| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <9b889787bedb71e606928eb956861eb6292583f7.1266454576.git.joe@perches.com>
Date: Wed, 17 Feb 2010 17:01:51 -0800
From: Joe Perches <joe@...ches.com>
To: netdev@...r.kernel.org
Cc: Michael Chan <mchan@...adcom.com>, linux-kernel@...r.kernel.org
Subject: [PATCH net-next 04/15] drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpers
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Coalesce some printks
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/bnx2.c | 145 ++++++++++++++++++++++------------------------------
1 files changed, 61 insertions(+), 84 deletions(-)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5f0dda1..a6cc9d0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -9,6 +9,7 @@
* Written by: Michael Chan (mchan@...adcom.com)
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -57,7 +58,6 @@
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "2.0.8"
#define DRV_MODULE_RELDATE "Feb 15, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j6.fw"
@@ -979,33 +979,27 @@ bnx2_report_link(struct bnx2 *bp)
{
if (bp->link_up) {
netif_carrier_on(bp->dev);
- printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name,
- bnx2_xceiver_str(bp));
-
- printk("%d Mbps ", bp->line_speed);
-
- if (bp->duplex == DUPLEX_FULL)
- printk("full duplex");
- else
- printk("half duplex");
+ netdev_info(bp->dev, "NIC %s Link is Up, %d Mbps %s duplex",
+ bnx2_xceiver_str(bp),
+ bp->line_speed,
+ bp->duplex == DUPLEX_FULL ? "full" : "half");
if (bp->flow_ctrl) {
if (bp->flow_ctrl & FLOW_CTRL_RX) {
- printk(", receive ");
+ pr_cont(", receive ");
if (bp->flow_ctrl & FLOW_CTRL_TX)
- printk("& transmit ");
+ pr_cont("& transmit ");
}
else {
- printk(", transmit ");
+ pr_cont(", transmit ");
}
- printk("flow control ON");
+ pr_cont("flow control ON");
}
- printk("\n");
- }
- else {
+ pr_cont("\n");
+ } else {
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name,
- bnx2_xceiver_str(bp));
+ netdev_err(bp->dev, "NIC %s Link is Down\n",
+ bnx2_xceiver_str(bp));
}
bnx2_report_fw_link(bp);
@@ -2482,8 +2476,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
/* If we timed out, inform the firmware that this is the case. */
if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
if (!silent)
- printk(KERN_ERR PFX "fw sync timeout, reset code = "
- "%x\n", msg_data);
+ pr_err("fw sync timeout, reset code = %x\n", msg_data);
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
@@ -2599,8 +2592,7 @@ bnx2_alloc_bad_rbuf(struct bnx2 *bp)
good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL);
if (good_mbuf == NULL) {
- printk(KERN_ERR PFX "Failed to allocate memory in "
- "bnx2_alloc_bad_rbuf\n");
+ pr_err("Failed to allocate memory in %s\n", __func__);
return -ENOMEM;
}
@@ -3656,15 +3648,13 @@ bnx2_request_firmware(struct bnx2 *bp)
rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
- mips_fw_file);
+ pr_err("Can't load firmware file \"%s\"\n", mips_fw_file);
return rc;
}
rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
- rv2p_fw_file);
+ pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file);
return rc;
}
mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
@@ -3675,15 +3665,13 @@ bnx2_request_firmware(struct bnx2 *bp)
check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) ||
check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) ||
check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) {
- printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
- mips_fw_file);
+ pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file);
return -EINVAL;
}
if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) ||
check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) ||
check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) {
- printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
- rv2p_fw_file);
+ pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file);
return -EINVAL;
}
@@ -4317,7 +4305,7 @@ bnx2_init_nvram(struct bnx2 *bp)
if (j == entry_count) {
bp->flash_info = NULL;
- printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n");
+ pr_alert("Unknown flash/EEPROM type\n");
return -ENODEV;
}
@@ -4737,7 +4725,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
- printk(KERN_ERR PFX "Chip reset did not complete\n");
+ pr_err("Chip reset did not complete\n");
return -EBUSY;
}
}
@@ -4745,7 +4733,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
/* Make sure byte swapping is properly configured. */
val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0);
if (val != 0x01020304) {
- printk(KERN_ERR PFX "Chip not in correct endian mode\n");
+ pr_err("Chip not in correct endian mode\n");
return -ENODEV;
}
@@ -5166,9 +5154,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
ring_prod = prod = rxr->rx_pg_prod;
for (i = 0; i < bp->rx_pg_ring_size; i++) {
if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0) {
- printk(KERN_WARNING PFX "%s: init'ed rx page ring %d "
- "with %d/%d pages only\n",
- bp->dev->name, ring_num, i, bp->rx_pg_ring_size);
+ netdev_warn(bp->dev, "init'ed rx page ring %d with %d/%d pages only\n",
+ ring_num, i, bp->rx_pg_ring_size);
break;
}
prod = NEXT_RX_BD(prod);
@@ -5179,9 +5166,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
ring_prod = prod = rxr->rx_prod;
for (i = 0; i < bp->rx_ring_size; i++) {
if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0) {
- printk(KERN_WARNING PFX "%s: init'ed rx ring %d with "
- "%d/%d skbs only\n",
- bp->dev->name, ring_num, i, bp->rx_ring_size);
+ netdev_warn(bp->dev, "init'ed rx ring %d with %d/%d skbs only\n",
+ ring_num, i, bp->rx_ring_size);
break;
}
prod = NEXT_RX_BD(prod);
@@ -6239,11 +6225,7 @@ bnx2_open(struct net_device *dev)
* If MSI test fails, go back to INTx mode
*/
if (bnx2_test_intr(bp) != 0) {
- printk(KERN_WARNING PFX "%s: No interrupt was generated"
- " using MSI, switching to INTx mode. Please"
- " report this failure to the PCI maintainer"
- " and include system chipset information.\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.\n");
bnx2_disable_int(bp);
bnx2_free_irq(bp);
@@ -6263,9 +6245,9 @@ bnx2_open(struct net_device *dev)
}
}
if (bp->flags & BNX2_FLAG_USING_MSI)
- printk(KERN_INFO PFX "%s: using MSI\n", dev->name);
+ netdev_info(dev, "using MSI\n");
else if (bp->flags & BNX2_FLAG_USING_MSIX)
- printk(KERN_INFO PFX "%s: using MSIX\n", dev->name);
+ netdev_info(dev, "using MSIX\n");
netif_tx_start_all_queues(dev);
@@ -6304,20 +6286,18 @@ bnx2_dump_state(struct bnx2 *bp)
{
struct net_device *dev = bp->dev;
- printk(KERN_ERR PFX "%s DEBUG: intr_sem[%x]\n", dev->name,
- atomic_read(&bp->intr_sem));
- printk(KERN_ERR PFX "%s DEBUG: EMAC_TX_STATUS[%08x] "
- "RPM_MGMT_PKT_CTRL[%08x]\n", dev->name,
- REG_RD(bp, BNX2_EMAC_TX_STATUS),
- REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
- printk(KERN_ERR PFX "%s DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
- dev->name, bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
- bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
- printk(KERN_ERR PFX "%s DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
- dev->name, REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
+ netdev_err(dev, "DEBUG: intr_sem[%x]\n", atomic_read(&bp->intr_sem));
+ netdev_err(dev, "DEBUG: EMAC_TX_STATUS[%08x] RPM_MGMT_PKT_CTRL[%08x]\n",
+ REG_RD(bp, BNX2_EMAC_TX_STATUS),
+ REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
+ netdev_err(dev, "DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
+ bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
+ bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
+ netdev_err(dev, "DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
+ REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
if (bp->flags & BNX2_FLAG_USING_MSIX)
- printk(KERN_ERR PFX "%s DEBUG: PBA[%08x]\n", dev->name,
- REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
+ netdev_err(dev, "DEBUG: PBA[%08x]\n",
+ REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
}
static void
@@ -6381,8 +6361,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(bnx2_tx_avail(bp, txr) <
(skb_shinfo(skb)->nr_frags + 1))) {
netif_tx_stop_queue(txq);
- printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, "BUG! Tx ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
@@ -7869,20 +7848,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
/* enable device (incl. PCI PM wakeup), and bus-mastering */
rc = pci_enable_device(pdev);
if (rc) {
- dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+ dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
goto err_out;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(&pdev->dev,
- "Cannot find PCI device base address, aborting.\n");
+ "Cannot find PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
if (rc) {
- dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
goto err_out_disable;
}
@@ -7892,7 +7871,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
dev_err(&pdev->dev,
- "Cannot find power management capability, aborting.\n");
+ "Cannot find power management capability, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -7915,7 +7894,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->regview = ioremap_nocache(dev->base_addr, mem_len);
if (!bp->regview) {
- dev_err(&pdev->dev, "Cannot map register space, aborting.\n");
+ dev_err(&pdev->dev, "Cannot map register space, aborting\n");
rc = -ENOMEM;
goto err_out_release;
}
@@ -7935,7 +7914,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
if (pci_find_capability(pdev, PCI_CAP_ID_EXP) == 0) {
dev_err(&pdev->dev,
- "Cannot find PCIE capability, aborting.\n");
+ "Cannot find PCIE capability, aborting\n");
rc = -EIO;
goto err_out_unmap;
}
@@ -7946,7 +7925,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
if (bp->pcix_cap == 0) {
dev_err(&pdev->dev,
- "Cannot find PCIX capability, aborting.\n");
+ "Cannot find PCIX capability, aborting\n");
rc = -EIO;
goto err_out_unmap;
}
@@ -7975,11 +7954,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask);
if (rc) {
dev_err(&pdev->dev,
- "pci_set_consistent_dma_mask failed, aborting.\n");
+ "pci_set_consistent_dma_mask failed, aborting\n");
goto err_out_unmap;
}
} else if ((rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
- dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
+ dev_err(&pdev->dev, "System does not support DMA, aborting\n");
goto err_out_unmap;
}
@@ -7996,7 +7975,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
!(bp->flags & BNX2_FLAG_PCIX)) {
dev_err(&pdev->dev,
- "5706 A1 can only be used in a PCIX bus, aborting.\n");
+ "5706 A1 can only be used in a PCIX bus, aborting\n");
goto err_out_unmap;
}
@@ -8019,7 +7998,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BNX2_DEV_INFO_SIGNATURE_MAGIC) {
- dev_err(&pdev->dev, "Firmware not running, aborting.\n");
+ dev_err(&pdev->dev, "Firmware not running, aborting\n");
rc = -ENODEV;
goto err_out_unmap;
}
@@ -8292,7 +8271,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
char str[40];
if (version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
/* dev zeroed in init_etherdev */
dev = alloc_etherdev_mq(sizeof(*bp), TX_MAX_RINGS);
@@ -8342,15 +8321,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto error;
}
- printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, "
- "IRQ %d, node addr %pM\n",
- dev->name,
- board_info[ent->driver_data].name,
- ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
- ((CHIP_ID(bp) & 0x0ff0) >> 4),
- bnx2_bus_string(bp, str),
- dev->base_addr,
- bp->pdev->irq, dev->dev_addr);
+ netdev_info(dev, "%s (%c%d) %s found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
+ ((CHIP_ID(bp) & 0x0ff0) >> 4),
+ bnx2_bus_string(bp, str),
+ dev->base_addr,
+ bp->pdev->irq, dev->dev_addr);
return 0;
@@ -8485,7 +8462,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
rtnl_lock();
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev,
- "Cannot re-enable PCI device after reset.\n");
+ "Cannot re-enable PCI device after reset\n");
rtnl_unlock();
return PCI_ERS_RESULT_DISCONNECT;
}
--
1.7.0.14.g7e948
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists