| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1263298146-25597-5-git-send-email-yinghai@kernel.org>
Date: Tue, 12 Jan 2010 04:09:06 -0800
From: Yinghai Lu <yinghai@...nel.org>
To: Suresh Siddha <suresh.b.siddha@...el.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
"ananth@...ibm.com" <ananth@...ibm.com>,
Ingo Molnar <mingo@...e.hu>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>
Subject: [RFC PATCH 5/5] x86: make 32bit apic flat to physflat switch like 64bit
kill def_to_bigsmp
and move switch from default to bigsmp at default_setup_apic_routing...
so make default_setup_apic_routing more like 64 bit
also make the dmi relate code to be __init/__initdata
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
arch/x86/include/asm/apic.h | 3 -
arch/x86/include/asm/mpspec.h | 1
arch/x86/kernel/acpi/boot.c | 3 -
arch/x86/kernel/apic/apic.c | 5 --
arch/x86/kernel/apic/bigsmp_32.c | 48 -----------------------
arch/x86/kernel/apic/probe_32.c | 80 ++++++++++++++++++++-------------------
arch/x86/kernel/mpparse.c | 4 -
arch/x86/kernel/setup.c | 2
arch/x86/kernel/smpboot.c | 2
9 files changed, 46 insertions(+), 102 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -23,7 +23,6 @@ extern int pic_mode;
#define MAX_IRQ_SOURCES 256
-extern unsigned int def_to_bigsmp;
extern u8 apicid_2_node[];
#ifdef CONFIG_X86_NUMAQ
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1895,11 +1895,6 @@ void __cpuinit generic_processor_info(in
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
-#ifdef CONFIG_X86_32
- if (num_processors > 8)
- def_to_bigsmp = 1;
-#endif
-
#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
Index: linux-2.6/arch/x86/kernel/apic/bigsmp_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/bigsmp_32.c
+++ linux-2.6/arch/x86/kernel/apic/bigsmp_32.c
@@ -7,7 +7,6 @@
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/dmi.h>
#include <linux/smp.h>
#include <asm/apicdef.h>
@@ -73,13 +72,6 @@ static void bigsmp_init_apic_ldr(void)
apic_write(APIC_LDR, val);
}
-static void bigsmp_setup_apic_routing(void)
-{
- printk(KERN_INFO
- "Enabling APIC mode: Physflat. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
static int bigsmp_apicid_to_node(int logical_apicid)
{
return apicid_2_node[hard_smp_processor_id()];
@@ -154,52 +146,16 @@ static void bigsmp_send_IPI_all(int vect
bigsmp_send_IPI_mask(cpu_online_mask, vector);
}
-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
- printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
- dmi_bigsmp = 1;
-
- return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
- { hp_ht_bigsmp, "HP ProLiant DL760 G2",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
- }
- },
-
- { hp_ht_bigsmp, "HP ProLiant DL740",
- { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
- }
- },
- { } /* NULL entry stops DMI scanning */
-};
-
static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
cpumask_clear(retmask);
cpumask_set_cpu(cpu, retmask);
}
-static int probe_bigsmp(void)
-{
- if (def_to_bigsmp)
- dmi_bigsmp = 1;
- else
- dmi_check_system(bigsmp_dmi_table);
-
- return dmi_bigsmp;
-}
-
struct apic apic_bigsmp = {
.name = "bigsmp",
- .probe = probe_bigsmp,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = bigsmp_apic_id_registered,
@@ -217,7 +173,7 @@ struct apic apic_bigsmp = {
.init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
- .setup_apic_routing = bigsmp_setup_apic_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = bigsmp_apicid_to_node,
.cpu_to_logical_apicid = bigsmp_cpu_to_logical_apicid,
Index: linux-2.6/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6/arch/x86/kernel/apic/probe_32.c
@@ -14,6 +14,8 @@
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/dmi.h>
+
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
@@ -52,15 +54,6 @@ static int __init print_ipi_mode(void)
}
late_initcall(print_ipi_mode);
-static void local_default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- printk(KERN_INFO
- "Enabling APIC mode: Flat. Using %d I/O APICs\n",
- nr_ioapics);
-#endif
-}
-
static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
/*
@@ -76,16 +69,10 @@ static void default_vector_allocation_do
cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
}
-/* should be called last. */
-static int probe_default(void)
-{
- return 1;
-}
-
struct apic apic_default = {
.name = "default",
- .probe = probe_default,
+ .probe = NULL,
.acpi_madt_oem_check = NULL,
.apic_id_registered = default_apic_id_registered,
@@ -103,7 +90,7 @@ struct apic apic_default = {
.init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
- .setup_apic_routing = local_default_setup_apic_routing,
+ .setup_apic_routing = NULL,
.multi_timer_check = NULL,
.apicid_to_node = default_apicid_to_node,
.cpu_to_logical_apicid = default_cpu_to_logical_apicid,
@@ -192,24 +179,40 @@ static int __init parse_apic(char *arg)
}
early_param("apic", parse_apic);
-void __init generic_bigsmp_probe(void)
+static int dmi_bigsmp __initdata; /* can be set by dmi scanners */
+
+static int __init hp_ht_bigsmp(const struct dmi_system_id *d)
{
-#ifdef CONFIG_X86_BIGSMP
- /*
- * This routine is used to switch to bigsmp mode when
- * - There is no apic= option specified by the user
- * - generic_apic_probe() has chosen apic_default as the sub_arch
- * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
- */
+ printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+ dmi_bigsmp = 1;
- if (!cmdline_apic && apic == &apic_default) {
- if (apic_bigsmp.probe()) {
- apic = &apic_bigsmp;
- printk(KERN_INFO "Overriding APIC driver with %s\n",
- apic->name);
+ return 0;
+}
+
+static struct dmi_system_id bigsmp_dmi_table[] __initdata = {
+ { hp_ht_bigsmp, "HP ProLiant DL760 G2",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
}
- }
+ },
+
+ { hp_ht_bigsmp, "HP ProLiant DL740",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+ }
+ },
+ { } /* NULL entry stops DMI scanning */
+};
+
+static inline const char *get_apic_name(struct apic *apic)
+{
+ if (apic == &apic_default)
+ return "flat";
+#ifdef CONFIG_X86_BIGSMP
+ if (apic == &apic_bigsmp);
+ return "physical flat";
#endif
+ return apic->name;
}
void __init default_setup_apic_routing(void)
@@ -219,13 +222,19 @@ void __init default_setup_apic_routing(v
* make sure we go to bigsmp according to real nr_cpu_ids
*/
if (!cmdline_apic && apic == &apic_default) {
- if (nr_cpu_ids > 8) {
+ dmi_check_system(bigsmp_dmi_table);
+ if (nr_cpu_ids > 8 || dmi_bigsmp) {
apic = &apic_bigsmp;
printk(KERN_INFO "Overriding APIC driver with %s\n",
- apic->name);
+ get_apic_name(apic));
}
}
#endif
+#ifdef CONFIG_X86_IO_APIC
+ printk(KERN_INFO
+ "Enabling APIC mode: %s. Using %d I/O APICs\n",
+ get_apic_name(apic), nr_ioapics);
+#endif
}
void __init generic_apic_probe(void)
@@ -233,14 +242,11 @@ void __init generic_apic_probe(void)
if (!cmdline_apic) {
int i;
for (i = 0; apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
+ if (apic_probe[i]->probe && apic_probe[i]->probe()) {
apic = apic_probe[i];
break;
}
}
- /* Not visible without early console */
- if (!apic_probe[i])
- panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
}
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -184,8 +184,6 @@ static void set_mca_bus(int x)
#endif
}
-unsigned int def_to_bigsmp;
-
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
unsigned int machine_submodel_id;
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -947,7 +947,7 @@ static int __init smp_sanity_check(unsig
preempt_disable();
#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
- if (def_to_bigsmp && nr_cpu_ids > 8) {
+ if (apic == &apic_default && nr_cpu_ids > 8) {
unsigned int cpu;
unsigned nr;
Index: linux-2.6/arch/x86/include/asm/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/apic.h
+++ linux-2.6/arch/x86/include/asm/apic.h
@@ -456,9 +456,6 @@ static inline void default_wait_for_init
return;
}
-extern void generic_bigsmp_probe(void);
-
-
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/smp.h>
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1185,9 +1185,6 @@ static void __init acpi_process_madt(voi
if (!error) {
acpi_lapic = 1;
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
/*
* Parse MADT IO-APIC entries
*/
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -359,10 +359,6 @@ static int __init smp_read_mpc(struct mp
x86_init.mpparse.mpc_record(1);
}
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
-
if (apic->setup_apic_routing)
apic->setup_apic_routing();
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists