| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4B6143C5.7060602@cn.fujitsu.com>
Date: Thu, 28 Jan 2010 15:59:01 +0800
From: Li Zefan <lizf@...fujitsu.com>
To: Ingo Molnar <mingo@...e.hu>
CC: Yinghai Lu <yinghai@...nel.org>, "H. Peter Anvin" <hpa@...or.com>,
Suresh Siddha <suresh.b.siddha@...el.com>,
LKML <linux-kernel@...r.kernel.org>
Subject: [BUG] tip tree - No irq handler for vector (irq -1)
After bootup, I can't use my keyboard and mouse.
Here's the full syslog:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-rc5-tip+ (lizf@...alhost.localdomain) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #30 SMP Thu Jan 28 14:50:38 CST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3bff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03C000000 mask FFC000000 uncachable
2 base 0D0000000 mask FF8000000 write-combining
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01600000
found SMP MP-table at [c00f5ad0] f5ad0
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 15000-1a000
RAMDISK: 37d1a000 - 37fef2e1
Allocated new RAMDISK: 00100000 - 003d52e1
Move RAMDISK from 0000000037d1a000 - 0000000037fef2e0 to 00100000 - 003d52e0
ACPI: RSDP 000f7560 00014 (v00 AWARD )
ACPI: RSDT 3bff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3bff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3bff3180 03ABC (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3bff0000 00040
ACPI: APIC 3bff6c80 00084 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
67MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
node 0 low ram: 00000000 - 37bfe000
node 0 bootmap 00016000 - 0001cf80
(14 early reservations) ==> bootmem [0000000000 - 0037bfe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000400000 - 0001188a1c] TEXT DATA BSS ==> [0000400000 - 0001188a1c]
#3 [0001189000 - 00011940ed] BRK ==> [0001189000 - 00011940ed]
#4 [00000f5ae0 - 0000100000] BIOS reserved ==> [00000f5ae0 - 0000100000]
#5 [00000f5ad0 - 00000f5ae0] MP-table mpf ==> [00000f5ad0 - 00000f5ae0]
#6 [000009f400 - 00000f0c00] BIOS reserved ==> [000009f400 - 00000f0c00]
#7 [00000f0d0c - 00000f5ad0] BIOS reserved ==> [00000f0d0c - 00000f5ad0]
#8 [00000f0c00 - 00000f0d0c] MP-table mpc ==> [00000f0c00 - 00000f0d0c]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#12 [0000100000 - 00003d52e1] NEW RAMDISK ==> [0000100000 - 00003d52e1]
#13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x0003bff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003bff0
On node 0 totalpages: 245631
free_area_init_node: node 0, pgdat c09ef980, node_mem_map c1196200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 136 pages used for memmap
HighMem zone: 17258 pages, LIFO batch:3
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3c000000 (gap: 3c000000:c2c00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 334 pages/cpu @c1a00000 s1346324 r0 d21740 u2097152
pcpu-alloc: s1346324 r0 d21740 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243711
Kernel command line: ro root=UUID=355bca51-980f-47e8-93ad-16ed4d633479 rhgb quiet ftrace=nop
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 4914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003bff0)
Memory: 946520k/982976k available (4141k kernel code, 35512k reserved, 2043k data, 1832k init, 69576k highmem)
virtual kernel memory layout:
fixmap : 0xfff1b000 - 0xfffff000 ( 912 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc0a0b000 - 0xc0bd5000 (1832 kB)
.data : 0xc080b5ff - 0xc0a0a458 (2043 kB)
.text : 0xc0400000 - 0xc080b5ff (4141 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:384
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3823 kB
per task-struct memory footprint: 1920 bytes
Fast TSC calibration using PIT
Detected 2800.014 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.02 BogoMIPS (lpj=2800014)
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 17486 entries in 35 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
Testing tracer nop: PASSED
Starting tracer 'nop'
Disabling FTRACE selftests due to running tracer 'nop'
lockdep: fixing up alternatives.
Booting Node 0, Processors #1
Initializing CPU#1
do_IRQ: 1.48 No irq handler for vector (irq -1)
Brought up 2 CPUs
Total of 2 processors activated (11199.29 BogoMIPS).
Time: 7:41:58 Date: 01/28/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbda0, last bus=1
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x3c000000-0xfebfffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: reg 10: [io 0xd000-0xd0ff]
pci 0000:00:02.7: reg 14: [io 0xd400-0xd47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10: [mem 0xe1104000-0xe1104fff]
pci 0000:00:03.1: reg 10: [mem 0xe1100000-0xe1100fff]
pci 0000:00:03.2: reg 10: [mem 0xe1101000-0xe1101fff]
pci 0000:00:03.3: reg 10: [mem 0xe1102000-0xe1102fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:05.0: reg 10: [io 0xd800-0xd807]
pci 0000:00:05.0: reg 14: [io 0xdc00-0xdc03]
pci 0000:00:05.0: reg 18: [io 0xe000-0xe007]
pci 0000:00:05.0: reg 1c: [io 0xe400-0xe403]
pci 0000:00:05.0: reg 20: [io 0xe800-0xe80f]
pci 0000:00:05.0: PME# supported from D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:0e.0: reg 10: [io 0xec00-0xecff]
pci 0000:00:0e.0: reg 14: [mem 0xe1103000-0xe11030ff]
pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0e.0: supports D1 D2
pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xe1000000-0xe101ffff]
pci 0000:01:00.0: reg 18: [io 0xc000-0xc07f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
do_IRQ: 1.58 No irq handler for vector (irq -1)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
do_IRQ: 1.59 No irq handler for vector (irq -1)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 14 15)
do_IRQ: 1.54 No irq handler for vector (irq -1)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 14 15)
do_IRQ: 1.53 No irq handler for vector (irq -1)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x3bff0000-0x3bffffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x3bfeffff] could not be reserved
system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x0805] has been reserved
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: [io 0x0880-0x088f] has been reserved
pci 0000:00:0e.0: BAR 6: assigned [mem 0x3c000000-0x3c01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xe1000000-0xe10fffff]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 3, 49152 bytes)
UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2900k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1719
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [FUTS]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
do_IRQ: 1.52 No irq handler for vector (irq -1)
do_IRQ: 1.52 No irq handler for vector (irq -1)
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
do_IRQ: 1.51 No irq handler for vector (irq -1)
do_IRQ: 1.51 No irq handler for vector (irq -1)
serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33-rc5-tip+ ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33-rc5-tip+ ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33-rc5-tip+ ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33-rc5-tip+ ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
do_IRQ: 1.60 No irq handler for vector (irq -1)
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@...hat.com
cpuidle: using governor ladder
cpuidle: using governor menu
nf_conntrack version 0.5.0 (14842 buckets, 59368 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Testing kprobe tracing: OK
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
Magic number: 10:944:673
Initalizing network drop monitor service
Freeing unused kernel memory: 1832k freed
Write protecting the kernel text: 4144k
Write protecting the kernel read-only data: 1572k
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
sata_sis 0000:00:05.0: version 1.0
sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
scsi2 : sata_sis
scsi3 : sata_sis
ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe800 irq 17
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma 0xe808 irq 17
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
ata4: SATA link down (SStatus 0 SControl 300)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
udev: starting version 141
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
input: PC Speaker as /devices/platform/pcspkr/input/input3
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:00:0e.0: no PCI Express capability
eth0: RTL8110s at 0xf862a000, 00:16:ec:2e:b7:e0, XID 04000000 IRQ 18
do_IRQ: 3 callbacks suppressed
do_IRQ: 1.56 No irq handler for vector (irq -1)
ppdev: user-space parallel port driver
md: md0 stopped.
md: bind<sda6>
md: linear personality registered for level -1
md0: detected capacity change from 0 to 15726608384
md0: unknown partition table
device-mapper: multipath: version 1.1.1 loaded
EXT3-fs (sda5): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): using internal journal
EXT3-fs (sda7): mounted filesystem with writeback data mode
Adding 1048564k swap on /dev/sda8. Priority:-1 extents:1 across:1048564k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169: eth0: link up
r8169: eth0: link up
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
do_IRQ: 1.52 No irq handler for vector (irq -1)
do_IRQ: 1.52 No irq handler for vector (irq -1)
do_IRQ: 1.51 No irq handler for vector (irq -1)
do_IRQ: 1.51 No irq handler for vector (irq -1)
eth0: no IPv6 routers present
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists