lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-id: <4B6FA925.7070808@samsung.com>
Date:	Mon, 08 Feb 2010 15:03:17 +0900
From:	Joonyoung Shim <jy0922.shim@...sung.com>
To:	Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc:	lrg@...mlogic.co.uk, linux-kernel@...r.kernel.org,
	kyungmin.park@...sung.com
Subject: Re: [PATCH] regulator: Add enable_time on probe of WM8994

On 2/8/2010 8:56 AM, Mark Brown wrote:
> On Sun, Feb 07, 2010 at 09:41:26AM +0900, Joonyoung Shim wrote:
>> WM8994 regulator needs some delay to enable when it is probed too.
> 
> What is the problem that's fixed by this change?
> 
> The only case I can think of where it would help is if the regulator
> constraints are used to enable the regulators and run them at a
> non-default voltage.  (which is not a recommended configuration since

You're right. I misunderstanded something. The default voltage already 
is setted at the WM8994 ldo registers, but i made a mistake that set it
again on probe via the regulator constraints.

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ