lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1265032186.25750.31.camel@pc1117.cambridge.arm.com>
Date:	Mon, 01 Feb 2010 13:49:46 +0000
From:	Catalin Marinas <catalin.marinas@....com>
To:	Matthew Dharm <mdharm-kernel@...-eyed-alien.net>
Cc:	Sergei Shtylyov <sshtylyov@...mvista.com>,
	Ming Lei <tom.leiming@...il.com>, linux-usb@...r.kernel.org,
	linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: USB mass storage and ARM cache coherency

On Fri, 2010-01-29 at 18:54 +0000, Matthew Dharm wrote:
> On Fri, Jan 29, 2010 at 08:51:47PM +0300, Sergei Shtylyov wrote:
> > Catalin Marinas wrote:
> > 
> > >That would be a more general solution rather than going through each HCD
> > >driver since my understanding is that flush_dcache_page() is only needed
> > >together with the mass storage support.
> > 
> >   Note that DMA capable driver can be doing some transfers in PIO mode 
> > or falling back to PIO mode if DMA mode transfer is unsuccessful (the 
> > musb driver is an example of the latter and if the DMA rewrite patches 
> > will get accepted, it'll do short transfers in PIO mode).
> 
> Given that an HCD can choose, on the fly, if it's using DMA or PIO, the HCD
> driver is the only place to reasonably put any cache-synchronization code.
> 
> That said, what do the other SCSI HCDs do?  I'm guessing the question gets
> kinda muddy there, since the other SCSI HCDs all talk directly to some
> piece of hardware, and thus are responsible for the cache management
> themselves.
> 
> Based on that, one could argue that ub and usb-storage should be doing
> this.
> 
> HOWEVER, I firmly believe that the cache-management functions belong with
> the driver that actually talks to the low-level hardware, as that's the
> only place where you can be 100% certain of what cache operations are
> needed.  After all, I think someone is working on a USB-over-IP transport,
> and trying to manage cache at the usb-storage level in that scenario is
> just silly.
> 
> So, let's put this in the HCD drivers and be done with it.

Doing this (flush_dcache_page) in the HCD driver (ISP1760) solves my
problem. I'll post a patch and also cc the driver maintainer.

Thanks.

-- 
Catalin

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ