Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33-rc6-mm1+ (barrios@barriostarget) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #6 SMP Fri Feb 5 22:23:57 KST 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000beb50000 (usable) BIOS-e820: 00000000beb50000 - 00000000beb67000 (ACPI data) BIOS-e820: 00000000beb67000 - 00000000beb6a000 (ACPI NVS) BIOS-e820: 00000000beb6a000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0xbeb50 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0BEF00000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bef00000 - 00000000bf000000 (usable) ==> (reserved) e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (reserved) modified: 0000000000001000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009d800 (usable) modified: 000000000009d800 - 00000000000a0000 (reserved) modified: 00000000000dc000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000beb50000 (usable) modified: 00000000beb50000 - 00000000beb67000 (ACPI data) modified: 00000000beb67000 - 00000000beb6a000 (ACPI NVS) modified: 00000000beb6a000 - 00000000c0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01400000 found SMP MP-table at [c00f6fe0] f6fe0 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 15000-1a000 RAMDISK: 37a8a000 - 37fef71f Allocated new RAMDISK: 00fa1000 - 0150671f Move RAMDISK from 0000000037a8a000 - 0000000037fef71e to 00fa1000 - 0150671e ACPI: RSDP 000f6f30 00024 (v02 PTLTD ) ACPI: XSDT beb5d44b 000B4 (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: FACP beb66bb1 000F4 (v03 INTEL 06040000 PTL 00000003) ACPI: DSDT beb605f4 06549 (v01 INTEL BEARLAKE 06040000 MSFT 0100000E) ACPI: FACS beb69fc0 00040 ACPI: TCPA beb66ca5 00032 (v01 Phoeni x 06040000 TL 00000000) ACPI: _MAR beb66cd7 00030 (v01 Intel OEMDMAR 06040000 LOHR 00000001) ACPI: MCFG beb66d07 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: HPET beb66d43 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: APIC beb66d7b 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT beb66dff 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: ASF! beb66e27 00063 (v16 CETP CETP 06040000 PTL 00000001) ACPI: SLIC beb66e8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: SSDT beb5ed66 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) ACPI: SSDT beb5ecc0 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) ACPI: SSDT beb5ec1a 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) ACPI: SSDT beb5eb74 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) ACPI: SSDT beb5eace 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) ACPI: SSDT beb5ea28 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) ACPI: SSDT beb5e982 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) ACPI: SSDT beb5e8dc 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) ACPI: SSDT beb5d4ff 013DD (v01 PmRef CpuPm 00003000 INTL 20050228) ACPI: Local APIC address 0xfee00000 2163MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00016000 - 0001cf00 (14 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000100000 - 0000f9a7e4] TEXT DATA BSS ==> [0000100000 - 0000f9a7e4] #3 [0000f9b000 - 0000fa0180] BRK ==> [0000f9b000 - 0000fa0180] #4 [00000f6ff0 - 0000100000] BIOS reserved ==> [00000f6ff0 - 0000100000] #5 [00000f6fe0 - 00000f6ff0] MP-table mpf ==> [00000f6fe0 - 00000f6ff0] #6 [000009d800 - 000009e171] BIOS reserved ==> [000009d800 - 000009e171] #7 [000009e325 - 00000f6fe0] BIOS reserved ==> [000009e325 - 00000f6fe0] #8 [000009e171 - 000009e325] MP-table mpc ==> [000009e171 - 000009e325] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] #11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000] #12 [0000fa1000 - 000150671f] NEW RAMDISK ==> [0000fa1000 - 000150671f] #13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000] sizeof(struct page) = 32 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000beb50 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000001 -> 0x00000002 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000beb50 On node 0 totalpages: 781022 Node 0 memmap at 0xc1508000 size 25001984 first pfn 0xc1508020 free_area_init_node: node 0, pgdat c0802ec0, node_mem_map c1508020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3950 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4327 pages used for memmap HighMem zone: 549483 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000002000 - 0000000000010000 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 334 pages/cpu @c3000000 s1346196 r0 d21868 u2097152 pcpu-alloc: s1346196 r0 d21868 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 [0] 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774919 Kernel command line: root=UUID=044f82aa-4565-4a3a-8f71-eb0087c730da ro console=ttyS0,115200 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 allocated 15622700 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000377fe:000beb50) Memory: 3057504k/3124544k available (4845k kernel code, 66588k reserved, 2403k data, 1852k init, 2215240k highmem) virtual kernel memory layout: fixmap : 0xffe6e000 - 0xfffff000 (1604 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0815000 - 0xc09e4000 (1852 kB) .data : 0xc05bb766 - 0xc08144a8 (2403 kB) .text : 0xc0100000 - 0xc05bb766 (4845 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3823 kB per task-struct memory footprint: 1920 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- hpet clockevent registered Fast TSC calibration using PIT Detected 2659.824 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.64 BogoMIPS (lpj=10639296) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20100121 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a lockdep: fixing up alternatives. Booting Node 0, Processors #1 Initializing CPU#1 lockdep: fixing up alternatives. #2 Initializing CPU#2 lockdep: fixing up alternatives. #3 Ok. Initializing CPU#3 Brought up 4 CPUs Total of 4 processors activated (21279.77 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 Time: 13:30:54 Date: 02/05/10 NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 2.10 entry at 0xfdc00, last bus=17 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ============================================= [ INFO: possible recursive locking detected ] 2.6.33-rc6-mm1+ #6 --------------------------------------------- swapper/1 is trying to acquire lock: (&dev->mutex){+.+...}, at: [] __driver_attach+0x54/0xa0 but task is already holding lock: (&dev->mutex){+.+...}, at: [] __driver_attach+0x48/0xa0 other info that might help us debug this: 1 lock held by swapper/1: #0: (&dev->mutex){+.+...}, at: [] __driver_attach+0x48/0xa0 stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.33-rc6-mm1+ #6 Call Trace: [] ? printk+0x18/0x1e [] __lock_acquire+0xfef/0x1240 [] ? __lock_acquire+0x2e2/0x1240 [] lock_acquire+0xc5/0xe0 [] ? __driver_attach+0x54/0xa0 [] mutex_lock_nested+0x62/0x330 [] ? __driver_attach+0x54/0xa0 [] ? __driver_attach+0x54/0xa0 [] __driver_attach+0x54/0xa0 [] bus_for_each_dev+0x5b/0x80 [] ? acpi_device_remove+0x0/0x90 [] driver_attach+0x19/0x20 [] ? __driver_attach+0x0/0xa0 [] bus_add_driver+0x1f7/0x310 [] ? acpi_device_remove+0x0/0x90 [] driver_register+0x75/0x160 [] ? dock_init+0x0/0x81 [] ? acpi_pci_root_init+0x0/0x25 [] acpi_bus_register_driver+0x3a/0x3e [] acpi_pci_root_init+0x16/0x25 [] do_one_initcall+0x23/0x190 [] ? init_irq_proc+0x67/0x80 [] kernel_init+0x150/0x1a9 [] ? kernel_init+0x0/0x1a9 [] kernel_thread_helper+0x6/0x1c ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70194e0), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xbf000000-0xfebffbff] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xfdff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: reg 10: [mem 0xfc326000-0xfc32600f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10: [io 0x1c80-0x1c87] pci 0000:00:03.2: reg 14: [io 0x1c74-0x1c77] pci 0000:00:03.2: reg 18: [io 0x1c78-0x1c7f] pci 0000:00:03.2: reg 1c: [io 0x1c70-0x1c73] pci 0000:00:03.2: reg 20: [io 0x1c20-0x1c2f] pci 0000:00:03.3: reg 10: [io 0x1c88-0x1c8f] pci 0000:00:03.3: reg 14: [mem 0xfc324000-0xfc324fff] pci 0000:00:19.0: reg 10: [mem 0xfc300000-0xfc31ffff] pci 0000:00:19.0: reg 14: [mem 0xfc325000-0xfc325fff] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x1840-0x185f] pci 0000:00:1a.1: reg 20: [io 0x1860-0x187f] pci 0000:00:1a.2: reg 20: [io 0x1880-0x189f] pci 0000:00:1a.7: reg 10: [mem 0xfc326800-0xfc326bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfc320000-0xfc323fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff] pci 0000:00:1d.7: reg 10: [mem 0xfc326c00-0xfc326fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 003f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f) pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 20: [io 0x1c40-0x1c4f] pci 0000:00:1f.2: reg 24: [io 0x1c30-0x1c3f] pci 0000:00:1f.3: reg 10: [mem 0xfc327000-0xfc3270ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] pci 0000:00:1f.5: reg 10: [io 0x1cb8-0x1cbf] pci 0000:00:1f.5: reg 14: [io 0x1cac-0x1caf] pci 0000:00:1f.5: reg 18: [io 0x1cb0-0x1cb7] pci 0000:00:1f.5: reg 1c: [io 0x1ca8-0x1cab] pci 0000:00:1f.5: reg 20: [io 0x1c60-0x1c6f] pci 0000:00:1f.5: reg 24: [io 0x1c50-0x1c5f] pci 0000:01:00.0: reg 10: [mem 0xdd000000-0xddffffff] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xdd000000-0xdfffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:11:07.0: reg 10: [io 0x3000-0x30ff] pci 0000:11:07.0: reg 14: [mem 0xfc200000-0xfc2000ff] pci 0000:11:07.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:11:07.0: supports D1 D2 pci 0000:11:07.0: PME# supported from D1 D2 D3hot pci 0000:11:07.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70194e0), AE_ALREADY_EXISTS ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: WMI: Mapper loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized NET: Registered protocol family 8 NET: Registered protocol family 20 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:01: [io 0x0800-0x080f] has been reserved system 00:01: [io 0x1000-0x107f] has been reserved system 00:01: [io 0x1180-0x11bf] has been reserved system 00:01: [io 0x0295-0x0296] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0xfe00] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved pci 0000:00:1e.0: BAR 9: assigned [mem 0xc0000000-0xc00fffff pref] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] pci 0000:00:01.0: bridge window [mem 0xdd000000-0xdfffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:11:07.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 11-11] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc00fffff pref] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xdd000000-0xdfffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:11: resource 0 [io 0x3000-0x3fff] pci_bus 0000:11: resource 1 [mem 0xfc200000-0xfc2fffff] pci_bus 0000:11: resource 2 [mem 0xc0000000-0xc00fffff pref] pci_bus 0000:11: resource 3 [io 0x0000-0xffff] pci_bus 0000:11: resource 4 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 3, 49152 bytes) UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5525k freed Simple Boot Flag at 0x37 set to 0x1 cpufreq-nforce2: No nForce2 chipset. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1265376653.736:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.13) msgmni has been set to 1655 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: SSDT beb5efc5 001DD (v01 PmRef Cpu0Ist 00003000 INTL 20050228) ACPI: SSDT beb5f1a2 0016E (v01 PmRef Cpu1Ist 00003000 INTL 20050228) ACPI: SSDT beb5f310 0016E (v01 PmRef Cpu2Ist 00003000 INTL 20050228) ACPI: SSDT beb5f47e 0016E (v01 PmRef Cpu3Ist 00003000 INTL 20050228) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1c88 (irq = 17) is a 16550A brd: module loaded loop: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: Samsung DB-P70 detected, disabling SIDPR ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c40 irq 14 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c48 irq 15 ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata2.01: NODEV after polling detection ata_piix 0000:00:1f.5: setting latency timer to 64 ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, SC01, max UDMA/33 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x1cb8 ctl 0x1cac bmdma 0x1c60 irq 18 ata4: SATA max UDMA/133 cmd 0x1cb0 ctl 0x1ca8 bmdma 0x1c68 irq 18 ata2.00: configured for UDMA/33 pata_acpi 0000:00:03.2: enabling device (0004 -> 0005) pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled Fixed MDIO Bus: probed PPP generic driver version 2.4.2 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported IRQ 18/ehci_hcd:usb1: IRQF_DISABLED is not guaranteed on shared IRQs ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc326800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfc326c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 IRQ 16/uhci_hcd:usb3: IRQF_DISABLED is not guaranteed on shared IRQs uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 IRQ 18/uhci_hcd:usb5: IRQF_DISABLED is not guaranteed on shared IRQs uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 IRQ 16/uhci_hcd:usb6: IRQF_DISABLED is not guaranteed on shared IRQs uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 IRQ 17/uhci_hcd:usb7: IRQF_DISABLED is not guaranteed on shared IRQs ata4: SATA link down (SStatus 0 SControl 300) uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 IRQ 18/uhci_hcd:usb8: IRQF_DISABLED is not guaranteed on shared IRQs uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.1.1 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 Cannot allocate resource for EISA slot 3 EISA: Detected 0 cards. cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized ata3.00: ATA-8: Hitachi HDP725050GLA380, GM4OA52A, max UDMA/133 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 usb 3-2: new low speed USB device using uhci_hcd and address 2 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 Magic number: 14:205:533 bdi 1:11: hash matches rtc_cmos 00:05: setting system clock to 2010-02-05 13:30:56 UTC (1265376656) BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. usb 4-2: new low speed USB device using uhci_hcd and address 2 scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B SC01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg0 type 5 scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 2:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1852k freed Write protecting the kernel text: 4848k Write protecting the kernel read-only data: 1916k e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:00:19.0: setting latency timer to 64 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:11:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 r8169 0000:11:07.0: no PCI Express capability eth0: RTL8169sb/8110sb at 0xf849a000, 00:08:9f:f0:51:97, XID 10000000 IRQ 21 usbcore: registered new interface driver hiddev input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2/input0 e1000e 0000:00:19.0: irq 25 for MSI/MSI-X input: SAMSUNG SAMSUNG USB KEYBOARD as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:055D:0005.0002: input,hidraw1: USB HID v1.00 Keyboard [SAMSUNG SAMSUNG USB KEYBOARD] on usb-0000:00:1a.1-2/input0 input: SAMSUNG SAMSUNG USB KEYBOARD as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input4 generic-usb 0003:055D:0005.0003: input,hiddev96,hidraw2: USB HID v1.00 Device [SAMSUNG SAMSUNG USB KEYBOARD] on usb-0000:00:1a.1-2/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:13:77:8f:06:64 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth1: MAC: 7, PHY: 6, PBA No: ffffff-0ff PM: Starting manual resume from disk PM: Resume from partition 8:8 PM: Checking hibernation image. PM: Error -22 checking image file PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): mounted filesystem with writeback data mode udev: starting version 141 Linux agpgart interface v0.103 iTCO_vendor_support: vendor-support=0 input: PC Speaker as /devices/platform/pcspkr/input/input5 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9DO TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) tpm_inf_pnp 00:0a: Found TPM with ID IFX0102 tpm_inf_pnp 00:0a: TPM found: config base 0x167e, data base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] ppdev: user-space parallel port driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC888: BIOS auto-probing. lp0: using parport0 (interrupt-driven). Adding 3903756k swap on /dev/sda8. Priority:-1 extents:1 across:3903756k EXT3-fs (sda5): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda7): using internal journal EXT3-fs (sda7): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda9): using internal journal EXT3-fs (sda9): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sda6): using internal journal EXT3-fs (sda6): mounted filesystem with writeback data mode IRQ 17/serial: IRQF_DISABLED is not guaranteed on shared IRQs Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered r8169: eth0: link up e1000e 0000:00:19.0: irq 25 for MSI/MSI-X e1000e 0000:00:19.0: irq 25 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: no IPv6 routers present