[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20100118172119.14623.62147.sendpatchset@localhost>
Date: Mon, 18 Jan 2010 18:21:19 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 53/64] alim15x3: fix handling of DMA timings
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] alim15x3: fix handling of DMA timings
Stop depending on the BIOS setup.
Based on libata pata_ali host driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ide/alim15x3.c | 55 ++++++++++++++++++++++++++++++++++---------------
1 file changed, 39 insertions(+), 16 deletions(-)
Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -61,6 +61,25 @@ static void ali_fifo_control(ide_hwif_t
pci_write_config_byte(pdev, pio_fifo, fifo);
}
+static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive,
+ struct ide_timing *t)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ int port = hwif->channel ? 0x5c : 0x58;
+ u8 unit = drive->dn & 1;
+
+ t->setup = clamp_val(t->setup, 1, 8) & 7;
+ t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+ t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+ t->active = clamp_val(t->active, 1, 8) & 7;
+ t->recover = clamp_val(t->recover, 1, 16) & 15;
+
+ pci_write_config_byte(dev, port, t->setup);
+ pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b);
+ pci_write_config_byte(dev, port + unit + 2,
+ (t->active << 4) | t->recover);
+}
+
/**
* ali_set_pio_mode - set host controller for PIO mode
* @hwif: port
@@ -71,12 +90,9 @@ static void ali_fifo_control(ide_hwif_t
static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *pair = ide_get_pair_dev(drive);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
unsigned long T = 1000000 / bus_speed; /* PCI clock based */
- int port = hwif->channel ? 0x5c : 0x58;
- u8 unit = drive->dn & 1;
struct ide_timing t;
ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
@@ -93,21 +109,12 @@ static void ali_set_pio_mode(ide_hwif_t
}
}
- t.setup = clamp_val(t.setup, 1, 8) & 7;
- t.act8b = clamp_val(t.act8b, 1, 8) & 7;
- t.rec8b = clamp_val(t.rec8b, 1, 16) & 15;
- t.active = clamp_val(t.active, 1, 8) & 7;
- t.recover = clamp_val(t.recover, 1, 16) & 15;
-
/*
* PIO mode => ATA FIFO on, ATAPI FIFO off
*/
ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00);
- pci_write_config_byte(dev, port, t.setup);
- pci_write_config_byte(dev, port + 1, (t.act8b << 4) | t.rec8b);
- pci_write_config_byte(dev, port + unit + 2,
- (t.active << 4) | t.recover);
+ ali_program_timings(hwif, drive, &t);
}
/**
@@ -146,11 +153,15 @@ static u8 ali_udma_filter(ide_drive_t *d
static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
+ int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
+ unsigned long T = 1000000 / bus_speed; /* PCI clock based */
const u8 speed = drive->dma_mode;
u8 speed1 = speed;
u8 unit = drive->dn & 1;
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
+ struct ide_timing t;
if (speed == XFER_UDMA_6)
speed1 = 0x47;
@@ -164,9 +175,21 @@ static void ali_set_dma_mode(ide_hwif_t
tmpbyte &= ultra_enable;
pci_write_config_byte(dev, m5229_udma, tmpbyte);
- /*
- * FIXME: Oh, my... DMA timings are never set.
- */
+ ide_timing_compute(drive, drive->dma_mode, &t, T, 1);
+ if (pair) {
+ struct ide_timing p;
+
+ ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ if (pair->dma_mode) {
+ ide_timing_compute(pair, pair->dma_mode,
+ &p, T, 1);
+ ide_timing_merge(&p, &t, &t,
+ IDE_TIMING_SETUP | IDE_TIMING_8BIT);
+ }
+ }
+ ali_program_timings(hwif, drive, &t);
} else {
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
tmpbyte &= (0x0f << ((1-unit) << 2));
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists