| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 11 Feb 2010 23:18:49 +0100
From: Axel Uhl <axel.uhl@....de>
To: maciej.rutecki@...il.com
CC: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: Kernel Bug in ATA or SMART area
I had the same problem on a 2.6.28.
Best,
-- Axel
Maciej Rutecki wrote:
> (CCs added)
>
> Is older kernels work fine?
>
> Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a):
>> I get intermittent kernel exceptions, probably related to an issue with
>> the ATA or SMART code in the kernel / modules. I have a cron job that
>> every so many hours captures the disk temperatures. I "hdparm -y" my
>> disks when they are not used. It seems that when the cron job runs that
>> spins up the disks to access their temperature using smartctl, if during
>> this time certain other interactions happen, the kernel raises an
>> exception.
>>
>> The smartctl command I'm using is:
>>
>> /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP
>>
>> Here is one such exception from the syslog:
>>
>> Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD
>> (/etc/snmp/local-snmp-cronjob-spinup)
>> Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 -
>> accepted
>> Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection
>> Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0
>> SErr 0x0 action 0x6 frozen
>> Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART
>> Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd
>> b0/da:00:00:4f:c2/00:00:00:00:00/00
>> tag 0
>> Feb 10 06:57:09 homemp3 kernel: res
>> 40/00:01:00:00:00/00:00:00:00:00/00
>> Emask 0x4 (timeout)
>> Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY }
>> Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with
>> the "irqpoll" option)
>> Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not
>> tainted 2.6.32.7 #1
>> Feb 10 06:57:10 homemp3 kernel: Call Trace:
>> Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a
>> Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85
>> Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186
>> Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1
>> Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28
>> Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80
>> Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5
>> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30
>> Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec
>> Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1
>> Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f
>> Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f
>> Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80
>> Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ?
>> do_device_not_available+0x0/0x48
>> Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30
>> Feb 10 06:57:10 homemp3 kernel: handlers:
>> Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5)
>> Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4)
>> Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b
>> [snd_hda_intel])
>> Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e
>> [usbcore])
>> Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000])
>> Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10
>> Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link
>> Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133
>> Feb 10 06:57:11 homemp3 kernel: ata5: EH complete
>>
>>
>> I suppose the hadam3p_um_6.14 command is part of my BOINC installation,
>> doing a climate simulation. However, the problem has also occurred with
>> this program not running.
>>
>> Here's the output of scripts/ver_linux:
>>
>> If some fields are empty or look unusual you may have an old version.
>> Compare to the current minimal requirements in Documentation/Changes.
>>
>> Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux
>>
>> Gnu C 4.3.2
>> Gnu make 3.81
>> binutils 2.18.0.20080103
>> util-linux 2.13.1.1
>> mount 2.13.1.1
>> module-init-tools found
>> Linux C Library 2.7
>> Dynamic linker (ldd) 2.7
>> Procps 3.2.7
>> Console-tools 0.2.3
>> Sh-utils 6.10
>> udev 125
>> Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate
>> zlib_deflate ppp_ge
>> neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa
>> snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel
>> saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss
>> dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event
>> 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device
>> saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat
>> soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore
>> via_rhine i2c_core e1000
>>
>>
>> As a result of the exception, the system becomes very unresponsive. Any
>> sort of I/O seems to have very poor response time. Ping times in the
>> gigabit network suddenly take several tens of milliseconds. It seems
>> this may have to do with the IRQ10 being somehow affected, but I'm not
>> sure.
>>
>> /proc/version:
>>
>> Linux version 2.6.32.7 (root@...emp3) (gcc version 4.3.2 (Debian
>> 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010
>>
>> /proc/cpuinfo:
>>
>> processor : 0
>> vendor_id : GenuineIntel
>> cpu family : 15
>> model : 4
>> model name : Intel(R) Celeron(R) CPU 2.80GHz
>> stepping : 9
>> cpu MHz : 2799.930
>> cache size : 256 KB
>> fdiv_bug : no
>> hlt_bug : no
>> f00f_bug : no
>> coma_bug : no
>> fpu : yes
>> fpu_exception : yes
>> cpuid level : 5
>> wp : yes
>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>> mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
>> constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm
>> bogomips : 5623.13
>> clflush size : 64
>> cache_alignment : 128
>> address sizes : 36 bits physical, 48 bits virtual
>> power management:
>>
>>
>> Output of lcpsi -vvv:
>>
>> 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
>> Subsystem: ASRock Incorporation Device 0308
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort+ >SERR- <PERR+ INTx-
>> Latency: 8, Cache Line Size: 32 bytes
>> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>> Capabilities: [80] AGP version 3.5
>> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
>> HTrans- 64
>> bit- FW- AGP3- Rate=x1,x2,x4
>> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
>> FW- Rate=<n
>> one>
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: agpgart-via
>>
>> 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
>> Subsystem: ASRock Incorporation Device 1308
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>>
>> 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
>> Subsystem: ASRock Incorporation Device 2308
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>>
>> 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>>
>> 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
>> Subsystem: ASRock Incorporation Device 4308
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>>
>> 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
>> (prog-if
>> 20 [IO(X)-APIC])
>> Subsystem: ASRock Incorporation Device 5308
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>>
>> 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>>
>> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
>> (prog-if 00 [
>> Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: fc700000-fe7fffff
>> Prefetchable memory behind bridge: cff00000-dfefffff
>> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- <SERR- <PERR-
>> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [70] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge
>> Controller (p
>> rog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>> I/O behind bridge: 00001000-00001fff
>> Memory behind bridge: fe800000-fe8fffff
>> Prefetchable memory behind bridge: 40000000-401fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort- <SERR- <PERR-
>> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1
>> unlimited
>> ExtTag- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupporte
>> d-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> AuxPwr+ TransPe
>> nd-
>> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1,
>> Latency L
>> 0 <64ns, L1 <1us
>> ClockPM- Suprise- LLActRep+ BwNot-
>> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk-
>> DLActive
>> - BWMgmt- ABWMgmt-
>> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
>> HotPlug+ Surpise
>> +
>> Slot # 10, PowerLimit 75.000000; Interlock-
>> NoCompl-
>> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
>> HPIrq- L
>> inkChg-
>> Control: AttnInd Unknown, PwrInd Unknown,
>> Power- Interlo
>> ck-
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
>> PresDet- Interl
>> ock-
>> Changed: MRL- PresDet- LinkState-
>> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
>> PMEIntEna- CRSV
>> isible-
>> RootCap: CRSVisible-
>> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>> Capabilities: [68] Power Management version 2
>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> PME(D0+,D1-,D2-,D3hot
>> +,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+
>> Queue=0/0
>> Enable-
>> Address: 0000000000000000 Data: 0000
>> Masking: 00000000 Pending: 00000000
>> Capabilities: [100] Advanced Error Reporting <?>
>> Capabilities: [140] Virtual Channel <?>
>>
>> 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
>> Controll
>> er (rev 05)
>> Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32 (63750ns min), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 10
>> Region 0: Memory at feba0000 (32-bit, non-prefetchable)
>> [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable)
>> [size=128K] Region 2: I/O ports at cc00 [size=64]
>> Expansion ROM at feb60000 [disabled] [size=128K]
>> Capabilities: [dc] Power Management version 2
>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>> PME(D0+,D1-,D2-,D3hot
>> +,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>> Capabilities: [e4] PCI-X non-bridge device
>> Command: DPERE- ERO+ RBC=512 OST=1
>> Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
>> DMMRBC=20
>> 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
>> Kernel driver in use: e1000
>> Kernel modules: e1000
>>
>> 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
>> 300 TX4
>> ) (rev 02)
>> Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
>> Interrupt: pin A routed to IRQ 10
>> Region 0: I/O ports at d400 [size=128]
>> Region 2: I/O ports at c800 [size=256]
>> Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>> Region 4: Memory at febc0000 (32-bit, non-prefetchable)
>> [size=128K] Expansion ROM at febe0000 [disabled] [size=32K]
>> Capabilities: [60] Power Management version 2
>> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: sata_promise
>>
>> 00:0c.0 Multimedia controller: Philips Semiconductors
>> SAA7131/SAA7133/SAA7135 Vi
>> deo Broadcast Decoder (rev d1)
>> Subsystem: Avermedia Technologies Inc Device 2c05
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: [40] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: saa7134
>> Kernel modules: saa7134
>>
>> 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port
>> Controller (re
>> v 80) (prog-if 8f [Master SecP SecO PriP PriO])
>> Subsystem: ASRock Incorporation Device 0591
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32
>> Interrupt: pin B routed to IRQ 10
>> Region 0: I/O ports at e000 [size=8]
>> Region 1: I/O ports at dc00 [size=4]
>> Region 2: I/O ports at d880 [size=8]
>> Region 3: I/O ports at d800 [size=4]
>> Region 4: I/O ports at d480 [size=16]
>> Region 5: I/O ports at d000 [size=256]
>> Capabilities: [c0] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: sata_via
>>
>> 00:0f.1 IDE interface: VIA Technologies, Inc.
>> VT82C586A/B/VT82C686/A/B/VT823x/A/
>> C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP])
>> Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32
>> Region 0: [virtual] Memory at 000001f0 (32-bit,
>> non-prefetchable) [disab
>> led] [size=8]
>> Region 1: [virtual] Memory at 000003f0 (type 3,
>> non-prefetchable) [disab
>> led] [size=1]
>> Region 2: [virtual] Memory at 00000170 (32-bit,
>> non-prefetchable) [disab
>> led] [size=8]
>> Region 3: [virtual] Memory at 00000370 (type 3,
>> non-prefetchable) [disab
>> led] [size=1]
>> Region 4: I/O ports at fc00 [size=16]
>> Capabilities: [c0] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: VIA_IDE
>>
>> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller
>> (rev a0) (prog-if 00 [UHCI])
>> Subsystem: ASRock Incorporation K7VT6
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 11
>> Region 4: I/O ports at e080 [size=32]
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0+,D1+,D2+,D3h
>> ot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller
>> (rev a0) (prog-if 00 [UHCI])
>> Subsystem: ASRock Incorporation K7VT6
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 32 bytes
>> Interrupt: pin B routed to IRQ 10
>> Region 4: I/O ports at e400 [size=32]
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0+,D1+,D2+,D3h
>> ot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller
>> (rev a0) (prog-if 00 [UHCI])
>> Subsystem: ASRock Incorporation K7VT6
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 32 bytes
>> Interrupt: pin C routed to IRQ 10
>> Region 4: I/O ports at e480 [size=32]
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0+,D1+,D2+,D3h
>> ot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller
>> (rev a0) (prog-if 00 [UHCI])
>> Subsystem: ASRock Incorporation K7VT6
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 32 bytes
>> Interrupt: pin D routed to IRQ 10
>> Region 4: I/O ports at ec00 [size=32]
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0+,D1+,D2+,D3h
>> ot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
>> 20 [EHC
>> I])
>> Subsystem: ASRock Incorporation K7VT6 motherboard
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 128 bytes
>> Interrupt: pin C routed to IRQ 10
>> Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [80] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>> PME(D0+,D1+,D2+,D3h
>> ot+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: ehci_hcd
>> Kernel modules: ehci-hcd
>>
>> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
>> Subsystem: ASRock Incorporation Device 3337
>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Capabilities: [c0] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
>> Subsystem: VIA Technologies, Inc. Device 337e
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort+ >SERR- <PERR+ INTx-
>> Latency: 32
>> Capabilities: [58] HyperTransport: Interrupt Discovery and
>> Configuration
>>
>>
>> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
>> (rev 7c)
>> Subsystem: ASRock Incorporation K7VT6 motherboard
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 11
>> Region 0: I/O ports at e800 [size=256]
>> Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [40] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot
>> +,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Kernel driver in use: via-rhine
>> Kernel modules: via-rhine
>>
>> 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR+ FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort+ >SERR- <PERR- INTx-
>> Latency: 0
>> Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+
>>
>> 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2
>> MX200] (
>> rev b2) (prog-if 00 [VGA controller])
>> Subsystem: ABIT Computer Corp. Device 6107
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>>
>> >TAbort- <TAbort
>>
>> - <MAbort- >SERR- <PERR- INTx-
>> Latency: 32 (1250ns min, 250ns max)
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>> Expansion ROM at fe7f0000 [disabled] [size=64K]
>> Capabilities: [60] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot
>> -,D3cold-)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [44] AGP version 2.0
>> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
>> HTrans- 64
>> bit- FW+ AGP3- Rate=x1,x2,x4
>> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
>> FW- Rate=<n
>> one>
>> Kernel modules: nvidiafb
>>
>> 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA
>> High De
>> finition Audio Controller) (rev 10)
>> Subsystem: ASRock Incorporation Device 0888
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Step
>> ping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort-
>> <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 10
>> Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
>> Capabilities: [50] Power Management version 2
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
>> PME(D0+,D1-,D2-,D3ho
>> t+,D3cold+)
>> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0
>> Enable-
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [70] Express (v1) Root Complex Integrated
>> Endpoint, MSI 00
>>
>> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
>> <64ns, L1
>> <1us
>> ExtTag- RBE- FLReset-
>> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupporte
>> d-
>> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>> MaxPayload 128 bytes, MaxReadReq 128 bytes
>> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> AuxPwr+ TransPe
>> nd+
>> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
>> Latency
>> L0 <64ns, L1 <1us
>> ClockPM- Suprise- LLActRep- BwNot-
>> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
>> DLActive
>> - BWMgmt- ABWMgmt-
>> Capabilities: [100] #1106
>> Kernel driver in use: HDA Intel
>> Kernel modules: snd-hda-intel
>>
>>
>> /proc/ioports:
>>
>> 0000-001f : dma1
>> 0020-0021 : pic1
>> 0040-0043 : timer0
>> 0050-0053 : timer1
>> 0060-0060 : keyboard
>> 0064-0064 : keyboard
>> 0070-0077 : rtc
>> 0080-008f : dma page reg
>> 00a0-00a1 : pic2
>> 00c0-00df : dma2
>> 00f0-00ff : fpu
>> 0170-0177 : 0000:00:0f.1
>> 0170-0177 : via82cxxx
>> 01f0-01f7 : 0000:00:0f.1
>> 01f0-01f7 : via82cxxx
>> 0295-0296 : w83627hf
>> 0295-0296 : pnp 00:09
>> 0295-0296 : w83627hf
>> 02f8-02ff : serial
>> 0376-0376 : 0000:00:0f.1
>> 0376-0376 : via82cxxx
>> 03c0-03df : vga+
>> 03e0-03e7 : pnp 00:09
>> 03f2-03f2 : floppy
>> 03f4-03f5 : floppy
>> 03f6-03f6 : 0000:00:0f.1
>> 03f6-03f6 : via82cxxx
>> 03f7-03f7 : floppy
>> 03f8-03ff : serial
>> 0400-041f : pnp 00:09
>> 04d0-04d1 : pnp 00:09
>> 0800-087f : pnp 00:09
>> 0800-0803 : ACPI PM1a_EVT_BLK
>> 0804-0805 : ACPI PM1a_CNT_BLK
>> 0808-080b : ACPI PM_TMR
>> 0810-0815 : ACPI CPU throttle
>> 0820-0823 : ACPI GPE0_BLK
>> 0cf8-0cff : PCI conf1
>> 1000-1fff : PCI Bus 0000:02
>> c800-c8ff : 0000:00:0a.0
>> cc00-cc3f : 0000:00:09.0
>> cc00-cc3f : e1000
>> d000-d0ff : 0000:00:0f.0
>> d000-d0ff : sata_via
>> d400-d47f : 0000:00:0a.0
>> d480-d48f : 0000:00:0f.0
>> d480-d48f : sata_via
>> d800-d803 : 0000:00:0f.0
>> d800-d803 : sata_via
>> d880-d887 : 0000:00:0f.0
>> d880-d887 : sata_via
>> dc00-dc03 : 0000:00:0f.0
>> dc00-dc03 : sata_via
>> e000-e007 : 0000:00:0f.0
>> e000-e007 : sata_via
>> e080-e09f : 0000:00:10.0
>> e400-e41f : 0000:00:10.1
>> e480-e49f : 0000:00:10.2
>> e800-e8ff : 0000:00:12.0
>> e800-e8ff : via-rhine
>> ec00-ec1f : 0000:00:10.3
>> fc00-fc0f : 0000:00:0f.1
>> fc00-fc0f : via82cxxx
>>
>> /proc/iomem:
>>
>> 00000000-0000ffff : reserved
>> 00010000-0009fbff : System RAM
>> 0009fc00-0009ffff : reserved
>> 000a0000-000bffff : Video RAM area
>> 000c0000-000cc7ff : Video ROM
>> 000cc800-000d17ff : Adapter ROM
>> 000d1800-000d27ff : Adapter ROM
>> 000e6000-000fffff : reserved
>> 000f0000-000fffff : System ROM
>> 00100000-3ffaffff : System RAM
>> 01000000-0128c677 : Kernel code
>> 0128c678-0138f533 : Kernel data
>> 013e0000-014131ff : Kernel bss
>> 3ffb0000-3ffbffff : ACPI Tables
>> 3ffc0000-3ffeffff : ACPI Non-volatile Storage
>> 3fff0000-3fffffff : reserved
>> 40000000-401fffff : PCI Bus 0000:02
>> cff00000-dfefffff : PCI Bus 0000:01
>> d0000000-d7ffffff : 0000:01:00.0
>> e0000000-efffffff : PCI MMCONFIG 0 [00-ff]
>> e0000000-efffffff : pnp 00:0e
>> f8000000-fbffffff : 0000:00:00.0
>> fc700000-fe7fffff : PCI Bus 0000:01
>> fd000000-fdffffff : 0000:01:00.0
>> fe7f0000-fe7fffff : 0000:01:00.0
>> fe800000-fe8fffff : PCI Bus 0000:02
>> fe9fc000-fe9fffff : 0000:80:01.0
>> fe9fc000-fe9fffff : pnp 00:09
>> fe9fc000-fe9fffff : ICH HD audio
>> feb60000-feb7ffff : 0000:00:09.0
>> feb80000-feb9ffff : 0000:00:09.0
>> feb80000-feb9ffff : e1000
>> feba0000-febbffff : 0000:00:09.0
>> feba0000-febbffff : e1000
>> febc0000-febdffff : 0000:00:0a.0
>> febe0000-febe7fff : 0000:00:0a.0
>> febfe000-febfefff : 0000:00:0a.0
>> febfe000-febfefff : sata_promise
>> febff000-febff7ff : 0000:00:0c.0
>> febff000-febff7ff : saa7133[0]
>> febff800-febff8ff : 0000:00:10.4
>> febff800-febff8ff : ehci_hcd
>> febffc00-febffcff : 0000:00:12.0
>> febffc00-febffcff : via-rhine
>> fec00000-fec00fff : pnp 00:0a
>> fee00000-fee00fff : reserved
>> fee00000-fee00fff : pnp 00:0a
>> ff780000-ffffffff : reserved
>> ffb80000-ffbfffff : pnp 00:09
>> fff80000-ffffffff : pnp 00:0f
>>
>> /proc/scsi/scsi:
>>
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>> Vendor: ATA Model: ST31500341AS Rev: CC1H
>> Type: Direct-Access ANSI SCSI revision: 05
>> Host: scsi4 Channel: 00 Id: 00 Lun: 00
>> Vendor: ATA Model: ST3500630AS Rev: 3.AA
>> Type: Direct-Access ANSI SCSI revision: 05
>>
>>
>>
>> Thanks for any hints and best regards,
>> -- Axel
>>
>
--
Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi
Download attachment "smime.p7s" of type "application/x-pkcs7-signature" (2124 bytes)
Powered by blists - more mailing lists