to tell the kernel to cut off the
* packet at a snapshot length is with a filter program;
@@ -4270,6 +4281,7 @@ iface_get_arptype(int fd, const char *de
}
#ifdef SO_ATTACH_FILTER
+static u_int orig_nl;
static int
fix_program(pcap_t *handle, struct sock_fprog *fcode, int is_mmapped)
{
@@ -4295,6 +4307,13 @@ fix_program(pcap_t *handle, struct sock_
fcode->len = len;
fcode->filter = (struct sock_filter *) f;
+ /*
+ * Is filter testing some encapsulated packets - VLAN, MPLS?
+ * put to userland after encapsulated packet is restored from TCI
+ */
+ if (handle->md.tp_version == TPACKET_V2 && orig_nl!=-1U)
+ return 0;
+
for (i = 0; i < len; ++i) {
p = &f[i];
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists