| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1264789230-8398-2-git-send-email-broonie@opensource.wolfsonmicro.com>
Date: Fri, 29 Jan 2010 18:20:29 +0000
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH 2/3] mfd: Add initial WM8994 support
The WM8994 is a highly integrated ultra low power audio hub CODEC.
Since it includes on-board regulators and GPIOs it is represented
as a multi-function device, though the overwhelming majority of
the functionality is provided by the ASoC CODEC driver.
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/wm8994-core.c | 537 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm8994/core.h | 54 ++++
include/linux/mfd/wm8994/gpio.h | 72 +++++
include/linux/mfd/wm8994/pdata.h | 97 +++++++
6 files changed, 773 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/wm8994-core.c
create mode 100644 include/linux/mfd/wm8994/core.h
create mode 100644 include/linux/mfd/wm8994/gpio.h
create mode 100644 include/linux/mfd/wm8994/pdata.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3cecce8..5bce647 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -295,6 +295,18 @@ config MFD_WM8350_I2C
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
+config MFD_WM8994
+ tristate "Support Wolfson Microelectronics WM8994"
+ select MFD_CORE
+ depends on I2C
+ help
+ The WM8994 is a highly integrated hi-fi CODEC designed for
+ smartphone applicatiosn. As well as audio functionality it
+ has on board GPIO and regulator functionality which is
+ supported via the relevant subsystems. This driver provides
+ core support for the WM8994, in order to use the actual
+ functionaltiy of the device other drivers must be enabled.
+
config MFD_PCF50633
tristate "Support for NXP PCF50633"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a9c8396..1fda810 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -25,6 +25,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
wm8350-objs += wm8350-irq.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
+obj-$(CONFIG_MFD_WM8994) += wm8994-core.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
new file mode 100644
index 0000000..299c1af
--- /dev/null
+++ b/drivers/mfd/wm8994-core.c
@@ -0,0 +1,537 @@
+/*
+ * wm8994-core.c -- Device access for Wolfson WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@...nsource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/wm8994/registers.h>
+
+static int wm8994_read(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *dest)
+{
+ int ret, i;
+ u16 *buf = dest;
+
+ BUG_ON(bytes % 2);
+ BUG_ON(bytes <= 0);
+
+ ret = wm8994->read_dev(wm8994, reg, bytes, dest);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < bytes / 2; i++) {
+ buf[i] = be16_to_cpu(buf[i]);
+
+ dev_vdbg(wm8994->dev, "Read %04x from R%d(0x%x)\n",
+ buf[i], reg + i, reg + i);
+ }
+
+ return 0;
+}
+
+/**
+ * wm8994_reg_read: Read a single WM8994 register.
+ *
+ * @wm8994: Device to read from.
+ * @reg: Register to read.
+ */
+int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
+{
+ unsigned short val;
+ int ret;
+
+ mutex_lock(&wm8994->io_lock);
+
+ ret = wm8994_read(wm8994, reg, 2, &val);
+
+ mutex_unlock(&wm8994->io_lock);
+
+ if (ret < 0)
+ return ret;
+ else
+ return val;
+}
+EXPORT_SYMBOL_GPL(wm8994_reg_read);
+
+/**
+ * wm8994_bulk_read: Read multiple WM8994 registers
+ *
+ * @wm8994: Device to read from
+ * @reg: First register
+ * @count: Number of registers
+ * @buf: Buffer to fill.
+ */
+int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
+ int count, u16 *buf)
+{
+ int ret;
+
+ mutex_lock(&wm8994->io_lock);
+
+ ret = wm8994_read(wm8994, reg, count * 2, buf);
+
+ mutex_unlock(&wm8994->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_bulk_read);
+
+static int wm8994_write(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *src)
+{
+ u16 *buf = src;
+ int i;
+
+ BUG_ON(bytes % 2);
+ BUG_ON(bytes <= 0);
+
+ for (i = 0; i < bytes / 2; i++) {
+ dev_vdbg(wm8994->dev, "Write %04x to R%d(0x%x)\n",
+ buf[i], reg + i, reg + i);
+
+ buf[i] = cpu_to_be16(buf[i]);
+ }
+
+ return wm8994->write_dev(wm8994, reg, bytes, src);
+}
+
+/**
+ * wm8994_reg_write: Write a single WM8994 register.
+ *
+ * @wm8994: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ */
+int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
+ unsigned short val)
+{
+ int ret;
+
+ mutex_lock(&wm8994->io_lock);
+
+ ret = wm8994_write(wm8994, reg, 2, &val);
+
+ mutex_unlock(&wm8994->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_reg_write);
+
+/**
+ * wm8994_set_bits: Set the value of a bitfield in a WM8994 register
+ *
+ * @wm8994: Device to write to.
+ * @reg: Register to write to.
+ * @mask: Mask of bits to set.
+ * @val: Value to set (unshifted)
+ */
+int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
+ unsigned short mask, unsigned short val)
+{
+ int ret;
+ u16 r;
+
+ mutex_lock(&wm8994->io_lock);
+
+ ret = wm8994_read(wm8994, reg, 2, &r);
+ if (ret < 0)
+ goto out;
+
+ r &= ~mask;
+ r |= val;
+
+ ret = wm8994_write(wm8994, reg, 2, &r);
+
+out:
+ mutex_unlock(&wm8994->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_set_bits);
+
+static struct mfd_cell wm8994_regulator_devs[] = {
+ { .name = "wm8994-ldo", .id = 1 },
+ { .name = "wm8994-ldo", .id = 2 },
+};
+
+static struct mfd_cell wm8994_devs[] = {
+ { .name = "wm8994-codec" },
+ { .name = "wm8994-gpio" },
+};
+
+/*
+ * Supplies for the main bulk of CODEC; the LDO supplies are ignored
+ * and should be handled via the standard regulator API supply
+ * management.
+ */
+static const char *wm8994_main_supplies[] = {
+ "DBVDD",
+ "DCVDD",
+ "AVDD1",
+ "AVDD2",
+ "CPVDD",
+ "SPKVDD1",
+ "SPKVDD2",
+};
+
+#ifdef CONFIG_PM
+static int wm8994_device_suspend(struct device *dev)
+{
+ struct wm8994 *wm8994 = dev_get_drvdata(dev);
+ int ret;
+
+ /* GPIO configuration state is saved here since we may be configuring
+ * the GPIO alternate functions even if we're not using the gpiolib
+ * driver for them.
+ */
+ ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
+ &wm8994->gpio_regs);
+ if (ret < 0)
+ dev_err(dev, "Failed to save GPIO registers: %d\n", ret);
+
+ /* For similar reasons we also stash the regulator states */
+ ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
+ &wm8994->ldo_regs);
+ if (ret < 0)
+ dev_err(dev, "Failed to save LDO registers: %d\n", ret);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+ if (ret != 0) {
+ dev_err(dev, "Failed to disable supplies: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wm8994_device_resume(struct device *dev)
+{
+ struct wm8994 *wm8994 = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+ if (ret != 0) {
+ dev_err(dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
+ &wm8994->ldo_regs);
+ if (ret < 0)
+ dev_err(dev, "Failed to restore LDO registers: %d\n", ret);
+
+ ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
+ &wm8994->gpio_regs);
+ if (ret < 0)
+ dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_REGULATOR
+static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
+{
+ struct wm8994_ldo_pdata *ldo_pdata;
+
+ if (!pdata)
+ return 0;
+
+ ldo_pdata = &pdata->ldo[ldo];
+
+ if (!ldo_pdata->init_data)
+ return 0;
+
+ return ldo_pdata->init_data->num_consumer_supplies != 0;
+}
+#else
+static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Instantiate the generic non-control parts of the device.
+ */
+static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
+{
+ struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+ int ret, i;
+
+ mutex_init(&wm8994->io_lock);
+ dev_set_drvdata(wm8994->dev, wm8994);
+
+ /* Add the on-chip regulators first for bootstrapping */
+ ret = mfd_add_devices(wm8994->dev, -1,
+ wm8994_regulator_devs,
+ ARRAY_SIZE(wm8994_regulator_devs),
+ NULL, 0);
+ if (ret != 0) {
+ dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
+ goto err;
+ }
+
+ wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
+ ARRAY_SIZE(wm8994_main_supplies),
+ GFP_KERNEL);
+ if (!wm8994->supplies)
+ goto err;
+
+ for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
+ wm8994->supplies[i].supply = wm8994_main_supplies[i];
+
+ ret = regulator_bulk_get(wm8994->dev, ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+ if (ret != 0) {
+ dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
+ goto err_get;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+ if (ret != 0) {
+ dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
+ goto err_supplies;
+ }
+
+ ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
+ if (ret < 0) {
+ dev_err(wm8994->dev, "Failed to read ID register\n");
+ goto err_enable;
+ }
+ if (ret != 0x8994) {
+ dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
+ ret);
+ ret = -EINVAL;
+ goto err_enable;
+ }
+
+ ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
+ if (ret < 0) {
+ dev_err(wm8994->dev, "Failed to read revision register: %d\n",
+ ret);
+ goto err_enable;
+ }
+
+ switch (ret) {
+ case 0:
+ case 1:
+ dev_warn(wm8994->dev, "revision %c not fully supported\n",
+ 'A' + ret);
+ break;
+ default:
+ dev_info(wm8994->dev, "revision %c\n", 'A' + ret);
+ break;
+ }
+
+
+ if (pdata) {
+ wm8994->gpio_base = pdata->gpio_base;
+
+ /* GPIO configuration is only applied if it's non-zero */
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+ if (pdata->gpio_defaults[i]) {
+ wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
+ 0xffff,
+ pdata->gpio_defaults[i]);
+ }
+ }
+ }
+
+ /* In some system designs where the regulators are not in use,
+ * we can achieve a small reduction in leakage currents by
+ * floating LDO outputs. This bit makes no difference if the
+ * LDOs are enabled, it only affects cases where the LDOs were
+ * in operation and are then disabled.
+ */
+ for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
+ if (wm8994_ldo_in_use(pdata, i))
+ wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
+ WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
+ else
+ wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
+ WM8994_LDO1_DISCH, 0);
+ }
+
+ ret = mfd_add_devices(wm8994->dev, -1,
+ wm8994_devs, ARRAY_SIZE(wm8994_devs),
+ NULL, 0);
+ if (ret != 0) {
+ dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
+ goto err_enable;
+ }
+
+ return 0;
+
+err_enable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+err_get:
+ regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
+err_supplies:
+ kfree(wm8994->supplies);
+err:
+ mfd_remove_devices(wm8994->dev);
+ kfree(wm8994);
+ return ret;
+}
+
+static void wm8994_device_exit(struct wm8994 *wm8994)
+{
+ mfd_remove_devices(wm8994->dev);
+ regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+ wm8994->supplies);
+ regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
+ kfree(wm8994->supplies);
+ kfree(wm8994);
+}
+
+static int wm8994_i2c_read_device(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *dest)
+{
+ struct i2c_client *i2c = wm8994->control_data;
+ int ret;
+ u16 r = cpu_to_be16(reg);
+
+ ret = i2c_master_send(i2c, (unsigned char *)&r, 2);
+ if (ret < 0)
+ return ret;
+ if (ret != 2)
+ return -EIO;
+
+ ret = i2c_master_recv(i2c, dest, bytes);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes)
+ return -EIO;
+ return 0;
+}
+
+/* Currently we allocate the write buffer on the stack; this is OK for
+ * small writes - if we need to do large writes this will need to be
+ * revised.
+ */
+static int wm8994_i2c_write_device(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *src)
+{
+ struct i2c_client *i2c = wm8994->control_data;
+ unsigned char msg[bytes + 2];
+ int ret;
+
+ reg = cpu_to_be16(reg);
+ memcpy(&msg[0], ®, 2);
+ memcpy(&msg[2], src, bytes);
+
+ ret = i2c_master_send(i2c, msg, bytes + 2);
+ if (ret < 0)
+ return ret;
+ if (ret < bytes + 2)
+ return -EIO;
+
+ return 0;
+}
+
+static int wm8994_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8994 *wm8994;
+
+ wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
+ if (wm8994 == NULL) {
+ kfree(i2c);
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(i2c, wm8994);
+ wm8994->dev = &i2c->dev;
+ wm8994->control_data = i2c;
+ wm8994->read_dev = wm8994_i2c_read_device;
+ wm8994->write_dev = wm8994_i2c_write_device;
+
+ return wm8994_device_init(wm8994, id->driver_data, i2c->irq);
+}
+
+static int wm8994_i2c_remove(struct i2c_client *i2c)
+{
+ struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
+
+ wm8994_device_exit(wm8994);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8994_i2c_suspend(struct i2c_client *i2c, pm_message_t state)
+{
+ return wm8994_device_suspend(&i2c->dev);
+}
+
+static int wm8994_i2c_resume(struct i2c_client *i2c)
+{
+ return wm8994_device_resume(&i2c->dev);
+}
+#else
+#define wm8994_i2c_suspend NULL
+#define wm8994_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8994_i2c_id[] = {
+ { "wm8994", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
+
+static struct i2c_driver wm8994_i2c_driver = {
+ .driver = {
+ .name = "wm8994",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8994_i2c_probe,
+ .remove = wm8994_i2c_remove,
+ .suspend = wm8994_i2c_suspend,
+ .resume = wm8994_i2c_resume,
+ .id_table = wm8994_i2c_id,
+};
+
+static int __init wm8994_i2c_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8994_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register wm8994 I2C driver: %d\n", ret);
+
+ return ret;
+}
+module_init(wm8994_i2c_init);
+
+static void __exit wm8994_i2c_exit(void)
+{
+ i2c_del_driver(&wm8994_i2c_driver);
+}
+module_exit(wm8994_i2c_exit);
+
+MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@...nsource.wolfsonmicro.com>");
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
new file mode 100644
index 0000000..b06ff28
--- /dev/null
+++ b/include/linux/mfd/wm8994/core.h
@@ -0,0 +1,54 @@
+/*
+ * include/linux/mfd/wm8994/core.h -- Core interface for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@...nsource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_CORE_H__
+#define __MFD_WM8994_CORE_H__
+
+struct regulator_dev;
+struct regulator_bulk_data;
+
+#define WM8994_NUM_GPIO_REGS 11
+#define WM8994_NUM_LDO_REGS 2
+
+struct wm8994 {
+ struct mutex io_lock;
+
+ struct device *dev;
+ int (*read_dev)(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *dest);
+ int (*write_dev)(struct wm8994 *wm8994, unsigned short reg,
+ int bytes, void *src);
+
+ void *control_data;
+
+ int gpio_base;
+
+ /* Used over suspend/resume */
+ u16 ldo_regs[WM8994_NUM_LDO_REGS];
+ u16 gpio_regs[WM8994_NUM_GPIO_REGS];
+
+ struct regulator_dev *dbvdd;
+ struct regulator_bulk_data *supplies;
+};
+
+/* Device I/O API */
+int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg);
+int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
+ unsigned short val);
+int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
+ unsigned short mask, unsigned short val);
+int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
+ int count, u16 *buf);
+
+#endif
diff --git a/include/linux/mfd/wm8994/gpio.h b/include/linux/mfd/wm8994/gpio.h
new file mode 100644
index 0000000..b4d4c22
--- /dev/null
+++ b/include/linux/mfd/wm8994/gpio.h
@@ -0,0 +1,72 @@
+/*
+ * include/linux/mfd/wm8994/gpio.h - GPIO configuration for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@...nsource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_GPIO_H__
+#define __MFD_WM8994_GPIO_H__
+
+#define WM8994_GPIO_MAX 11
+
+#define WM8994_GP_FN_PIN_SPECIFIC 0
+#define WM8994_GP_FN_GPIO 1
+#define WM8994_GP_FN_SDOUT 2
+#define WM8994_GP_FN_IRQ 3
+#define WM8994_GP_FN_TEMPERATURE 4
+#define WM8994_GP_FN_MICBIAS1_DET 5
+#define WM8994_GP_FN_MICBIAS1_SHORT 6
+#define WM8994_GP_FN_MICBIAS2_DET 7
+#define WM8994_GP_FN_MICBIAS2_SHORT 8
+#define WM8994_GP_FN_FLL1_LOCK 9
+#define WM8994_GP_FN_FLL2_LOCK 10
+#define WM8994_GP_FN_SRC1_LOCK 11
+#define WM8994_GP_FN_SRC2_LOCK 12
+#define WM8994_GP_FN_DRC1_ACT 13
+#define WM8994_GP_FN_DRC2_ACT 14
+#define WM8994_GP_FN_DRC3_ACT 15
+#define WM8994_GP_FN_WSEQ_STATUS 16
+#define WM8994_GP_FN_FIFO_ERROR 17
+#define WM8994_GP_FN_OPCLK 18
+
+#define WM8994_GPN_DIR 0x8000 /* GPN_DIR */
+#define WM8994_GPN_DIR_MASK 0x8000 /* GPN_DIR */
+#define WM8994_GPN_DIR_SHIFT 15 /* GPN_DIR */
+#define WM8994_GPN_DIR_WIDTH 1 /* GPN_DIR */
+#define WM8994_GPN_PU 0x4000 /* GPN_PU */
+#define WM8994_GPN_PU_MASK 0x4000 /* GPN_PU */
+#define WM8994_GPN_PU_SHIFT 14 /* GPN_PU */
+#define WM8994_GPN_PU_WIDTH 1 /* GPN_PU */
+#define WM8994_GPN_PD 0x2000 /* GPN_PD */
+#define WM8994_GPN_PD_MASK 0x2000 /* GPN_PD */
+#define WM8994_GPN_PD_SHIFT 13 /* GPN_PD */
+#define WM8994_GPN_PD_WIDTH 1 /* GPN_PD */
+#define WM8994_GPN_POL 0x0400 /* GPN_POL */
+#define WM8994_GPN_POL_MASK 0x0400 /* GPN_POL */
+#define WM8994_GPN_POL_SHIFT 10 /* GPN_POL */
+#define WM8994_GPN_POL_WIDTH 1 /* GPN_POL */
+#define WM8994_GPN_OP_CFG 0x0200 /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_MASK 0x0200 /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_SHIFT 9 /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_WIDTH 1 /* GPN_OP_CFG */
+#define WM8994_GPN_DB 0x0100 /* GPN_DB */
+#define WM8994_GPN_DB_MASK 0x0100 /* GPN_DB */
+#define WM8994_GPN_DB_SHIFT 8 /* GPN_DB */
+#define WM8994_GPN_DB_WIDTH 1 /* GPN_DB */
+#define WM8994_GPN_LVL 0x0040 /* GPN_LVL */
+#define WM8994_GPN_LVL_MASK 0x0040 /* GPN_LVL */
+#define WM8994_GPN_LVL_SHIFT 6 /* GPN_LVL */
+#define WM8994_GPN_LVL_WIDTH 1 /* GPN_LVL */
+#define WM8994_GPN_FN_MASK 0x001F /* GPN_FN - [4:0] */
+#define WM8994_GPN_FN_SHIFT 0 /* GPN_FN - [4:0] */
+#define WM8994_GPN_FN_WIDTH 5 /* GPN_FN - [4:0] */
+
+#endif
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
new file mode 100644
index 0000000..70d6a86
--- /dev/null
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -0,0 +1,97 @@
+/*
+ * include/linux/mfd/wm8994/pdata.h -- Platform data for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@...nsource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_PDATA_H__
+#define __MFD_WM8994_PDATA_H__
+
+#define WM8994_NUM_LDO 2
+#define WM8994_NUM_GPIO 11
+
+struct wm8994_ldo_pdata {
+ /** GPIOs to enable regulator, 0 or less if not available */
+ int enable;
+
+ const char *supply;
+ struct regulator_init_data *init_data;
+};
+
+#define WM8994_CONFIGURE_GPIO 0x8000
+
+#define WM8994_DRC_REGS 5
+#define WM8994_EQ_REGS 19
+
+/**
+ * DRC configurations are specified with a label and a set of register
+ * values to write (the enable bits will be ignored). At runtime an
+ * enumerated control will be presented for each DRC block allowing
+ * the user to choose the configration to use.
+ *
+ * Configurations may be generated by hand or by using the DRC control
+ * panel provided by the WISCE - see http://www.wolfsonmicro.com/wisce/
+ * for details.
+ */
+struct wm8994_drc_cfg {
+ const char *name;
+ u16 regs[WM8994_DRC_REGS];
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8994_retune_mobile_cfg {
+ const char *name;
+ unsigned int rate;
+ u16 regs[WM8994_EQ_REGS];
+};
+
+struct wm8994_pdata {
+ int gpio_base;
+
+ /**
+ * Default values for GPIOs if non-zero, WM8994_CONFIGURE_GPIO
+ * can be used for all zero values.
+ */
+ int gpio_defaults[WM8994_NUM_GPIO];
+
+ struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO];
+
+
+ int num_drc_cfgs;
+ struct wm8994_drc_cfg *drc_cfgs;
+
+ int num_retune_mobile_cfgs;
+ struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
+
+ /* LINEOUT can be differential or single ended */
+ unsigned int lineout1_diff:1;
+ unsigned int lineout2_diff:1;
+
+ /* Common mode feedback */
+ unsigned int lineout1fb:1;
+ unsigned int lineout2fb:1;
+
+ /* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+ unsigned int micbias1_lvl:1;
+ unsigned int micbias2_lvl:1;
+
+ /* Jack detect threashold levels, see datasheet for values */
+ unsigned int jd_scthr:2;
+ unsigned int jd_thr:2;
+};
+
+#endif
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists