[ 0.000000] Linux version 2.6.33-rc4 (root@treogen) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #2 SMP Tue Jan 19 19:36:07 CET 2010 [ 0.000000] Command line: root=/dev/sdc1 console=ttyS0,115200 console=tty1 sata_sil24.msi=1 radeon.modeset=1 raid=noautodetect [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffd0000 (usable) [ 0.000000] BIOS-e820: 00000000dffd0000 - 00000000dffde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffde000 - 00000000e0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdffd0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dffd0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dffd0000 page 4k [ 0.000000] kernel direct mapping tables up to dffd0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000 [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dffd0100 00064 (v01 A_M_I_ OEMXSDT 04000713 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dffd0290 000F4 (v03 A_M_I_ OEMFACP 04000713 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dffd0450 04FC5 (v01 S0027 S0027000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dffde000 00040 [ 0.000000] ACPI: APIC 00000000dffd0390 00080 (v01 A_M_I_ OEMAPIC 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd0410 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dffde040 00060 (v01 A_M_I_ AMI_OEM 04000713 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dffd5420 00038 (v01 A_M_I_ OEMHPET0 04000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffd5460 0003C (v01 A_M_I_ OEMMCFG 04000713 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000dffd54a0 00110 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000dffd55b0 004F0 (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-e0000000 [ 0.000000] SRAT: Node 1 PXM 1 100000000-120000000 [ 0.000000] NUMA: Allocated memnodemap from d000 - f440 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [000000000000f440 - 000000000002343f] [ 0.000000] bootmap [0000000000024000 - 0000000000033fff] pages 10 [ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 00019e0658] TEXT DATA BSS ==> [0001000000 - 00019e0658] [ 0.000000] #2 [00019e1000 - 00019e1238] BRK ==> [00019e1000 - 00019e1238] [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] [ 0.000000] #5 [000009fc00 - 00000f16f0] BIOS reserved ==> [000009fc00 - 00000f16f0] [ 0.000000] #6 [00000f188c - 00000ff780] BIOS reserved ==> [00000f188c - 00000ff780] [ 0.000000] #7 [00000f16f0 - 00000f188c] MP-table mpc ==> [00000f16f0 - 00000f188c] [ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] [ 0.000000] #9 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #10 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] #11 [000000d000 - 000000f440] MEMNODEMAP ==> [000000d000 - 000000f440] [ 0.000000] Bootmem setup node 1 0000000080000000-0000000120000000 [ 0.000000] NODE_DATA [0000000080000000 - 0000000080013fff] [ 0.000000] bootmap [0000000080014000 - 0000000080027fff] pages 14 [ 0.000000] (12 early reservations) ==> bootmem [0080000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0001000000 - 00019e0658] TEXT DATA BSS [ 0.000000] #2 [00019e1000 - 00019e1238] BRK [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #5 [000009fc00 - 00000f16f0] BIOS reserved [ 0.000000] #6 [00000f188c - 00000ff780] BIOS reserved [ 0.000000] #7 [00000f16f0 - 00000f188c] MP-table mpc [ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #9 [0000008000 - 000000c000] PGTABLE [ 0.000000] #10 [000000c000 - 000000d000] PGTABLE [ 0.000000] #11 [000000d000 - 000000f440] MEMNODEMAP [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880028600000-ffff88002a1fffff] on node 0 [ 0.000000] [ffffea0001c00000-ffffea0003ffffff] PMD -> [ffff880080200000-ffff880081ffffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 1: 0x00080000 -> 0x000dffd0 [ 0.000000] 1: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 524191 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 524240 [ 0.000000] DMA32 zone: 7168 pages used for memmap [ 0.000000] DMA32 zone: 386000 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77784 r8192 d20520 u1048576 [ 0.000000] pcpu-alloc: s77784 r8192 d20520 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1032199 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sdc1 console=ttyS0,115200 console=tty1 sata_sil24.msi=1 radeon.modeset=1 raid=noautodetect [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] Memory: 3991920k/4718592k available (5218k kernel code, 524868k absent, 201804k reserved, 3065k data, 1208k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2599.975 MHz processor. [ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.95 BogoMIPS (lpj=25999750) [ 0.030032] Security Framework initialized [ 0.034370] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.042628] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.051172] Mount-cache hash table entries: 256 [ 0.055840] tseg: 0000000000 [ 0.055850] CPU: Physical Processor ID: 0 [ 0.060003] CPU: Processor Core ID: 0 [ 0.063670] mce: CPU supports 5 MCE banks [ 0.067688] using C1E aware idle routine [ 0.070002] Performance Events: AMD PMU driver. [ 0.074562] ... version: 0 [ 0.080001] ... bit width: 48 [ 0.084093] ... generic registers: 4 [ 0.090001] ... value mask: 0000ffffffffffff [ 0.095305] ... max period: 00007fffffffffff [ 0.100001] ... fixed-purpose events: 0 [ 0.104009] ... event mask: 000000000000000f [ 0.110010] Freeing SMP alternatives: 34k freed [ 0.114564] ACPI: Core revision 20091214 [ 0.127936] Setting APIC routing to flat [ 0.130427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.238494] CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02 [ 0.250000] Booting Node 0, Processors #1 Ok. [ 0.400717] Booting Node 1, Processors #2 #3 Ok. [ 0.720115] Brought up 4 CPUs [ 0.723091] Total of 4 processors activated (20799.99 BogoMIPS). [ 0.729498] NET: Registered protocol family 16 [ 0.730020] node 0 link 0: io port [3000, ffffff] [ 0.730020] node 0 link 0: io port [2000, 2fff] [ 0.730020] TOM: 00000000e0000000 aka 3584M [ 0.734195] node 0 link 0: mmio [f0000000, f3ffffff] [ 0.734198] node 0 link 0: mmio [a0000, bffff] [ 0.734201] node 0 link 0: mmio [e0000000, efffffff] [ 0.734203] TOM2: 0000000120000000 aka 4608M [ 0.740002] bus: [00, ff] on node 0 link 0 [ 0.740004] bus: 00 index 0 io port: [0, ffff] [ 0.740006] bus: 00 index 1 mmio: [e0000000, ffffffff] [ 0.740008] bus: 00 index 2 mmio: [a0000, bffff] [ 0.740009] bus: 00 index 3 mmio: [120000000, fcffffffff] [ 0.740015] ACPI: bus type pci registered [ 0.744037] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.750002] PCI: not using MMCONFIG [ 0.760002] PCI: Using configuration type 1 for base access [ 0.770265] bio: create slab at 0 [ 0.780588] ACPI: EC: Look up EC in DSDT [ 0.783847] ACPI: Executed 1 blocks of module-level executable AML code [ 0.796480] ACPI: Interpreter enabled [ 0.800001] ACPI: (supports S0 S5) [ 0.803477] ACPI: Using IOAPIC for interrupt routing [ 0.808483] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) [ 0.845561] [Firmware Bug]: PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] not reserved in ACPI motherboard resources [ 0.850001] PCI: not using MMCONFIG [ 0.860741] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E7 (20091214/tbutils-314) [ 0.876979] ACPI: No dock devices found. [ 0.880253] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.885061] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.890446] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.890448] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.890450] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.890452] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.890454] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.890591] pci 0000:00:01.0: reg 10: [io 0x2f00-0x2f7f] [ 0.890618] pci 0000:00:01.1: reg 10: [io 0xa880-0xa8bf] [ 0.890628] pci 0000:00:01.1: reg 20: [io 0x2a00-0x2a3f] [ 0.890631] pci 0000:00:01.1: reg 24: [io 0x2a80-0x2abf] [ 0.890649] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.890654] pci 0000:00:01.1: PME# disabled [ 0.890672] pci 0000:00:02.0: reg 10: [mem 0xefaf8000-0xefaf8fff] [ 0.890688] pci 0000:00:02.0: supports D1 D2 [ 0.890689] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.890691] pci 0000:00:02.0: PME# disabled [ 0.890704] pci 0000:00:02.1: reg 10: [mem 0xefaebc00-0xefaebcff] [ 0.890719] pci 0000:00:02.1: supports D1 D2 [ 0.890721] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.890723] pci 0000:00:02.1: PME# disabled [ 0.890742] pci 0000:00:04.0: reg 20: [io 0xffa0-0xffaf] [ 0.890761] pci 0000:00:05.0: reg 10: [io 0xcc00-0xcc07] [ 0.890764] pci 0000:00:05.0: reg 14: [io 0xc880-0xc883] [ 0.890767] pci 0000:00:05.0: reg 18: [io 0xc800-0xc807] [ 0.890769] pci 0000:00:05.0: reg 1c: [io 0xc480-0xc483] [ 0.890772] pci 0000:00:05.0: reg 20: [io 0xc400-0xc40f] [ 0.890775] pci 0000:00:05.0: reg 24: [mem 0xefafb000-0xefafbfff] [ 0.890796] pci 0000:00:05.1: reg 10: [io 0xc080-0xc087] [ 0.890799] pci 0000:00:05.1: reg 14: [io 0xc000-0xc003] [ 0.890802] pci 0000:00:05.1: reg 18: [io 0xbc00-0xbc07] [ 0.890804] pci 0000:00:05.1: reg 1c: [io 0xb880-0xb883] [ 0.890807] pci 0000:00:05.1: reg 20: [io 0xb800-0xb80f] [ 0.890810] pci 0000:00:05.1: reg 24: [mem 0xefafa000-0xefafafff] [ 0.890831] pci 0000:00:05.2: reg 10: [io 0xb480-0xb487] [ 0.890834] pci 0000:00:05.2: reg 14: [io 0xb400-0xb403] [ 0.890837] pci 0000:00:05.2: reg 18: [io 0xb080-0xb087] [ 0.890839] pci 0000:00:05.2: reg 1c: [io 0xb000-0xb003] [ 0.890842] pci 0000:00:05.2: reg 20: [io 0xac00-0xac0f] [ 0.890845] pci 0000:00:05.2: reg 24: [mem 0xefaf9000-0xefaf9fff] [ 0.890889] pci 0000:00:06.1: reg 10: [mem 0xefafc000-0xefafffff] [ 0.890908] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.890910] pci 0000:00:06.1: PME# disabled [ 0.890938] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.890940] pci 0000:00:0b.0: PME# disabled [ 0.890961] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.890963] pci 0000:00:0c.0: PME# disabled [ 0.890984] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.890986] pci 0000:00:0d.0: PME# disabled [ 0.891008] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.891010] pci 0000:00:0f.0: PME# disabled [ 0.891127] pci 0000:05:06.0: reg 10: [mem 0xeefff000-0xeeffffff pref] [ 0.891168] pci 0000:05:06.1: reg 10: [mem 0xeeffe000-0xeeffefff pref] [ 0.891214] pci 0000:05:08.0: reg 10: [mem 0xeffff800-0xefffffff] [ 0.891218] pci 0000:05:08.0: reg 14: [mem 0xefff8000-0xefffbfff] [ 0.891241] pci 0000:05:08.0: supports D1 D2 [ 0.891242] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot [ 0.891245] pci 0000:05:08.0: PME# disabled [ 0.891264] pci 0000:00:06.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.900003] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff] [ 0.900005] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref] [ 0.900040] pci 0000:04:00.0: reg 10: [mem 0xefeffc00-0xefeffc7f 64bit] [ 0.900053] pci 0000:04:00.0: reg 18: [mem 0xefef8000-0xefefbfff 64bit] [ 0.900060] pci 0000:04:00.0: reg 20: [io 0xec00-0xec7f] [ 0.900073] pci 0000:04:00.0: reg 30: [mem 0xefe00000-0xefe7ffff pref] [ 0.900105] pci 0000:04:00.0: supports D1 D2 [ 0.900119] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.910027] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.920003] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 0.920006] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff] [ 0.920034] pci 0000:03:00.0: reg 10: [mem 0xefdf0000-0xefdfffff 64bit] [ 0.920079] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.920082] pci 0000:03:00.0: PME# disabled [ 0.940028] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.945258] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff] [ 0.945287] pci 0000:02:00.0: reg 10: [mem 0xefcf0000-0xefcfffff 64bit] [ 0.945332] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.945335] pci 0000:02:00.0: PME# disabled [ 0.960028] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.965373] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff] [ 0.965389] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref] [ 0.965393] pci 0000:01:00.0: reg 14: [io 0xd000-0xd0ff] [ 0.965396] pci 0000:01:00.0: reg 18: [mem 0xefbf0000-0xefbfffff] [ 0.965407] pci 0000:01:00.0: reg 30: [mem 0xefbc0000-0xefbdffff pref] [ 0.965419] pci 0000:01:00.0: supports D1 D2 [ 0.965434] pci 0000:01:00.1: reg 10: [mem 0xefbe0000-0xefbeffff] [ 0.965458] pci 0000:01:00.1: supports D1 D2 [ 0.965466] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.970025] pci 0000:00:0f.0: PCI bridge to [bus 01-01] [ 0.980002] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff] [ 0.980004] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff] [ 0.980007] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.980017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.980209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.980264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.980313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.980353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.980394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.990152] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.996729] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 1.002947] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 1.011461] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 1.018916] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10 [ 1.022635] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 [ 1.032041] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 1.040373] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 [ 1.046860] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 1.052041] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. [ 1.060374] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 1.066945] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 1.072932] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 1.081452] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 1.088025] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 1.091956] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 1.101063] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 1.107673] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 1.112949] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 [ 1.121627] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.130002] vgaarb: loaded [ 1.132760] SCSI subsystem initialized [ 1.133775] libata version 3.00 loaded. [ 1.133775] usbcore: registered new interface driver usbfs [ 1.140011] usbcore: registered new interface driver hub [ 1.145318] usbcore: registered new device driver usb [ 1.150015] PCI: Using ACPI for IRQ routing [ 1.154368] PCI: pci_cache_line_size set to 64 bytes [ 1.154453] NetLabel: Initializing [ 1.160001] NetLabel: domain hash size = 128 [ 1.164355] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.170011] NetLabel: unlabeled traffic allowed by default [ 1.175581] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.180005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.185110] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 1.220006] Switching to clocksource hpet [ 1.224025] Slow work thread pool: Starting up [ 1.224671] Slow work thread pool: Ready [ 1.228653] FS-Cache: Loaded [ 1.231628] CacheFiles: Loaded [ 1.234714] pnp: PnP ACPI init [ 1.237785] ACPI: bus type pnp registered [ 1.246683] pnp: PnP ACPI: found 14 devices [ 1.250870] ACPI: ACPI bus type pnp unregistered [ 1.255532] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 1.261449] system 00:06: [io 0x07b0-0x07df] has been reserved [ 1.267395] system 00:06: [io 0x0800-0x080f] has been reserved [ 1.273333] system 00:06: [io 0x0bb0-0x0bdf] has been reserved [ 1.279406] system 00:06: [io 0x2000-0x207f] has been reserved [ 1.285363] system 00:06: [io 0x2080-0x20ff] has been reserved [ 1.291279] system 00:06: [io 0x2400-0x247f] has been reserved [ 1.297226] system 00:06: [io 0x2480-0x24ff] has been reserved [ 1.303162] system 00:06: [io 0x2800-0x287f] has been reserved [ 1.309082] system 00:06: [io 0x2880-0x28ff] has been reserved [ 1.315037] system 00:06: [io 0x2c00-0x2c7f] has been reserved [ 1.320955] system 00:06: [io 0x2c80-0x2cff] has been reserved [ 1.326911] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved [ 1.333547] system 00:06: [mem 0xefa80000-0xefabffff] has been reserved [ 1.340160] system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved [ 1.346981] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 1.353615] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.360576] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.367228] system 00:0c: [io 0x0290-0x0297] has been reserved [ 1.373166] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.380129] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved [ 1.386780] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.393759] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.400722] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.413366] pci 0000:00:06.0: PCI bridge to [bus 05-05] [ 1.418593] pci 0000:00:06.0: bridge window [io disabled] [ 1.424290] pci 0000:00:06.0: bridge window [mem 0xeff00000-0xefffffff] [ 1.431081] pci 0000:00:06.0: bridge window [mem 0xeef00000-0xeeffffff pref] [ 1.438339] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 1.443581] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 1.449671] pci 0000:00:0b.0: bridge window [mem 0xefe00000-0xefefffff] [ 1.456493] pci 0000:00:0b.0: bridge window [mem pref disabled] [ 1.462604] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 1.467829] pci 0000:00:0c.0: bridge window [io disabled] [ 1.473680] pci 0000:00:0c.0: bridge window [mem 0xefd00000-0xefdfffff] [ 1.480462] pci 0000:00:0c.0: bridge window [mem pref disabled] [ 1.486595] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 1.491819] pci 0000:00:0d.0: bridge window [io disabled] [ 1.497513] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff] [ 1.504315] pci 0000:00:0d.0: bridge window [mem pref disabled] [ 1.510408] pci 0000:00:0f.0: PCI bridge to [bus 01-01] [ 1.515668] pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff] [ 1.521761] pci 0000:00:0f.0: bridge window [mem 0xefb00000-0xefbfffff] [ 1.528583] Clocksource tsc unstable (delta = 4397408805581 ns) [ 1.534655] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref] [ 1.542400] pci 0000:00:06.0: setting latency timer to 64 [ 1.542405] pci 0000:00:0b.0: setting latency timer to 64 [ 1.542410] pci 0000:00:0c.0: setting latency timer to 64 [ 1.542414] pci 0000:00:0d.0: setting latency timer to 64 [ 1.542418] pci 0000:00:0f.0: setting latency timer to 64 [ 1.542421] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.542423] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.542426] pci_bus 0000:05: resource 1 [mem 0xeff00000-0xefffffff] [ 1.542428] pci_bus 0000:05: resource 2 [mem 0xeef00000-0xeeffffff pref] [ 1.542430] pci_bus 0000:05: resource 3 [io 0x0000-0xffff] [ 1.542432] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 1.542435] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.542437] pci_bus 0000:04: resource 1 [mem 0xefe00000-0xefefffff] [ 1.542439] pci_bus 0000:03: resource 1 [mem 0xefd00000-0xefdfffff] [ 1.542441] pci_bus 0000:02: resource 1 [mem 0xefc00000-0xefcfffff] [ 1.542443] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.542445] pci_bus 0000:01: resource 1 [mem 0xefb00000-0xefbfffff] [ 1.542448] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff 64bit pref] [ 1.542480] NET: Registered protocol family 2 [ 1.547015] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.555743] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.568029] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.575297] TCP: Hash tables configured (established 524288 bind 65536) [ 1.581914] TCP reno registered [ 1.585109] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.591169] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.597776] NET: Registered protocol family 1 [ 1.602452] RPC: Registered udp transport module. [ 1.607176] RPC: Registered tcp transport module. [ 1.611889] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.640111] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.645670] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.651198] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.656754] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.662283] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.667853] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.673393] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.678960] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.684519] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.690037] pci 0000:01:00.0: Boot video device [ 1.690041] PCI: CLS 64 bytes, default 64 [ 1.690148] PCI-DMA: Disabling AGP. [ 1.693853] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.699426] PCI-DMA: using GART IOMMU. [ 1.703183] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.714830] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.723845] VFS: Disk quotas dquot_6.5.2 [ 1.727854] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.734453] FS-Cache: Netfs 'nfs' registered for caching [ 1.740004] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.749436] SGI XFS Quota Management subsystem [ 1.753906] msgmni has been set to 7925 [ 1.758547] alg: No test for stdrng (krng) [ 1.766702] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 1.772748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.780169] io scheduler noop registered [ 1.784180] io scheduler cfq registered (default) [ 1.789044] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.789058] alloc irq_desc for 24 on node 0 [ 1.789060] alloc kstat_irqs on node 0 [ 1.789063] __assign_irq_vector:assigning irq 24 to vector 73 [ 1.794655] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 1.794968] pcieport 0000:00:0c.0: setting latency timer to 64 [ 1.794980] alloc irq_desc for 25 on node 0 [ 1.794981] alloc kstat_irqs on node 0 [ 1.794983] __assign_irq_vector:assigning irq 25 to vector 81 [ 1.800569] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 1.800870] pcieport 0000:00:0d.0: setting latency timer to 64 [ 1.800882] alloc irq_desc for 26 on node 0 [ 1.800883] alloc kstat_irqs on node 0 [ 1.800885] __assign_irq_vector:assigning irq 26 to vector 89 [ 1.806455] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 1.806766] pcieport 0000:00:0f.0: setting latency timer to 64 [ 1.806778] alloc irq_desc for 27 on node 0 [ 1.806779] alloc kstat_irqs on node 0 [ 1.806781] __assign_irq_vector:assigning irq 27 to vector 97 [ 1.812366] pcieport 0000:00:0f.0: irq 27 for MSI/MSI-X [ 1.812961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.821341] ACPI: Power Button [PWRB] [ 1.825100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.832492] ACPI: Power Button [PWRF] [ 1.839448] Real Time Clock Driver v1.12b [ 1.843712] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.852692] Hangcheck: Using get_cycles(). [ 1.856856] [drm] Initialized drm 1.1.0 20060810 [ 1.861528] [drm] radeon kernel modesetting enabled. [ 1.866835] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19 [ 1.872598] alloc irq_desc for 19 on node 0 [ 1.872600] alloc kstat_irqs on node 0 [ 1.872602] __assign_irq_vector:assigning irq 19 to vector 105 [ 1.878261] radeon 0000:01:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 1.886673] radeon 0000:01:00.0: setting latency timer to 64 [ 1.888791] [drm] radeon: Initializing kernel modesetting. [ 1.894449] [drm] register mmio base: 0xEFBF0000 [ 1.899068] [drm] register mmio size: 65536 [ 1.903947] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 1.909620] [drm] Generation 2 PCI interface, using max accessible memory [ 1.916436] [drm] radeon: VRAM 128M [ 1.919930] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 1.925610] [drm] radeon: GTT 512M [ 1.929022] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [ 1.934635] alloc irq_desc for 28 on node 0 [ 1.934637] alloc kstat_irqs on node 0 [ 1.934640] __assign_irq_vector:assigning irq 28 to vector 113 [ 1.940314] radeon 0000:01:00.0: irq 28 for MSI/MSI-X [ 1.940522] [drm] radeon: using MSI. [ 1.944120] [drm] radeon: irq initialized. [ 1.949061] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.953910] [drm] RAM width 64bits DDR [ 1.957756] [TTM] Zone kernel: Available graphics memory: 2028954 kiB. [ 1.964400] [drm] radeon: 128M of VRAM memory ready [ 1.969275] [drm] radeon: 512M of GTT memory ready. [ 1.974192] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.981393] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 1.987280] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 1.993498] [drm] radeon: cp idle (0x10000C03) [ 1.998072] [drm] Loading R300 Microcode [ 2.002021] platform radeon_cp.0: firmware: using built-in firmware radeon/R300_cp.bin [ 2.010102] [drm] radeon: ring at 0x0000000020000000 [ 2.015087] [drm] ring test succeeded in 1 usecs [ 2.019790] [drm] radeon: ib pool ready. [ 2.023809] [drm] ib test succeeded in 0 usecs [ 2.028471] [drm] Default TV standard: NTSC [ 2.032676] [drm] 27.000000000 MHz TV ref clk [ 2.037035] [drm] DFP table revision: 4 [ 2.041058] [drm] Default TV standard: NTSC [ 2.045248] [drm] 27.000000000 MHz TV ref clk [ 2.049724] [drm] Radeon Display Connectors [ 2.054511] [drm] Connector 0: [ 2.057575] [drm] VGA [ 2.060047] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.066052] [drm] Encoders: [ 2.069029] [drm] CRT1: INTERNAL_DAC1 [ 2.073073] [drm] Connector 1: [ 2.076130] [drm] DVI-I [ 2.078759] [drm] HPD1 [ 2.081325] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 2.087331] [drm] Encoders: [ 2.090329] [drm] CRT2: INTERNAL_DAC2 [ 2.094346] [drm] DFP1: INTERNAL_TMDS1 [ 2.098445] [drm] Connector 2: [ 2.101535] [drm] S-video [ 2.104341] [drm] Encoders: [ 2.107315] [drm] TV1: INTERNAL_DAC2 [ 2.331346] No connectors reported conncted with modes [ 2.340666] [drm] fb mappable at 0xE00C0000 [ 2.344854] [drm] vram apper at 0xE0000000 [ 2.348953] [drm] size 5242880 [ 2.352047] [drm] fb depth is 24 [ 2.355282] [drm] pitch is 5120 [ 2.409811] [drm] DAC-9: set mode 1280x1024 2d [ 2.460100] [drm] TMDS-12: set mode 1280x1024 32 [ 2.470429] Console: switching to colour frame buffer device 160x64 [ 2.490678] fb0: radeondrmfb frame buffer device [ 2.495307] registered panic notifier [ 2.498983] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 2.506460] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.512992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.519328] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.525316] sata_sil24 0000:04:00.0: version 1.1 [ 2.525337] sata_sil24 0000:04:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19 [ 2.533990] alloc irq_desc for 29 on node 0 [ 2.533991] alloc kstat_irqs on node 0 [ 2.533994] __assign_irq_vector:assigning irq 29 to vector 121 [ 2.539681] sata_sil24 0000:04:00.0: irq 29 for MSI/MSI-X [ 2.539882] sata_sil24 0000:04:00.0: Using MSI [ 2.544372] sata_sil24 0000:04:00.0: setting latency timer to 64 [ 2.544601] scsi0 : sata_sil24 [ 2.547843] scsi1 : sata_sil24 [ 2.551032] ata1: SATA max UDMA/100 host m128@0xefeffc00 port 0xefef8000 irq 29 [ 2.558362] ata2: SATA max UDMA/100 host m128@0xefeffc00 port 0xefefa000 irq 29 [ 2.565829] sata_nv 0000:00:05.0: version 3.5 [ 2.566114] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 2.571896] alloc irq_desc for 23 on node 0 [ 2.571898] alloc kstat_irqs on node 0 [ 2.571900] __assign_irq_vector:assigning irq 23 to vector 129 [ 2.577583] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 2.586099] sata_nv 0000:00:05.0: Using SWNCQ mode [ 2.590956] sata_nv 0000:00:05.0: setting latency timer to 64 [ 2.591071] scsi2 : sata_nv [ 2.594013] scsi3 : sata_nv [ 2.597018] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 23 [ 2.604196] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 23 [ 2.611671] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 2.617435] alloc irq_desc for 22 on node 0 [ 2.617436] alloc kstat_irqs on node 0 [ 2.617438] __assign_irq_vector:assigning irq 22 to vector 137 [ 2.623152] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 2.631657] sata_nv 0000:00:05.1: Using SWNCQ mode [ 2.636490] sata_nv 0000:00:05.1: setting latency timer to 64 [ 2.636618] scsi4 : sata_nv [ 2.639558] scsi5 : sata_nv [ 2.642573] ata5: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 22 [ 2.649726] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 22 [ 2.657246] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 [ 2.663034] alloc irq_desc for 21 on node 0 [ 2.663035] alloc kstat_irqs on node 0 [ 2.663037] __assign_irq_vector:assigning irq 21 to vector 145 [ 2.668720] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21 [ 2.677237] sata_nv 0000:00:05.2: Using SWNCQ mode [ 2.682085] sata_nv 0000:00:05.2: setting latency timer to 64 [ 2.682204] scsi6 : sata_nv [ 2.685148] scsi7 : sata_nv [ 2.688149] ata7: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21 [ 2.695325] ata8: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21 [ 2.703774] pata_amd 0000:00:04.0: version 0.4.1 [ 2.703801] pata_amd 0000:00:04.0: setting latency timer to 64 [ 2.703870] scsi8 : pata_amd [ 2.708023] scsi9 : pata_amd [ 2.713013] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.721177] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.729649] tg3.c:v3.105 (December 2, 2009) [ 2.735339] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 2.742377] alloc irq_desc for 18 on node 0 [ 2.742378] alloc kstat_irqs on node 0 [ 2.742380] __assign_irq_vector:assigning irq 18 to vector 153 [ 2.748065] tg3 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 2.758830] tg3 0000:03:00.0: setting latency timer to 64 [ 2.804284] eth0: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:17:31:f9:cc:c5 [ 2.814661] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.823677] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.831501] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.838517] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 [ 2.845796] alloc irq_desc for 17 on node 0 [ 2.845797] alloc kstat_irqs on node 0 [ 2.845799] __assign_irq_vector:assigning irq 17 to vector 161 [ 2.851501] tg3 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 17 (level, low) -> IRQ 17 [ 2.862732] tg3 0000:02:00.0: setting latency timer to 64 [ 2.904267] eth1: Tigon3 [partno(BCM95700A6) rev b002] (PCI Express) MAC address 00:18:f3:44:df:ea [ 2.914878] eth1: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.924132] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.932200] eth1: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.939495] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 2.946971] alloc irq_desc for 16 on node 0 [ 2.946972] alloc kstat_irqs on node 0 [ 2.946974] __assign_irq_vector:assigning irq 16 to vector 169 [ 2.952677] ohci1394 0000:05:08.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 [ 2.994097] ata5: SATA link down (SStatus 0 SControl 300) [ 3.030040] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[effff800-efffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.031560] ata7: SATA link down (SStatus 0 SControl 300) [ 3.050994] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0) [ 3.058354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.066956] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 3.074517] alloc irq_desc for 20 on node 0 [ 3.074518] alloc kstat_irqs on node 0 [ 3.074520] __assign_irq_vector:assigning irq 20 to vector 177 [ 3.080223] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 3.092307] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 3.092310] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 3.099314] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.103799] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.116552] ehci_hcd 0000:00:02.1: debug port 1 [ 3.122923] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 3.122937] ehci_hcd 0000:00:02.1: irq 20, io mem 0xefaebc00 [ 3.150011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.157565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.166177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.167554] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133 [ 3.167557] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.191968] usb usb1: Product: EHCI Host Controller [ 3.198656] usb usb1: Manufacturer: Linux 2.6.33-rc4 ehci_hcd [ 3.206267] usb usb1: SerialNumber: 0000:00:02.1 [ 3.212853] hub 1-0:1.0: USB hub found [ 3.218412] hub 1-0:1.0: 10 ports detected [ 3.224402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.232683] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 3.240267] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 3.250482] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 3.250485] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 3.250855] ata3.00: configured for UDMA/133 [ 3.263663] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.272930] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefaf8000 [ 3.342020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.350663] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.359712] usb usb2: Product: OHCI Host Controller [ 3.366463] usb usb2: Manufacturer: Linux 2.6.33-rc4 ohci_hcd [ 3.374079] usb usb2: SerialNumber: 0000:00:02.0 [ 3.380673] hub 2-0:1.0: USB hub found [ 3.386277] hub 2-0:1.0: 10 ports detected [ 3.392318] Initializing USB Mass Storage driver... [ 3.399151] usbcore: registered new interface driver usb-storage [ 3.407022] USB Mass Storage support registered. [ 3.413554] usbcore: registered new interface driver libusual [ 3.421199] usbcore: registered new interface driver ums-alauda [ 3.429002] usbcore: registered new interface driver ums-cypress [ 3.436892] usbcore: registered new interface driver ums-datafab [ 3.444734] usbcore: registered new interface driver ums-freecom [ 3.452528] usbcore: registered new interface driver ums-isd200 [ 3.460200] usbcore: registered new interface driver ums-jumpshot [ 3.468030] usbcore: registered new interface driver ums-karma [ 3.475573] usbcore: registered new interface driver ums-sddr09 [ 3.483198] usbcore: registered new interface driver ums-sddr55 [ 3.490782] usbcore: registered new interface driver ums-usbat [ 3.498312] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.509607] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.516148] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.522911] mice: PS/2 mouse device common for all mice [ 3.529987] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.538154] I2O subsystem v1.325 [ 3.542925] i2o: max drivers = 8 [ 3.547906] i2c /dev entries driver [ 3.550247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.563330] i2c i2c-2: nForce2 SMBus adapter at 0x2a00 [ 3.570063] i2c i2c-3: nForce2 SMBus adapter at 0x2a80 [ 3.576695] Linux video capture interface: v2.00 [ 3.583131] bttv: driver version 0.9.18 loaded [ 3.588989] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 3.597319] bttv: Bt8xx card found (0). [ 3.602851] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 [ 3.610024] bttv 0000:05:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 3.619447] bttv0: Bt878 (rev 17) at 0000:05:06.0, irq: 19, latency: 64, mmio: 0xeefff000 [ 3.629106] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 3.638396] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 3.646041] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 3.654249] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 3.656748] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 3.694025] tveeprom 4-0050: Hauppauge model 61344, rev D421, serial# 3902813 [ 3.702670] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5) [ 3.711117] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04) [ 3.718585] tveeprom 4-0050: audio processor is MSP3415 (idx 6) [ 3.725990] tveeprom 4-0050: has radio [ 3.731197] bttv0: Hauppauge eeprom indicates model#61344 [ 3.738043] bttv0: tuner type=5 [ 3.747797] msp3400 4-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) [ 3.755655] msp3400 4-0040: msp3400 supports nicam, mode is autodetect [ 3.766917] tuner 4-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 3.774228] tuner-simple 4-0061: creating new instance [ 3.780833] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 3.783771] usb 2-9: new low speed USB device using ohci_hcd and address 2 [ 3.799410] bttv0: registered device video0 [ 3.805125] bttv0: registered device vbi0 [ 3.810647] bttv0: registered device radio0 [ 3.824743] bttv0: PLL: 28636363 => 35468950 .. ok [ 3.862610] input: i2c IR (Hauppauge) as /devices/virtual/input/input4 [ 3.870646] ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-4/4-0018/ir0 [bt878 #0 [sw]] [ 3.998030] usb 2-9: New USB device found, idVendor=062a, idProduct=0000 [ 4.006231] usb 2-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.373902] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c4c261] [ 4.712553] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 4.722361] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 [ 4.732153] md: raid1 personality registered for level 1 [ 4.739152] device-mapper: uevent: version 1.0.3 [ 4.745337] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 4.755348] EDAC MC: Ver: 2.1.0 Jan 13 2010 [ 4.761195] EDAC amd64_edac: Ver: 3.3.0 Jan 13 2010 [ 4.767749] EDAC amd64: ECC is enabled by BIOS. [ 4.773906] EDAC amd64: ECC is enabled by BIOS. [ 4.780060] EDAC MC: Rev F or later detected [ 4.780070] EDAC MC: DCT0 chip selects: [ 4.780072] EDAC MC: 0: 1024MB 1: 1024MB [ 4.780073] EDAC MC: 2: 0MB 3: 0MB [ 4.780074] EDAC MC: 4: 0MB 5: 0MB [ 4.780076] EDAC MC: 6: 0MB 7: 0MB [ 4.780188] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 4.781282] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 4.787633] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7 [ 4.787635] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.794063] ata1.00: configured for UDMA/100 [ 4.794170] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 4.794433] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 4.794472] sd 0:0:0:0: [sda] Write Protect is off [ 4.794474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.794489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.855052] EDAC MC: Rev F or later detected [ 4.855059] EDAC MC: DCT0 chip selects: [ 4.855060] EDAC MC: 0: 1024MB 1: 1024MB [ 4.855061] EDAC MC: 2: 0MB 3: 0MB [ 4.855063] EDAC MC: 4: 0MB 5: 0MB [ 4.855064] EDAC MC: 6: 0MB 7: 0MB [ 4.855141] sda: [ 4.856996] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 [ 4.868108] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 4.881193] cpuidle: using governor ladder [ 4.887089] cpuidle: using governor menu [ 4.892809] sda1 sda2 sda3 [ 4.897859] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.898791] usbcore: registered new interface driver hiddev [ 4.904305] input: HID 062a:0000 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input5 [ 4.904465] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:02.0-9/input0 [ 4.904514] usbcore: registered new interface driver usbhid [ 4.904515] usbhid: USB HID core driver [ 4.904575] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 4.956655] Bt87x 0000:05:06.1: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 4.966776] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 4.975376] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 4.982962] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 4.993274] alloc irq_desc for 30 on node 0 [ 4.993276] alloc kstat_irqs on node 0 [ 4.993279] __assign_irq_vector:assigning irq 30 to vector 185 [ 4.998961] HDA Intel 0000:00:06.1: irq 30 for MSI/MSI-X [ 5.001008] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 6.340416] ALSA device list: [ 6.345258] #0: HDA NVidia at 0xefafc000 irq 30 [ 6.351771] #1: Brooktree Bt878 at 0xeeffe000, irq 19 [ 6.359089] Initializing XFRM netlink socket [ 6.365186] NET: Registered protocol family 17 [ 6.371447] NET: Registered protocol family 15 [ 6.377749] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2218 processors (4 cpu cores) (version 2.20.00) [ 6.390186] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 6.397717] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 6.405221] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 6.412622] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 6.419984] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 6.427450] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 6.435435] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 6.442835] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 6.450189] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 6.457499] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 6.464794] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 6.472141] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 7.010041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 7.026736] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7 [ 7.036976] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.054501] ata2.00: configured for UDMA/100 [ 7.063056] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 7.075942] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 7.076267] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5 [ 7.076745] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 7.076844] sd 2:0:0:0: [sdc] Write Protect is off [ 7.076848] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.076916] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.077161] sdc: sdc1 sdc2 [ 7.141816] sd 1:0:0:0: [sdb] Write Protect is off [ 7.142268] sd 2:0:0:0: [sdc] Attached SCSI disk [ 7.159998] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.160048] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.173756] sdb: sdb1 sdb2 sdb3 [ 7.199871] sd 1:0:0:0: [sdb] Attached SCSI disk [ 7.410464] ata4: SATA link down (SStatus 0 SControl 300) [ 7.763038] ata6: SATA link down (SStatus 0 SControl 300) [ 8.114285] ata8: SATA link down (SStatus 0 SControl 300) [ 8.124054] ata10: port disabled. ignoring. [ 8.124109] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 8.156144] XFS mounting filesystem sdc1 [ 8.209109] Ending clean XFS mount for filesystem: sdc1 [ 8.209185] VFS: Mounted root (xfs filesystem) readonly on device 8:33. [ 8.220112] Freeing unused kernel memory: 1208k freed [ 9.812834] udev: starting version 146 [ 9.912024] udev: renamed network interface eth2 to eth4 [ 19.135631] alloc irq_desc for 31 on node 0 [ 19.135639] alloc kstat_irqs on node 0 [ 19.135646] __assign_irq_vector:assigning irq 31 to vector 193 [ 19.135663] tg3 0000:03:00.0: irq 31 for MSI/MSI-X [ 22.326847] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 22.326854] tg3: eth0: Flow control is on for TX and on for RX. [ 23.434378] alloc irq_desc for 32 on node 0 [ 23.434386] alloc kstat_irqs on node 0 [ 23.434393] __assign_irq_vector:assigning irq 32 to vector 201 [ 23.434410] tg3 0000:02:00.0: irq 32 for MSI/MSI-X [ 26.104711] tg3: eth1: Link is up at 1000 Mbps, full duplex. [ 26.104718] tg3: eth1: Flow control is on for TX and on for RX. [ 81.629547] XFS mounting filesystem sdb2 [ 81.705819] Starting XFS recovery on filesystem: sdb2 (logdev: internal) [ 81.740975] Ending XFS recovery on filesystem: sdb2 (logdev: internal) [ 100.664581] do_IRQ: 0.165 No irq handler for vector (irq -1) [ 100.664598] do_IRQ: 1.165 No irq handler for vector (irq -1) [ 100.664619] do_IRQ: 3.165 No irq handler for vector (irq -1) [ 100.664632] do_IRQ: 2.165 No irq handler for vector (irq -1) [ 130.980054] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen [ 130.980065] ata2.00: failed command: READ FPDMA QUEUED [ 130.980077] ata2.00: cmd 60/00:00:ad:9b:da/01:00:01:00:00/40 tag 0 ncq 131072 in [ 130.980080] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 130.980085] ata2.00: status: { DRDY } [ 130.980090] ata2.00: failed command: READ FPDMA QUEUED [ 130.980099] ata2.00: cmd 60/00:08:ad:9c:da/01:00:01:00:00/40 tag 1 ncq 131072 in [ 130.980101] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 130.980106] ata2.00: status: { DRDY } [ 130.980115] ata2: hard resetting link [ 133.180056] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 133.184995] do_IRQ: 3.165 No irq handler for vector (irq -1) [ 133.185006] do_IRQ: 0.165 No irq handler for vector (irq -1) [ 133.185020] do_IRQ: 1.165 No irq handler for vector (irq -1) [ 133.185032] do_IRQ: 2.165 No irq handler for vector (irq -1) [ 138.180036] ata2.00: qc timeout (cmd 0xec) [ 138.180045] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 138.180049] ata2.00: revalidation failed (errno=-5) [ 138.180056] ata2: hard resetting link [ 140.380051] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 150.380032] ata2.00: qc timeout (cmd 0xec) [ 150.380039] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 150.380044] ata2.00: revalidation failed (errno=-5) [ 150.380049] ata2: limiting SATA link speed to 1.5 Gbps [ 150.380054] ata2: hard resetting link [ 152.580051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 152.585120] ata2.00: failed to read native max address (err_mask=0x1) [ 152.585125] ata2.00: HPA support seems broken, skipping HPA handling [ 157.580030] ata2.00: qc timeout (cmd 0xef) [ 157.580039] ata2.00: failed to set xfermode (err_mask=0x4) [ 157.580044] ata2.00: disabled [ 157.580058] ata2.00: device reported invalid CHS sector 0 [ 157.580071] ata2: hard resetting link [ 159.783796] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 159.783811] ata2: EH complete [ 159.783834] sd 1:0:0:0: [sdb] Unhandled error code [ 159.783838] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 159.783844] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 01 da 9c ad 00 01 00 00 [ 159.783859] end_request: I/O error, dev sdb, sector 31104173 [ 159.783879] sd 1:0:0:0: [sdb] Unhandled error code [ 159.783882] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 159.783888] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 01 da 9b ad 00 01 00 00 [ 159.783900] end_request: I/O error, dev sdb, sector 31103917 [ 159.783985] sd 1:0:0:0: [sdb] READ CAPACITY(16) failed [ 159.783989] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 159.783995] sd 1:0:0:0: [sdb] Sense not available. [ 159.784042] sd 1:0:0:0: [sdb] READ CAPACITY failed [ 159.784046] sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 159.784051] sd 1:0:0:0: [sdb] Sense not available. [ 159.784120] sd 1:0:0:0: [sdb] Asking for cache data failed [ 159.784125] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 159.784137] sdb: detected capacity change from 640135028736 to 0