| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 06 Jan 2010 12:02:12 -0500
From: James Bottomley <James.Bottomley@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PATCH] SCSI bug fixes for 2.6.33-rc3
This patch represents the accumulated bug fixes in a variety of drivers,
with concentrated bug fix updates for emulex NPIV and qla2xxx EEH.
The patch is available at:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is
Andrew Vasquez (1):
qla2xxx: Extend base EEH support in qla2xxx.
Anil Ravindranath (1):
pmcraid: fix to avoid twice scsi_dma_unmap for a command
Anirban Chakraborty (1):
qla2xxx: Fix for a multiqueue bug in CPU affinity mode
Duane Grigsby (1):
qla2xxx: Added to EEH support.
Ed Lin (1):
stex: fix scan of nonexistent lun
Giridhar Malavali (1):
qla2xxx: Update version number to 8.03.01-k9.
James Smart (6):
lpfc 8.3.7: Update Driver version to 8.3.7
lpfc 8.3.7: Fix discovery failures.
lpfc 8.3.7: Fix SCSI protocol related errors.
lpfc 8.3.7: Fix hardware/SLI relates issues
lpfc 8.3.7: Fix NPIV operation errors
lpfc 8.3.7: Fix FC protocol errors
Michael Hernandez (1):
qla2xxx: Get the link data rate explicitly during device resync.
Rakesh Ranjan (1):
cxgb3i: Fix a login over vlan issue
the diffstat
drivers/scsi/cxgb3i/cxgb3i_offload.c | 34 ++++++++++++-
drivers/scsi/lpfc/lpfc_els.c | 4 -
drivers/scsi/lpfc/lpfc_hbadisc.c | 25 ++++++++-
drivers/scsi/lpfc/lpfc_hw4.h | 3 -
drivers/scsi/lpfc/lpfc_init.c | 14 ++++-
drivers/scsi/lpfc/lpfc_sli.c | 48 +++++++++++-------
drivers/scsi/lpfc/lpfc_sli4.h | 2
drivers/scsi/lpfc/lpfc_version.h | 2
drivers/scsi/lpfc/lpfc_vport.c | 4 +
drivers/scsi/pmcraid.c | 8 +--
drivers/scsi/qla2xxx/qla_attr.c | 32 ++++++++++--
drivers/scsi/qla2xxx/qla_dbg.h | 9 +++
drivers/scsi/qla2xxx/qla_def.h | 2
drivers/scsi/qla2xxx/qla_gbl.h | 1
drivers/scsi/qla2xxx/qla_init.c | 22 ++++++++
drivers/scsi/qla2xxx/qla_isr.c | 9 ++-
drivers/scsi/qla2xxx/qla_mbx.c | 64 +++++++++++++++++++++++-
drivers/scsi/qla2xxx/qla_mid.c | 2
drivers/scsi/qla2xxx/qla_os.c | 90 +++++++++++++++++++++++++++++++----
drivers/scsi/qla2xxx/qla_version.h | 2
drivers/scsi/stex.c | 5 +
21 files changed, 322 insertions(+), 60 deletions(-)
Entire diff is below.
James
---
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 26ffdcd..15a00e8 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1440,6 +1440,10 @@ void cxgb3i_c3cn_release(struct s3_conn *c3cn)
static int is_cxgb3_dev(struct net_device *dev)
{
struct cxgb3i_sdev_data *cdata;
+ struct net_device *ndev = dev;
+
+ if (dev->priv_flags & IFF_802_1Q_VLAN)
+ ndev = vlan_dev_real_dev(dev);
write_lock(&cdata_rwlock);
list_for_each_entry(cdata, &cdata_list, list) {
@@ -1447,7 +1451,7 @@ static int is_cxgb3_dev(struct net_device *dev)
int i;
for (i = 0; i < ports->nports; i++)
- if (dev == ports->lldevs[i]) {
+ if (ndev == ports->lldevs[i]) {
write_unlock(&cdata_rwlock);
return 1;
}
@@ -1566,6 +1570,26 @@ out_err:
return -EINVAL;
}
+/**
+ * cxgb3i_find_dev - find the interface associated with the given address
+ * @ipaddr: ip address
+ */
+static struct net_device *
+cxgb3i_find_dev(struct net_device *dev, __be32 ipaddr)
+{
+ struct flowi fl;
+ int err;
+ struct rtable *rt;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.nl_u.ip4_u.daddr = ipaddr;
+
+ err = ip_route_output_key(dev ? dev_net(dev) : &init_net, &rt, &fl);
+ if (!err)
+ return (&rt->u.dst)->dev;
+
+ return NULL;
+}
/**
* cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address
@@ -1581,6 +1605,7 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
struct cxgb3i_sdev_data *cdata;
struct t3cdev *cdev;
__be32 sipv4;
+ struct net_device *dstdev;
int err;
c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
@@ -1591,6 +1616,13 @@ int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
c3cn->daddr.sin_port = usin->sin_port;
c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
+ dstdev = cxgb3i_find_dev(dev, usin->sin_addr.s_addr);
+ if (!dstdev || !is_cxgb3_dev(dstdev))
+ return -ENETUNREACH;
+
+ if (dstdev->priv_flags & IFF_802_1Q_VLAN)
+ dev = dstdev;
+
rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
c3cn->daddr.sin_addr.s_addr,
c3cn->saddr.sin_port,
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index ce52270..2cc3968 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -4142,8 +4142,8 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
spin_lock_irq(shost->host_lock);
if (vport->fc_rscn_flush) {
/* Another thread is walking fc_rscn_id_list on this vport */
- spin_unlock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_DISCOVERY;
+ spin_unlock_irq(shost->host_lock);
/* Send back ACC */
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
return 0;
@@ -5948,8 +5948,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
lpfc_initial_fdisc(vport);
break;
}
-
} else {
+ vport->vpi_state |= LPFC_VPI_REGISTERED;
if (vport == phba->pport)
if (phba->sli_rev < LPFC_SLI_REV4)
lpfc_issue_fabric_reglogin(vport);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 3b94244..2445e39 100755
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -747,6 +747,10 @@ lpfc_linkdown(struct lpfc_hba *phba)
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
+
+ /* Block all SCSI stack I/Os */
+ lpfc_scsi_dev_block(phba);
+
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
if (phba->link_state > LPFC_LINK_DOWN) {
@@ -1555,10 +1559,16 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
* to book keeping the FCFIs can be used.
*/
if (shdr_status || shdr_add_status) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2521 READ_FCF_RECORD mailbox failed "
- "with status x%x add_status x%x, mbx\n",
- shdr_status, shdr_add_status);
+ if (shdr_status == STATUS_FCF_TABLE_EMPTY) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2726 READ_FCF_RECORD Indicates empty "
+ "FCF table.\n");
+ } else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2521 READ_FCF_RECORD mailbox failed "
+ "with status x%x add_status x%x, mbx\n",
+ shdr_status, shdr_add_status);
+ }
goto out;
}
/* Interpreting the returned information of FCF records */
@@ -1698,7 +1708,9 @@ lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
return;
}
+ spin_lock_irq(&phba->hbalock);
vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
+ spin_unlock_irq(&phba->hbalock);
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
lpfc_initial_fdisc(vport);
@@ -2259,7 +2271,10 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->mbxStatus);
break;
}
+ spin_lock_irq(&phba->hbalock);
vport->vpi_state &= ~LPFC_VPI_REGISTERED;
+ vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
@@ -4475,8 +4490,10 @@ lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
lpfc_mbx_unreg_vpi(vports[i]);
+ spin_lock_irq(&phba->hbalock);
vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
+ spin_unlock_irq(&phba->hbalock);
}
lpfc_destroy_vport_work_array(phba, vports);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
old mode 100644
new mode 100755
index 1585148..8a2a1c5
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1013,7 +1013,7 @@ struct lpfc_mbx_wq_destroy {
};
#define LPFC_HDR_BUF_SIZE 128
-#define LPFC_DATA_BUF_SIZE 4096
+#define LPFC_DATA_BUF_SIZE 2048
struct rq_context {
uint32_t word0;
#define lpfc_rq_context_rq_size_SHIFT 16
@@ -1371,6 +1371,7 @@ struct lpfc_mbx_query_fw_cfg {
#define STATUS_ERROR_ACITMAIN 0x2a
#define STATUS_REBOOT_REQUIRED 0x2c
#define STATUS_FCF_IN_USE 0x3a
+#define STATUS_FCF_TABLE_EMPTY 0x43
struct lpfc_mbx_sli4_config {
struct mbox_header header;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d4da6bd..b8eb1b6 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3006,6 +3006,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
+ uint32_t link_state;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
@@ -3052,9 +3053,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
break;
/*
* Currently, driver support only one FCF - so treat this as
- * a link down.
+ * a link down, but save the link state because we don't want
+ * it to be changed to Link Down unless it is already down.
*/
+ link_state = phba->link_state;
lpfc_linkdown(phba);
+ phba->link_state = link_state;
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
@@ -7226,8 +7230,6 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
@@ -7256,6 +7258,9 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
@@ -7507,6 +7512,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
error = -ENODEV;
goto out_free_sysfs_attr;
}
+ /* Default to single FCP EQ for non-MSI-X */
+ if (phba->intr_type != MSIX)
+ phba->cfg_fcp_eq_count = 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 7935667..589549b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1383,7 +1383,7 @@ lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
/* HBQ for ELS and CT traffic. */
static struct lpfc_hbq_init lpfc_els_hbq = {
.rn = 1,
- .entry_count = 200,
+ .entry_count = 256,
.mask_count = 0,
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
@@ -1482,8 +1482,11 @@ err:
int
lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->add_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return 0;
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->add_count);
}
/**
@@ -1498,8 +1501,12 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
static int
lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
{
- return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
- lpfc_hbq_defs[qno]->init_count));
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->entry_count);
+ else
+ return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+ lpfc_hbq_defs[qno]->init_count);
}
/**
@@ -4110,6 +4117,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
if (rc) {
dma_free_coherent(&phba->pcidev->dev, dma_size,
dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
return -EIO;
}
@@ -5848,7 +5856,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
iocbq->iocb.un.ulpWord[3]);
wqe->generic.word3 = 0;
bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
- bf_set(wqe_xc, &wqe->generic, 1);
/* The entire sequence is transmitted for this IOCB */
xmit_len = total_len;
cmnd = CMD_XMIT_SEQUENCE64_CR;
@@ -10944,7 +10951,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
return dmabuf;
}
temp_hdr = seq_dmabuf->hbuf.virt;
- if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) <
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_del_init(&seq_dmabuf->hbuf.list);
list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
@@ -10955,6 +10963,11 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
seq_dmabuf->time_stamp = jiffies;
lpfc_update_rcv_time_stamp(vport);
+ if (list_empty(&seq_dmabuf->dbuf.list)) {
+ temp_hdr = dmabuf->hbuf.virt;
+ list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+ return seq_dmabuf;
+ }
/* find the correct place in the sequence to insert this frame */
list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
@@ -10963,7 +10976,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
* If the frame's sequence count is greater than the frame on
* the list then insert the frame right after this frame
*/
- if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+ if (be16_to_cpu(new_hdr->fh_seq_cnt) >
+ be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
return seq_dmabuf;
}
@@ -11210,7 +11224,7 @@ lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* If there is a hole in the sequence count then fail. */
- if (++seq_count != hdr->fh_seq_cnt)
+ if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt))
return 0;
fctl = (hdr->fh_f_ctl[0] << 16 |
hdr->fh_f_ctl[1] << 8 |
@@ -11242,6 +11256,7 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
struct lpfc_iocbq *first_iocbq, *iocbq;
struct fc_frame_header *fc_hdr;
uint32_t sid;
+ struct ulp_bde64 *pbde;
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* remove from receive buffer list */
@@ -11283,8 +11298,9 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
if (!iocbq->context3) {
iocbq->context3 = d_buf;
iocbq->iocb.ulpBdeCount++;
- iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
- LPFC_DATA_BUF_SIZE;
+ pbde = (struct ulp_bde64 *)
+ &iocbq->iocb.unsli3.sli3Words[4];
+ pbde->tus.f.bdeSize = LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length,
&seq_dmabuf->cq_event.cqe.rcqe_cmpl);
@@ -11401,15 +11417,9 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
return;
}
/* If not last frame in sequence continue processing frames. */
- if (!lpfc_seq_complete(seq_dmabuf)) {
- /*
- * When saving off frames post a new one and mark this
- * frame to be freed when it is finished.
- **/
- lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
- dmabuf->tag = -1;
+ if (!lpfc_seq_complete(seq_dmabuf))
return;
- }
+
/* Send the complete sequence to the upper layer protocol */
lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
}
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 25d66d0..44e5f57 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -28,7 +28,7 @@
/* Multi-queue arrangement for fast-path FCP work queues */
#define LPFC_FN_EQN_MAX 8
#define LPFC_SP_EQN_DEF 1
-#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 4
#define LPFC_FP_EQN_MIN 1
#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c7f3aed..792f722 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.6"
+#define LPFC_DRIVER_VERSION "8.3.7"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 7d6dd83..e3c7fa6 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -512,8 +512,10 @@ enable_vport(struct fc_vport *fc_vport)
return VPORT_OK;
}
+ spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ spin_unlock_irq(&phba->hbalock);
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
@@ -700,7 +702,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
}
spin_unlock_irq(&phba->ndlp_lock);
}
- if (vport->vpi_state != LPFC_VPI_REGISTERED)
+ if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
goto skip_logo;
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index e7d2688..b6f1ef9 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -2483,14 +2483,12 @@ static int pmcraid_error_handler(struct pmcraid_cmd *cmd)
sense_copied = 1;
}
- if (RES_IS_GSCSI(res->cfg_entry)) {
+ if (RES_IS_GSCSI(res->cfg_entry))
pmcraid_cancel_all(cmd, sense_copied);
- } else if (sense_copied) {
+ else if (sense_copied)
pmcraid_erp_done(cmd);
- return 0;
- } else {
+ else
pmcraid_request_sense(cmd);
- }
return 1;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 21e2bc4..3a9f5b2 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -232,6 +232,9 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
if (off)
return 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (sscanf(buf, "%d:%x:%x", &val, &start, &size) < 1)
return -EINVAL;
if (start > ha->optrom_size)
@@ -379,6 +382,9 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj,
struct device, kobj)));
struct qla_hw_data *ha = vha->hw;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN))
return 0;
@@ -398,6 +404,9 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj,
struct qla_hw_data *ha = vha->hw;
uint8_t *tmp_data;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return 0;
+
if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size ||
!ha->isp_ops->write_nvram)
return 0;
@@ -1238,10 +1247,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
- int rval;
+ int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- rval = qla2x00_get_firmware_state(vha, state);
+ if (!vha->hw->flags.eeh_busy)
+ rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));
@@ -1452,10 +1462,13 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport)
if (!fcport)
return;
- if (unlikely(pci_channel_offline(fcport->vha->hw->pdev)))
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
+ if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
- else
- qla2x00_abort_fcport_cmds(fcport);
+ return;
+ }
/*
* Transport has effectively 'deleted' the rport, clear
@@ -1475,6 +1488,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
if (!fcport)
return;
+ if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
+ return;
+
if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
return;
@@ -1515,6 +1531,12 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
pfc_host_stat = &ha->fc_host_stat;
memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
+ if (test_bit(UNLOADING, &vha->dpc_flags))
+ goto done;
+
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ goto done;
+
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index f660dd7..d6d9c86 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -26,7 +26,7 @@
/* #define QL_DEBUG_LEVEL_14 */ /* Output RSCN trace msgs */
/* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */
/* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */
-/* #define QL_DEBUG_LEVEL_17 */ /* Output MULTI-Q trace messages */
+/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
/*
* Macros use for debugging the driver.
@@ -132,6 +132,13 @@
#else
#define DEBUG16(x) do {} while (0)
#endif
+
+#if defined(QL_DEBUG_LEVEL_17)
+#define DEBUG17(x) do {x;} while (0)
+#else
+#define DEBUG17(x) do {} while (0)
+#endif
+
/*
* Firmware Dump structure definition
*/
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 384afda..608e675 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2256,11 +2256,13 @@ struct qla_hw_data {
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
uint32_t npiv_supported :1;
+ uint32_t pci_channel_io_perm_failure :1;
uint32_t fce_enabled :1;
uint32_t fac_supported :1;
uint32_t chip_reset_done :1;
uint32_t port0 :1;
uint32_t running_gold_fw :1;
+ uint32_t eeh_busy :1;
uint32_t cpu_affinity_enabled :1;
uint32_t disable_msix_handshake :1;
} flags;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 0b6801f..f61fb8d 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -324,6 +324,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
extern int
qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int qla2x00_get_data_rate(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 73a7935..b4a0eac 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -269,6 +269,8 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
vha->flags.online = 0;
ha->flags.chip_reset_done = 0;
vha->flags.reset_active = 0;
+ ha->flags.pci_channel_io_perm_failure = 0;
+ ha->flags.eeh_busy = 0;
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&vha->loop_state, LOOP_DOWN);
vha->device_flags = DFLG_NO_CABLE;
@@ -581,6 +583,9 @@ qla2x00_reset_chip(scsi_qla_host_t *vha)
uint32_t cnt;
uint16_t cmd;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return;
+
ha->isp_ops->disable_intrs(ha);
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -786,6 +791,12 @@ void
qla24xx_reset_chip(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
+
+ if (pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure) {
+ return;
+ }
+
ha->isp_ops->disable_intrs(ha);
/* Perform RISC reset. */
@@ -2266,6 +2277,8 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
clear_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
clear_bit(RSCN_UPDATE, &vha->dpc_flags);
+ qla2x00_get_data_rate(vha);
+
/* Determine what we need to do */
if (ha->current_topology == ISP_CFG_FL &&
(test_bit(LOCAL_LOOP_UPDATE, &flags))) {
@@ -3560,6 +3573,13 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
/* Requeue all commands in outstanding command list. */
qla2x00_abort_all_cmds(vha, DID_RESET << 16);
+ if (unlikely(pci_channel_offline(ha->pdev) &&
+ ha->flags.pci_channel_io_perm_failure)) {
+ clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+ status = 0;
+ return status;
+ }
+
ha->isp_ops->get_flash_version(vha, req->ring);
ha->isp_ops->nvram_config(vha);
@@ -4458,6 +4478,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
int ret, retries;
struct qla_hw_data *ha = vha->hw;
+ if (ha->flags.pci_channel_io_perm_failure)
+ return;
if (!IS_FWI2_CAPABLE(ha))
return;
if (!ha->fw_major_version)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1692a88..ffd0efd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -152,7 +152,7 @@ qla2300_intr_handler(int irq, void *dev_id)
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_WORD(®->hccr);
@@ -1846,12 +1846,15 @@ qla24xx_intr_handler(int irq, void *dev_id)
reg = &ha->iobase->isp24;
status = 0;
+ if (unlikely(pci_channel_offline(ha->pdev)))
+ return IRQ_HANDLED;
+
spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
@@ -1992,7 +1995,7 @@ qla24xx_msix_default(int irq, void *dev_id)
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
- if (pci_channel_offline(ha->pdev))
+ if (unlikely(pci_channel_offline(ha->pdev)))
break;
hccr = RD_REG_DWORD(®->hccr);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 05d595d..056e4d4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -56,6 +56,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no));
+ if (ha->flags.pci_channel_io_perm_failure) {
+ DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
+ "Exiting.\n", __func__, vha->host_no));
+ return QLA_FUNCTION_TIMEOUT;
+ }
+
/*
* Wait for active mailbox commands to finish by waiting at most tov
* seconds. This is to serialize actual issuing of mailbox cmds during
@@ -154,10 +160,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
/* Check for pending interrupts. */
qla2x00_poll(ha->rsp_q_map[0]);
- if (command != MBC_LOAD_RISC_RAM_EXTENDED &&
- !ha->flags.mbox_int)
+ if (!ha->flags.mbox_int &&
+ !(IS_QLA2200(ha) &&
+ command == MBC_LOAD_RISC_RAM_EXTENDED))
msleep(10);
} /* while */
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "Waited %d sec\n",
+ (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)));
}
/* Check whether we timed out */
@@ -227,7 +237,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (rval == QLA_FUNCTION_TIMEOUT &&
mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
- if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
+ if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
+ ha->flags.eeh_busy) {
/* not in dpc. schedule it for dpc to take over. */
DEBUG(printk("%s(%ld): timeout schedule "
"isp_abort_needed.\n", __func__,
@@ -237,7 +248,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
base_vha->host_no));
qla_printk(KERN_WARNING, ha,
"Mailbox command timeout occurred. Scheduling ISP "
- "abort.\n");
+ "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy);
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else if (!abort_active) {
@@ -2530,6 +2541,9 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *vha, dma_addr_t eft_dma,
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2565,6 +2579,9 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *vha)
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2595,6 +2612,9 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma,
if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2639,6 +2659,9 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd)
if (!IS_FWI2_CAPABLE(vha->hw))
return QLA_FUNCTION_FAILED;
+ if (unlikely(pci_channel_offline(vha->hw->pdev)))
+ return QLA_FUNCTION_FAILED;
+
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -3643,3 +3666,36 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
return rval;
}
+
+int
+qla2x00_get_data_rate(scsi_qla_host_t *vha)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_DATA_RATE;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_INFO "%s(%ld): failed=%x mb[0]=%x.\n",
+ __func__, vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+ if (mcp->mb[1] != 0x7)
+ ha->link_data_rate = mcp->mb[1];
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2a4c7f4..b901aa2 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -639,8 +639,10 @@ static void qla_do_work(struct work_struct *work)
struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
struct scsi_qla_host *vha;
+ spin_lock_irq(&rsp->hw->hardware_lock);
vha = qla25xx_get_host(rsp);
qla24xx_process_response_queue(vha, rsp);
+ spin_unlock_irq(&rsp->hw->hardware_lock);
}
/* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2f873d2..209f50e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -475,11 +475,11 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
srb_t *sp;
int rval;
- if (unlikely(pci_channel_offline(ha->pdev))) {
- if (ha->pdev->error_state == pci_channel_io_frozen)
- cmd->result = DID_REQUEUE << 16;
- else
+ if (ha->flags.eeh_busy) {
+ if (ha->flags.pci_channel_io_perm_failure)
cmd->result = DID_NO_CONNECT << 16;
+ else
+ cmd->result = DID_REQUEUE << 16;
goto qc24_fail_command;
}
@@ -552,8 +552,15 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
#define ABORT_POLLING_PERIOD 1000
#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
+ scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ struct qla_hw_data *ha = vha->hw;
int ret = QLA_SUCCESS;
+ if (unlikely(pci_channel_offline(ha->pdev)) || ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha, "return:eh_wait\n"));
+ return ret;
+ }
+
while (CMD_SP(cmd) && wait_iter--) {
msleep(ABORT_POLLING_PERIOD);
}
@@ -1810,6 +1817,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/* Set ISP-type information. */
qla2x00_set_isp_flags(ha);
+
+ /* Set EEH reset type to fundamental if required by hba */
+ if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) {
+ pdev->needs_freset = 1;
+ pci_save_state(pdev);
+ }
+
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
@@ -2174,6 +2188,24 @@ qla2x00_free_device(scsi_qla_host_t *vha)
{
struct qla_hw_data *ha = vha->hw;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
+
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
+ /* Kill the kernel thread for this host */
+ if (ha->dpc_thread) {
+ struct task_struct *t = ha->dpc_thread;
+
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ kthread_stop(t);
+ }
+
qla25xx_delete_queues(vha);
if (ha->flags.fce_enabled)
@@ -2185,6 +2217,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
/* Stop currently executing firmware. */
qla2x00_try_to_stop_firmware(vha);
+ vha->flags.online = 0;
+
/* turn-off interrupts on the card */
if (ha->interrupts_on)
ha->isp_ops->disable_intrs(ha);
@@ -2859,6 +2893,13 @@ qla2x00_do_dpc(void *data)
if (!base_vha->flags.init_done)
continue;
+ if (ha->flags.eeh_busy) {
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "qla2x00_do_dpc: dpc_flags: %lx\n",
+ base_vha->dpc_flags));
+ continue;
+ }
+
DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
ha->dpc_active = 1;
@@ -3049,8 +3090,13 @@ qla2x00_timer(scsi_qla_host_t *vha)
int index;
srb_t *sp;
int t;
+ uint16_t w;
struct qla_hw_data *ha = vha->hw;
struct req_que *req;
+
+ /* Hardware read to raise pending EEH errors during mailbox waits. */
+ if (!pci_channel_offline(ha->pdev))
+ pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
/*
* Ports - Port down timer.
*
@@ -3252,16 +3298,23 @@ qla2x00_release_firmware(void)
static pci_ers_result_t
qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
- scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
+ scsi_qla_host_t *vha = pci_get_drvdata(pdev);
+ struct qla_hw_data *ha = vha->hw;
+
+ DEBUG2(qla_printk(KERN_WARNING, ha, "error_detected:state %x\n",
+ state));
switch (state) {
case pci_channel_io_normal:
+ ha->flags.eeh_busy = 0;
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
+ ha->flags.eeh_busy = 1;
pci_disable_device(pdev);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
- qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
+ ha->flags.pci_channel_io_perm_failure = 1;
+ qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
return PCI_ERS_RESULT_DISCONNECT;
}
return PCI_ERS_RESULT_NEED_RESET;
@@ -3312,6 +3365,8 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev)
struct qla_hw_data *ha = base_vha->hw;
int rc;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset\n"));
+
if (ha->mem_only)
rc = pci_enable_device_mem(pdev);
else
@@ -3320,19 +3375,33 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev)
if (rc) {
qla_printk(KERN_WARNING, ha,
"Can't re-enable PCI device after reset.\n");
-
return ret;
}
- pci_set_master(pdev);
if (ha->isp_ops->pci_config(base_vha))
return ret;
+#ifdef QL_DEBUG_LEVEL_17
+ {
+ uint8_t b;
+ uint32_t i;
+
+ printk("slot_reset_1: ");
+ for (i = 0; i < 256; i++) {
+ pci_read_config_byte(ha->pdev, i, &b);
+ printk("%s%02x", (i%16) ? " " : "\n", b);
+ }
+ printk("\n");
+ }
+#endif
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
ret = PCI_ERS_RESULT_RECOVERED;
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
+ DEBUG17(qla_printk(KERN_WARNING, ha,
+ "slot_reset-return:ret=%x\n", ret));
+
return ret;
}
@@ -3343,12 +3412,17 @@ qla2xxx_pci_resume(struct pci_dev *pdev)
struct qla_hw_data *ha = base_vha->hw;
int ret;
+ DEBUG17(qla_printk(KERN_WARNING, ha, "pci_resume\n"));
+
ret = qla2x00_wait_for_hba_online(base_vha);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"the device failed to resume I/O "
"from slot/link_reset");
}
+
+ ha->flags.eeh_busy = 0;
+
pci_cleanup_aer_uncorrect_error_status(pdev);
}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index c482220..a65dd95 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k8"
+#define QLA2XXX_VERSION "8.03.01-k9"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 3058bb1..fd7b15b 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -623,6 +623,11 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
}
break;
case INQUIRY:
+ if (lun >= host->max_lun) {
+ cmd->result = DID_NO_CONNECT << 16;
+ done(cmd);
+ return 0;
+ }
if (id != host->max_id - 1)
break;
if (!lun && !cmd->device->channel &&
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists