linux-kernel - Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4B575AF1.5020607@pobox.com>
Date:	Wed, 20 Jan 2010 14:35:13 -0500
From:	Jeff Garzik <jgarzik@...ox.com>
To:	Bart Hartgers <bart.hartgers@...il.com>
CC:	linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave
 on vt6421.

On 01/16/2010 06:56 PM, Bart Hartgers wrote:
> Before only the timings for master were set. Datasheet can be found
> here: ftp://ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF
> Surprisingly, a slave drive works without this patch. According to the
> datasheet, the controller by default derives the DMA mode from the
> Set Features command issued to a drive. Not sure about the PIO
> timings, though. The real problem is that the timings for the master
> effectively are the ones tuned for the slave. If these support
> different UDMA-settings, there is trouble, especially when the slave
> supports a higher UDMA than the master.
>
> Anyhow, using the same mechanism for both master and slave seems like
> a good idea.
>
> Signed-off-by: Bart Hartgers<bart.hartgers@...il.com>

applied


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/