[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B58603F.5030407@compulab.co.il>
Date: Thu, 21 Jan 2010 16:10:07 +0200
From: Denis Turischev <denis@...pulab.co.il>
To: LKML <linux-kernel@...r.kernel.org>
CC: Wim Van Sebroeck <wim@...ana.be>,
Andrey Panin <pazke@...trinvest.ru>
Subject: SBC-FITPC2 watchdog driver fix
sbc_fitpc2_wdt: fix I/O space access technique.
The mdelay function was used between I/O access commands, that causes peak
in CPU usage. Fix it by substitution mdelay to msleep.
Expand usage on fitPC2 compatible boards according to DMI identification.
Signed-off-by: Denis Turischev <denis@...pulab.co.il>
diff -Nru linux-2.6.33-rc4.orig/drivers/watchdog/Kconfig linux-2.6.33-rc4/drivers/watchdog/Kconfig
--- linux-2.6.33-rc4.orig/drivers/watchdog/Kconfig 2010-01-13 07:15:00.000000000 +0200
+++ linux-2.6.33-rc4/drivers/watchdog/Kconfig 2010-01-20 13:47:18.000000000 +0200
@@ -396,8 +396,8 @@
tristate "Compulab SBC-FITPC2 watchdog"
depends on X86
---help---
- This is the driver for the built-in watchdog timer on the fit-PC2
- Single-board computer made by Compulab.
+ This is the driver for the built-in watchdog timer on the fit-PC2,
+ fit-PC2i, CM-iAM single-board computers made by Compulab.
It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
diff -Nru linux-2.6.33-rc4.orig/drivers/watchdog/sbc_fitpc2_wdt.c linux-2.6.33-rc4/drivers/watchdog/sbc_fitpc2_wdt.c
--- linux-2.6.33-rc4.orig/drivers/watchdog/sbc_fitpc2_wdt.c 2010-01-13 07:15:00.000000000 +0200
+++ linux-2.6.33-rc4/drivers/watchdog/sbc_fitpc2_wdt.c 2010-01-20 15:28:19.000000000 +0200
@@ -46,9 +46,9 @@
static void wdt_send_data(unsigned char command, unsigned char data)
{
outb(command, COMMAND_PORT);
- mdelay(100);
+ msleep(100);
outb(data, DATA_PORT);
- mdelay(200);
+ msleep(200);
}
static void wdt_enable(void)
@@ -202,11 +202,10 @@
{
int err;
- if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
- pr_info("board name is: %s. Should be SBC-FITPC2\n",
- dmi_get_system_info(DMI_BOARD_NAME));
+ if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
return -ENODEV;
- }
+
+ pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists