[ 0.000000] Linux version 2.6.33-rc8 (dariush@babel) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Sat Feb 13 11:33:05 CET 2010 [ 0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.33-rc8 root=/dev/sda2 ro quiet nmi_watchdog=0 log_buf_len=1024k [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000df65a800 (usable) [ 0.000000] BIOS-e820: 00000000df65a800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0DF700000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdf65a max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000df65a800 (usable) [ 0.000000] modified: 00000000df65a800 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000df65a000 [ 0.000000] 0000000000 - 00df600000 page 2M [ 0.000000] 00df600000 - 00df65a000 page 4k [ 0.000000] kernel direct mapping tables up to df65a000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 1a000-20000 [ 0.000000] ACPI: RSDP 00000000000fbb10 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000df65d200 00064 (v01 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: FACP 00000000df65d09c 000F4 (v04 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000df65d800 06114 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000df66c000 00040 [ 0.000000] ACPI: HPET 00000000df65d300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000df65d400 00068 (v01 DELL M08 27D80B18 ASL 00000047) [ 0.000000] ACPI: ASF! 00000000df65d000 0007E (v32 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000df65d3c0 0003E (v16 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000df65d700 00032 (v01 00000000 ASL 00000000) [ 0.000000] ACPI: SLIC 00000000df65d49c 00176 (v01 DELL M08 27D80B18 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000df65b9c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0002295b20] TEXT DATA BSS ==> [0001000000 - 0002295b20] [ 0.000000] #2 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #3 [0002296000 - 00022961ec] BRK ==> [0002296000 - 00022961ec] [ 0.000000] #4 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #5 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] [ 0.000000] #6 [0000016000 - 000001a000] PGTABLE ==> [0000016000 - 000001a000] [ 0.000000] #7 [000001a000 - 000001b000] PGTABLE ==> [000001a000 - 000001b000] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df65a [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1045994 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 109 pages reserved [ 0.000000] DMA zone: 3819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 896658 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df65a000 - 00000000df65b000 [ 0.000000] PM: Registered nosave memory: 00000000df65b000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79064 r8192 d23336 u1048576 [ 0.000000] pcpu-alloc: s79064 r8192 d23336 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029757 [ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.33-rc8 root=/dev/sda2 ro quiet nmi_watchdog=0 log_buf_len=1024k [ 0.000000] log_buf_len: 1048576 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4030852k/4718592k available (6551k kernel code, 534616k absent, 152172k reserved, 3280k data, 464k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.811 MHz processor. [ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.62 BogoMIPS (lpj=2194811) [ 0.001120] Mount-cache hash table entries: 256 [ 0.002592] CPU: Physical Processor ID: 0 [ 0.002594] CPU: Processor Core ID: 0 [ 0.002597] mce: CPU supports 6 MCE banks [ 0.002604] CPU0: Thermal monitoring enabled (TM2) [ 0.002608] using mwait in idle threads. [ 0.002609] Performance Events: Core2 events, Intel PMU driver. [ 0.002620] ... version: 2 [ 0.002621] ... bit width: 40 [ 0.002622] ... generic registers: 2 [ 0.002624] ... value mask: 000000ffffffffff [ 0.002625] ... max period: 000000007fffffff [ 0.002627] ... fixed-purpose events: 3 [ 0.002628] ... event mask: 0000000700000003 [ 0.002664] ACPI: Core revision 20091214 [ 0.015128] Setting APIC routing to flat [ 0.015538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025634] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.025999] lockdep: fixing up alternatives. [ 0.025999] Booting Node 0, Processors #1 Ok. [ 0.097067] Brought up 2 CPUs [ 0.097070] Total of 2 processors activated (8778.40 BogoMIPS). [ 0.098140] devtmpfs: initialized [ 0.099178] NET: Registered protocol family 16 [ 0.100029] ACPI: bus type pci registered [ 0.100078] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.100082] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.105271] PCI: Using configuration type 1 for base access [ 0.117210] bio: create slab at 0 [ 0.122059] ACPI: EC: Look up EC in DSDT [ 0.122349] ACPI: BIOS _OSI(Linux) query ignored [ 0.166743] ACPI: SSDT 00000000df66c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) [ 0.188026] ACPI: Interpreter enabled [ 0.188030] ACPI: (supports S0 S3 S4 S5) [ 0.188271] ACPI: Using IOAPIC for interrupt routing [ 0.299699] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.319033] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.319139] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.357792] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.357795] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.357798] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.357800] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.357803] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] (ignored) [ 0.357805] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored) [ 0.357808] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored) [ 0.357810] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored) [ 0.357813] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored) [ 0.357815] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) [ 0.357818] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored) [ 0.357820] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored) [ 0.357822] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] (ignored) [ 0.357954] pci 0000:00:02.0: reg 10: [mem 0xf6e00000-0xf6efffff 64bit] [ 0.357964] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.357970] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.358033] pci 0000:00:02.1: reg 10: [mem 0xf6f00000-0xf6ffffff 64bit] [ 0.358203] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.358285] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.358369] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.358450] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.358457] pci 0000:00:1a.7: PME# disabled [ 0.358514] pci 0000:00:1b.0: reg 10: [mem 0xf6dfc000-0xf6dfffff 64bit] [ 0.358593] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.358599] pci 0000:00:1b.0: PME# disabled [ 0.358722] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.358727] pci 0000:00:1c.0: PME# disabled [ 0.358854] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.358860] pci 0000:00:1c.1: PME# disabled [ 0.358995] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.359004] pci 0000:00:1c.5: PME# disabled [ 0.359082] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.359164] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.359246] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.359329] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.359410] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.359417] pci 0000:00:1d.7: PME# disabled [ 0.359622] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.359627] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.359632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.359639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.359705] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.359715] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.359724] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.359733] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.359743] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.359824] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.359833] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.359843] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.359852] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.359862] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.359871] pci 0000:00:1f.2: reg 24: [mem 0xf6dfb800-0xf6dfbfff] [ 0.359927] pci 0000:00:1f.2: PME# supported from D3hot [ 0.359932] pci 0000:00:1f.2: PME# disabled [ 0.359972] pci 0000:00:1f.3: reg 10: [mem 0xf6dfb700-0xf6dfb7ff] [ 0.360010] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.360147] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.360311] pci 0000:0c:00.0: reg 10: [mem 0xf6cfe000-0xf6cfffff 64bit] [ 0.360527] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.360542] pci 0000:0c:00.0: PME# disabled [ 0.360675] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.360685] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6cfffff] [ 0.360773] pci 0000:09:00.0: reg 10: [mem 0xf6bf0000-0xf6bfffff 64bit] [ 0.360900] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.360907] pci 0000:09:00.0: PME# disabled [ 0.361015] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.361025] pci 0000:00:1c.5: bridge window [mem 0xf6b00000-0xf6bfffff] [ 0.361141] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.361190] pci_bus 0000:00: on NUMA node 0 [ 0.361196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.361657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.361939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.362058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.362193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.388207] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.388389] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.388569] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) [ 0.389073] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.389254] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.389437] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.389620] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.389780] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.390325] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.390325] vgaarb: loaded [ 0.390325] SCSI subsystem initialized [ 0.390325] libata version 3.00 loaded. [ 0.391031] usbcore: registered new interface driver usbfs [ 0.391044] usbcore: registered new interface driver hub [ 0.391057] usbcore: registered new device driver usb [ 0.391108] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 0.391108] PCI: Using ACPI for IRQ routing [ 0.391108] PCI: pci_cache_line_size set to 64 bytes [ 0.392197] Bluetooth: Core ver 2.15 [ 0.392197] NET: Registered protocol family 31 [ 0.392197] Bluetooth: HCI device and connection manager initialized [ 0.392197] Bluetooth: HCI socket layer initialized [ 0.392197] cfg80211: Calling CRDA to update world regulatory domain [ 0.393055] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.393055] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.393055] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.396082] Switching to clocksource tsc [ 0.396231] pnp: PnP ACPI init [ 0.396255] ACPI: bus type pnp registered [ 0.464781] pnp 00:0b: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.464785] pnp 00:0b: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.465012] pnp 00:0c: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.465016] pnp 00:0c: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.465019] pnp 00:0c: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.465022] pnp 00:0c: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f] [ 0.491411] pnp: PnP ACPI: found 14 devices [ 0.491415] ACPI: ACPI bus type pnp unregistered [ 0.491431] system 00:05: [io 0x0c80-0x0caf] has been reserved [ 0.491434] system 00:05: [io 0x0cc0-0x0cff] could not be reserved [ 0.491446] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.491458] system 00:0a: [io 0x0cb0-0x0cbb] has been reserved [ 0.491462] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.491471] system 00:0b: [io 0x0900-0x097f] has been reserved [ 0.491474] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.491483] system 00:0c: [io 0xf400-0xf4fe] has been reserved [ 0.491486] system 00:0c: [io 0x1080-0x10bf] has been reserved [ 0.491489] system 00:0c: [io 0x10c0-0x10df] has been reserved [ 0.491492] system 00:0c: [io 0x0809] has been reserved [ 0.491501] system 00:0d: [mem 0x00000000-0x0009efff] could not be reserved [ 0.491505] system 00:0d: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.491508] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved [ 0.491511] system 00:0d: [mem 0x000e0000-0x000fffff] has been reserved [ 0.491514] system 00:0d: [mem 0x00100000-0xdf65a7ff] could not be reserved [ 0.491517] system 00:0d: [mem 0xdf65a800-0xdf6fffff] has been reserved [ 0.491519] system 00:0d: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.491523] system 00:0d: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.491526] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved [ 0.491529] system 00:0d: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.491532] system 00:0d: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.491535] system 00:0d: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.491538] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.491540] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.491543] system 00:0d: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.491546] system 00:0d: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.491549] system 00:0d: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.491552] system 00:0d: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.491555] system 00:0d: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.491558] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.497001] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0000000-0xf01fffff] [ 0.497006] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.497009] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.497012] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.497015] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.497018] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] [ 0.497021] pci 0000:00:1c.5: BAR 7: assigned [io 0x4000-0x4fff] [ 0.497024] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.497028] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.497036] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.497042] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.497052] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.497056] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.497063] pci 0000:00:1c.1: bridge window [mem 0xf6c00000-0xf6cfffff] [ 0.497069] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.497079] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.497083] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff] [ 0.497091] pci 0000:00:1c.5: bridge window [mem 0xf6b00000-0xf6bfffff] [ 0.497097] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.497106] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.497108] pci 0000:00:1e.0: bridge window [io disabled] [ 0.497115] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.497120] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.497144] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.497151] pci 0000:00:1c.0: setting latency timer to 64 [ 0.497166] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.497172] pci 0000:00:1c.1: setting latency timer to 64 [ 0.497185] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.497190] pci 0000:00:1c.5: setting latency timer to 64 [ 0.497201] pci 0000:00:1e.0: setting latency timer to 64 [ 0.497205] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.497207] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.497210] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] [ 0.497212] pci_bus 0000:0b: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.497214] pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.497217] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] [ 0.497219] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff] [ 0.497221] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.497224] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff] [ 0.497226] pci_bus 0000:09: resource 1 [mem 0xf6b00000-0xf6bfffff] [ 0.497228] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.497230] pci_bus 0000:03: resource 3 [io 0x0000-0xffff] [ 0.497233] pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 0.497283] NET: Registered protocol family 2 [ 0.497456] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.498273] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.500007] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.505161] TCP: Hash tables configured (established 262144 bind 65536) [ 0.505216] TCP reno registered [ 0.505225] UDP hash table entries: 2048 (order: 6, 262144 bytes) [ 0.505558] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes) [ 0.506086] NET: Registered protocol family 1 [ 0.506317] RPC: Registered udp transport module. [ 0.506319] RPC: Registered tcp transport module. [ 0.506321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.506341] pci 0000:00:02.0: Boot video device [ 0.506598] PCI: CLS 64 bytes, default 64 [ 0.506672] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.506676] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.506678] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.507906] Scanning for low memory corruption every 60 seconds [ 0.508279] Intel AES-NI instructions are not detected. [ 0.515570] Slow work thread pool: Starting up [ 0.515683] Slow work thread pool: Ready [ 0.515685] NTFS driver 2.1.29 [Flags: R/W]. [ 0.515877] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.516050] fuse init (API version 7.13) [ 0.516383] msgmni has been set to 7874 [ 0.516764] alg: No test for cipher_null (cipher_null-generic) [ 0.516798] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 0.516831] alg: No test for digest_null (digest_null-generic) [ 0.516863] alg: No test for compress_null (compress_null-generic) [ 0.517906] alg: No test for fcrypt (fcrypt-generic) [ 0.520098] alg: No test for stdrng (krng) [ 0.527433] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.527506] io scheduler noop registered [ 0.527508] io scheduler deadline registered [ 0.527694] io scheduler cfq registered (default) [ 0.527943] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.528016] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.528295] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.528363] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.528614] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.528682] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X [ 0.529803] ACPI: AC Adapter [AC] (on-line) [ 0.530166] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.530694] ACPI: Lid Switch [LID] [ 0.530811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.530819] ACPI: Power Button [PBTN] [ 0.530925] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.530929] ACPI: Sleep Button [SBTN] [ 0.531675] ACPI: SSDT 00000000df65c4f6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.533211] ACPI: SSDT 00000000df65be8c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.534587] Monitor-Mwait will be used to enter C-1 state [ 0.534623] Monitor-Mwait will be used to enter C-2 state [ 0.534661] Monitor-Mwait will be used to enter C-3 state [ 0.534673] Marking TSC unstable due to TSC halts in idle [ 0.534933] Switching to clocksource hpet [ 0.535857] ACPI: SSDT 00000000df65c77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.537199] ACPI: SSDT 00000000df65c471 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.602858] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.602873] ACPI: Thermal Zone [THM] (80 C) [ 0.603117] ACPI: Battery Slot [BAT0] (battery absent) [ 0.603185] ACPI: Battery Slot [BAT1] (battery absent) [ 0.653555] Non-volatile memory driver v1.3 [ 0.653558] Linux agpgart interface v0.103 [ 0.653668] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.654945] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 0.659869] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.660052] [drm] Initialized drm 1.1.0 20060810 [ 0.660083] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.660088] i915 0000:00:02.0: setting latency timer to 64 [ 0.698549] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 0.698560] [drm] set up 7M of stolen space [ 0.822389] composite sync not supported [ 1.155416] [drm] initialized overlay support [ 2.198188] Console: switching to colour frame buffer device 160x64 [ 2.202034] fb0: inteldrmfb frame buffer device [ 2.202036] registered panic notifier [ 2.203567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3 [ 2.203576] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 2.203617] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 2.203692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.203779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.204047] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.205792] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.207775] loop: module loaded [ 2.208389] ahci 0000:00:1f.2: version 3.0 [ 2.208412] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.208473] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 2.208557] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 2.208561] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 2.208567] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.210332] scsi0 : ahci [ 2.210703] scsi1 : ahci [ 2.210886] scsi2 : ahci [ 2.211428] ata1: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 28 [ 2.211431] ata2: DUMMY [ 2.211434] ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 28 [ 2.211547] ata_piix 0000:00:1f.1: version 2.13 [ 2.211556] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.211600] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.211690] scsi3 : ata_piix [ 2.211862] scsi4 : ata_piix [ 2.214512] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 2.214515] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 2.214638] ata5: port disabled. ignoring. [ 2.214779] tg3.c:v3.106 (January 12, 2010) [ 2.214796] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.214805] tg3 0000:09:00.0: setting latency timer to 64 [ 2.222233] eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:21:0f:40 [ 2.222236] eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 2.222239] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.222241] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.222320] PPP generic driver version 2.4.2 [ 2.222559] PPP Deflate Compression module registered [ 2.222562] PPP BSD Compression module registered [ 2.222867] PPP MPPE Compression module registered [ 2.222870] NET: Registered protocol family 24 [ 2.222889] PPPoL2TP kernel driver, V1.0 [ 2.222891] tun: Universal TUN/TAP device driver, 1.6 [ 2.222892] tun: (C) 1999-2004 Max Krasnyansky [ 2.223033] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33-rc8-kd [ 2.223036] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 2.223140] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.223159] iwlagn 0000:0c:00.0: setting latency timer to 64 [ 2.223209] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 2.266466] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 2.266639] iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X [ 2.267442] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2.268379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.268410] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.268426] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.268431] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.268543] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.268608] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.272500] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.272520] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 2.282031] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.283000] hub 1-0:1.0: USB hub found [ 2.283020] hub 1-0:1.0: 4 ports detected [ 2.283288] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.283304] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.283308] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.283319] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.283354] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.287240] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.287259] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 2.298018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.298319] hub 2-0:1.0: USB hub found [ 2.298327] hub 2-0:1.0: 6 ports detected [ 2.298485] uhci_hcd: USB Universal Host Controller Interface driver [ 2.298606] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.298615] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.298619] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.298629] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.298660] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 2.298969] hub 3-0:1.0: USB hub found [ 2.299023] hub 3-0:1.0: 2 ports detected [ 2.299138] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.299147] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.299151] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.299160] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.299202] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 2.299507] hub 4-0:1.0: USB hub found [ 2.299515] hub 4-0:1.0: 2 ports detected [ 2.299610] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.299619] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.299623] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.299632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.299663] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 2.300026] hub 5-0:1.0: USB hub found [ 2.300034] hub 5-0:1.0: 2 ports detected [ 2.300126] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.300135] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.300139] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.300148] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.300179] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 2.300477] hub 6-0:1.0: USB hub found [ 2.300485] hub 6-0:1.0: 2 ports detected [ 2.300581] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.300590] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.300594] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.300603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.300633] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 2.300941] hub 7-0:1.0: USB hub found [ 2.300950] hub 7-0:1.0: 2 ports detected [ 2.301182] usbcore: registered new interface driver usblp [ 2.301185] Initializing USB Mass Storage driver... [ 2.301314] usbcore: registered new interface driver usb-storage [ 2.301316] USB Mass Storage support registered. [ 2.301378] usbcore: registered new interface driver ums-alauda [ 2.301439] usbcore: registered new interface driver ums-cypress [ 2.301500] usbcore: registered new interface driver ums-datafab [ 2.301561] usbcore: registered new interface driver ums-freecom [ 2.301621] usbcore: registered new interface driver ums-isd200 [ 2.301684] usbcore: registered new interface driver ums-jumpshot [ 2.301745] usbcore: registered new interface driver ums-karma [ 2.301806] usbcore: registered new interface driver ums-onetouch [ 2.301869] usbcore: registered new interface driver ums-sddr09 [ 2.301934] usbcore: registered new interface driver ums-sddr55 [ 2.301997] usbcore: registered new interface driver ums-usbat [ 2.302142] usbcore: registered new interface driver usbserial [ 2.302198] USB Serial support registered for generic [ 2.302281] usbcore: registered new interface driver usbserial_generic [ 2.302283] usbserial: USB Serial Driver core [ 2.302435] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.306033] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.306062] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.306405] mice: PS/2 mouse device common for all mice [ 2.307417] rtc_cmos 00:03: RTC can wake from S4 [ 2.307600] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.307644] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.307702] Bluetooth: HCI UART driver ver 2.2 [ 2.307705] Bluetooth: HCI H4 protocol initialized [ 2.307706] Bluetooth: HCI BCSP protocol initialized [ 2.307708] Bluetooth: HCILL protocol initialized [ 2.307710] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.307779] usbcore: registered new interface driver btusb [ 2.308306] cpuidle: using governor ladder [ 2.309249] cpuidle: using governor menu [ 2.309566] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 2.310189] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.312030] wacom driver registered [ 2.312242] usbcore: registered new interface driver usbhid [ 2.312244] usbhid: USB HID core driver [ 2.313138] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.313215] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X [ 2.313263] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.355733] ALSA device list: [ 2.355735] #0: HDA Intel at 0xf6dfc000 irq 30 [ 2.356417] IPv4 over IPv4 tunneling driver [ 2.357236] GRE over IPv4 tunneling driver [ 2.357884] TCP cubic registered [ 2.357886] Initializing XFRM netlink socket [ 2.358415] NET: Registered protocol family 10 [ 2.359573] lo: Disabled Privacy Extensions [ 2.361388] tunl0: Disabled Privacy Extensions [ 2.362940] Mobile IPv6 [ 2.362943] IPv6 over IPv4 tunneling driver [ 2.363753] sit0: Disabled Privacy Extensions [ 2.365517] ip6tnl0: Disabled Privacy Extensions [ 2.366265] NET: Registered protocol family 17 [ 2.366298] NET: Registered protocol family 15 [ 2.366367] Bluetooth: L2CAP ver 2.14 [ 2.366369] Bluetooth: L2CAP socket layer initialized [ 2.366373] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.366374] Bluetooth: SCO socket layer initialized [ 2.372923] Bluetooth: RFCOMM TTY layer initialized [ 2.372927] Bluetooth: RFCOMM socket layer initialized [ 2.372929] Bluetooth: RFCOMM ver 1.11 [ 2.372930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.372932] Bluetooth: BNEP filters: protocol multicast [ 2.372934] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.373331] NET: Registered protocol family 33 [ 2.373608] RxRPC: Registered security type 2 'rxkad' [ 2.373611] 802.1Q VLAN Support v1.8 Ben Greear [ 2.373613] All bugs added by David S. Miller [ 2.373641] lib80211: common routines for IEEE802.11 drivers [ 2.373652] lib80211_crypt: registered algorithm 'NULL' [ 2.378683] kAFS: Red Hat AFS client v0.1 registering. [ 2.379824] rtc_cmos 00:03: setting system clock to 2010-02-13 16:03:07 UTC (1266076987) [ 2.516208] ata3: SATA link down (SStatus 0 SControl 300) [ 2.516228] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.517372] ata1.00: ATA-7: ST9120822AS, 3.CDE, max UDMA/133 [ 2.517380] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 2.518750] ata1.00: configured for UDMA/133 [ 2.530635] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.CD PQ: 0 ANSI: 5 [ 2.533002] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.533265] sd 0:0:0:0: [sda] Write Protect is off [ 2.533272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.533370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.534427] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.534931] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.565558] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.586300] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 2.701922] hub 1-3:1.0: USB hub found [ 2.702103] hub 1-3:1.0: 4 ports detected [ 2.905609] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5 [ 2.927764] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.966284] usb 1-3.1: new high speed USB device using ehci_hcd and address 3 [ 2.973152] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 2.973380] VFS: Mounted root (ext2 filesystem) readonly on device 8:2. [ 3.001434] devtmpfs: mounted [ 3.001504] Freeing unused kernel memory: 464k freed [ 3.043388] hub 1-3.1:1.0: USB hub found [ 3.043728] hub 1-3.1:1.0: 4 ports detected [ 3.108286] usb 1-3.3: new full speed USB device using ehci_hcd and address 4 [ 3.191863] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018C [ 3.193252] scsi5 : usb-storage 1-3.3:1.2 [ 3.400200] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 3.540279] hub 7-1:1.0: USB hub found [ 3.541799] hub 7-1:1.0: 4 ports detected [ 3.610553] usb 1-3.1.1: new low speed USB device using ehci_hcd and address 5 [ 3.699043] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.0/input/input7 [ 3.699764] generic-usb 0003:046D:C404.0001: input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.7-3.1.1/input0 [ 3.763657] usb 1-3.1.2: new low speed USB device using ehci_hcd and address 6 [ 3.852692] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input8 [ 3.853557] generic-usb 0003:046D:C313.0002: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.7-3.1.2/input0 [ 3.857494] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.1/input/input9 [ 3.857964] generic-usb 0003:046D:C313.0003: input: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.7-3.1.2/input1 [ 3.924891] usb 7-1.2: new full speed USB device using uhci_hcd and address 3 [ 8.202995] scsi 5:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2 [ 8.206792] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 8.241658] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 14.002529] udev: starting version 150 [ 16.283535] Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1 across:2048248k [ 17.118426] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 17.154901] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended [ 17.155432] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 17.201071] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended [ 17.202412] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 20.689709] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 20.694831] iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24 [ 23.325471] cfg80211: Calling CRDA for country: DE [ 23.365734] cfg80211: Regulatory domain changed to country: DE [ 23.365743] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.365750] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.365757] (5150000 KHz - 5255000 KHz @ 40000 KHz), (N/A, 2301 mBm) [ 23.365763] (5470000 KHz - 5650000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 24.851596] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.858342] tg3 0000:09:00.0: irq 31 for MSI/MSI-X [ 24.894850] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.948157] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 27.948157] tg3: eth0: Flow control is on for TX and on for RX. [ 27.949382] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.751894] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 31.752380] cfg80211: Calling CRDA for country: DE [ 31.758344] cfg80211: Current regulatory domain updated by AP to: DE [ 31.758352] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.758359] (5170000 KHz - 5190000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758366] (5180000 KHz - 5200000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758372] (5190000 KHz - 5210000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758378] (5210000 KHz - 5230000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758384] (5220000 KHz - 5240000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758390] (5230000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2301 mBm) [ 31.758397] (5250000 KHz - 5255000 KHz @ 5000 KHz), (N/A, 2301 mBm) [ 31.758403] (5490000 KHz - 5510000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758409] (5500000 KHz - 5520000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758415] (5510000 KHz - 5530000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758421] (5530000 KHz - 5550000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758427] (5540000 KHz - 5560000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758434] (5550000 KHz - 5570000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758440] (5570000 KHz - 5590000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758446] (5580000 KHz - 5600000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758452] (5590000 KHz - 5610000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758458] (5610000 KHz - 5630000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758464] (5620000 KHz - 5640000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 31.758471] (5630000 KHz - 5650000 KHz @ 20000 KHz), (N/A, 3000 mBm) [ 41.270085] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 73.483939] [ 73.483942] ======================================================= [ 73.483945] [ INFO: possible circular locking dependency detected ] [ 73.483948] 2.6.33-rc8 #2 [ 73.483950] ------------------------------------------------------- [ 73.483952] kacpi_hotplug/253 is trying to acquire lock: [ 73.483954] (kacpid){+.+.+.}, at: [] flush_workqueue+0x0/0xb0 [ 73.483963] [ 73.483963] but task is already holding lock: [ 73.483965] ((&dpc->work)){+.+.+.}, at: [] worker_thread+0x189/0x320 [ 73.483971] [ 73.483971] which lock already depends on the new lock. [ 73.483972] [ 73.483973] [ 73.483974] the existing dependency chain (in reverse order) is: [ 73.483976] [ 73.483977] -> #1 ((&dpc->work)){+.+.+.}: [ 73.483981] [] __lock_acquire+0x13c4/0x1cd0 [ 73.483986] [] lock_acquire+0x5c/0x80 [ 73.483989] [] worker_thread+0x1d5/0x320 [ 73.483993] [] kthread+0x96/0xb0 [ 73.483996] [] kernel_thread_helper+0x4/0x10 [ 73.484001] [ 73.484002] -> #0 (kacpid){+.+.+.}: [ 73.484005] [] __lock_acquire+0x1c7c/0x1cd0 [ 73.484005] [] lock_acquire+0x5c/0x80 [ 73.484005] [] flush_workqueue+0x4e/0xb0 [ 73.484005] [] acpi_os_wait_events_complete+0x10/0x1e [ 73.484005] [] acpi_os_execute_deferred+0x1d/0x31 [ 73.484005] [] worker_thread+0x1db/0x320 [ 73.484005] [] kthread+0x96/0xb0 [ 73.484005] [] kernel_thread_helper+0x4/0x10 [ 73.484005] [ 73.484005] other info that might help us debug this: [ 73.484005] [ 73.484005] 2 locks held by kacpi_hotplug/253: [ 73.484005] #0: (kacpi_hotplug){+.+...}, at: [] worker_thread+0x189/0x320 [ 73.484005] #1: ((&dpc->work)){+.+.+.}, at: [] worker_thread+0x189/0x320 [ 73.484005] [ 73.484005] stack backtrace: [ 73.484005] Pid: 253, comm: kacpi_hotplug Not tainted 2.6.33-rc8 #2 [ 73.484005] Call Trace: [ 73.484005] [] print_circular_bug+0x100/0x110 [ 73.484005] [] __lock_acquire+0x1c7c/0x1cd0 [ 73.484005] [] ? worker_thread+0x189/0x320 [ 73.484005] [] ? __lock_acquire+0x1455/0x1cd0 [ 73.484005] [] ? acpi_os_execute_deferred+0x0/0x31 [ 73.484005] [] lock_acquire+0x5c/0x80 [ 73.484005] [] ? flush_workqueue+0x0/0xb0 [ 73.484005] [] flush_workqueue+0x4e/0xb0 [ 73.484005] [] ? flush_workqueue+0x0/0xb0 [ 73.484005] [] acpi_os_wait_events_complete+0x10/0x1e [ 73.484005] [] acpi_os_execute_deferred+0x1d/0x31 [ 73.484005] [] worker_thread+0x1db/0x320 [ 73.484005] [] ? worker_thread+0x189/0x320 [ 73.484005] [] ? schedule+0x3c6/0xa80 [ 73.484005] [] ? autoremove_wake_function+0x0/0x40 [ 73.484005] [] ? trace_hardirqs_on+0xd/0x10 [ 73.484005] [] ? worker_thread+0x0/0x320 [ 73.484005] [] kthread+0x96/0xb0 [ 73.484005] [] kernel_thread_helper+0x4/0x10 [ 73.484005] [] ? restore_args+0x0/0x30 [ 73.484005] [] ? kthread+0x0/0xb0 [ 73.484005] [] ? kernel_thread_helper+0x0/0x10