smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3200822A Serial Number: 3LJ1SWF5 Firmware Version: 3.01 User Capacity: 200,049,647,616 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Thu Jan 14 17:08:55 2010 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 37) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 056 045 006 Pre-fail Always - 169686569 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 267 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 42 7 Seek_Error_Rate 0x000f 082 061 030 Pre-fail Always - 193571553 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15179 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 203 194 Temperature_Celsius 0x0022 038 046 000 Old_age Always - 38 195 Hardware_ECC_Recovered 0x001a 056 044 000 Old_age Always - 169686569 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 189 000 Old_age Always - 11 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 12042 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12042 occurred at disk power-on lifetime: 14108 hours (587 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 4f 04 2b e0 Error: UNC 8 sectors at LBA = 0x002b044f = 2819151 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 4f 04 2b e0 00 08:10:32.287 READ DMA 27 00 00 00 00 00 e0 00 08:10:28.361 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 08:10:28.353 IDENTIFY DEVICE ef 03 44 00 00 00 a0 02 08:10:28.334 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 08:10:28.331 READ NATIVE MAX ADDRESS EXT Error 12041 occurred at disk power-on lifetime: 14108 hours (587 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 4f 04 2b e0 Error: UNC 8 sectors at LBA = 0x002b044f = 2819151 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 4f 04 2b e0 00 08:10:20.345 READ DMA 27 00 00 00 00 00 e0 00 08:10:28.361 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 08:10:28.353 IDENTIFY DEVICE ef 03 44 00 00 00 a0 02 08:10:28.334 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 08:10:28.331 READ NATIVE MAX ADDRESS EXT Error 12040 occurred at disk power-on lifetime: 14108 hours (587 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 4f 04 2b e0 Error: UNC 8 sectors at LBA = 0x002b044f = 2819151 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 4f 04 2b e0 00 08:10:20.345 READ DMA 27 00 00 00 00 00 e0 00 08:10:20.343 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 08:10:20.342 IDENTIFY DEVICE ef 03 44 00 00 00 a0 02 08:10:20.323 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 08:10:16.443 READ NATIVE MAX ADDRESS EXT Error 12039 occurred at disk power-on lifetime: 14108 hours (587 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 4f 04 2b e0 Error: UNC 8 sectors at LBA = 0x002b044f = 2819151 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 4f 04 2b e0 00 08:10:20.345 READ DMA 27 00 00 00 00 00 e0 00 08:10:20.343 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 08:10:20.342 IDENTIFY DEVICE ef 03 44 00 00 00 a0 02 08:10:20.323 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 08:10:16.443 READ NATIVE MAX ADDRESS EXT Error 12038 occurred at disk power-on lifetime: 14108 hours (587 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 4f 04 2b e0 Error: UNC 8 sectors at LBA = 0x002b044f = 2819151 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 4f 04 2b e0 00 08:10:12.412 READ DMA 27 00 00 00 00 00 e0 00 08:10:12.408 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 08:10:12.400 IDENTIFY DEVICE ef 03 44 00 00 00 a0 02 08:10:12.381 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 08:10:16.443 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Interrupted (host reset) 50% 14108 - # 2 Short offline Completed without error 00% 14108 - # 3 Short offline Completed: read failure 90% 14108 2819151 # 4 Extended offline Interrupted (host reset) 60% 14027 - # 5 Short offline Completed without error 00% 14026 - # 6 Extended captive Interrupted (host reset) 90% 14026 - # 7 Extended captive Interrupted (host reset) 90% 14026 - # 8 Short captive Interrupted (host reset) 50% 14025 - # 9 Short captive Interrupted (host reset) 50% 14025 - #10 Short captive Interrupted (host reset) 50% 14025 - #11 Extended captive Completed: read failure 90% 14025 1907693 #12 Extended captive Completed: read failure 90% 14025 1906646 #13 Extended captive Completed: read failure 90% 14025 1905599 #14 Short offline Completed without error 00% 13374 - #15 Short offline Completed: read failure 90% 13374 1905423 #16 Short offline Completed without error 00% 9986 - #17 Short offline Completed without error 00% 4741 - #18 Short offline Completed without error 00% 291 - #19 Short offline Completed without error 00% 160 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.